← Commit history

Initial commit: component/mcp23008t-e

Ray ·085e26e3d9 ·
2 files changed +278
README.mdadded+57
@@ -0,0 +1,57 @@+# MCP23008T-E++**Microchip Tech** · I/O Expanders · UQFN-20-EP(4x4)++MCP23008T-E from Microchip Tech, in a UQFN-20-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | A2 | input | Hardware address input; A2 must be biased externally. |+| 2 | A1 | input | Hardware address input; must be biased externally. |+| 3 | A0 | input | Hardware address input; must be biased externally. |+| 4 | RESET | input | External Reset input; must be biased externally. |+| 5 | NC | unconnected | No connect. |+| 6 | N/C | unconnected | No connect. |+| 7 | INT | output | Interrupt output; can be configured for active-high, active-low or open-drain. |+| 8 | N/C | unconnected | No connect. |+| 9 | GP0 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 10 | GP1 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 11 | GP2 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 12 | GP3 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 13 | GP4 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 14 | GP5 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 15 | GP6 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 16 | GP7 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 17 | VSS | power_in | Ground. |+| 18 | VDD | power_in | Power. |+| 19 | SCL | input | Serial clock input. |+| 20 | SDA | bidirectional | Serial data I/O. |+| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | UQFN-20-EP(4x4) |+| Category | Interface |+| Pins | 21 |++## CAD (KiCad official)++- Symbol: `MCP23008T-E`+- Footprint: `Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm`+- 3D model: UQFN-20-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `mcp23008t-e-etched.step` / `mcp23008t-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp23008t-e.step` / `mcp23008t-e.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590218909828739072) (43 pp, sha256 `3516fba5df6da78c`, retrieved 2026-09-21, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mcp23008t-e-datasheet.pdf)
page.jsonadded+221
@@ -0,0 +1,221 @@+{+  "slug": "mcp23008t-e",+  "version": "0.1.0",+  "type": "component",+  "description": "Microchip Tech I/O Expanders, UQFN-20-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "mcp23008t-e",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "mcp23008t-e.kicad_sym",+    "mcp23008t-e.kicad_mod",+    "mcp23008t-e.glb",+    "mcp23008t-e.step",+    "mcp23008t-e.lbr",+    "docs/hero.png",+    "docs/mcp23008t-e-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "MCP23008T-E",+    "manufacturer": "Microchip Tech",+    "package": "UQFN-20-EP(4x4)",+    "pin_count": 21,+    "category": "Interface",+    "subcategory": "I/O Expanders",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590218909828739072",+    "parts": {+      "symbol": "mcp23008t-e.kicad_sym",+      "footprint": "mcp23008t-e.kicad_mod",+      "model_3d": "mcp23008t-e-etched.glb",+      "model_3d_plain": "mcp23008t-e.glb",+      "model_3d_step": "mcp23008t-e-etched.step",+      "model_3d_step_plain": "mcp23008t-e.step",+      "lbr": "mcp23008t-e.lbr"+    },+    "distributor_links": {+      "lcsc": "C623183"+    },+    "pins": [+      {+        "number": "1",+        "name": "A2",+        "type": "input",+        "description": "Hardware address input; A2 must be biased externally."+      },+      {+        "number": "2",+        "name": "A1",+        "type": "input",+        "description": "Hardware address input; must be biased externally."+      },+      {+        "number": "3",+        "name": "A0",+        "type": "input",+        "description": "Hardware address input; must be biased externally."+      },+      {+        "number": "4",+        "name": "RESET",+        "type": "input",+        "description": "External Reset input; must be biased externally."+      },+      {+        "number": "5",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect."+      },+      {+        "number": "6",+        "name": "N/C",+        "type": "unconnected",+        "description": "No connect."+      },+      {+        "number": "7",+        "name": "INT",+        "type": "output",+        "description": "Interrupt output; can be configured for active-high, active-low or open-drain."+      },+      {+        "number": "8",+        "name": "N/C",+        "type": "unconnected",+        "description": "No connect."+      },+      {+        "number": "9",+        "name": "GP0",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "10",+        "name": "GP1",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "11",+        "name": "GP2",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "12",+        "name": "GP3",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "13",+        "name": "GP4",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "14",+        "name": "GP5",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "15",+        "name": "GP6",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "16",+        "name": "GP7",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "17",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground."+      },+      {+        "number": "18",+        "name": "VDD",+        "type": "power_in",+        "description": "Power."+      },+      {+        "number": "19",+        "name": "SCL",+        "type": "input",+        "description": "Serial clock input."+      },+      {+        "number": "20",+        "name": "SDA",+        "type": "bidirectional",+        "description": "Serial data I/O."+      },+      {+        "number": "21",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 21 added from the footprint"+        ],+        "pages_sent": 43,+        "cost_usd": 0.483,+        "at": "2026-09-21T23:42:34"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590218909828739072",+        "pages": 43,+        "sha256": "3516fba5df6da78c",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 21,+        "described": 21,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file