← Commit history
mc7912bd2tr4g: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+45−1
page.json+45−1@@ -33,5 +33,49 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "MC7912BD2TR4G",+ "manufacturer": "onsemi",+ "package": "D2PAK",+ "pin_count": 3,+ "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.onsemi.com/pdf/datasheet/mc7912bd2tr4-d.pdf",+ "parts": {+ "symbol": "mc7912bd2tr4g.kicad_sym",+ "footprint": "mc7912bd2tr4g.kicad_mod",+ "model_3d": "mc7912bd2tr4g-etched.glb",+ "model_3d_plain": "mc7912bd2tr4g.glb",+ "model_3d_step": "mc7912bd2tr4g-etched.step",+ "model_3d_step_plain": "mc7912bd2tr4g.step",+ "lbr": "mc7912bd2tr4g.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference. Common ground required between input and output voltages. In the D2PAK package, the heatsink tab (shown as terminal 4 in the case outline) is internally connected to Pin 2 (Input), NOT to this ground pin."+ },+ {+ "number": "2",+ "name": "VI",+ "type": "power_in",+ "description": "Negative input voltage. Must remain typically 2.0 V more negative than VO even during the high point of the input ripple (dropout ≈ 1.3 V typ at IO = 1.0 A). Absolute maximum VI = −35 Vdc for the −12 V option. Recommended input bypass: 0.33 μF tantalum or equivalent low-ESR cap mounted with short leads."+ },+ {+ "number": "3",+ "name": "VO",+ "type": "power_out",+ "description": "Regulated −12 V output. Nominal VO = −12 V with ±4% tolerance (VO = −11.5 V to −12.5 V at TJ = +25°C for the MC7912B grade). Delivers >1.0 A with adequate heatsinking; internally current-limited and thermally protected. A 1.0 μF output capacitor is recommended for stability and transient response."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}