← Commit history

Initial commit: component/mcp23017t-e

Ray ·bcc34c4a38 ·
2 files changed +110
README.mdadded+76
@@ -0,0 +1,76 @@+# MCP23017T-E++**Microchip Tech** · I/O Expanders · SSOP-28++MCP23017T-E from Microchip Tech, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GPB0 | bidirectional | Port B bit 0. Bidirectional I/O with optional interrupt-on-change and internal weak pull-up (typ. 75 uA @ VDD=5V). Default is input after POR/RESET. |+| 2 | GPB1 | bidirectional | Port B bit 1. Bidirectional I/O with optional interrupt-on-change and internal weak pull-up. |+| 3 | GPB2 | bidirectional | Port B bit 2. Bidirectional I/O with optional interrupt-on-change and internal weak pull-up. |+| 4 | GPB3 | bidirectional | Port B bit 3. Bidirectional I/O with optional interrupt-on-change and internal weak pull-up. |+| 5 | GPB4 | bidirectional | Port B bit 4. Bidirectional I/O with optional interrupt-on-change and internal weak pull-up. |+| 6 | GPB5 | bidirectional | Port B bit 5. Bidirectional I/O with optional interrupt-on-change and internal weak pull-up. |+| 7 | GPB6 | bidirectional | Port B bit 6. Bidirectional I/O with optional interrupt-on-change and internal weak pull-up. |+| 8 | GPB7 | bidirectional | Port B bit 7. Bidirectional I/O with optional interrupt-on-change and internal weak pull-up. On MCP23017 this pin can also be forced to output-only via configuration. |+| 9 | VDD | power_in | Positive supply. Operating range 1.8V-5.5V (@ -40 to +85 C); 2.7V-5.5V (@ -40 to +85 C) and 4.5V-5.5V (@ -40 to +125 C) for higher speed grades. Max 125 mA into VDD. |+| 10 | VSS | power_in | Device ground reference. Also the tie point for the exposed pad on QFN. |+| 11 | NC | unconnected | No connect on MCP23017 (this pin functions as /CS Chip Select on the MCP23S17 SPI variant). Leave floating or tie to VSS. |+| 12 | SCL | input | I2C serial clock input. Schmitt-trigger input with VIL <= 0.2*VDD and VIH >= 0.8*VDD. Requires external pull-up. Supports 100 kHz / 400 kHz / 1.7 MHz modes. Datasheet Table 2-1 labels this pin 'SCK' since it is shared with the SPI variant. |+| 13 | SDA | bidirectional | I2C serial data. Open-drain bidirectional, Schmitt-trigger input. Requires external pull-up. VOL <= 0.8V @ IOL=3 mA at VDD=4.5V. |+| 14 | NC | unconnected | No connect on MCP23017 (this pin functions as SO Serial Data Out on the MCP23S17 SPI variant). Leave floating. |+| 15 | A0 | input | Hardware I2C slave-address bit 0. TTL-buffer input; must be externally biased to VDD or VSS (do not float). Combines with A1/A2 to select 1 of 8 device addresses on the shared bus. |+| 16 | A1 | input | Hardware I2C slave-address bit 1. TTL-buffer input; must be externally biased. |+| 17 | A2 | input | Hardware I2C slave-address bit 2. TTL-buffer input; must be externally biased. |+| 18 | RESET | input | Active-low hardware reset input. Schmitt-trigger; must be externally biased (typically tied to VDD through a pull-up if unused). Minimum low pulse width TRSTL = 1 us. |+| 19 | INTB | output | Interrupt output for Port B. Configurable via IOCON as active-high, active-low, or open-drain. Can be OR'd with INTA to a single line via IOCON.MIRROR. VOL <= 0.6V @ IOL=1.6 mA. |+| 20 | INTA | output | Interrupt output for Port A. Configurable via IOCON as active-high, active-low, or open-drain. Can be OR'd with INTB via IOCON.MIRROR. |+| 21 | GPA0 | bidirectional | Port A bit 0. Bidirectional I/O with optional interrupt-on-change and internal weak pull-up. Default is input after POR/RESET. |+| 22 | GPA1 | bidirectional | Port A bit 1. Bidirectional I/O with optional interrupt-on-change and internal weak pull-up. |+| 23 | GPA2 | bidirectional | Port A bit 2. Bidirectional I/O with optional interrupt-on-change and internal weak pull-up. |+| 24 | GPA3 | bidirectional | Port A bit 3. Bidirectional I/O with optional interrupt-on-change and internal weak pull-up. |+| 25 | GPA4 | bidirectional | Port A bit 4. Bidirectional I/O with optional interrupt-on-change and internal weak pull-up. |+| 26 | GPA5 | bidirectional | Port A bit 5. Bidirectional I/O with optional interrupt-on-change and internal weak pull-up. |+| 27 | GPA6 | bidirectional | Port A bit 6. Bidirectional I/O with optional interrupt-on-change and internal weak pull-up. |+| 28 | GPA7 | bidirectional | Port A bit 7. Bidirectional I/O with optional interrupt-on-change and internal weak pull-up. Can be forced to output-only on MCP23017. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | SSOP-28 |+| Category | Interface |+| Pins | 28 |++## Ordering variants++Same part, different packaging or reel option.++- `MCP23017T-ESO`+- `MCP23017T-EE/SO`+- `MCP23017T-ESP`+- `MCP23017T-EE/SP`+- `MCP23017T-ESS`+- `MCP23017T-EE/SS`+- `MCP23017T-EML`+- `MCP23017T-EE/ML`++## CAD (KiCad official)++- Symbol: `MCP23017T-E`+- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`+- 3D model: SSOP-28 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590170333350703104) (40 pp, sha256 `63cb5f2bec44434c`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mcp23017t-e-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "mcp23017t-e",+  "version": "0.1.0",+  "type": "component",+  "description": "Microchip Tech I/O Expanders, SSOP-28. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "mcp23017t-e"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "mcp23017t-e.kicad_sym",+    "mcp23017t-e.kicad_mod",+    "mcp23017t-e.glb",+    "mcp23017t-e.step",+    "mcp23017t-e.lbr",+    "docs/hero.png",+    "docs/mcp23017t-e-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file