← Commit history
README.md+20−29@@ -8,9 +8,9 @@ MCP1700T-2802E from MSKSEMI, in a SOT-23. Pinout and pin descriptions extracted | Pin | Name | Type | Function | |---|---|---|---|-| 1 | GND | power_in | Ground pin; input and output capacitor ground connections must be returned to this pin using short, wide traces. |-| 2 | VOUT | power_out | Regulated output pin rated for up to 300mA; for the 2.8V variant the output is 2.8V, and a 1uF to 22uF output capacitor with ESR above 1mΩ should be placed close to VOUT and GND. |-| 3 | VIN | power_in | Supply input pin with an operating range of 1.2V to 5.5V; a 1uF or larger input capacitor should be placed close to VIN and GND. |+| 1 | GND | power_in | Ground pin; input and output capacitor ground connections should be returned directly to this pin using short, wide traces. |+| 2 | VOUT | power_out | Regulated voltage output that supplies up to 300mA; the datasheet recommends an output capacitor of 1uF to 22uF with ESR above 1mΩ placed close to the VOUT and GND pins. |+| 3 | VIN | power_in | Power input pin with a specified input voltage range of 1.2V to 5.5V; a 1uF or larger input capacitor should be placed close to the VIN and GND pins. | ## Key specifications @@ -27,36 +27,27 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Input voltage | VIN | 1.2 | | 5.5 | V | | 7 | | Output voltage accuracy | | -2 | | 2 | % | ILOAD = 0.1mA | 7 |+| Input voltage | VIN | 1.2 | | 5.5 | V | | 7 |+| Current limit | ILIM | 301 | 600 | | mA | VOUT = 0V | 7 | | Shutdown current | ISD | | 0.1 | 0.5 | μA | VEN = 0V, VOUT = 0V | 7 |-| EN input current | IEN | | 10 | 100 | nA | VEN = 5V | 7 |-| Output current limit | ILIM | 301 | 600 | | mA | VOUT = 0V | 7 |-| VIN to GND (absolute maximum) | | -0.3 | | 7 | V | | 6 |-| VOUT, EN to GND (absolute maximum) | | -0.3 | | 6 | V | | 6 |-| VOUT to VIN (absolute maximum) | | -6 | | 0.3 | V | | 6 |-| Storage temperature range | | -60 | | 150 | °C | | 6 |-| Junction temperature | | | | 150 | °C | | 6 |-| Pin soldering temperature | | | | 260 | °C | Soldering, 10 sec. | 6 |-| ESD HBM | | | | 2 | KV | Human body model | 6 |-| ESD MM | | | | 200 | V | Machine model | 6 |-| ESD CDM | | | | 2 | KV | Charged device model | 6 |-| Input voltage VIN (recommended) | VIN | 1.2 | | 5.5 | V | | 6 |-| Operating junction temperature range | | -40 | | 125 | °C | | 6 |-| Operating ambient temperature range | | -40 | | 85 | °C | | 6 |-| Output load current range | ILOAD | 0 | | 300 | mA | Stable operation over full range | 2 |-| Load regulation | ΔLOAD | | 0.2 | | % | 10mA ≤ ILOAD ≤ 0.3A | 7 |-| Input voltage regulation | ΔLINE | | 0.2 | | % | ILOAD = 30mA, 1.5V ≤ VIN ≤ 5.5V or (VOUT + 0.2V) ≤ VIN ≤ 5.5V | 7 |-| Dropout voltage (2.8V) | VDROP_2.8V | | 0.23 | | V | ILOAD = 300mA, VOUT = 2.8V | 7 |-| Quiescent current | IQ | | 2 | | μA | ILOAD = 0mA | 7 |-| SNS input current | ISNS | | 0.5 | | μA | SNS = VOUT | 7 |-| EN threshold voltage high (rising) | VIH | | 1 | | V | EN rising | 7 |-| EN threshold voltage low (falling) | VIL | | 0.4 | | V | EN falling | 7 |-| Output noise (2.8V) | | | 120 | | μVRMS | BW = 10Hz to 100kHz, COUT = 1μF, VIN = 3.5V, ILOAD = 0.1A, VOUT = 2.8V | 7 |-| Over-temperature shutdown threshold | TSD | | 155 | | °C | ILOAD = 10mA | 7 |+| Output current noise | | | 120 | | μVRMS | BW = 10Hz to 100kHz, COUT = 1μF, VIN = 3.5V, ILOAD = 0.1A, VOUT = 2.8V | 7 |+| Over-temperature shutdown temperature | TSD | | 155 | | °C | ILOAD = 10mA | 7 | | Over-temperature shutdown hysteresis | ΔTSD | | 15 | | °C | | 7 | | Discharge resistance | RDC | | 30 | | Ω | EN = 0V, VOUT = 0.1V | 7 |+| Input voltage (absolute maximum, VIN to GND) | VIN | -0.3 | | 7 | V | to GND | 6 |+| VOUT, EN to GND | VOUT, EN | -0.3 | | 6 | V | to GND | 6 |+| VOUT to VIN | VOUT-VIN | -6 | | 0.3 | V | | 6 |+| Pin soldering temperature | | | | 260 | °C | Soldering, 10 sec. | 6 |+| Junction temperature | | | | 150 | °C | | 6 |+| Storage temperature range | | -60 | | 150 | °C | | 6 |+| ESD HBM | | | | 2 | KV | HBM | 6 |+| ESD MM | | | | 200 | V | MM | 6 |+| ESD CDM | | | | 2 | KV | CDM | 6 | | Thermal resistance junction-to-ambient | θJA | | 250 | | °C/W | TA = 25°C, EVB board | 6 |+| Input voltage (recommended operating) | VIN | 1.2 | | 5.5 | V | | 6 |+| Application junction temperature range | | -40 | | 125 | °C | | 6 |+| Application ambient temperature range | | -40 | | 85 | °C | | 6 | ## CAD (KiCad official) @@ -69,7 +60,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [MSKSEMI datasheet](docs/mcp1700t-2802e-tt-datasheet.pdf) (13 pp, sha256 `5eab501db03ec28d`, retrieved 2026-11-12, tier: lcsc)+- **Datasheet:** [MSKSEMI datasheet](docs/mcp1700t-2802e-tt-datasheet.pdf) (13 pp, sha256 `5eab501db03ec28d`, retrieved 2026-11-17, tier: lcsc) - **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original. - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
package.json+11−11@@ -1,6 +1,6 @@ { "slug": "mcp1700t-2802e-tt",- "version": "0.1.1",+ "version": "0.1.2", "type": "component", "description": "MSKSEMI Linear Voltage Regulators (LDO), SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -51,7 +51,7 @@ "lcsc": "C20627190" }, "distributor_check": {- "checked_at": "2026-11-12T22:45:54Z",+ "checked_at": "2026-11-17T16:14:46Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": null,@@ -67,19 +67,19 @@ "number": "1", "name": "GND", "type": "power_in",- "description": "Ground pin; input and output capacitor ground connections must be returned to this pin using short, wide traces."+ "description": "Ground pin; input and output capacitor ground connections should be returned directly to this pin using short, wide traces." }, { "number": "2", "name": "VOUT", "type": "power_out",- "description": "Regulated output pin rated for up to 300mA; for the 2.8V variant the output is 2.8V, and a 1uF to 22uF output capacitor with ESR above 1mΩ should be placed close to VOUT and GND."+ "description": "Regulated voltage output that supplies up to 300mA; the datasheet recommends an output capacitor of 1uF to 22uF with ESR above 1mΩ placed close to the VOUT and GND pins." }, { "number": "3", "name": "VIN", "type": "power_in",- "description": "Supply input pin with an operating range of 1.2V to 5.5V; a 1uF or larger input capacitor should be placed close to VIN and GND."+ "description": "Power input pin with a specified input voltage range of 1.2V to 5.5V; a 1uF or larger input capacitor should be placed close to the VIN and GND pins." } ], "provenance": {@@ -93,11 +93,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The SOT-23 pin assignments come from the pin function table on page 2 (1 GND, 2 VOUT, 3 VIN). The pi; Page 2 says an EN-enabled version of the family is available, but the SOT-23 pin table lists only th"+ "extractor flagged: The SOT-23 pin configuration drawing on page 2 is not present as text; pin numbers and names are tak; The datasheet states that an EN (enable) version is optional, and EN and SNS pins appear in the appl; Pin descriptions for VIN and VOUT draw on the recommended-conditions, application and features text " ], "pages_sent": 13,- "cost_usd": 0.0354,- "at": "2026-11-12T22:45:47"+ "cost_usd": 0.0367,+ "at": "2026-11-17T16:14:39" }, "datasheet": { "url": "https://datasheet.lcsc.com/datasheet/pdf/5b5f5e57162218e13687e5eb16f402be.pdf",@@ -134,7 +134,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "dd5d1711204e1d8d26cd11490923bd84340820baa69538c385a4300ec2539bc0",- "checked": "2026-11-12",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -152,8 +152,8 @@ "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "ac56f063c07f4648dbc90996c9e58e13890c7684c26e900ff23509b91e1a17c7",- "checked": "2026-11-12",+ "sha256": "fd4e26c1d36f857ad7445d3765b271296245a3ba9222d6d1d3d6c73456e8c2a6",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],
page.json+14−12@@ -4,7 +4,7 @@ "slug": "mcp1700t-2802e-tt", "title": "MCP1700T-2802E/TT", "brief": "MSKSEMI Linear Voltage Regulators (LDO), SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.1",+ "version": "0.1.2", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -34,7 +34,7 @@ "lcsc": "C20627190" }, "distributor_check": {- "checked_at": "2026-11-12T22:45:54Z",+ "checked_at": "2026-11-17T16:14:46Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": null,@@ -50,19 +50,19 @@ "number": "1", "name": "GND", "type": "power_in",- "description": "Ground pin; input and output capacitor ground connections must be returned to this pin using short, wide traces."+ "description": "Ground pin; input and output capacitor ground connections should be returned directly to this pin using short, wide traces." }, { "number": "2", "name": "VOUT", "type": "power_out",- "description": "Regulated output pin rated for up to 300mA; for the 2.8V variant the output is 2.8V, and a 1uF to 22uF output capacitor with ESR above 1mΩ should be placed close to VOUT and GND."+ "description": "Regulated voltage output that supplies up to 300mA; the datasheet recommends an output capacitor of 1uF to 22uF with ESR above 1mΩ placed close to the VOUT and GND pins." }, { "number": "3", "name": "VIN", "type": "power_in",- "description": "Supply input pin with an operating range of 1.2V to 5.5V; a 1uF or larger input capacitor should be placed close to VIN and GND."+ "description": "Power input pin with a specified input voltage range of 1.2V to 5.5V; a 1uF or larger input capacitor should be placed close to the VIN and GND pins." } ], "provenance": {@@ -76,11 +76,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The SOT-23 pin assignments come from the pin function table on page 2 (1 GND, 2 VOUT, 3 VIN). The pi; Page 2 says an EN-enabled version of the family is available, but the SOT-23 pin table lists only th"+ "extractor flagged: The SOT-23 pin configuration drawing on page 2 is not present as text; pin numbers and names are tak; The datasheet states that an EN (enable) version is optional, and EN and SNS pins appear in the appl; Pin descriptions for VIN and VOUT draw on the recommended-conditions, application and features text " ], "pages_sent": 13,- "cost_usd": 0.0354,- "at": "2026-11-12T22:45:47"+ "cost_usd": 0.0367,+ "at": "2026-11-17T16:14:39" }, "datasheet": { "url": "https://datasheet.lcsc.com/datasheet/pdf/5b5f5e57162218e13687e5eb16f402be.pdf",@@ -117,7 +117,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "dd5d1711204e1d8d26cd11490923bd84340820baa69538c385a4300ec2539bc0",- "checked": "2026-11-12",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -135,8 +135,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "ac56f063c07f4648dbc90996c9e58e13890c7684c26e900ff23509b91e1a17c7",- "checked": "2026-11-12",+ "sha256": "fd4e26c1d36f857ad7445d3765b271296245a3ba9222d6d1d3d6c73456e8c2a6",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -602,5 +602,7 @@ ], "visibility": { "public": true- }+ },+ "description": "MSKSEMI Linear Voltage Regulators (LDO), SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }