component
MCP1700-3002E
Public Made by Adomby adom
Microchip Tech , TO-92-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+1592
README.md+69docs/hero.pngdocs/mcp1700-3002e-datasheet.pdfmcp1700-3002e-etched.glbmcp1700-3002e-hero.glbmcp1700-3002e-hero.overlay.json+155mcp1700-3002e.glbmcp1700-3002e.kicad_mod+175mcp1700-3002e.kicad_sym+25mcp1700-3002e.lbr+147mcp1700-3002e.step+689package.json+162page.json+168viewers/footprint.html+1viewers/symbol.html+1README.mdadded+69@@ -0,0 +1,69 @@+# MCP1700-3002E++**Microchip Tech** · IC · TO-92-3++MCP1700-3002E from Microchip Tech, in a TO-92-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Regulator ground; tie to the negative side of the output and input capacitors, only the 1.6 µA typical LDO bias current flows out of this pin and output regulation is referenced to it. |+| 2 | VIN | power_in | Unregulated supply voltage input (2.3V to 6.0V operating range); connect to the input source with about 1 µF of capacitance for stable operation. |+| 3 | VOUT | power_out | Regulated voltage output; connect to the positive side of the load and output capacitor, and the current flowing out equals the DC load current (up to 250 mA for VOUT ≥ 2.5V). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | TO-92-3 |+| Category | |+| Pins | 3 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Input Operating Voltage | VIN | 2.3 | | 6 | V | Note 1 | 3 |+| Input Quiescent Current | Iq | | 1.6 | 4 | µA | IL = 0 mA, VIN = VR +1V | 3 |+| Maximum Output Current | IOUT_mA | 250 | | | mA | For VR ≥ 2.5V | 3 |+| Output Voltage Regulation (over TJ) | VOUT | -3 | | 3 | % | Note 2; VR-3.0% to VR+3.0% (boldface, TJ -40°C to +125°C) | 3 |+| Output Voltage Regulation (25°C) | VOUT | -2 | 0.4 | 2 | % | Note 2; VR-2.0% to VR+2.0%, typ VR±0.4 | 3 |+| Line Regulation | ΔVOUT/(VOUT×ΔVIN) | -1 | 0.75 | 1 | %/V | (VR+1)V ≤ VIN ≤ 6V; typ ±0.75 | 3 |+| Load Regulation | ΔVOUT/VOUT | -1.5 | 1 | 1.5 | % | IL = 0.1 mA to 250 mA for VR ≥ 2.5V, Note 4; typ ±1.0 | 3 |+| Dropout Voltage VR > 2.5V | VIN-VOUT | | 178 | 350 | mV | IL = 250 mA, (Note 1, Note 5) | 3 |+| Specified Temperature Range | TA | -40 | | 125 | °C | | 4 |+| Operating Temperature Range | TA | -40 | | 125 | °C | | 4 |+| Storage Temperature Range | TA | -65 | | 150 | °C | | 4 |+| Maximum Supply Voltage | VDD | | | 6.5 | V | | 3 |+| Maximum Junction Temperature | TJ | | | 150 | °C | | 3 |+| Operating Junction Temperature | TJ | -40 | | 125 | °C | | 3 |+| Input/Output pin voltage | | -0.3 | | 0.3 | V | All inputs and outputs w.r.t. (VSS-0.3V) to (VIN+0.3V) | 3 |+| ESD protection HBM | | 4 | | | kV | ≥ 4 kV, all pins | 3 |+| ESD protection MM | | 400 | | | V | ≥ 400V, all pins | 3 |+| Thermal Resistance, TO-92 | θJA | | 131.9 | | °C/W | EIA/JEDEC JESD51-751-7 4-Layer Board | 4 |+| Output Short Circuit Current | IOUT_SC | | 408 | | mA | VIN = VR + V, VOUT = GND, peak current measured 10 ms after short is applied | 3 |+| VOUT Temperature Coefficient | TCVOUT | | 50 | | ppm/°C | Note 3 | 3 |+| Output Rise Time | TR | | 500 | | µs | 10% VR to 90% VR VIN = 0V to 6V, RL = 50Ω resistive | 3 |+| Output Noise | eN | | 3 | | µV/(Hz)1/2 | IL = 100 mA, f = 1 kHz, COUT = 1 µF | 3 |+| Thermal Shutdown Protection | TSD | | 140 | | °C | VIN = VR + 1, IL = 100 µA | 4 |++## CAD (KiCad official)++- Symbol: `MCP1700-3002E`+- Footprint: `Package_TO_SOT_THT:TO-92_Inline`+- 3D model: TO-92-3 (KiCad packages3D, STEP)+- 3D model files: `mcp1700-3002e-etched.step` / `mcp1700-3002e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp1700-3002e.step` / `mcp1700-3002e.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](https://www.waldom.com/productfiles/mf-mip/21826b.pdf) (24 pp, sha256 `8b0857ed5a391656`, retrieved 2026-10-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mcp1700-3002e-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/mcp1700-3002e-datasheet.pdfadded⋯ 1 unchanged line ⋯
mcp1700-3002e-etched.glbadded⋯ 1 unchanged line ⋯
mcp1700-3002e-hero.glbadded⋯ 1 unchanged line ⋯
mcp1700-3002e-hero.overlay.jsonadded+155@@ -0,0 +1,155 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "MCP1700-3002E",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 3,+ "span_mm": 3.59,+ "dash_mm": 0.12,+ "gap_mm": 0.072,+ "pad_stroke_mm": 0.03+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 3,+ "pin1": {+ "source": "added dot (AI)",+ "pad": "1",+ "center_mm": [+ -0.956,+ 0.0+ ],+ "r_mm": 0.231+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 3,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.287,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -0.24,+ 2.78,+ -0.19,+ 0.19+ ],+ "pads_bbox_mm": [+ -0.525,+ 3.065,+ -0.75,+ 0.75+ ],+ "seating_z_mm": -2.5+ },+ "sources": {+ "glb": "mcp1700-3002e-etched.glb",+ "glb_sha256": "91a8c036b7f2edc056ef109befb85534cc0fa83402ffddb7f03c1f2c3e39f934",+ "footprint": "mcp1700-3002e.kicad_mod",+ "footprint_sha256": "3dc20106fe879101fddfa476acd24053911b7d664f2f25e79aa7f1c7c3b32b93",+ "pins": "page.json component.pins",+ "pins_sha256": "0fb04a252c8e9f515de412857dbd8154e14c407875f44f20e3ee57d03321cb3f"+ },+ "generator": "adom-wiki 1.7.80 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "GND",+ "x": -1.337,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "VIN",+ "x": 1.945,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "VOUT",+ "x": 3.215,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 1.05,+ 1.5+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "oval",+ "center_mm": [+ 1.27,+ 0.0+ ],+ "size_mm": [+ 1.05,+ 1.5+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "oval",+ "center_mm": [+ 2.54,+ 0.0+ ],+ "size_mm": [+ 1.05,+ 1.5+ ],+ "rot": 0.0+ }+ ]+}
mcp1700-3002e.glbadded⋯ 1 unchanged line ⋯
mcp1700-3002e.kicad_modadded+175@@ -0,0 +1,175 @@+(footprint "TO-92_Inline"+ (version 20260206)+ (generator "pcbnew")+ (generator_version "10.0")+ (layer "F.Cu")+ (descr "TO-92 leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)")+ (tags "to-92 sc-43 sc-43a sot54 PA33 transistor")+ (property "Reference" "REF**"+ (at 1.27 -3.56 0)+ (layer "F.SilkS")+ (uuid "f8d60c07-fcb4-4333-b1c1-8b3d3f312520")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "TO-92_Inline"+ (at 1.27 2.79 0)+ (layer "F.Fab")+ (uuid "46e152dd-3e84-4692-ab08-8f8d182ac1f0")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Datasheet" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "13a62c66-6828-4621-95e7-083954b37b6f")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (property "Description" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "a81db220-f19f-495f-8fd1-8d52823f6974")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (attr through_hole)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -0.53 1.85)+ (end 3.07 1.85)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "cf5cf09f-aa3b-4d09-93f0-cd60b4888842")+ )+ (fp_arc+ (start -0.568478 1.838478)+ (mid -1.132087 -0.994977)+ (end 1.27 -2.6)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "99142eee-f758-4736-a8c8-cb8594d72329")+ )+ (fp_arc+ (start 1.27 -2.6)+ (mid 3.672087 -0.994977)+ (end 3.108478 1.838478)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "6883339b-fe76-44dd-867c-5e7513ca94d9")+ )+ (fp_line+ (start -0.5 1.75)+ (end 3 1.75)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "5d7416fc-4b8c-4be4-a9fd-ef9b81ac6c9c")+ )+ (fp_arc+ (start -0.483625 1.753625)+ (mid -1.021221 -0.949055)+ (end 1.27 -2.48)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "aa16c43c-65a5-4741-be20-e91b6c83fa25")+ )+ (fp_arc+ (start 1.27 -2.48)+ (mid 3.561221 -0.949055)+ (end 3.023625 1.753625)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "f16cbdf0-79ae-4941-a6bc-5ea567fda1f0")+ )+ (fp_text user "${REFERENCE}"+ (at 1.27 0 0)+ (layer "F.Fab")+ (uuid "77380750-baf8-4990-b61d-2bd2227c89ba")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (pad "1" thru_hole rect+ (at 0 0)+ (size 1.05 1.5)+ (drill 0.75)+ (layers "*.Cu" "*.Mask")+ (remove_unused_layers no)+ (uuid "30d66bfc-1f65-461a-a175-eddb5ee97273")+ )+ (pad "2" thru_hole oval+ (at 1.27 0)+ (size 1.05 1.5)+ (drill 0.75)+ (layers "*.Cu" "*.Mask")+ (remove_unused_layers no)+ (uuid "19a641f3-2188-4ac8-845f-9705044a4d32")+ )+ (pad "3" thru_hole oval+ (at 2.54 0)+ (size 1.05 1.5)+ (drill 0.75)+ (layers "*.Cu" "*.Mask")+ (remove_unused_layers no)+ (uuid "58a02559-fefd-4819-914f-420454f3bf9f")+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_THT.3dshapes/TO-92_Inline.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+ (fp_poly+ (pts (xy -1.28 -2.73) (xy 3.82 -2.73) (xy 3.82 2.01) (xy -1.28 2.01))+ (stroke (width 0.05) (type solid))+ (fill no)+ (layer "F.CrtYd")+ )+)
mcp1700-3002e.kicad_symadded+25@@ -0,0 +1,25 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "MCP1700-3002E" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 5.08 0) (effects (font (size 1.27 1.27))))+ (property "Value" "MCP1700-3002E" (at 0 -7.62 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "MCP1700-3002E_0_1"+ (rectangle (start -12.70 2.54) (end 12.70 -5.08)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "MCP1700-3002E_1_1"+ (pin power_in line (at -17.78 0.00 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -2.54 0) (length 5.08)+ (name "VIN" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin power_out line (at 17.78 0.00 180) (length 5.08)+ (name "VOUT" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
mcp1700-3002e.lbradded+147@@ -0,0 +1,147 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="TO-92_Inline">+ <description>3 pads, 3.6 x 1.5 mm. TO-92 leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)</description>+ <pad name="1" x="0.0000" y="-0.0000" drill="0.7500" diameter="1.0500" shape="long" rot="R90"/>+ <pad name="2" x="1.2700" y="-0.0000" drill="0.7500" diameter="1.0500" shape="long" rot="R90"/>+ <pad name="3" x="2.5400" y="-0.0000" drill="0.7500" diameter="1.0500" shape="long" rot="R90"/>+ <wire x1="-0.5300" y1="-1.8500" x2="3.0700" y2="-1.8500" width="0.1200" layer="21"/>+ <wire x1="-0.5000" y1="-1.7500" x2="3.0000" y2="-1.7500" width="0.1000" layer="51"/>+ <wire x1="-0.5685" y1="-1.8385" x2="-0.8918" y2="-1.4445" width="0.1200" layer="21"/>+ <wire x1="-0.8918" y1="-1.4445" x2="-1.1321" y2="-0.9950" width="0.1200" layer="21"/>+ <wire x1="-1.1321" y1="-0.9950" x2="-1.2800" y2="-0.5072" width="0.1200" layer="21"/>+ <wire x1="-1.2800" y1="-0.5072" x2="-1.3300" y2="-0.0000" width="0.1200" layer="21"/>+ <wire x1="-1.3300" y1="-0.0000" x2="-1.2800" y2="0.5072" width="0.1200" layer="21"/>+ <wire x1="-1.2800" y1="0.5072" x2="-1.1321" y2="0.9950" width="0.1200" layer="21"/>+ <wire x1="-1.1321" y1="0.9950" x2="-0.8918" y2="1.4445" width="0.1200" layer="21"/>+ <wire x1="-0.8918" y1="1.4445" x2="-0.5685" y2="1.8385" width="0.1200" layer="21"/>+ <wire x1="-0.5685" y1="1.8385" x2="-0.1745" y2="2.1618" width="0.1200" layer="21"/>+ <wire x1="-0.1745" y1="2.1618" x2="0.2750" y2="2.4021" width="0.1200" layer="21"/>+ <wire x1="0.2750" y1="2.4021" x2="0.7628" y2="2.5500" width="0.1200" layer="21"/>+ <wire x1="0.7628" y1="2.5500" x2="1.2700" y2="2.6000" width="0.1200" layer="21"/>+ <wire x1="1.2700" y1="2.6000" x2="1.7772" y2="2.5500" width="0.1200" layer="21"/>+ <wire x1="1.7772" y1="2.5500" x2="2.2650" y2="2.4021" width="0.1200" layer="21"/>+ <wire x1="2.2650" y1="2.4021" x2="2.7145" y2="2.1618" width="0.1200" layer="21"/>+ <wire x1="2.7145" y1="2.1618" x2="3.1085" y2="1.8385" width="0.1200" layer="21"/>+ <wire x1="3.1085" y1="1.8385" x2="3.4318" y2="1.4445" width="0.1200" layer="21"/>+ <wire x1="3.4318" y1="1.4445" x2="3.6721" y2="0.9950" width="0.1200" layer="21"/>+ <wire x1="3.6721" y1="0.9950" x2="3.8200" y2="0.5072" width="0.1200" layer="21"/>+ <wire x1="3.8200" y1="0.5072" x2="3.8700" y2="-0.0000" width="0.1200" layer="21"/>+ <wire x1="3.8700" y1="-0.0000" x2="3.8200" y2="-0.5072" width="0.1200" layer="21"/>+ <wire x1="3.8200" y1="-0.5072" x2="3.6721" y2="-0.9950" width="0.1200" layer="21"/>+ <wire x1="3.6721" y1="-0.9950" x2="3.4318" y2="-1.4445" width="0.1200" layer="21"/>+ <wire x1="3.4318" y1="-1.4445" x2="3.1085" y2="-1.8385" width="0.1200" layer="21"/>+ <wire x1="-0.4836" y1="-1.7536" x2="-0.7920" y2="-1.3778" width="0.1000" layer="51"/>+ <wire x1="-0.7920" y1="-1.3778" x2="-1.0212" y2="-0.9491" width="0.1000" layer="51"/>+ <wire x1="-1.0212" y1="-0.9491" x2="-1.1623" y2="-0.4838" width="0.1000" layer="51"/>+ <wire x1="-1.1623" y1="-0.4838" x2="-1.2100" y2="-0.0000" width="0.1000" layer="51"/>+ <wire x1="-1.2100" y1="-0.0000" x2="-1.1623" y2="0.4838" width="0.1000" layer="51"/>+ <wire x1="-1.1623" y1="0.4838" x2="-1.0212" y2="0.9491" width="0.1000" layer="51"/>+ <wire x1="-1.0212" y1="0.9491" x2="-0.7920" y2="1.3778" width="0.1000" layer="51"/>+ <wire x1="-0.7920" y1="1.3778" x2="-0.4836" y2="1.7536" width="0.1000" layer="51"/>+ <wire x1="-0.4836" y1="1.7536" x2="-0.1078" y2="2.0620" width="0.1000" layer="51"/>+ <wire x1="-0.1078" y1="2.0620" x2="0.3209" y2="2.2912" width="0.1000" layer="51"/>+ <wire x1="0.3209" y1="2.2912" x2="0.7862" y2="2.4323" width="0.1000" layer="51"/>+ <wire x1="0.7862" y1="2.4323" x2="1.2700" y2="2.4800" width="0.1000" layer="51"/>+ <wire x1="1.2700" y1="2.4800" x2="1.7538" y2="2.4323" width="0.1000" layer="51"/>+ <wire x1="1.7538" y1="2.4323" x2="2.2191" y2="2.2912" width="0.1000" layer="51"/>+ <wire x1="2.2191" y1="2.2912" x2="2.6478" y2="2.0620" width="0.1000" layer="51"/>+ <wire x1="2.6478" y1="2.0620" x2="3.0236" y2="1.7536" width="0.1000" layer="51"/>+ <wire x1="3.0236" y1="1.7536" x2="3.3320" y2="1.3778" width="0.1000" layer="51"/>+ <wire x1="3.3320" y1="1.3778" x2="3.5612" y2="0.9491" width="0.1000" layer="51"/>+ <wire x1="3.5612" y1="0.9491" x2="3.7023" y2="0.4838" width="0.1000" layer="51"/>+ <wire x1="3.7023" y1="0.4838" x2="3.7500" y2="-0.0000" width="0.1000" layer="51"/>+ <wire x1="3.7500" y1="-0.0000" x2="3.7023" y2="-0.4838" width="0.1000" layer="51"/>+ <wire x1="3.7023" y1="-0.4838" x2="3.5612" y2="-0.9491" width="0.1000" layer="51"/>+ <wire x1="3.5612" y1="-0.9491" x2="3.3320" y2="-1.3778" width="0.1000" layer="51"/>+ <wire x1="3.3320" y1="-1.3778" x2="3.0236" y2="-1.7536" width="0.1000" layer="51"/>+ <text x="0" y="1.350" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-2.450" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="MCP1700-3002E">+ <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>+ <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="2.54" width="0.254" layer="94"/>+ <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="GND" x="-17.78" y="0" length="middle" direction="pwr"/>+ <pin name="VIN" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+ <pin name="VOUT" x="17.78" y="0" length="middle" direction="out" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="MCP1700-3002E" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="MCP1700-3002E" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="TO-92_Inline">+ <connects>+ <connect gate="G$1" pin="GND" pad="1"/>+ <connect gate="G$1" pin="VIN" pad="2"/>+ <connect gate="G$1" pin="VOUT" pad="3"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
mcp1700-3002e.stepadded+689@@ -0,0 +1,689 @@+ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('FreeCAD Model'),'2;1'); +FILE_NAME( +'D:/KiCAD/packages3D-source/Package_TO_SOT_THT.3dshapes\\ +TO-92_Inline_Narrow.step','2017-11-28T22:16:31',('kicad StepUp'),( + 'ksu MCAD'),'Open CASCADE STEP processor 6.8','FreeCAD','Unknown'); +FILE_SCHEMA(('AUTOMOTIVE_DESIGN_CC2 { 1 2 10303 214 -1 1 5 4 }')); +ENDSEC; +DATA; +#1 = APPLICATION_PROTOCOL_DEFINITION('committee draft', + 'automotive_design',1997,#2); +#2 = APPLICATION_CONTEXT( + 'core data for automotive mechanical design processes'); +#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10); +#4 = PRODUCT_DEFINITION_SHAPE('','',#5); +#5 = PRODUCT_DEFINITION('design','',#6,#9); +#6 = PRODUCT_DEFINITION_FORMATION('','',#7); +#7 = PRODUCT('TO-92_Inline_Narrow','TO-92_Inline_Narrow','',(#8)); +#8 = MECHANICAL_CONTEXT('',#2,'mechanical'); +#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#527); +#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); +#12 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000)); +#13 = DIRECTION('',(0.E+000,0.E+000,1.)); +#14 = DIRECTION('',(1.,0.E+000,-0.E+000)); +#15 = MANIFOLD_SOLID_BREP('',#16); +#16 = CLOSED_SHELL('',(#17,#57,#81,#193,#203,#234,#258,#282,#299,#330, + #354,#378,#395,#426,#450,#474,#491,#503,#515)); +#17 = ADVANCED_FACE('',(#18),#52,.F.); +#18 = FACE_BOUND('',#19,.F.); +#19 = EDGE_LOOP('',(#20,#30,#38,#46)); +#20 = ORIENTED_EDGE('',*,*,#21,.T.); +#21 = EDGE_CURVE('',#22,#24,#26,.T.); +#22 = VERTEX_POINT('',#23); +#23 = CARTESIAN_POINT('',(-0.745769083998,-1.33,2.5)); +#24 = VERTEX_POINT('',#25); +#25 = CARTESIAN_POINT('',(-0.745769083998,-1.33,7.3)); +#26 = LINE('',#27,#28); +#27 = CARTESIAN_POINT('',(-0.745769083998,-1.33,2.5)); +#28 = VECTOR('',#29,1.); +#29 = DIRECTION('',(0.E+000,0.E+000,1.)); +#30 = ORIENTED_EDGE('',*,*,#31,.T.); +#31 = EDGE_CURVE('',#24,#32,#34,.T.); +#32 = VERTEX_POINT('',#33); +#33 = CARTESIAN_POINT('',(3.285769083998,-1.33,7.3)); +#34 = LINE('',#35,#36); +#35 = CARTESIAN_POINT('',(-0.745769083998,-1.33,7.3)); +#36 = VECTOR('',#37,1.); +#37 = DIRECTION('',(1.,0.E+000,0.E+000)); +#38 = ORIENTED_EDGE('',*,*,#39,.F.); +#39 = EDGE_CURVE('',#40,#32,#42,.T.); +#40 = VERTEX_POINT('',#41); +#41 = CARTESIAN_POINT('',(3.285769083998,-1.33,2.5)); +#42 = LINE('',#43,#44); +#43 = CARTESIAN_POINT('',(3.285769083998,-1.33,2.5)); +#44 = VECTOR('',#45,1.); +#45 = DIRECTION('',(0.E+000,0.E+000,1.)); +#46 = ORIENTED_EDGE('',*,*,#47,.F.); +#47 = EDGE_CURVE('',#22,#40,#48,.T.); +#48 = LINE('',#49,#50); +#49 = CARTESIAN_POINT('',(-0.745769083998,-1.33,2.5)); +#50 = VECTOR('',#51,1.); +#51 = DIRECTION('',(1.,0.E+000,0.E+000)); +#52 = PLANE('',#53); +#53 = AXIS2_PLACEMENT_3D('',#54,#55,#56); +#54 = CARTESIAN_POINT('',(-0.745769083998,-1.33,2.5)); +#55 = DIRECTION('',(0.E+000,1.,0.E+000)); +#56 = DIRECTION('',(1.,0.E+000,0.E+000)); +#57 = ADVANCED_FACE('',(#58),#76,.T.); +#58 = FACE_BOUND('',#59,.F.); +#59 = EDGE_LOOP('',(#60,#61,#68,#69)); +#60 = ORIENTED_EDGE('',*,*,#39,.T.); +#61 = ORIENTED_EDGE('',*,*,#62,.T.); +#62 = EDGE_CURVE('',#32,#24,#63,.T.); +#63 = CIRCLE('',#64,2.415); +#64 = AXIS2_PLACEMENT_3D('',#65,#66,#67); +#65 = CARTESIAN_POINT('',(1.27,0.E+000,7.3)); +#66 = DIRECTION('',(0.E+000,0.E+000,1.)); +#67 = DIRECTION('',(1.,0.E+000,0.E+000)); +#68 = ORIENTED_EDGE('',*,*,#21,.F.); +#69 = ORIENTED_EDGE('',*,*,#70,.F.); +#70 = EDGE_CURVE('',#40,#22,#71,.T.); +#71 = CIRCLE('',#72,2.415); +#72 = AXIS2_PLACEMENT_3D('',#73,#74,#75); +#73 = CARTESIAN_POINT('',(1.27,0.E+000,2.5)); +#74 = DIRECTION('',(0.E+000,0.E+000,1.)); +#75 = DIRECTION('',(1.,0.E+000,0.E+000)); +#76 = CYLINDRICAL_SURFACE('',#77,2.415); +#77 = AXIS2_PLACEMENT_3D('',#78,#79,#80); +#78 = CARTESIAN_POINT('',(1.27,0.E+000,2.5)); +#79 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#80 = DIRECTION('',(1.,0.E+000,0.E+000)); +#81 = ADVANCED_FACE('',(#82,#86,#120,#154),#188,.T.); +#82 = FACE_BOUND('',#83,.T.); +#83 = EDGE_LOOP('',(#84,#85)); +#84 = ORIENTED_EDGE('',*,*,#47,.F.); +#85 = ORIENTED_EDGE('',*,*,#70,.F.); +#86 = FACE_BOUND('',#87,.T.); +#87 = EDGE_LOOP('',(#88,#98,#106,#114)); +#88 = ORIENTED_EDGE('',*,*,#89,.F.); +#89 = EDGE_CURVE('',#90,#92,#94,.T.); +#90 = VERTEX_POINT('',#91); +#91 = CARTESIAN_POINT('',(1.51,-0.19,2.5)); +#92 = VERTEX_POINT('',#93); +#93 = CARTESIAN_POINT('',(1.03,-0.19,2.5)); +#94 = LINE('',#95,#96); +#95 = CARTESIAN_POINT('',(1.51,-0.19,2.5)); +#96 = VECTOR('',#97,1.); +#97 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#98 = ORIENTED_EDGE('',*,*,#99,.F.); +#99 = EDGE_CURVE('',#100,#90,#102,.T.); +#100 = VERTEX_POINT('',#101); +#101 = CARTESIAN_POINT('',(1.51,0.19,2.5)); +#102 = LINE('',#103,#104); +#103 = CARTESIAN_POINT('',(1.51,0.19,2.5)); +#104 = VECTOR('',#105,1.); +#105 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#106 = ORIENTED_EDGE('',*,*,#107,.F.); +#107 = EDGE_CURVE('',#108,#100,#110,.T.); +#108 = VERTEX_POINT('',#109); +#109 = CARTESIAN_POINT('',(1.03,0.19,2.5)); +#110 = LINE('',#111,#112); +#111 = CARTESIAN_POINT('',(1.03,0.19,2.5)); +#112 = VECTOR('',#113,1.); +#113 = DIRECTION('',(1.,0.E+000,0.E+000)); +#114 = ORIENTED_EDGE('',*,*,#115,.F.); +#115 = EDGE_CURVE('',#92,#108,#116,.T.); +#116 = LINE('',#117,#118); +#117 = CARTESIAN_POINT('',(1.03,-0.19,2.5)); +#118 = VECTOR('',#119,1.); +#119 = DIRECTION('',(0.E+000,1.,0.E+000)); +#120 = FACE_BOUND('',#121,.T.); +#121 = EDGE_LOOP('',(#122,#132,#140,#148)); +#122 = ORIENTED_EDGE('',*,*,#123,.F.); +#123 = EDGE_CURVE('',#124,#126,#128,.T.); +#124 = VERTEX_POINT('',#125); +#125 = CARTESIAN_POINT('',(0.24,-0.19,2.5)); +#126 = VERTEX_POINT('',#127); +#127 = CARTESIAN_POINT('',(-0.24,-0.19,2.5)); +#128 = LINE('',#129,#130); +#129 = CARTESIAN_POINT('',(0.24,-0.19,2.5)); +#130 = VECTOR('',#131,1.); +#131 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#132 = ORIENTED_EDGE('',*,*,#133,.F.); +#133 = EDGE_CURVE('',#134,#124,#136,.T.); +#134 = VERTEX_POINT('',#135); +#135 = CARTESIAN_POINT('',(0.24,0.19,2.5)); +#136 = LINE('',#137,#138); +#137 = CARTESIAN_POINT('',(0.24,0.19,2.5)); +#138 = VECTOR('',#139,1.); +#139 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#140 = ORIENTED_EDGE('',*,*,#141,.F.); +#141 = EDGE_CURVE('',#142,#134,#144,.T.); +#142 = VERTEX_POINT('',#143); +#143 = CARTESIAN_POINT('',(-0.24,0.19,2.5)); +#144 = LINE('',#145,#146); +#145 = CARTESIAN_POINT('',(-0.24,0.19,2.5)); +#146 = VECTOR('',#147,1.); +#147 = DIRECTION('',(1.,0.E+000,0.E+000)); +#148 = ORIENTED_EDGE('',*,*,#149,.F.); +#149 = EDGE_CURVE('',#126,#142,#150,.T.); +#150 = LINE('',#151,#152); +#151 = CARTESIAN_POINT('',(-0.24,-0.19,2.5)); +#152 = VECTOR('',#153,1.); +#153 = DIRECTION('',(0.E+000,1.,0.E+000)); +#154 = FACE_BOUND('',#155,.T.); +#155 = EDGE_LOOP('',(#156,#166,#174,#182)); +#156 = ORIENTED_EDGE('',*,*,#157,.F.); +#157 = EDGE_CURVE('',#158,#160,#162,.T.); +#158 = VERTEX_POINT('',#159); +#159 = CARTESIAN_POINT('',(2.78,0.19,2.5)); +#160 = VERTEX_POINT('',#161); +#161 = CARTESIAN_POINT('',(2.78,-0.19,2.5)); +#162 = LINE('',#163,#164); +#163 = CARTESIAN_POINT('',(2.78,0.19,2.5)); +#164 = VECTOR('',#165,1.); +#165 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#166 = ORIENTED_EDGE('',*,*,#167,.F.); +#167 = EDGE_CURVE('',#168,#158,#170,.T.); +#168 = VERTEX_POINT('',#169); +#169 = CARTESIAN_POINT('',(2.3,0.19,2.5)); +#170 = LINE('',#171,#172); +#171 = CARTESIAN_POINT('',(2.3,0.19,2.5)); +#172 = VECTOR('',#173,1.); +#173 = DIRECTION('',(1.,0.E+000,0.E+000)); +#174 = ORIENTED_EDGE('',*,*,#175,.F.); +#175 = EDGE_CURVE('',#176,#168,#178,.T.); +#176 = VERTEX_POINT('',#177); +#177 = CARTESIAN_POINT('',(2.3,-0.19,2.5)); +#178 = LINE('',#179,#180); +#179 = CARTESIAN_POINT('',(2.3,-0.19,2.5)); +#180 = VECTOR('',#181,1.); +#181 = DIRECTION('',(0.E+000,1.,0.E+000)); +#182 = ORIENTED_EDGE('',*,*,#183,.F.); +#183 = EDGE_CURVE('',#160,#176,#184,.T.); +#184 = LINE('',#185,#186); +#185 = CARTESIAN_POINT('',(2.78,-0.19,2.5)); +#186 = VECTOR('',#187,1.); +#187 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#188 = PLANE('',#189); +#189 = AXIS2_PLACEMENT_3D('',#190,#191,#192); +#190 = CARTESIAN_POINT('',(-0.745769083998,-1.33,2.5)); +#191 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#192 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#193 = ADVANCED_FACE('',(#194),#198,.F.); +#194 = FACE_BOUND('',#195,.T.); +#195 = EDGE_LOOP('',(#196,#197)); +#196 = ORIENTED_EDGE('',*,*,#31,.T.); +#197 = ORIENTED_EDGE('',*,*,#62,.T.); +#198 = PLANE('',#199); +#199 = AXIS2_PLACEMENT_3D('',#200,#201,#202); +#200 = CARTESIAN_POINT('',(-0.745769083998,-1.33,7.3)); +#201 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#202 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#203 = ADVANCED_FACE('',(#204),#229,.F.); +#204 = FACE_BOUND('',#205,.F.); +#205 = EDGE_LOOP('',(#206,#214,#222,#228)); +#206 = ORIENTED_EDGE('',*,*,#207,.T.); +#207 = EDGE_CURVE('',#90,#208,#210,.T.); +#208 = VERTEX_POINT('',#209); +#209 = CARTESIAN_POINT('',(1.51,-0.19,-2.5)); +#210 = LINE('',#211,#212); +#211 = CARTESIAN_POINT('',(1.51,-0.19,2.5)); +#212 = VECTOR('',#213,1.); +#213 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#214 = ORIENTED_EDGE('',*,*,#215,.T.); +#215 = EDGE_CURVE('',#208,#216,#218,.T.); +#216 = VERTEX_POINT('',#217); +#217 = CARTESIAN_POINT('',(1.03,-0.19,-2.5)); +#218 = LINE('',#219,#220); +#219 = CARTESIAN_POINT('',(1.51,-0.19,-2.5)); +#220 = VECTOR('',#221,1.); +#221 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#222 = ORIENTED_EDGE('',*,*,#223,.F.); +#223 = EDGE_CURVE('',#92,#216,#224,.T.); +#224 = LINE('',#225,#226); +#225 = CARTESIAN_POINT('',(1.03,-0.19,2.5)); +#226 = VECTOR('',#227,1.); +#227 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#228 = ORIENTED_EDGE('',*,*,#89,.F.); +#229 = PLANE('',#230); +#230 = AXIS2_PLACEMENT_3D('',#231,#232,#233); +#231 = CARTESIAN_POINT('',(1.51,-0.19,2.5)); +#232 = DIRECTION('',(0.E+000,1.,0.E+000)); +#233 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#234 = ADVANCED_FACE('',(#235),#253,.F.); +#235 = FACE_BOUND('',#236,.F.); +#236 = EDGE_LOOP('',(#237,#238,#246,#252)); +#237 = ORIENTED_EDGE('',*,*,#223,.T.); +#238 = ORIENTED_EDGE('',*,*,#239,.T.); +#239 = EDGE_CURVE('',#216,#240,#242,.T.); +#240 = VERTEX_POINT('',#241); +#241 = CARTESIAN_POINT('',(1.03,0.19,-2.5)); +#242 = LINE('',#243,#244); +#243 = CARTESIAN_POINT('',(1.03,-0.19,-2.5)); +#244 = VECTOR('',#245,1.); +#245 = DIRECTION('',(0.E+000,1.,0.E+000)); +#246 = ORIENTED_EDGE('',*,*,#247,.F.); +#247 = EDGE_CURVE('',#108,#240,#248,.T.); +#248 = LINE('',#249,#250); +#249 = CARTESIAN_POINT('',(1.03,0.19,2.5)); +#250 = VECTOR('',#251,1.); +#251 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#252 = ORIENTED_EDGE('',*,*,#115,.F.); +#253 = PLANE('',#254); +#254 = AXIS2_PLACEMENT_3D('',#255,#256,#257); +#255 = CARTESIAN_POINT('',(1.03,-0.19,2.5)); +#256 = DIRECTION('',(1.,0.E+000,0.E+000)); +#257 = DIRECTION('',(0.E+000,1.,0.E+000)); +#258 = ADVANCED_FACE('',(#259),#277,.F.); +#259 = FACE_BOUND('',#260,.F.); +#260 = EDGE_LOOP('',(#261,#262,#270,#276)); +#261 = ORIENTED_EDGE('',*,*,#247,.T.); +#262 = ORIENTED_EDGE('',*,*,#263,.T.); +#263 = EDGE_CURVE('',#240,#264,#266,.T.); +#264 = VERTEX_POINT('',#265); +#265 = CARTESIAN_POINT('',(1.51,0.19,-2.5)); +#266 = LINE('',#267,#268); +#267 = CARTESIAN_POINT('',(1.03,0.19,-2.5)); +#268 = VECTOR('',#269,1.); +#269 = DIRECTION('',(1.,0.E+000,0.E+000)); +#270 = ORIENTED_EDGE('',*,*,#271,.F.); +#271 = EDGE_CURVE('',#100,#264,#272,.T.); +#272 = LINE('',#273,#274); +#273 = CARTESIAN_POINT('',(1.51,0.19,2.5)); +#274 = VECTOR('',#275,1.); +#275 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#276 = ORIENTED_EDGE('',*,*,#107,.F.); +#277 = PLANE('',#278); +#278 = AXIS2_PLACEMENT_3D('',#279,#280,#281); +#279 = CARTESIAN_POINT('',(1.03,0.19,2.5)); +#280 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#281 = DIRECTION('',(1.,0.E+000,0.E+000)); +#282 = ADVANCED_FACE('',(#283),#294,.F.); +#283 = FACE_BOUND('',#284,.F.); +#284 = EDGE_LOOP('',(#285,#286,#292,#293)); +#285 = ORIENTED_EDGE('',*,*,#271,.T.); +#286 = ORIENTED_EDGE('',*,*,#287,.T.); +#287 = EDGE_CURVE('',#264,#208,#288,.T.); +#288 = LINE('',#289,#290); +#289 = CARTESIAN_POINT('',(1.51,0.19,-2.5)); +#290 = VECTOR('',#291,1.); +#291 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#292 = ORIENTED_EDGE('',*,*,#207,.F.); +#293 = ORIENTED_EDGE('',*,*,#99,.F.); +#294 = PLANE('',#295); +#295 = AXIS2_PLACEMENT_3D('',#296,#297,#298); +#296 = CARTESIAN_POINT('',(1.51,0.19,2.5)); +#297 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#298 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#299 = ADVANCED_FACE('',(#300),#325,.F.); +#300 = FACE_BOUND('',#301,.F.); +#301 = EDGE_LOOP('',(#302,#310,#318,#324)); +#302 = ORIENTED_EDGE('',*,*,#303,.T.); +#303 = EDGE_CURVE('',#124,#304,#306,.T.); +#304 = VERTEX_POINT('',#305); +#305 = CARTESIAN_POINT('',(0.24,-0.19,-2.5)); +#306 = LINE('',#307,#308); +#307 = CARTESIAN_POINT('',(0.24,-0.19,2.5)); +#308 = VECTOR('',#309,1.); +#309 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#310 = ORIENTED_EDGE('',*,*,#311,.T.); +#311 = EDGE_CURVE('',#304,#312,#314,.T.); +#312 = VERTEX_POINT('',#313); +#313 = CARTESIAN_POINT('',(-0.24,-0.19,-2.5)); +#314 = LINE('',#315,#316); +#315 = CARTESIAN_POINT('',(0.24,-0.19,-2.5)); +#316 = VECTOR('',#317,1.); +#317 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#318 = ORIENTED_EDGE('',*,*,#319,.F.); +#319 = EDGE_CURVE('',#126,#312,#320,.T.); +#320 = LINE('',#321,#322); +#321 = CARTESIAN_POINT('',(-0.24,-0.19,2.5)); +#322 = VECTOR('',#323,1.); +#323 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#324 = ORIENTED_EDGE('',*,*,#123,.F.); +#325 = PLANE('',#326); +#326 = AXIS2_PLACEMENT_3D('',#327,#328,#329); +#327 = CARTESIAN_POINT('',(0.24,-0.19,2.5)); +#328 = DIRECTION('',(0.E+000,1.,0.E+000)); +#329 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#330 = ADVANCED_FACE('',(#331),#349,.F.); +#331 = FACE_BOUND('',#332,.F.); +#332 = EDGE_LOOP('',(#333,#334,#342,#348)); +#333 = ORIENTED_EDGE('',*,*,#319,.T.); +#334 = ORIENTED_EDGE('',*,*,#335,.T.); +#335 = EDGE_CURVE('',#312,#336,#338,.T.); +#336 = VERTEX_POINT('',#337); +#337 = CARTESIAN_POINT('',(-0.24,0.19,-2.5)); +#338 = LINE('',#339,#340); +#339 = CARTESIAN_POINT('',(-0.24,-0.19,-2.5)); +#340 = VECTOR('',#341,1.); +#341 = DIRECTION('',(0.E+000,1.,0.E+000)); +#342 = ORIENTED_EDGE('',*,*,#343,.F.); +#343 = EDGE_CURVE('',#142,#336,#344,.T.); +#344 = LINE('',#345,#346); +#345 = CARTESIAN_POINT('',(-0.24,0.19,2.5)); +#346 = VECTOR('',#347,1.); +#347 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#348 = ORIENTED_EDGE('',*,*,#149,.F.); +#349 = PLANE('',#350); +#350 = AXIS2_PLACEMENT_3D('',#351,#352,#353); +#351 = CARTESIAN_POINT('',(-0.24,-0.19,2.5)); +#352 = DIRECTION('',(1.,0.E+000,0.E+000)); +#353 = DIRECTION('',(0.E+000,1.,0.E+000)); +#354 = ADVANCED_FACE('',(#355),#373,.F.); +#355 = FACE_BOUND('',#356,.F.); +#356 = EDGE_LOOP('',(#357,#358,#366,#372)); +#357 = ORIENTED_EDGE('',*,*,#343,.T.); +#358 = ORIENTED_EDGE('',*,*,#359,.T.); +#359 = EDGE_CURVE('',#336,#360,#362,.T.); +#360 = VERTEX_POINT('',#361); +#361 = CARTESIAN_POINT('',(0.24,0.19,-2.5)); +#362 = LINE('',#363,#364); +#363 = CARTESIAN_POINT('',(-0.24,0.19,-2.5)); +#364 = VECTOR('',#365,1.); +#365 = DIRECTION('',(1.,0.E+000,0.E+000)); +#366 = ORIENTED_EDGE('',*,*,#367,.F.); +#367 = EDGE_CURVE('',#134,#360,#368,.T.); +#368 = LINE('',#369,#370); +#369 = CARTESIAN_POINT('',(0.24,0.19,2.5)); +#370 = VECTOR('',#371,1.); +#371 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#372 = ORIENTED_EDGE('',*,*,#141,.F.); +#373 = PLANE('',#374); +#374 = AXIS2_PLACEMENT_3D('',#375,#376,#377); +#375 = CARTESIAN_POINT('',(-0.24,0.19,2.5)); +#376 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#377 = DIRECTION('',(1.,0.E+000,0.E+000)); +#378 = ADVANCED_FACE('',(#379),#390,.F.); +#379 = FACE_BOUND('',#380,.F.); +#380 = EDGE_LOOP('',(#381,#382,#388,#389)); +#381 = ORIENTED_EDGE('',*,*,#367,.T.); +#382 = ORIENTED_EDGE('',*,*,#383,.T.); +#383 = EDGE_CURVE('',#360,#304,#384,.T.); +#384 = LINE('',#385,#386); +#385 = CARTESIAN_POINT('',(0.24,0.19,-2.5)); +#386 = VECTOR('',#387,1.); +#387 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#388 = ORIENTED_EDGE('',*,*,#303,.F.); +#389 = ORIENTED_EDGE('',*,*,#133,.F.); +#390 = PLANE('',#391); +#391 = AXIS2_PLACEMENT_3D('',#392,#393,#394); +#392 = CARTESIAN_POINT('',(0.24,0.19,2.5)); +#393 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#394 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#395 = ADVANCED_FACE('',(#396),#421,.F.); +#396 = FACE_BOUND('',#397,.F.); +#397 = EDGE_LOOP('',(#398,#406,#414,#420)); +#398 = ORIENTED_EDGE('',*,*,#399,.T.); +#399 = EDGE_CURVE('',#158,#400,#402,.T.); +#400 = VERTEX_POINT('',#401); +#401 = CARTESIAN_POINT('',(2.78,0.19,-2.5)); +#402 = LINE('',#403,#404); +#403 = CARTESIAN_POINT('',(2.78,0.19,2.5)); +#404 = VECTOR('',#405,1.); +#405 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#406 = ORIENTED_EDGE('',*,*,#407,.T.); +#407 = EDGE_CURVE('',#400,#408,#410,.T.); +#408 = VERTEX_POINT('',#409); +#409 = CARTESIAN_POINT('',(2.78,-0.19,-2.5)); +#410 = LINE('',#411,#412); +#411 = CARTESIAN_POINT('',(2.78,0.19,-2.5)); +#412 = VECTOR('',#413,1.); +#413 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#414 = ORIENTED_EDGE('',*,*,#415,.F.); +#415 = EDGE_CURVE('',#160,#408,#416,.T.); +#416 = LINE('',#417,#418); +#417 = CARTESIAN_POINT('',(2.78,-0.19,2.5)); +#418 = VECTOR('',#419,1.); +#419 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#420 = ORIENTED_EDGE('',*,*,#157,.F.); +#421 = PLANE('',#422); +#422 = AXIS2_PLACEMENT_3D('',#423,#424,#425); +#423 = CARTESIAN_POINT('',(2.78,0.19,2.5)); +#424 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#425 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#426 = ADVANCED_FACE('',(#427),#445,.F.); +#427 = FACE_BOUND('',#428,.F.); +#428 = EDGE_LOOP('',(#429,#430,#438,#444)); +#429 = ORIENTED_EDGE('',*,*,#415,.T.); +#430 = ORIENTED_EDGE('',*,*,#431,.T.); +#431 = EDGE_CURVE('',#408,#432,#434,.T.); +#432 = VERTEX_POINT('',#433); +#433 = CARTESIAN_POINT('',(2.3,-0.19,-2.5)); +#434 = LINE('',#435,#436); +#435 = CARTESIAN_POINT('',(2.78,-0.19,-2.5)); +#436 = VECTOR('',#437,1.); +#437 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#438 = ORIENTED_EDGE('',*,*,#439,.F.); +#439 = EDGE_CURVE('',#176,#432,#440,.T.); +#440 = LINE('',#441,#442); +#441 = CARTESIAN_POINT('',(2.3,-0.19,2.5)); +#442 = VECTOR('',#443,1.); +#443 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#444 = ORIENTED_EDGE('',*,*,#183,.F.); +#445 = PLANE('',#446); +#446 = AXIS2_PLACEMENT_3D('',#447,#448,#449); +#447 = CARTESIAN_POINT('',(2.78,-0.19,2.5)); +#448 = DIRECTION('',(0.E+000,1.,0.E+000)); +#449 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#450 = ADVANCED_FACE('',(#451),#469,.F.); +#451 = FACE_BOUND('',#452,.F.); +#452 = EDGE_LOOP('',(#453,#454,#462,#468)); +#453 = ORIENTED_EDGE('',*,*,#439,.T.); +#454 = ORIENTED_EDGE('',*,*,#455,.T.); +#455 = EDGE_CURVE('',#432,#456,#458,.T.); +#456 = VERTEX_POINT('',#457); +#457 = CARTESIAN_POINT('',(2.3,0.19,-2.5)); +#458 = LINE('',#459,#460); +#459 = CARTESIAN_POINT('',(2.3,-0.19,-2.5)); +#460 = VECTOR('',#461,1.); +#461 = DIRECTION('',(0.E+000,1.,0.E+000)); +#462 = ORIENTED_EDGE('',*,*,#463,.F.); +#463 = EDGE_CURVE('',#168,#456,#464,.T.); +#464 = LINE('',#465,#466); +#465 = CARTESIAN_POINT('',(2.3,0.19,2.5)); +#466 = VECTOR('',#467,1.); +#467 = DIRECTION('',(-0.E+000,-0.E+000,-1.)); +#468 = ORIENTED_EDGE('',*,*,#175,.F.); +#469 = PLANE('',#470); +#470 = AXIS2_PLACEMENT_3D('',#471,#472,#473); +#471 = CARTESIAN_POINT('',(2.3,-0.19,2.5)); +#472 = DIRECTION('',(1.,0.E+000,0.E+000)); +#473 = DIRECTION('',(0.E+000,1.,0.E+000)); +#474 = ADVANCED_FACE('',(#475),#486,.F.); +#475 = FACE_BOUND('',#476,.F.); +#476 = EDGE_LOOP('',(#477,#478,#484,#485)); +#477 = ORIENTED_EDGE('',*,*,#463,.T.); +#478 = ORIENTED_EDGE('',*,*,#479,.T.); +#479 = EDGE_CURVE('',#456,#400,#480,.T.); +#480 = LINE('',#481,#482); +#481 = CARTESIAN_POINT('',(2.3,0.19,-2.5)); +#482 = VECTOR('',#483,1.); +#483 = DIRECTION('',(1.,0.E+000,0.E+000)); +#484 = ORIENTED_EDGE('',*,*,#399,.F.); +#485 = ORIENTED_EDGE('',*,*,#167,.F.); +#486 = PLANE('',#487); +#487 = AXIS2_PLACEMENT_3D('',#488,#489,#490); +#488 = CARTESIAN_POINT('',(2.3,0.19,2.5)); +#489 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#490 = DIRECTION('',(1.,0.E+000,0.E+000)); +#491 = ADVANCED_FACE('',(#492),#498,.F.); +#492 = FACE_BOUND('',#493,.T.); +#493 = EDGE_LOOP('',(#494,#495,#496,#497)); +#494 = ORIENTED_EDGE('',*,*,#263,.T.); +#495 = ORIENTED_EDGE('',*,*,#287,.T.); +#496 = ORIENTED_EDGE('',*,*,#215,.T.); +#497 = ORIENTED_EDGE('',*,*,#239,.T.); +#498 = PLANE('',#499); +#499 = AXIS2_PLACEMENT_3D('',#500,#501,#502); +#500 = CARTESIAN_POINT('',(1.03,0.19,-2.5)); +#501 = DIRECTION('',(0.E+000,0.E+000,1.)); +#502 = DIRECTION('',(1.,0.E+000,0.E+000)); +#503 = ADVANCED_FACE('',(#504),#510,.F.); +#504 = FACE_BOUND('',#505,.T.); +#505 = EDGE_LOOP('',(#506,#507,#508,#509)); +#506 = ORIENTED_EDGE('',*,*,#359,.T.); +#507 = ORIENTED_EDGE('',*,*,#383,.T.); +#508 = ORIENTED_EDGE('',*,*,#311,.T.); +#509 = ORIENTED_EDGE('',*,*,#335,.T.); +#510 = PLANE('',#511); +#511 = AXIS2_PLACEMENT_3D('',#512,#513,#514); +#512 = CARTESIAN_POINT('',(-0.24,0.19,-2.5)); +#513 = DIRECTION('',(0.E+000,0.E+000,1.)); +#514 = DIRECTION('',(1.,0.E+000,0.E+000)); +#515 = ADVANCED_FACE('',(#516),#522,.F.); +#516 = FACE_BOUND('',#517,.T.); +#517 = EDGE_LOOP('',(#518,#519,#520,#521)); +#518 = ORIENTED_EDGE('',*,*,#479,.T.); +#519 = ORIENTED_EDGE('',*,*,#407,.T.); +#520 = ORIENTED_EDGE('',*,*,#431,.T.); +#521 = ORIENTED_EDGE('',*,*,#455,.T.); +#522 = PLANE('',#523); +#523 = AXIS2_PLACEMENT_3D('',#524,#525,#526); +#524 = CARTESIAN_POINT('',(2.3,0.19,-2.5)); +#525 = DIRECTION('',(0.E+000,0.E+000,1.)); +#526 = DIRECTION('',(1.,0.E+000,0.E+000)); +#527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#531)) GLOBAL_UNIT_ASSIGNED_CONTEXT +((#528,#529,#530)) REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#528 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#529 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#530 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#531 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-007),#528, + 'distance_accuracy_value','confusion accuracy'); +#532 = PRODUCT_TYPE('part',$,(#7)); +#533 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#534, + #542,#549,#556,#563,#571,#578,#585,#592,#599,#606,#613,#620,#627, + #634,#641,#648,#655,#662),#527); +#534 = STYLED_ITEM('color',(#535),#17); +#535 = PRESENTATION_STYLE_ASSIGNMENT((#536)); +#536 = SURFACE_STYLE_USAGE(.BOTH.,#537); +#537 = SURFACE_SIDE_STYLE('',(#538)); +#538 = SURFACE_STYLE_FILL_AREA(#539); +#539 = FILL_AREA_STYLE('',(#540)); +#540 = FILL_AREA_STYLE_COLOUR('',#541); +#541 = COLOUR_RGB('',0.148000001907,0.144999995828,0.144999995828); +#542 = STYLED_ITEM('color',(#543),#57); +#543 = PRESENTATION_STYLE_ASSIGNMENT((#544)); +#544 = SURFACE_STYLE_USAGE(.BOTH.,#545); +#545 = SURFACE_SIDE_STYLE('',(#546)); +#546 = SURFACE_STYLE_FILL_AREA(#547); +#547 = FILL_AREA_STYLE('',(#548)); +#548 = FILL_AREA_STYLE_COLOUR('',#541); +#549 = STYLED_ITEM('color',(#550),#81); +#550 = PRESENTATION_STYLE_ASSIGNMENT((#551)); +#551 = SURFACE_STYLE_USAGE(.BOTH.,#552); +#552 = SURFACE_SIDE_STYLE('',(#553)); +#553 = SURFACE_STYLE_FILL_AREA(#554); +#554 = FILL_AREA_STYLE('',(#555)); +#555 = FILL_AREA_STYLE_COLOUR('',#541); +#556 = STYLED_ITEM('color',(#557),#193); +#557 = PRESENTATION_STYLE_ASSIGNMENT((#558)); +#558 = SURFACE_STYLE_USAGE(.BOTH.,#559); +#559 = SURFACE_SIDE_STYLE('',(#560)); +#560 = SURFACE_STYLE_FILL_AREA(#561); +#561 = FILL_AREA_STYLE('',(#562)); +#562 = FILL_AREA_STYLE_COLOUR('',#541); +#563 = STYLED_ITEM('color',(#564),#203); +#564 = PRESENTATION_STYLE_ASSIGNMENT((#565)); +#565 = SURFACE_STYLE_USAGE(.BOTH.,#566); +#566 = SURFACE_SIDE_STYLE('',(#567)); +#567 = SURFACE_STYLE_FILL_AREA(#568); +#568 = FILL_AREA_STYLE('',(#569)); +#569 = FILL_AREA_STYLE_COLOUR('',#570); +#570 = COLOUR_RGB('',0.824000000954,0.819999992847,0.78100001812); +#571 = STYLED_ITEM('color',(#572),#234); +#572 = PRESENTATION_STYLE_ASSIGNMENT((#573)); +#573 = SURFACE_STYLE_USAGE(.BOTH.,#574); +#574 = SURFACE_SIDE_STYLE('',(#575)); +#575 = SURFACE_STYLE_FILL_AREA(#576); +#576 = FILL_AREA_STYLE('',(#577)); +#577 = FILL_AREA_STYLE_COLOUR('',#570); +#578 = STYLED_ITEM('color',(#579),#258); +#579 = PRESENTATION_STYLE_ASSIGNMENT((#580)); +#580 = SURFACE_STYLE_USAGE(.BOTH.,#581); +#581 = SURFACE_SIDE_STYLE('',(#582)); +#582 = SURFACE_STYLE_FILL_AREA(#583); +#583 = FILL_AREA_STYLE('',(#584)); +#584 = FILL_AREA_STYLE_COLOUR('',#570); +#585 = STYLED_ITEM('color',(#586),#282); +#586 = PRESENTATION_STYLE_ASSIGNMENT((#587)); +#587 = SURFACE_STYLE_USAGE(.BOTH.,#588); +#588 = SURFACE_SIDE_STYLE('',(#589)); +#589 = SURFACE_STYLE_FILL_AREA(#590); +#590 = FILL_AREA_STYLE('',(#591)); +#591 = FILL_AREA_STYLE_COLOUR('',#570); +#592 = STYLED_ITEM('color',(#593),#299); +#593 = PRESENTATION_STYLE_ASSIGNMENT((#594)); +#594 = SURFACE_STYLE_USAGE(.BOTH.,#595); +#595 = SURFACE_SIDE_STYLE('',(#596)); +#596 = SURFACE_STYLE_FILL_AREA(#597); +#597 = FILL_AREA_STYLE('',(#598)); +#598 = FILL_AREA_STYLE_COLOUR('',#570); +#599 = STYLED_ITEM('color',(#600),#330); +#600 = PRESENTATION_STYLE_ASSIGNMENT((#601)); +#601 = SURFACE_STYLE_USAGE(.BOTH.,#602); +#602 = SURFACE_SIDE_STYLE('',(#603)); +#603 = SURFACE_STYLE_FILL_AREA(#604); +#604 = FILL_AREA_STYLE('',(#605)); +#605 = FILL_AREA_STYLE_COLOUR('',#570); +#606 = STYLED_ITEM('color',(#607),#354); +#607 = PRESENTATION_STYLE_ASSIGNMENT((#608)); +#608 = SURFACE_STYLE_USAGE(.BOTH.,#609); +#609 = SURFACE_SIDE_STYLE('',(#610)); +#610 = SURFACE_STYLE_FILL_AREA(#611); +#611 = FILL_AREA_STYLE('',(#612)); +#612 = FILL_AREA_STYLE_COLOUR('',#570); +#613 = STYLED_ITEM('color',(#614),#378); +#614 = PRESENTATION_STYLE_ASSIGNMENT((#615)); +#615 = SURFACE_STYLE_USAGE(.BOTH.,#616); +#616 = SURFACE_SIDE_STYLE('',(#617)); +#617 = SURFACE_STYLE_FILL_AREA(#618); +#618 = FILL_AREA_STYLE('',(#619)); +#619 = FILL_AREA_STYLE_COLOUR('',#570); +#620 = STYLED_ITEM('color',(#621),#395); +#621 = PRESENTATION_STYLE_ASSIGNMENT((#622)); +#622 = SURFACE_STYLE_USAGE(.BOTH.,#623); +#623 = SURFACE_SIDE_STYLE('',(#624)); +#624 = SURFACE_STYLE_FILL_AREA(#625); +#625 = FILL_AREA_STYLE('',(#626)); +#626 = FILL_AREA_STYLE_COLOUR('',#570); +#627 = STYLED_ITEM('color',(#628),#426); +#628 = PRESENTATION_STYLE_ASSIGNMENT((#629)); +#629 = SURFACE_STYLE_USAGE(.BOTH.,#630); +#630 = SURFACE_SIDE_STYLE('',(#631)); +#631 = SURFACE_STYLE_FILL_AREA(#632); +#632 = FILL_AREA_STYLE('',(#633)); +#633 = FILL_AREA_STYLE_COLOUR('',#570); +#634 = STYLED_ITEM('color',(#635),#450); +#635 = PRESENTATION_STYLE_ASSIGNMENT((#636)); +#636 = SURFACE_STYLE_USAGE(.BOTH.,#637); +#637 = SURFACE_SIDE_STYLE('',(#638)); +#638 = SURFACE_STYLE_FILL_AREA(#639); +#639 = FILL_AREA_STYLE('',(#640)); +#640 = FILL_AREA_STYLE_COLOUR('',#570); +#641 = STYLED_ITEM('color',(#642),#474); +#642 = PRESENTATION_STYLE_ASSIGNMENT((#643)); +#643 = SURFACE_STYLE_USAGE(.BOTH.,#644); +#644 = SURFACE_SIDE_STYLE('',(#645)); +#645 = SURFACE_STYLE_FILL_AREA(#646); +#646 = FILL_AREA_STYLE('',(#647)); +#647 = FILL_AREA_STYLE_COLOUR('',#570); +#648 = STYLED_ITEM('color',(#649),#491); +#649 = PRESENTATION_STYLE_ASSIGNMENT((#650)); +#650 = SURFACE_STYLE_USAGE(.BOTH.,#651); +#651 = SURFACE_SIDE_STYLE('',(#652)); +#652 = SURFACE_STYLE_FILL_AREA(#653); +#653 = FILL_AREA_STYLE('',(#654)); +#654 = FILL_AREA_STYLE_COLOUR('',#570); +#655 = STYLED_ITEM('color',(#656),#503); +#656 = PRESENTATION_STYLE_ASSIGNMENT((#657)); +#657 = SURFACE_STYLE_USAGE(.BOTH.,#658); +#658 = SURFACE_SIDE_STYLE('',(#659)); +#659 = SURFACE_STYLE_FILL_AREA(#660); +#660 = FILL_AREA_STYLE('',(#661)); +#661 = FILL_AREA_STYLE_COLOUR('',#570); +#662 = STYLED_ITEM('color',(#663),#515); +#663 = PRESENTATION_STYLE_ASSIGNMENT((#664)); +#664 = SURFACE_STYLE_USAGE(.BOTH.,#665); +#665 = SURFACE_SIDE_STYLE('',(#666)); +#666 = SURFACE_STYLE_FILL_AREA(#667); +#667 = FILL_AREA_STYLE('',(#668)); +#668 = FILL_AREA_STYLE_COLOUR('',#570); +ENDSEC; +END-ISO-10303-21;
package.jsonadded+162@@ -0,0 +1,162 @@+{+ "slug": "mcp1700-3002e",+ "version": "0.1.0",+ "type": "component",+ "description": "Microchip Tech , TO-92-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "ic",+ "mcp1700-3002e",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "mcp1700-3002e.kicad_sym",+ "mcp1700-3002e.kicad_mod",+ "mcp1700-3002e.glb",+ "mcp1700-3002e.step",+ "mcp1700-3002e.lbr",+ "docs/hero.png",+ "docs/mcp1700-3002e-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "mcp1700-3002e-hero.glb",+ "mcp1700-3002e-hero.overlay.json",+ "mcp1700-3002e-etched.glb"+ ],+ "component": {+ "mpn": "MCP1700-3002E",+ "manufacturer": "Microchip Tech",+ "package": "TO-92-3",+ "pin_count": 3,+ "category": "IC",+ "subcategory": "IC",+ "datasheet": "https://www.waldom.com/productfiles/mf-mip/21826b.pdf",+ "parts": {+ "symbol": "mcp1700-3002e.kicad_sym",+ "footprint": "mcp1700-3002e.kicad_mod",+ "model_3d": "mcp1700-3002e-hero.glb",+ "model_3d_plain": "mcp1700-3002e-etched.glb",+ "model_3d_step": "mcp1700-3002e-etched.step",+ "model_3d_step_plain": "mcp1700-3002e.step",+ "lbr": "mcp1700-3002e.lbr"+ },+ "distributor_links": {+ "lcsc": "C185558"+ },+ "distributor_check": {+ "checked_at": "2026-10-23T12:42:34Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Regulator ground; tie to the negative side of the output and input capacitors, only the 1.6 µA typical LDO bias current flows out of this pin and output regulation is referenced to it."+ },+ {+ "number": "2",+ "name": "VIN",+ "type": "power_in",+ "description": "Unregulated supply voltage input (2.3V to 6.0V operating range); connect to the input source with about 1 µF of capacitance for stable operation."+ },+ {+ "number": "3",+ "name": "VOUT",+ "type": "power_out",+ "description": "Regulated voltage output; connect to the positive side of the load and output capacitor, and the current flowing out equals the DC load current (up to 250 mA for VOUT ≥ 2.5V)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The TO-92 pin order in the Table 3-1 text (GND=1, VIN=2, VOUT=3) matches the SOT-89 column, but the "+ ],+ "pages_sent": 7,+ "cost_usd": 0.0665,+ "at": "2026-10-23T12:42:20"+ },+ "datasheet": {+ "url": "https://www.waldom.com/productfiles/mf-mip/21826b.pdf",+ "pages": 24,+ "sha256": "8b0857ed5a391656",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 3,+ "described": 3,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "mcp1700-3002e.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 4.83,+ 3.745,+ 9.8+ ],+ "zmin_mm": -2.5,+ "centre_offset_mm": 0.542,+ "footprint_binding": "identity",+ "sha256": "f0b61c32ecbf0067157adc5a3d4966ceadf5d6dafe93c51af35f76c41c71a54a",+ "checked": "2026-10-23",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "mcp1700-3002e-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 4.83,+ 3.745,+ 9.8+ ],+ "zmin_mm": -2.5,+ "centre_offset_mm": 0.542,+ "footprint_binding": "identity",+ "sha256": "aa6a7ad3c40b372cc92884b771d592cfa26e94c0eb8ab80832e1b30a920cd8eb",+ "checked": "2026-10-23",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+168@@ -0,0 +1,168 @@+{+ "slug": "mcp1700-3002e",+ "version": "0.1.0",+ "type": "component",+ "description": "Microchip Tech , TO-92-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "ic",+ "mcp1700-3002e",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "mcp1700-3002e.kicad_sym",+ "mcp1700-3002e.kicad_mod",+ "mcp1700-3002e.glb",+ "mcp1700-3002e.step",+ "mcp1700-3002e.lbr",+ "docs/hero.png",+ "docs/mcp1700-3002e-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "mcp1700-3002e-hero.glb",+ "mcp1700-3002e-hero.overlay.json",+ "mcp1700-3002e-etched.glb"+ ],+ "component": {+ "mpn": "MCP1700-3002E",+ "manufacturer": "Microchip Tech",+ "package": "TO-92-3",+ "pin_count": 3,+ "category": "IC",+ "subcategory": "IC",+ "datasheet": "https://www.waldom.com/productfiles/mf-mip/21826b.pdf",+ "parts": {+ "symbol": "mcp1700-3002e.kicad_sym",+ "footprint": "mcp1700-3002e.kicad_mod",+ "model_3d": "mcp1700-3002e-hero.glb",+ "model_3d_plain": "mcp1700-3002e-etched.glb",+ "model_3d_step": "mcp1700-3002e-etched.step",+ "model_3d_step_plain": "mcp1700-3002e.step",+ "lbr": "mcp1700-3002e.lbr"+ },+ "distributor_links": {+ "lcsc": "C185558"+ },+ "distributor_check": {+ "checked_at": "2026-10-23T12:42:34Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Regulator ground; tie to the negative side of the output and input capacitors, only the 1.6 µA typical LDO bias current flows out of this pin and output regulation is referenced to it."+ },+ {+ "number": "2",+ "name": "VIN",+ "type": "power_in",+ "description": "Unregulated supply voltage input (2.3V to 6.0V operating range); connect to the input source with about 1 µF of capacitance for stable operation."+ },+ {+ "number": "3",+ "name": "VOUT",+ "type": "power_out",+ "description": "Regulated voltage output; connect to the positive side of the load and output capacitor, and the current flowing out equals the DC load current (up to 250 mA for VOUT ≥ 2.5V)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The TO-92 pin order in the Table 3-1 text (GND=1, VIN=2, VOUT=3) matches the SOT-89 column, but the "+ ],+ "pages_sent": 7,+ "cost_usd": 0.0665,+ "at": "2026-10-23T12:42:20"+ },+ "datasheet": {+ "url": "https://www.waldom.com/productfiles/mf-mip/21826b.pdf",+ "pages": 24,+ "sha256": "8b0857ed5a391656",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 3,+ "described": 3,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "mcp1700-3002e.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 4.83,+ 3.745,+ 9.8+ ],+ "zmin_mm": -2.5,+ "centre_offset_mm": 0.542,+ "footprint_binding": "identity",+ "sha256": "f0b61c32ecbf0067157adc5a3d4966ceadf5d6dafe93c51af35f76c41c71a54a",+ "checked": "2026-10-23",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "mcp1700-3002e-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 4.83,+ 3.745,+ 9.8+ ],+ "zmin_mm": -2.5,+ "centre_offset_mm": 0.542,+ "footprint_binding": "identity",+ "sha256": "aa6a7ad3c40b372cc92884b771d592cfa26e94c0eb8ab80832e1b30a920cd8eb",+ "checked": "2026-10-23",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>mcp1700-3002e</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>mcp1700-3002e</title>