← Commit history

mc78m08bdtrkg: factory component page (tier=mfr)

Ray ·1f702b7549 · ·parent e3d4dbf
4 files changed +51−44
README.md+8−9
@@ -8,9 +8,10 @@ MC78M08BDTRKG from onsemi, in a DPAK. Pinout and pin descriptions extracted from  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | Input | power_in | Unregulated positive DC input. Recommended operating range approximately 10.5 V to 25 V for the 8 V variant; absolute maximum 35 V (V_I - V_O dropout typ. 2.0 V). Bypass to ground with ceramic capacitor close to the pin. |-| 2 | Ground | power_in | Common ground reference for input and output. The DPAK heatsink surface (terminal 4 in the case outline) is internally connected to this pin, so the exposed tab must be at ground potential. |-| 3 | Output | power_out | Regulated +8.0 V output, ±4% tolerance (B grade). Delivers up to 500 mA with adequate heatsinking (peak 700 mA). Recommend a small output capacitor for transient response. |+| 1 | VI | power_in | Unregulated positive input voltage. Absolute maximum 35 Vdc (40 Vdc for 20 V/24 V options). For 8 V output operation, VI ≥ ~10.5 V is recommended (dropout ≈ 2.0 V typ). |+| 2 | GND | power_in | Common/ground reference. Also serves as the thermal path: the DPAK heatsink surface (terminal 4 in the case outline drawing) is internally connected to Pin 2. |+| 3 | VO | power_out | Regulated +8.0 V output (7.70-8.30 V for MC78M08B/C, 7.84-8.16 V for MC78M08AB/AC over temperature). Rated for 500 mA continuous with adequate heatsinking; internal short-circuit current limit ≈ 350 mA typ. |+| 4 | TAB | passive | Exposed thermal pad / heatsink surface on the back of the DPAK-3 package. Internally connected to Pin 2 (GND). Solder to a copper pour for heat dissipation. |  ## Key specifications @@ -19,15 +20,13 @@ MC78M08BDTRKG from onsemi, in a DPAK. Pinout and pin descriptions extracted from | Manufacturer | onsemi | | Package | DPAK | | Category | PMIC |-| Pins | 3 |+| Pins | 4 |  ## Ordering variants -- `MC78M08BDTRKGBDTRKG`-- `MC78M08BDTRKGBTG`-- `MC78M08BDTRKGCTG`-- `MC78M08BDTRKGABTG`-- `MC78M08BDTRKGACTG`+- `MC78M08BDTRKGDTRKG`+- `MC78M08BDTRKGDTG`+- `MC78M08BDTRKGTG`  ## CAD (KiCad official) 
mc78m08bdtrkg.kicad_sym+8−4
@@ -9,15 +9,19 @@     )     (symbol "MC78M08BDTRKG_1_1"     (pin power_in line (at -17.78 0.00 0) (length 5.08)-      (name "Input" (effects (font (size 1.27 1.27))))+      (name "VI" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )     (pin power_in line (at -17.78 -2.54 0) (length 5.08)-      (name "Ground" (effects (font (size 1.27 1.27))))+      (name "GND" (effects (font (size 1.27 1.27))))       (number "2" (effects (font (size 1.27 1.27))))     )-    (pin power_out line (at 17.78 0.00 180) (length 5.08)-      (name "Output" (effects (font (size 1.27 1.27))))+    (pin passive line (at 17.78 0.00 180) (length 5.08)+      (name "TAB" (effects (font (size 1.27 1.27))))+      (number "4" (effects (font (size 1.27 1.27))))+    )+    (pin power_out line (at 17.78 -2.54 180) (length 5.08)+      (name "VO" (effects (font (size 1.27 1.27))))       (number "3" (effects (font (size 1.27 1.27))))     )     )
mc78m08bdtrkg.lbr+18−17
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>TO-252-2 (symbol synthesized from footprint pads)</description> <packages> <package name="TO-252-2">   <description>3 pads, 10.6 x 5.8 mm. TO-252/DPAK SMD package</description>@@ -87,30 +87,31 @@ </package> </packages> <symbols>-<symbol name="MC78M08BDTRKG">-  <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>-  <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/>-  <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>-  <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="2.54" width="0.254" layer="94"/>-  <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">&gt;NAME</text>-  <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">&gt;VALUE</text>-  <pin name="Input" x="-17.78" y="0" length="middle" direction="pwr"/>-  <pin name="Ground" x="-17.78" y="-2.54" length="middle" direction="pwr"/>-  <pin name="Output" x="17.78" y="0" length="middle" direction="out" rot="R180"/>+<symbol name="TO-252-2">+  <description>TO-252-2 (symbol synthesized from footprint pads)</description>+  <wire x1="-7.62" y1="3.81" x2="7.62" y2="3.81" width="0.254" layer="94"/>+  <wire x1="7.62" y1="3.81" x2="7.62" y2="-3.81" width="0.254" layer="94"/>+  <wire x1="7.62" y1="-3.81" x2="-7.62" y2="-3.81" width="0.254" layer="94"/>+  <wire x1="-7.62" y1="-3.81" x2="-7.62" y2="3.81" width="0.254" layer="94"/>+  <text x="0" y="6.35" size="1.27" layer="95" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-6.35" size="1.27" layer="96" align="top-center">&gt;VALUE</text>+  <pin name="1" x="-12.7" y="2.54" length="short" direction="pas"/>+  <pin name="2" x="-12.7" y="0" length="short" direction="pas"/>+  <pin name="3" x="12.7" y="2.54" length="short" direction="pas" rot="R180"/> </symbol> </symbols> <devicesets>-<deviceset name="MC78M08BDTRKG" prefix="U">-  <description></description>+<deviceset name="TO-252-2" prefix="U">+  <description>TO-252-2 (symbol synthesized from footprint pads)</description>   <gates>-    <gate name="G$1" symbol="MC78M08BDTRKG" x="0" y="0"/>+    <gate name="G$1" symbol="TO-252-2" x="0" y="0"/>   </gates>   <devices>     <device name="" package="TO-252-2">       <connects>-        <connect gate="G$1" pin="Input" pad="1"/>-        <connect gate="G$1" pin="Ground" pad="2"/>-        <connect gate="G$1" pin="Output" pad="3"/>+        <connect gate="G$1" pin="1" pad="1"/>+        <connect gate="G$1" pin="2" pad="2"/>+        <connect gate="G$1" pin="3" pad="3"/>       </connects>       <technologies><technology name=""/></technologies>     </device>
page.json+17−14
@@ -15,7 +15,7 @@     "mpn": "MC78M08BDTRKG",     "manufacturer": "onsemi",     "package": "DPAK",-    "pin_count": 3,+    "pin_count": 4,     "category": "PMIC",     "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",     "datasheet": "https://www.onsemi.com/pdf/datasheet/mc78m08bdtrk-d.pdf",@@ -30,21 +30,27 @@     "pins": [       {         "number": "1",-        "name": "Input",+        "name": "VI",         "type": "power_in",-        "description": "Unregulated positive DC input. Recommended operating range approximately 10.5 V to 25 V for the 8 V variant; absolute maximum 35 V (V_I - V_O dropout typ. 2.0 V). Bypass to ground with ceramic capacitor close to the pin."+        "description": "Unregulated positive input voltage. Absolute maximum 35 Vdc (40 Vdc for 20 V/24 V options). For 8 V output operation, VI \u2265 ~10.5 V is recommended (dropout \u2248 2.0 V typ)."       },       {         "number": "2",-        "name": "Ground",+        "name": "GND",         "type": "power_in",-        "description": "Common ground reference for input and output. The DPAK heatsink surface (terminal 4 in the case outline) is internally connected to this pin, so the exposed tab must be at ground potential."+        "description": "Common/ground reference. Also serves as the thermal path: the DPAK heatsink surface (terminal 4 in the case outline drawing) is internally connected to Pin 2."       },       {         "number": "3",-        "name": "Output",+        "name": "VO",         "type": "power_out",-        "description": "Regulated +8.0 V output, ±4% tolerance (B grade). Delivers up to 500 mA with adequate heatsinking (peak 700 mA). Recommend a small output capacitor for transient response."+        "description": "Regulated +8.0 V output (7.70-8.30 V for MC78M08B/C, 7.84-8.16 V for MC78M08AB/AC over temperature). Rated for 500 mA continuous with adequate heatsinking; internal short-circuit current limit \u2248 350 mA typ."+      },+      {+        "number": "4",+        "name": "TAB",+        "type": "passive",+        "description": "Exposed thermal pad / heatsink surface on the back of the DPAK-3 package. Internally connected to Pin 2 (GND). Solder to a copper pour for heat dissipation."       }     ],     "provenance": {@@ -57,8 +63,8 @@       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {-        "total": 3,-        "described": 3,+        "total": 4,+        "described": 4,         "cites_pages": true,         "refuses_to_fabricate": true       }@@ -73,7 +79,7 @@       "Manufacturer": "onsemi",       "Package": "DPAK",       "Category": "PMIC",-      "Pins": "3"+      "Pins": "4"     }   },   "sections": [@@ -108,8 +114,5 @@     "docs/mc78m08bdtrkg-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": {-    "public": true-  }+  ] }\ No newline at end of file