← Commit history
README.md+12−27
@@ -8,9 +8,9 @@ MC7805ABD2TR4G from onsemi, in a TO-263-2. Pinout and pin descriptions extracted  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | Input | power_in | The input voltage must remain typically 2.0 V above the output voltage even during the low point on the input ripple voltage. |-| 2 | Ground | power_in | A common ground is required between the input and the output voltages, and the heatsink surface is connected to this pin. |-| 3 | Output | power_out | Regulated 5.0 V output; output capacitor values of less than 0.1 µF could cause instability. |+| 1 | Input | power_in | Unregulated input supply; the input must remain typically 2.0 V above the output voltage even at the low point of the input ripple, and the Maximum Ratings table lists input voltage up to 35 Vdc for the 5.0 V device. |+| 2 | Ground | power_in | Common ground that must be shared between input and output; the heatsink surface (terminal 4 in the case outline drawing) is connected to this pin. |+| 3 | Output | power_out | Regulated 5.0 V output; for the MC7805AB the output is 4.9 to 5.1 V at TJ = 25°C and 4.8 to 5.2 V over 5.0 mA ≤ IO ≤ 1.0 A and PD ≤ 15 W. |  ## Key specifications @@ -27,31 +27,16 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Input Voltage (5.0 - 18 V) | VI |  |  | 35 | Vdc | Maximum Ratings row for 5.0-18 V output devices | 1 |-| Storage Junction Temperature Range | Tstg | -65 |  | 150 | °C |  | 1 |-| Operating Junction Temperature | TJ |  |  | 150 | °C |  | 1 |-| Operating Junction Temperature Range (ordering table) | TJ | -40 |  | 125 | °C | MC7805ABD2TR4G operating temperature range per ordering table | 21 |-| Output Voltage (TJ = 25°C) | VO | 4.9 | 5 | 5.1 | Vdc | TJ = 25°C | 4 |-| Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) | VO | 4.8 | 5 | 5.2 | Vdc | 5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W, 7.5 Vdc ≤ Vin ≤ 20 Vdc | 4 |-| Line Regulation | Regline |  | 0.5 | 10 | mV | 7.5 Vdc ≤ Vin ≤ 25 Vdc, IO = 500 mA | 4 |-| Line Regulation | Regline |  | 0.8 | 12 | mV | 8.0 Vdc ≤ Vin ≤ 12 Vdc, IO = 1.0 A | 4 |-| Line Regulation | Regline |  | 1.3 | 4 | mV | 8.0 Vdc ≤ Vin ≤ 12 Vdc, IO = 1.0 A, TJ = 25°C | 4 |-| Line Regulation | Regline |  | 4.5 | 10 | mV | 7.3 Vdc ≤ Vin ≤ 20 Vdc, IO = 1.0 A, TJ = 25°C | 4 |-| Load Regulation | Regload |  | 1.3 | 25 | mV | 5.0 mA ≤ IO ≤ 1.5 A, TJ = 25°C | 4 |-| Load Regulation | Regload |  | 0.8 | 25 | mV | 5.0 mA ≤ IO ≤ 1.0 A | 4 |-| Load Regulation | Regload |  | 0.53 | 15 | mV | 250 mA ≤ IO ≤ 750 mA | 4 |+| Output Voltage (TJ = 25°C) | VO | 4.9 | 5 | 5.1 | Vdc |  | 4 |+| Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) | VO | 4.8 | 5 | 5.2 | Vdc | 5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W; 7.5 Vdc ≤ Vin ≤ 20 Vdc | 4 | | Quiescent Current | IB |  | 3.2 | 6 | mA |  | 4 |-| Quiescent Current Change | IB |  | 0.3 | 0.8 | mA | 8.0 Vdc ≤ Vin ≤ 25 Vdc, IO = 500 mA | 4 |-| Quiescent Current Change | IB |  |  | 0.8 | mA | 7.5 Vdc ≤ Vin ≤ 20 Vdc, TJ = 25°C | 4 |-| Quiescent Current Change | IB |  | 0.08 | 0.5 | mA | 5.0 mA ≤ IO ≤ 1.0 A | 4 |+| Load Regulation | Regload |  | 1.3 | 25 | mV | 5.0 mA ≤ IO ≤ 1.5 A, TJ = 25°C | 4 | | Ripple Rejection | RR | 68 | 83 |  | dB | 8.0 Vdc ≤ Vin ≤ 18 Vdc, f = 120 Hz, IO = 500 mA | 4 |-| Junction-to-Case Thermal Resistance (D2PAK, case 936) | RJC |  | 5 |  | °C/W | D2PAK column (case 936) of Maximum Ratings table | 1 |-| Dropout Voltage | VI − VO |  | 2 |  | Vdc | IO = 1.0 A, TJ = 25°C | 4 |-| Output Noise Voltage | Vn |  | 10 |  | V/VO | TA = 25°C, 10 Hz ≤ f ≤ 100 kHz | 4 |-| Output Resistance | rO |  | 0.9 |  | m | f = 1.0 kHz | 4 |-| Short Circuit Current Limit | ISC |  | 0.2 |  | A | TA = 25°C, Vin = 35 Vdc | 4 |-| Peak Output Current | Imax |  | 2.2 |  | A | TJ = 25°C | 4 |-| Average Temperature Coefficient of Output Voltage | TCVO |  | -0.3 |  | mV/°C |  | 4 |+| Input Voltage (5.0 - 18 V) | VI |  |  | 35 | Vdc | Input Voltage (5.0 - 18 V) row of Maximum Ratings | 1 |+| Storage Junction Temperature Range | Tstg | -65 |  | 150 | °C |  | 1 |+| Operating Junction Temperature | TJ |  |  | 150 | °C |  | 1 |+| Operating Junction Temperature Range (ordering) | TJ | -40 |  | 125 | °C | MC7805ABD2TR4G | 21 |+| Thermal Resistance, Junction-to-Case | RJC |  | 5 |  | °C/W | D2PAK (case 936) column | 1 |  ## CAD (KiCad official) @@ -64,7 +49,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mc7805abd2tr4-d.pdf) (29 pp, sha256 `b04c526d55e5a343`, retrieved 2026-11-10, tier: manufacturer)+- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mc7800-d.pdf) (29 pp, sha256 `0d716b89ee95cd63`, retrieved 2026-11-11, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
docs/mc7805abd2tr4g-datasheet.pdf+1−1
@@ -48543,7 +48543,7 @@ trailer << /Root 1 0 R /Info 6 0 R-/ID [<985CE07D8C6BEF65E4E5A6B6F3DEBF6C> <985CE07D8C6BEF65E4E5A6B6F3DEBF6C>]+/ID [<6EA05B966DB1BF2936B3F038EA12D0AF> <6EA05B966DB1BF2936B3F038EA12D0AF>] /Size 795 >> startxref
mc7805abd2tr4g-hero.overlay.json+148−146
@@ -1,150 +1,152 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "MC7805ABD2TR4G",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 3,-      "span_mm": 18.55,-      "dash_mm": 0.45,-      "gap_mm": 0.27,-      "pad_stroke_mm": 0.09-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 5,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 3,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }+ "spec": "adom-hero 1.4",+ "mpn": "MC7805ABD2TR4G",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 3,+   "span_mm": 18.55,+   "dash_mm": 0.45,+   "gap_mm": 0.27,+   "pad_stroke_mm": 0.09   },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 1.292,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -9.375,-      5.625,-      -5.0,-      5.0-    ],-    "pads_bbox_mm": [-      -9.95,-      6.2,-      -5.4,-      5.4-    ],-    "seating_z_mm": 0.0+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 5,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }   },-  "sources": {-    "glb": "mc7805abd2tr4g-etched.glb",-    "glb_sha256": "683dbdf012315c9534e698d7fa9ca97af3efa3c75f603c2cce92419bd7466854",-    "footprint": "mc7805abd2tr4g.kicad_mod",-    "footprint_sha256": "7e42bcd10536c7103c23ea8646184986875d5ff9fdb149deb902fc9653bd6793",-    "pins": "page.json component.pins",-    "pins_sha256": "717911aa20993a09f60bf53bc3a5cb63f5209a1b3ca6cdd8813155bbfa2e8998"-  },-  "generator": "adom-wiki 1.8.15 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "Input",-      "x": -10.1,-      "y": -2.54,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "2",-      "text": "Ground",-      "x": 6.35,-      "y": 0.0,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "3",-      "text": "Output",-      "x": -10.1,-      "y": 2.54,-      "align": "right",-      "vertical": false,-      "h": 0.6-    }+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 3,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "centre_offset_mm": 0.0,+  "over_pads": false,+  "tolerance_mm": 1.292,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -9.375,+   5.625,+   -5.0,+   5.0+  ],+  "pads_bbox_mm": [+   -9.95,+   6.2,+   -5.4,+   5.4   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -7.65,-        -2.54-      ],-      "size_mm": [-        4.6,-        1.1-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        1.5,-        0.0-      ],-      "size_mm": [-        9.4,-        10.8-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -7.65,-        2.54-      ],-      "size_mm": [-        4.6,-        1.1-      ],-      "rot": 0.0-    }-  ]-}+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "mc7805abd2tr4g-etched.glb",+  "glb_sha256": "683dbdf012315c9534e698d7fa9ca97af3efa3c75f603c2cce92419bd7466854",+  "footprint": "mc7805abd2tr4g.kicad_mod",+  "footprint_sha256": "7e42bcd10536c7103c23ea8646184986875d5ff9fdb149deb902fc9653bd6793",+  "pins": "page.json component.pins",+  "pins_sha256": "717911aa20993a09f60bf53bc3a5cb63f5209a1b3ca6cdd8813155bbfa2e8998"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "Input",+   "x": -10.1,+   "y": -2.54,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "Ground",+   "x": 6.35,+   "y": 0.0,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "Output",+   "x": -10.1,+   "y": 2.54,+   "align": "right",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    -2.54+   ],+   "size_mm": [+    4.6,+    1.1+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    1.5,+    0.0+   ],+   "size_mm": [+    9.4,+    10.8+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    2.54+   ],+   "size_mm": [+    4.6,+    1.1+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
mc7805abd2tr4g.lbr+14−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>onsemi Linear Voltage Regulators (LDO), TO-263-2. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="TO-263-2">   <description>3 pads, 16.1 x 10.8 mm. TO-263/D2PAK/DDPAK SMD package</description>@@ -88,6 +88,7 @@ </packages> <symbols> <symbol name="MC7805ABD2TR4G">+  <description>onsemi Linear Voltage Regulators (LDO), TO-263-2. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>   <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>@@ -101,7 +102,7 @@ </symbols> <devicesets> <deviceset name="MC7805ABD2TR4G" prefix="U">-  <description></description>+  <description>onsemi Linear Voltage Regulators (LDO), TO-263-2. Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="MC7805ABD2TR4G" x="0" y="0"/>   </gates>@@ -112,7 +113,17 @@         <connect gate="G$1" pin="Ground" pad="2"/>         <connect gate="G$1" pin="Output" pad="3"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="MC7805ABD2TR4G" constant="no"/>+          <attribute name="MANUFACTURER" value="onsemi" constant="no"/>+          <attribute name="DATASHEET" value="https://www.onsemi.com/pdf/datasheet/mc7805abd2tr4-d.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/mc7805abd2tr4g" constant="no"/>+          <attribute name="MOUSER_PN" value="863-MC7805ABD2TR4G" constant="no"/>+          <attribute name="DIGIKEY_PN" value="MC7805ABD2TR4GOSTR-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C152462" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>
package.json+16−57
@@ -1,6 +1,6 @@ {   "slug": "mc7805abd2tr4g",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "onsemi Linear Voltage Regulators (LDO), TO-263-2. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -38,7 +38,7 @@     "pin_count": 3,     "category": "Power Management ICs",     "subcategory": "Linear Voltage Regulators (LDO)",-    "datasheet": "https://www.onsemi.com/pdf/datasheet/mc7805abd2tr4-d.pdf",+    "datasheet": "https://www.onsemi.com/pdf/datasheet/mc7800-d.pdf",     "parts": {       "symbol": "mc7805abd2tr4g.kicad_sym",       "footprint": "mc7805abd2tr4g.kicad_mod",@@ -54,7 +54,7 @@       "mouser": "863-MC7805ABD2TR4G"     },     "distributor_check": {-      "checked_at": "2026-11-10T07:36:41Z",+      "checked_at": "2026-11-11T02:30:10Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "MC7805ABD2TR4GOSTR-ND",@@ -70,19 +70,19 @@         "number": "1",         "name": "Input",         "type": "power_in",-        "description": "The input voltage must remain typically 2.0 V above the output voltage even during the low point on the input ripple voltage."+        "description": "Unregulated input supply; the input must remain typically 2.0 V above the output voltage even at the low point of the input ripple, and the Maximum Ratings table lists input voltage up to 35 Vdc for the 5.0 V device."       },       {         "number": "2",         "name": "Ground",         "type": "power_in",-        "description": "A common ground is required between the input and the output voltages, and the heatsink surface is connected to this pin."+        "description": "Common ground that must be shared between input and output; the heatsink surface (terminal 4 in the case outline drawing) is connected to this pin."       },       {         "number": "3",         "name": "Output",         "type": "power_out",-        "description": "Regulated 5.0 V output; output capacitor values of less than 0.1 µF could cause instability."+        "description": "Regulated 5.0 V output; for the MC7805AB the output is 4.9 to 5.1 V at TJ = 25°C and 4.8 to 5.2 V over 5.0 mA ≤ IO ≤ 1.0 A and PD ≤ 15 W."       }     ],     "provenance": {@@ -96,16 +96,16 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The package hint says TO-263-2, but the datasheet lists this MPN's package as D2PAK-3 (D2T suffix, C; The D2PAK-3 case outline names the heatsink tab as terminal 4, and page 1 states that it is connecte"+          "extractor flagged: The pin assignment (1 Input, 2 Ground, 3 Output, tab tied to pin 2) is printed once for the device f; The Maximum Ratings input-voltage row is garbled in the text extraction. It reads 'Input Voltage (5."         ],-        "pages_sent": 11,-        "cost_usd": 0.137,-        "at": "2026-11-10T07:36:34"+        "pages_sent": 29,+        "cost_usd": 0.1453,+        "at": "2026-11-11T02:29:56"       },       "datasheet": {-        "url": "https://www.onsemi.com/pdf/datasheet/mc7805abd2tr4-d.pdf",+        "url": "https://www.onsemi.com/pdf/datasheet/mc7800-d.pdf",         "pages": 29,-        "sha256": "b04c526d55e5a343",+        "sha256": "0d716b89ee95cd63",         "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",@@ -137,7 +137,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "804a3f76e4182a02567b2429bdc9a585b857158fb8543fccd29c8eb6780e1310",-        "checked": "2026-11-10",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -155,51 +155,10 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "724288705664d33f60b5e4479cff81b7c69d7a4b4c9cfc896a2874f0d91e9d74",-        "checked": "2026-11-10",+        "sha256": "19bc10e550c30ec0fe0c5fd09a76784a287c5a6102d500fbfd0c6927adf05238",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }-    ],-    "package_dims": {-      "package_code": "D2PAK (CASE 936-03)",-      "source_page": 28,-      "D": {-        "nom_mm": 10.02,-        "range_mm": [-          9.804,-          10.236-        ]-      },-      "E1": {-        "nom_mm": 9.194,-        "range_mm": [-          9.042,-          9.347-        ]-      },-      "e": {-        "nom_mm": 2.54,-        "range_mm": [-          null,-          null-        ]-      },-      "A": {-        "nom_mm": 4.445,-        "range_mm": [-          4.318,-          4.572-        ]-      },-      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",-      "model_check": {-        "file": "mc7805abd2tr4g.step",-        "verdict": "PASS",-        "reasons": [-          "height within the datasheet's package drawing"-        ],-        "by": "factory/package_fit.py"-      }-    }+    ]   } }
page.json+19−58
@@ -4,7 +4,7 @@   "slug": "mc7805abd2tr4g",   "title": "MC7805ABD2TR4G",   "brief": "onsemi Linear Voltage Regulators (LDO), TO-263-2. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -20,7 +20,7 @@     "pin_count": 3,     "category": "Power Management ICs",     "subcategory": "Linear Voltage Regulators (LDO)",-    "datasheet": "https://www.onsemi.com/pdf/datasheet/mc7805abd2tr4-d.pdf",+    "datasheet": "https://www.onsemi.com/pdf/datasheet/mc7800-d.pdf",     "parts": {       "symbol": "mc7805abd2tr4g.kicad_sym",       "footprint": "mc7805abd2tr4g.kicad_mod",@@ -36,7 +36,7 @@       "mouser": "863-MC7805ABD2TR4G"     },     "distributor_check": {-      "checked_at": "2026-11-10T07:36:41Z",+      "checked_at": "2026-11-11T02:30:10Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "MC7805ABD2TR4GOSTR-ND",@@ -52,19 +52,19 @@         "number": "1",         "name": "Input",         "type": "power_in",-        "description": "The input voltage must remain typically 2.0 V above the output voltage even during the low point on the input ripple voltage."+        "description": "Unregulated input supply; the input must remain typically 2.0 V above the output voltage even at the low point of the input ripple, and the Maximum Ratings table lists input voltage up to 35 Vdc for the 5.0 V device."       },       {         "number": "2",         "name": "Ground",         "type": "power_in",-        "description": "A common ground is required between the input and the output voltages, and the heatsink surface is connected to this pin."+        "description": "Common ground that must be shared between input and output; the heatsink surface (terminal 4 in the case outline drawing) is connected to this pin."       },       {         "number": "3",         "name": "Output",         "type": "power_out",-        "description": "Regulated 5.0 V output; output capacitor values of less than 0.1 µF could cause instability."+        "description": "Regulated 5.0 V output; for the MC7805AB the output is 4.9 to 5.1 V at TJ = 25°C and 4.8 to 5.2 V over 5.0 mA ≤ IO ≤ 1.0 A and PD ≤ 15 W."       }     ],     "provenance": {@@ -78,16 +78,16 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The package hint says TO-263-2, but the datasheet lists this MPN's package as D2PAK-3 (D2T suffix, C; The D2PAK-3 case outline names the heatsink tab as terminal 4, and page 1 states that it is connecte"+          "extractor flagged: The pin assignment (1 Input, 2 Ground, 3 Output, tab tied to pin 2) is printed once for the device f; The Maximum Ratings input-voltage row is garbled in the text extraction. It reads 'Input Voltage (5."         ],-        "pages_sent": 11,-        "cost_usd": 0.137,-        "at": "2026-11-10T07:36:34"+        "pages_sent": 29,+        "cost_usd": 0.1453,+        "at": "2026-11-11T02:29:56"       },       "datasheet": {-        "url": "https://www.onsemi.com/pdf/datasheet/mc7805abd2tr4-d.pdf",+        "url": "https://www.onsemi.com/pdf/datasheet/mc7800-d.pdf",         "pages": 29,-        "sha256": "b04c526d55e5a343",+        "sha256": "0d716b89ee95cd63",         "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",@@ -119,7 +119,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "804a3f76e4182a02567b2429bdc9a585b857158fb8543fccd29c8eb6780e1310",-        "checked": "2026-11-10",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -137,52 +137,11 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "724288705664d33f60b5e4479cff81b7c69d7a4b4c9cfc896a2874f0d91e9d74",-        "checked": "2026-11-10",+        "sha256": "19bc10e550c30ec0fe0c5fd09a76784a287c5a6102d500fbfd0c6927adf05238",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }-    ],-    "package_dims": {-      "package_code": "D2PAK (CASE 936-03)",-      "source_page": 28,-      "D": {-        "nom_mm": 10.02,-        "range_mm": [-          9.804,-          10.236-        ]-      },-      "E1": {-        "nom_mm": 9.194,-        "range_mm": [-          9.042,-          9.347-        ]-      },-      "e": {-        "nom_mm": 2.54,-        "range_mm": [-          null,-          null-        ]-      },-      "A": {-        "nom_mm": 4.445,-        "range_mm": [-          4.318,-          4.572-        ]-      },-      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",-      "model_check": {-        "file": "mc7805abd2tr4g.step",-        "verdict": "PASS",-        "reasons": [-          "height within the datasheet's package drawing"-        ],-        "by": "factory/package_fit.py"-      }-    }+    ]   },   "metadata": {     "specs": {@@ -538,5 +497,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "onsemi Linear Voltage Regulators (LDO), TO-263-2. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file