MCP2221A USB Bridge

@@ -1,8 +1,11 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "mcp2221a",+  "title": "MCP2221A USB Bridge",+  "brief": "USB-2.0 to UART and I2C bridge with GPIO, ADC, and DAC, appears as a CDC + HID composite device.",   "version": "0.1.0",-  "type": "component",-  "description": "USB-2.0 to UART and I2C bridge with GPIO, ADC, and DAC, appears as a CDC + HID composite device.",+  "license": "CC-BY-SA-4.0",   "tags": [     "usb",     "uart",@@ -12,6 +15,157 @@     "microchip",     "soic-14"   ],+  "component": {+    "mpn": "MCP2221A",+    "manufacturer": "Microchip",+    "package": "SOIC-14",+    "pin_count": 14,+    "category": "Interface",+    "subcategory": "USB Bridge",+    "datasheet": "https://ww1.microchip.com/downloads/en/DeviceDoc/MCP2221A-Data-Sheet-DS20005565D.pdf",+    "parts": {+      "symbol": "mcp2221a.kicad_sym",+      "footprint": "mcp2221a.kicad_mod",+      "model_3d": "mcp2221a.glb"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive supply input, 3.0V to 5.5V operating range. Decouple with a local ceramic capacitor."+      },+      {+        "number": "2",+        "name": "GP0",+        "type": "bidirectional",+        "description": "General purpose I/O. Alternate functions: SSPND (OUT) signals USB Suspend state; LED_URx (OUT, factory default) indicates UART Rx activity."+      },+      {+        "number": "3",+        "name": "GP1",+        "type": "bidirectional",+        "description": "General purpose I/O. Alternate functions: CLKR clock reference output (12 MHz or configurable divide), ADC1 input, LED_UTx (factory default) UART Tx activity indicator, and IOC external interrupt edge detector."+      },+      {+        "number": "4",+        "name": "RST",+        "type": "input",+        "description": "Active-low reset input with internal pull-up. Drive low to reset the device."+      },+      {+        "number": "5",+        "name": "URx",+        "type": "input",+        "description": "UART receive data input. Accepts data from the external UART peer to be forwarded to the USB CDC interface."+      },+      {+        "number": "6",+        "name": "UTx",+        "type": "output",+        "description": "UART transmit data output. Drives data received over the USB CDC interface to the external UART peer."+      },+      {+        "number": "7",+        "name": "GP2",+        "type": "bidirectional",+        "description": "General purpose I/O. Alternate functions: USBCFG (OUT, factory default) indicates USB enumeration complete; ADC2 analog input; DAC1 analog output."+      },+      {+        "number": "8",+        "name": "GP3",+        "type": "bidirectional",+        "description": "General purpose I/O. Alternate functions: LED_I2C (OUT, factory default) USB/I2C traffic indicator; ADC3 analog input; DAC2 analog output."+      },+      {+        "number": "9",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I2C serial data line (open-drain). Requires external pull-up. MCP2221A operates as I2C host up to 400 kHz."+      },+      {+        "number": "10",+        "name": "SCL",+        "type": "bidirectional",+        "description": "I2C serial clock line (open-drain). Requires external pull-up. Driven by the MCP2221A as I2C host, up to 400 kHz."+      },+      {+        "number": "11",+        "name": "VUSB",+        "type": "power_out",+        "description": "USB internal 3.3V regulator output. Must be locally bypassed with a high-quality ceramic capacitor. Do not use to power external loads."+      },+      {+        "number": "12",+        "name": "D-",+        "type": "bidirectional",+        "description": "USB differential data line, negative. Connect to the D- line of the USB connector. Termination is integrated."+      },+      {+        "number": "13",+        "name": "D+",+        "type": "bidirectional",+        "description": "USB differential data line, positive. Connect to the D+ line of the USB connector. Termination is integrated."+      },+      {+        "number": "14",+        "name": "VSS",+        "type": "power_in",+        "description": "Device ground reference."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/MCP2221A-Data-Sheet-DS20005565D.pdf",+        "pages": 78,+        "sha256": "ade28a45a0314e2f",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 14,+        "described": 14,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Type": "USB-to-UART + USB-to-I2C bridge",+      "USB": "Full-speed USB 2.0 (12 Mb/s), CDC + HID composite",+      "UART": "Up to 460.8 kbaud",+      "I2C": "Master, up to 400 kHz",+      "GPIO": "4 pins with ADC (10-bit) and DAC (5-bit) functions",+      "Supply voltage": "3.0 V to 5.5 V",+      "Operating temperature": "-40 C to 85 C"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "USB to UART",+    "USB to I2C",+    "USB serial bridge",+    "add USB to a project",+    "USB GPIO"+  ],+  "discovery_pitch": "Add USB to a design and get a UART, an I2C master, and a few GPIO/ADC/DAC pins, no custom driver needed.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -27,10 +181,5 @@     "docs/mcp2221a-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file