← Commit history
README.md+15−15
@@ -8,9 +8,9 @@ MC7805CTG from onsemi, in a TO-220. Pinout and pin descriptions extracted from t  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | Input | power_in | The input voltage must remain typically 2.0 V above the output voltage even during the low point on the input ripple voltage. |-| 2 | Ground | power_in | A common ground is required between the input and the output voltages, and the heatsink surface is connected to this pin. |-| 3 | Output | power_out | The regulated output; an output capacitor CO improves transient response, and values of less than 0.1 µF could cause instability. |+| 1 | Input | power_in | Unregulated input voltage; it must remain typically 2.0 V above the output voltage even during the low point of the input ripple voltage. |+| 2 | Ground | power_in | Common ground, which must be shared between input and output voltages; the heatsink surface is connected to this pin. |+| 3 | Output | power_out | Regulated 5.0 V output (MC7805C), specified from 4.75 V to 5.25 V over 5.0 mA ≤ IO ≤ 1.0 A and PD ≤ 15 W. |  ## Key specifications @@ -28,7 +28,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---| | Output Voltage (TJ = 25°C) | VO | 4.8 | 5 | 5.2 | Vdc | TJ = 25°C | 3 |-| Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) | VO | 4.75 | 5 | 5.25 | Vdc | 5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W; 7.0 Vdc ≤ Vin ≤ 20 Vdc | 3 |+| Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) | VO | 4.75 | 5 | 5.25 | Vdc | 7.0 Vdc ≤ Vin ≤ 20 Vdc; 8.0 Vdc ≤ Vin ≤ 20 Vdc | 3 | | Line Regulation | Regline |  | 0.5 | 20 | mV | 7.5 Vdc ≤ Vin ≤ 20 Vdc, 1.0 A | 3 | | Line Regulation | Regline |  | 0.8 | 10 | mV | 8.0 Vdc ≤ Vin ≤ 12 Vdc | 3 | | Load Regulation | Regload |  | 1.3 | 25 | mV | 5.0 mA ≤ IO ≤ 1.0 A | 3 |@@ -36,18 +36,18 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Quiescent Current Change | IB |  | 0.3 | 1 | mA | 7.0 Vdc ≤ Vin ≤ 25 Vdc | 3 | | Quiescent Current Change | IB |  | 0.08 | 0.8 | mA | 5.0 mA ≤ IO ≤ 1.0 A (TA = 25°C) | 3 | | Ripple Rejection | RR | 62 | 83 |  | dB | 8.0 Vdc ≤ Vin ≤ 18 Vdc, f = 120 Hz | 3 |-| Dropout Voltage | VI − VO |  | 2 |  | Vdc | IO = 1.0 A, TJ = 25°C | 3 |-| Output Noise Voltage | Vn |  | 10 |  | V/VO | TA = 25°C, 10 Hz ≤ f ≤ 100 kHz | 3 |-| Output Resistance | rO |  | 0.9 |  | m | f = 1.0 kHz | 3 |-| Short Circuit Current Limit | ISC |  | 0.6 |  | A | TA = 25°C, Vin = 35 Vdc | 3 |-| Peak Output Current | Imax |  | 2.2 |  | A | TJ = 25°C | 3 |-| Average Temperature Coefficient of Output Voltage | TCVO |  | -0.3 |  | mV/°C |  | 3 |-| Input Voltage (5.0 − 18 V output) | VI |  |  | 35 | Vdc | Input Voltage (5.0 − 18 V) | 1 |+| Input Voltage | VI |  |  | 35 | Vdc | Input Voltage (5.0 − 18 V) | 1 | | Storage Junction Temperature Range | Tstg | -65 |  | 150 | °C |  | 1 | | Operating Junction Temperature | TJ |  |  | 150 | °C |  | 1 |-| Thermal Resistance, Junction-to-Ambient (TO-220, case 221A) | RJA |  | 65 |  | °C/W | Case 221A (TO-220) column | 1 |-| Thermal Resistance, Junction-to-Case (TO-220, case 221A) | RJC |  | 5 |  | °C/W | Case 221A (TO-220) column | 1 |-| Operating Temperature Range (MC7805CTG) | TJ | 0 |  | 125 | °C | MC7805CTG ordering entry: TJ = 0°C to +125°C | 22 |+| Operating Junction Temperature Range (MC7805CTG, TO-220) | TJ | 0 |  | 125 | °C | Per ordering information for MC7805CTG (TO-220) | 22 |+| Thermal Resistance, Junction-to-Ambient (TO-220, case 221A) | RJA |  | 65 |  | °C/W | Case 221A (TO-220) | 1 |+| Thermal Resistance, Junction-to-Case (TO-220, case 221A) | RJC |  | 5 |  | °C/W | Case 221A (TO-220) | 1 |+| Dropout Voltage (IO = 1.0 A, TJ = 25°C) | VI − VO |  | 2 |  | Vdc | IO = 1.0 A, TJ = 25°C | 3 |+| Output Noise Voltage (TA = 25°C) | Vn |  | 10 |  | V/VO | 10 Hz ≤ f ≤ 100 kHz | 3 |+| Output Resistance | rO |  | 0.9 |  | mΩ | f = 1.0 kHz | 3 |+| Short Circuit Current Limit (TA = 25°C) | ISC |  | 0.6 |  | A | Vin = 35 Vdc | 3 |+| Peak Output Current (TJ = 25°C) | Imax |  | 2.2 |  | A | TJ = 25°C | 3 |+| Average Temperature Coefficient of Output Voltage | TCVO |  | -0.3 |  | mV/°C |  | 3 |  ## CAD (KiCad official) @@ -60,7 +60,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mc7805ct-d.pdf) (29 pp, sha256 `b04c526d55e5a343`, retrieved 2026-11-10, tier: manufacturer)+- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mc7800-d.pdf) (29 pp, sha256 `0d716b89ee95cd63`, retrieved 2026-11-11, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
docs/mc7805ctg-datasheet.pdf+1−1
@@ -48543,7 +48543,7 @@ trailer << /Root 1 0 R /Info 6 0 R-/ID [<985CE07D8C6BEF65E4E5A6B6F3DEBF6C> <985CE07D8C6BEF65E4E5A6B6F3DEBF6C>]+/ID [<6EA05B966DB1BF2936B3F038EA12D0AF> <6EA05B966DB1BF2936B3F038EA12D0AF>] /Size 795 >> startxref
mc7805ctg-hero.glb
⋯ 1 unchanged line ⋯
mc7805ctg-hero.overlay.json+11−11
@@ -88,28 +88,28 @@   {    "pad": "1",    "text": "Input",-   "x": 0.0,-   "y": 1.57,+   "x": -2.002,+   "y": 0.0,    "align": "right",-   "vertical": true,+   "vertical": false,    "h": 0.6   },   {    "pad": "2",    "text": "Ground",-   "x": 2.54,-   "y": 1.57,-   "align": "right",-   "vertical": true,+   "x": 3.643,+   "y": 0.0,+   "align": "left",+   "vertical": false,    "h": 0.6   },   {    "pad": "3",    "text": "Output",-   "x": 5.08,-   "y": 1.57,-   "align": "right",-   "vertical": true,+   "x": 6.183,+   "y": 0.0,+   "align": "left",+   "vertical": false,    "h": 0.6   }  ],
mc7805ctg.lbr+14−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>onsemi Linear Voltage Regulators (LDO), TO-220. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="TO-220-3_Vertical">   <description>3 pads, 7.0 x 2.0 mm. TO-220-3, Vertical, RM 2.54mm, see</description>@@ -77,6 +77,7 @@ </packages> <symbols> <symbol name="MC7805CTG">+  <description>onsemi Linear Voltage Regulators (LDO), TO-220. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>   <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>@@ -90,7 +91,7 @@ </symbols> <devicesets> <deviceset name="MC7805CTG" prefix="U">-  <description></description>+  <description>onsemi Linear Voltage Regulators (LDO), TO-220. Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="MC7805CTG" x="0" y="0"/>   </gates>@@ -101,7 +102,17 @@         <connect gate="G$1" pin="Ground" pad="2"/>         <connect gate="G$1" pin="Output" pad="3"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="MC7805CTG" constant="no"/>+          <attribute name="MANUFACTURER" value="onsemi" constant="no"/>+          <attribute name="DATASHEET" value="https://www.onsemi.com/pdf/datasheet/mc7805ct-d.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/mc7805ctg" constant="no"/>+          <attribute name="MOUSER_PN" value="863-MC7805CTG" constant="no"/>+          <attribute name="DIGIKEY_PN" value="MC7805CTGOS-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C22456" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>
package.json+16−17
@@ -1,6 +1,6 @@ {   "slug": "mc7805ctg",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",   "description": "onsemi Linear Voltage Regulators (LDO), TO-220. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -29,8 +29,7 @@     "viewers/footprint.html",     "mc7805ctg-hero.glb",     "mc7805ctg-hero.overlay.json",-    "mc7805ctg-etched.glb",-    "mc7805ctg-etched.step"+    "mc7805ctg-etched.glb"   ],   "component": {     "mpn": "MC7805CTG",@@ -39,7 +38,7 @@     "pin_count": 3,     "category": "Power Management ICs",     "subcategory": "Linear Voltage Regulators (LDO)",-    "datasheet": "https://www.onsemi.com/pdf/datasheet/mc7805ct-d.pdf",+    "datasheet": "https://www.onsemi.com/pdf/datasheet/mc7800-d.pdf",     "parts": {       "symbol": "mc7805ctg.kicad_sym",       "footprint": "mc7805ctg.kicad_mod",@@ -55,7 +54,7 @@       "mouser": "863-MC7805CTG"     },     "distributor_check": {-      "checked_at": "2026-11-10T07:42:56Z",+      "checked_at": "2026-11-11T00:09:04Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "MC7805CTGOS-ND",@@ -71,19 +70,19 @@         "number": "1",         "name": "Input",         "type": "power_in",-        "description": "The input voltage must remain typically 2.0 V above the output voltage even during the low point on the input ripple voltage."+        "description": "Unregulated input voltage; it must remain typically 2.0 V above the output voltage even during the low point of the input ripple voltage."       },       {         "number": "2",         "name": "Ground",         "type": "power_in",-        "description": "A common ground is required between the input and the output voltages, and the heatsink surface is connected to this pin."+        "description": "Common ground, which must be shared between input and output voltages; the heatsink surface is connected to this pin."       },       {         "number": "3",         "name": "Output",         "type": "power_out",-        "description": "The regulated output; an output capacitor CO improves transient response, and values of less than 0.1 µF could cause instability."+        "description": "Regulated 5.0 V output (MC7805C), specified from 4.75 V to 5.25 V over 5.0 mA ≤ IO ≤ 1.0 A and PD ≤ 15 W."       }     ],     "provenance": {@@ -97,16 +96,16 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The TO-220-3 package has no terminal 4; the heatsink tab is connected internally to Pin 2 (Ground), "+          "extractor flagged: MC7805CTG is listed in the ordering table (page 22) as a TO-220 (Pb-free), 50 units/rail, TJ = 0°C t; Package case number is inconsistent in the datasheet: the TO-220 T suffix is CASE 221A on pages 1, 2; The maximum input voltage in the Maximum Ratings table (page 1) is garbled in the extracted text ('I"         ],-        "pages_sent": 11,-        "cost_usd": 0.1377,-        "at": "2026-11-10T07:42:50"+        "pages_sent": 29,+        "cost_usd": 0.1448,+        "at": "2026-11-11T00:08:57"       },       "datasheet": {-        "url": "https://www.onsemi.com/pdf/datasheet/mc7805ct-d.pdf",+        "url": "https://www.onsemi.com/pdf/datasheet/mc7800-d.pdf",         "pages": 29,-        "sha256": "b04c526d55e5a343",+        "sha256": "0d716b89ee95cd63",         "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",@@ -138,7 +137,7 @@         "centre_offset_mm": 0.932,         "footprint_binding": "identity",         "sha256": "7cb065d935df5771f0ba6e48ddd180863a121af76483dad7f18e667a7b68204a",-        "checked": "2026-11-10",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -156,8 +155,8 @@         "zmin_mm": -9.75,         "centre_offset_mm": 0.932,         "footprint_binding": "identity",-        "sha256": "145cc0c3c3ae1bdf5474bd37d715654c87690c66c3e9cede4563761b24f774b6",-        "checked": "2026-11-10",+        "sha256": "087045b54faf1fa2b4896cdb88405ca0223246f97367386f9d5638340789c888",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]
page.json+16−17
@@ -4,7 +4,7 @@   "slug": "mc7805ctg",   "title": "MC7805CTG",   "brief": "onsemi Linear Voltage Regulators (LDO), TO-220. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.1",+  "version": "0.1.2",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -20,7 +20,7 @@     "pin_count": 3,     "category": "Power Management ICs",     "subcategory": "Linear Voltage Regulators (LDO)",-    "datasheet": "https://www.onsemi.com/pdf/datasheet/mc7805ct-d.pdf",+    "datasheet": "https://www.onsemi.com/pdf/datasheet/mc7800-d.pdf",     "parts": {       "symbol": "mc7805ctg.kicad_sym",       "footprint": "mc7805ctg.kicad_mod",@@ -36,7 +36,7 @@       "mouser": "863-MC7805CTG"     },     "distributor_check": {-      "checked_at": "2026-11-10T07:42:56Z",+      "checked_at": "2026-11-11T00:09:04Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "MC7805CTGOS-ND",@@ -52,19 +52,19 @@         "number": "1",         "name": "Input",         "type": "power_in",-        "description": "The input voltage must remain typically 2.0 V above the output voltage even during the low point on the input ripple voltage."+        "description": "Unregulated input voltage; it must remain typically 2.0 V above the output voltage even during the low point of the input ripple voltage."       },       {         "number": "2",         "name": "Ground",         "type": "power_in",-        "description": "A common ground is required between the input and the output voltages, and the heatsink surface is connected to this pin."+        "description": "Common ground, which must be shared between input and output voltages; the heatsink surface is connected to this pin."       },       {         "number": "3",         "name": "Output",         "type": "power_out",-        "description": "The regulated output; an output capacitor CO improves transient response, and values of less than 0.1 µF could cause instability."+        "description": "Regulated 5.0 V output (MC7805C), specified from 4.75 V to 5.25 V over 5.0 mA ≤ IO ≤ 1.0 A and PD ≤ 15 W."       }     ],     "provenance": {@@ -78,16 +78,16 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The TO-220-3 package has no terminal 4; the heatsink tab is connected internally to Pin 2 (Ground), "+          "extractor flagged: MC7805CTG is listed in the ordering table (page 22) as a TO-220 (Pb-free), 50 units/rail, TJ = 0°C t; Package case number is inconsistent in the datasheet: the TO-220 T suffix is CASE 221A on pages 1, 2; The maximum input voltage in the Maximum Ratings table (page 1) is garbled in the extracted text ('I"         ],-        "pages_sent": 11,-        "cost_usd": 0.1377,-        "at": "2026-11-10T07:42:50"+        "pages_sent": 29,+        "cost_usd": 0.1448,+        "at": "2026-11-11T00:08:57"       },       "datasheet": {-        "url": "https://www.onsemi.com/pdf/datasheet/mc7805ct-d.pdf",+        "url": "https://www.onsemi.com/pdf/datasheet/mc7800-d.pdf",         "pages": 29,-        "sha256": "b04c526d55e5a343",+        "sha256": "0d716b89ee95cd63",         "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",@@ -119,7 +119,7 @@         "centre_offset_mm": 0.932,         "footprint_binding": "identity",         "sha256": "7cb065d935df5771f0ba6e48ddd180863a121af76483dad7f18e667a7b68204a",-        "checked": "2026-11-10",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -137,8 +137,8 @@         "zmin_mm": -9.75,         "centre_offset_mm": 0.932,         "footprint_binding": "identity",-        "sha256": "145cc0c3c3ae1bdf5474bd37d715654c87690c66c3e9cede4563761b24f774b6",-        "checked": "2026-11-10",+        "sha256": "087045b54faf1fa2b4896cdb88405ca0223246f97367386f9d5638340789c888",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]@@ -445,8 +445,7 @@     "viewers/footprint.html",     "mc7805ctg-hero.glb",     "mc7805ctg-hero.overlay.json",-    "mc7805ctg-etched.glb",-    "mc7805ctg-etched.step"+    "mc7805ctg-etched.glb"   ],   "visibility": {     "public": true