component
MCP1703AT-3302E
Public Made by Adomby adom
Microchip Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23A-3. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -32,19 +32,19 @@ "number": "1", "name": "GND", "type": "power_in",- "description": "Regulator ground. Tie GND to the negative side of the output and negative side of the input capacitor. Only the LDO bias current (~2.0 \u00b5A typical) flows through this pin; output regulation is referenced here, so minimize voltage drops between this pin and the load return."+ "description": "Regulator ground. Tie GND to the negative side of the output and negative side of the input capacitor. Only the LDO bias current (~2.0 µA typical) flows through this pin; output regulation is referenced here, so minimize voltage drops between this pin and the load return." }, { "number": "2", "name": "VOUT", "type": "power_out",- "description": "Regulated 3.3 V output. Connect to the positive side of the load and the positive terminal of the output capacitor (1 \u00b5F to 22 \u00b5F ceramic recommended). Delivers up to 250 mA continuous with 625 mV typical dropout at 250 mA (VR = 2.8 V)."+ "description": "Regulated 3.3 V output. Connect to the positive side of the load and the positive terminal of the output capacitor (1 µF to 22 µF ceramic recommended). Delivers up to 250 mA continuous with 625 mV typical dropout at 250 mA (VR = 2.8 V)." }, { "number": "3", "name": "VIN", "type": "power_in",- "description": "Unregulated supply input, 2.7 V to 16.0 V operating range (18 V absolute maximum). Low source impedance is required for stability; a 1 \u00b5F ceramic input capacitor located close to the pin ensures stable LDO operation. Ceramic, tantalum, or aluminum electrolytic types are acceptable."+ "description": "Unregulated supply input, 2.7 V to 16.0 V operating range (18 V absolute maximum). Low source impedance is required for stability; a 1 µF ceramic input capacitor located close to the pin ensures stable LDO operation. Ceramic, tantalum, or aluminum electrolytic types are acceptable." } ], "provenance": {@@ -108,5 +108,8 @@ "docs/mcp1703at-3302e-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }