← Commit history
README.md+48−58@@ -2,32 +2,32 @@ **onsemi** · Buffer/Driver/Transceiver · SOIC-20-300mil -MC74LVX541DWG from onsemi, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+MC74LVX541DWG from onsemi, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD. ## Pinout | Pin | Name | Type | Function | |---|---|---|---|-| 1 | OE1 | input | Output enable input; when either OE1 or OE2 is high, the terminal outputs are in the high impedance state. |-| 2 | A1 | input | Data input to buffer 1; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC. |-| 3 | A2 | input | Data input to buffer 2; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC. |-| 4 | A3 | input | Data input to buffer 3; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC. |-| 5 | A4 | input | Data input to buffer 4; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC. |-| 6 | A5 | input | Data input to buffer 5; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC. |-| 7 | A6 | input | Data input to buffer 6; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC. |-| 8 | A7 | input | Data input to buffer 7; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC. |-| 9 | A8 | input | Data input to buffer 8; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC. |-| 10 | GND | power_in | Ground reference pin for the device. |-| 11 | Y8 | tri_state | Noninverting three-state buffer output 8; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open. |-| 12 | Y7 | tri_state | Noninverting three-state buffer output 7; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open. |-| 13 | Y6 | tri_state | Noninverting three-state buffer output 6; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open. |-| 14 | Y5 | tri_state | Noninverting three-state buffer output 5; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open. |-| 15 | Y4 | tri_state | Noninverting three-state buffer output 4; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open. |-| 16 | Y3 | tri_state | Noninverting three-state buffer output 3; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open. |-| 17 | Y2 | tri_state | Noninverting three-state buffer output 2; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open. |-| 18 | Y1 | tri_state | Noninverting three-state buffer output 1; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open. |-| 19 | OE2 | input | Output enable input; when either OE1 or OE2 is high, the terminal outputs are in the high impedance state. |-| 20 | VCC | power_in | Positive supply; the recommended DC supply range is 2.0 V to 3.6 V, with absolute maximum 7.0 V. |+| 1 | OE1 | input | Output enable, active low: when OE1 or OE2 is high, the terminal outputs go to the high-impedance state. |+| 2 | A1 | input | Data input to noninverting buffer 1; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V. |+| 3 | A2 | input | Data input to noninverting buffer 2; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V. |+| 4 | A3 | input | Data input to noninverting buffer 3; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V. |+| 5 | A4 | input | Data input to noninverting buffer 4; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V. |+| 6 | A5 | input | Data input to noninverting buffer 5; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V. |+| 7 | A6 | input | Data input to noninverting buffer 6; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V. |+| 8 | A7 | input | Data input to noninverting buffer 7; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V. |+| 9 | A8 | input | Data input to noninverting buffer 8; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V. |+| 10 | GND | power_in | Ground reference for the device; Vin and Vout must stay within GND to VCC. |+| 11 | Y8 | tri_state | Noninverting three-state output 8; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin. |+| 12 | Y7 | tri_state | Noninverting three-state output 7; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin. |+| 13 | Y6 | tri_state | Noninverting three-state output 6; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin. |+| 14 | Y5 | tri_state | Noninverting three-state output 5; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin. |+| 15 | Y4 | tri_state | Noninverting three-state output 4; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin. |+| 16 | Y3 | tri_state | Noninverting three-state output 3; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin. |+| 17 | Y2 | tri_state | Noninverting three-state output 2; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin. |+| 18 | Y1 | tri_state | Noninverting three-state output 1; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin. |+| 19 | OE2 | input | Output enable: when OE2 or OE1 is high, the terminal outputs go to the high-impedance state. |+| 20 | VCC | power_in | Positive supply; recommended operating range 2.0 V to 3.6 V, absolute maximum 7.0 V. | ## Key specifications @@ -46,7 +46,6 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries |---|---|---|---|---|---|---|---| | DC Supply Voltage | VCC | 2 | | 3.6 | V | | 2 | | DC Input Voltage | Vin | 0 | | 5.5 | V | | 2 |-| DC Output Voltage | Vout | 0 | | | V | | 2 | | Operating Temperature, All Package Types | TA | -40 | | 85 | °C | | 2 | | Input Rise and Fall Time | tr, tf | 0 | | 100 | ns/V | VCC = 3.3 V ± 0.3 V | 2 | | DC Supply Voltage | VCC | -0.5 | | 7 | V | | 2 |@@ -56,47 +55,38 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Output Diode Current | IOK | -20 | | 20 | mA | | 2 | | DC Output Current, per Pin | Iout | -25 | | 25 | mA | | 2 | | DC Supply Current, VCC and GND Pins | ICC | -50 | | 50 | mA | | 2 |-| Power Dissipation in Still Air, SOIC Packages | PD | | | 500 | mW | SOIC package, still air | 2 |+| Power Dissipation in Still Air, SOIC Packages | PD | | | 500 | mW | Still air, SOIC package | 2 | | Storage Temperature | Tstg | -65 | | 150 | °C | | 2 |-| Power Dissipation Derating, SOIC Package | | -7 | | | mW/°C | from 65 to 125 °C | 2 | | Minimum High-Level Input Voltage | VIH | 1.5 | | | V | VCC = 2.0 V, TA = −40 to 85°C | 3 | | Minimum High-Level Input Voltage | VIH | 2 | | | V | VCC = 3.0 V, TA = −40 to 85°C | 3 | | Minimum High-Level Input Voltage | VIH | 2.4 | | | V | VCC = 3.6 V, TA = −40 to 85°C | 3 | | Maximum Low-Level Input Voltage | VIL | | | 0.5 | V | VCC = 2.0 V, TA = −40 to 85°C | 3 | | Maximum Low-Level Input Voltage | VIL | | | 0.8 | V | VCC = 3.0 V, TA = −40 to 85°C | 3 |-| Minimum High-Level Output Voltage | VOH | 1.9 | | | V | Vin = VIH or VIL, IOH = −50 µA, VCC = 2.0 V, TA = −40 to 85°C | 3 |-| Minimum High-Level Output Voltage | VOH | 2.9 | | | V | Vin = VIH or VIL, IOH = −50 µA, VCC = 3.0 V, TA = −40 to 85°C | 3 |-| Minimum High-Level Output Voltage | VOH | 2.48 | | | V | Vin = VIH or VIL, IOH = −4 mA, VCC = 3.0 V, TA = −40 to 85°C | 3 |-| Maximum Low-Level Output Voltage | VOL | | | 0.1 | V | Vin = VIH or VIL, IOL = 50 µA, VCC = 2.0 V, TA = −40 to 85°C | 3 |-| Maximum Low-Level Output Voltage | VOL | | | 0.44 | V | Vin = VIH or VIL, IOL = 4 mA, VCC = 3.0 V, TA = −40 to 85°C | 3 |-| Maximum Input Leakage Current | Iin | -1 | | 1 | µA | Vin = 5.5 V or GND, VCC 0 to 3.6 V, TA = −40 to 85°C | 3 |-| Maximum Three-State Leakage Current | IOZ | -2.5 | | 2.5 | µA | Vin = VIL or VIH, Vout = VCC or GND, VCC = 3.6 V, TA = −40 to 85°C | 3 |-| Maximum Quiescent Supply Current | ICC | | | 4 | µA | Vin = VCC or GND, VCC = 3.6 V, TA = 25°C | 3 |-| Maximum Quiescent Supply Current | ICC | | | 40 | µA | Vin = VCC or GND, VCC = 3.6 V, TA = −40 to 85°C | 3 |-| Maximum Propagation Delay, A to Y | tPLH, tPHL | | 5 | 7.5 | ns | VCC = 2.7 V, CL = 15 pF, TA = 25°C | 3 |-| Maximum Propagation Delay, A to Y | tPLH, tPHL | 1 | | 8.5 | ns | VCC = 2.7 V, CL = 15 pF, TA = −40 to 85°C | 3 |-| Maximum Propagation Delay, A to Y | tPLH, tPHL | | 7 | 10.5 | ns | VCC = 2.7 V, CL = 50 pF, TA = 25°C | 3 |-| Maximum Propagation Delay, A to Y | tPLH, tPHL | 1 | | 12 | ns | VCC = 2.7 V, CL = 50 pF, TA = −40 to 85°C | 3 |-| Maximum Propagation Delay, A to Y | tPLH, tPHL | | 3.5 | 5 | ns | VCC = 3.3 ± 0.3 V, CL = 15 pF, TA = 25°C | 3 |-| Maximum Propagation Delay, A to Y | tPLH, tPHL | 1 | | 6 | ns | VCC = 3.3 ± 0.3 V, CL = 15 pF, TA = −40 to 85°C | 3 |-| Maximum Propagation Delay, A to Y | tPLH, tPHL | | 5 | 7 | ns | VCC = 3.3 ± 0.3 V, CL = 50 pF, TA = 25°C | 3 |-| Maximum Propagation Delay, A to Y | tPLH, tPHL | 1 | | 8 | ns | VCC = 3.3 ± 0.3 V, CL = 50 pF, TA = −40 to 85°C | 3 |-| Output Enable Time, OE to Y | tPZL, tPZH | | 6.8 | 9.3 | ns | VCC = 2.7 V, CL = 15 pF, RL = 1 kΩ, TA = 25°C | 3 |-| Output Enable Time, OE to Y | tPZL, tPZH | 1 | | 12.5 | ns | VCC = 2.7 V, CL = 15 pF, RL = 1 kΩ, TA = −40 to 85°C | 3 |-| Output Enable Time, OE to Y | tPZL, tPZH | | 10.5 | 14 | ns | VCC = 2.7 V, CL = 50 pF, RL = 1 kΩ, TA = 25°C | 3 |-| Output Enable Time, OE to Y | tPZL, tPZH | 1 | | 16 | ns | VCC = 2.7 V, CL = 50 pF, RL = 1 kΩ, TA = −40 to 85°C | 3 |-| Output Enable Time, OE to Y | tPZL, tPZH | | 4.7 | 6.2 | ns | VCC = 3.3 ± 0.3 V, CL = 15 pF, RL = 1 kΩ, TA = 25°C | 3 |-| Output Enable Time, OE to Y | tPZL, tPZH | 1 | | 8.5 | ns | VCC = 3.3 ± 0.3 V, CL = 15 pF, RL = 1 kΩ, TA = −40 to 85°C | 3 |-| Output Enable Time, OE to Y | tPZL, tPZH | | 7.2 | 9.2 | ns | VCC = 3.3 ± 0.3 V, CL = 50 pF, RL = 1 kΩ, TA = 25°C | 3 |-| Output Enable Time, OE to Y | tPZL, tPZH | 1 | | 10.5 | ns | VCC = 3.3 ± 0.3 V, CL = 50 pF, RL = 1 kΩ, TA = −40 to 85°C | 3 |-| Output Disable Time, OE to Y | tPLZ, tPHZ | | 11.2 | 15.4 | ns | VCC = 2.7 V, CL = 50 pF, RL = 1 kΩ, TA = 25°C | 3 |-| Output Disable Time, OE to Y | tPLZ, tPHZ | 1 | | 17.5 | ns | VCC = 2.7 V, CL = 50 pF, RL = 1 kΩ, TA = −40 to 85°C | 3 |-| Output Disable Time, OE to Y | tPLZ, tPHZ | | 6 | 8.8 | ns | VCC = 3.3 ± 0.3 V, CL = 50 pF, RL = 1 kΩ, TA = 25°C | 3 |-| Output Disable Time, OE to Y | tPLZ, tPHZ | 1 | | 10 | ns | VCC = 3.3 ± 0.3 V, CL = 50 pF, RL = 1 kΩ, TA = −40 to 85°C | 3 |-| Output to Output Skew | tOSLH, tOSHL | | | 1.5 | ns | VCC = 2.7 V, CL = 50 pF (Note 1) | 3 |-| Output to Output Skew | tOSLH, tOSHL | | | 1 | ns | VCC = 3.3 ± 0.3 V, CL = 50 pF (Note 1) | 3 |-| Maximum Input Capacitance | Cin | | 4 | 10 | pF | | 3 |-| Maximum Three-State Output Capacitance | Cout | | | 6 | pF | Output in high impedance state | 3 |+| Minimum High-Level Output Voltage | VOH | 1.9 | | | V | Vin = VIH or VIL; IOH = −50 µA; VCC = 2.0 V; TA = −40 to 85°C | 3 |+| Minimum High-Level Output Voltage | VOH | 2.9 | | | V | Vin = VIH or VIL; IOH = −50 µA; VCC = 3.0 V; TA = −40 to 85°C | 3 |+| Minimum High-Level Output Voltage | VOH | 2.48 | | | V | Vin = VIH or VIL; IOH = −4 mA; VCC = 3.0 V; TA = −40 to 85°C | 3 |+| Minimum High-Level Output Voltage | VOH | 2.58 | | | V | Vin = VIH or VIL; IOH = −4 mA; VCC = 3.0 V; TA = 25°C | 3 |+| Maximum Low-Level Output Voltage | VOL | | | 0.1 | V | Vin = VIH or VIL; IOL = 50 µA; VCC = 2.0 V; TA = −40 to 85°C | 3 |+| Maximum Low-Level Output Voltage | VOL | | | 0.44 | V | Vin = VIH or VIL; IOL = 4 mA; VCC = 3.0 V; TA = −40 to 85°C | 3 |+| Maximum Low-Level Output Voltage | VOL | | | 0.36 | V | Vin = VIH or VIL; IOL = 4 mA; VCC = 3.0 V; TA = 25°C | 3 |+| Maximum Input Leakage Current | Iin | -1 | | 1 | µA | Vin = 5.5 V or GND; VCC = 0 to 3.6 V; TA = −40 to 85°C | 3 |+| Maximum Three-State Leakage Current | IOZ | -2.5 | | 2.5 | µA | Vin = VIL or VIH; Vout = VCC or GND; VCC = 3.6 V; TA = −40 to 85°C | 3 |+| Maximum Quiescent Supply Current | ICC | | | 40 | µA | Vin = VCC or GND; VCC = 3.6 V; TA = −40 to 85°C | 3 |+| Maximum Quiescent Supply Current | ICC | | | 4 | µA | Vin = VCC or GND; VCC = 3.6 V; TA = 25°C | 3 |+| Maximum Propagation Delay, A to Y | tPLH, tPHL | 1 | | 8.5 | ns | Input tr = tf = 3.0 ns; VCC = 2.7 V; CL = 15 pF; TA = −40 to 85°C | 3 |+| Maximum Propagation Delay, A to Y | tPLH, tPHL | 1 | | 12 | ns | Input tr = tf = 3.0 ns; VCC = 2.7 V; CL = 50 pF; TA = −40 to 85°C | 3 |+| Maximum Propagation Delay, A to Y | tPLH, tPHL | 1 | | 6 | ns | Input tr = tf = 3.0 ns; VCC = 3.3 ± 0.3 V; CL = 15 pF; TA = −40 to 85°C | 3 |+| Maximum Propagation Delay, A to Y | tPLH, tPHL | 1 | | 8 | ns | Input tr = tf = 3.0 ns; VCC = 3.3 ± 0.3 V; CL = 50 pF; TA = −40 to 85°C | 3 |+| Output Enable Time, OE to Y | tPZL, tPZH | 1 | | 12.5 | ns | Input tr = tf = 3.0 ns; VCC = 2.7 V; CL = 15 pF; RL = 1 k; TA = −40 to 85°C | 3 |+| Output Enable Time, OE to Y | tPZL, tPZH | 1 | | 16 | ns | Input tr = tf = 3.0 ns; VCC = 2.7 V; CL = 50 pF; RL = 1 k; TA = −40 to 85°C | 3 |+| Output Enable Time, OE to Y | tPZL, tPZH | 1 | | 8.5 | ns | Input tr = tf = 3.0 ns; VCC = 3.3 ± 0.3 V; CL = 15 pF; RL = 1 k; TA = −40 to 85°C | 3 |+| Output Enable Time, OE to Y | tPZL, tPZH | 1 | | 10.5 | ns | Input tr = tf = 3.0 ns; VCC = 3.3 ± 0.3 V; CL = 50 pF; RL = 1 k; TA = −40 to 85°C | 3 |+| Output Disable Time, OE to Y | tPLZ, tPHZ | 1 | | 17.5 | ns | Input tr = tf = 3.0 ns; VCC = 2.7 V; CL = 50 pF; RL = 1 k; TA = −40 to 85°C | 3 |+| Output Disable Time, OE to Y | tPLZ, tPHZ | 1 | | 10 | ns | Input tr = tf = 3.0 ns; VCC = 3.3 ± 0.3 V; CL = 50 pF; RL = 1 k; TA = −40 to 85°C | 3 |+| Output to Output Skew | tOSLH, tOSHL | | | 1.5 | ns | Input tr = tf = 3.0 ns; VCC = 2.7 V; CL = 50 pF (Note 1) | 3 |+| Output to Output Skew | tOSLH, tOSHL | | | 1 | ns | Input tr = tf = 3.0 ns; VCC = 3.3 ± 0.3 V; CL = 50 pF (Note 1) | 3 |+| Maximum Input Capacitance | Cin | | | 10 | pF | TA = −40 to 85°C | 3 |+| Maximum Three-State Output Capacitance | Cout | | | 6 | pF | Output in High Impedance State | 3 | | Quiet Output Maximum Dynamic VOL | VOLP | | 0.5 | 0.8 | V | Input tr = tf = 3.0 ns, CL = 50 pF, VCC = 3.3 V, TA = 25°C | 4 | | Quiet Output Minimum Dynamic VOL | VOLV | | -0.5 | -0.8 | V | Input tr = tf = 3.0 ns, CL = 50 pF, VCC = 3.3 V, TA = 25°C | 4 | | Minimum High Level Dynamic Input Voltage | VIHD | 2 | | | V | Input tr = tf = 3.0 ns, CL = 50 pF, VCC = 3.3 V, TA = 25°C | 4 |@@ -113,7 +103,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mc74lvx541dw-d.pdf) (7 pp, sha256 `37b33e26f08eb8d4`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mc74lvx541dw-d.pdf) (7 pp, sha256 `37b33e26f08eb8d4`, retrieved 2026-11-13, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
package.json+31−32@@ -1,6 +1,6 @@ { "slug": "mc74lvx541dwg",- "version": "0.1.1",+ "version": "0.1.2", "type": "component", "description": "onsemi Buffer/Driver/Transceiver, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -28,8 +28,7 @@ "viewers/symbol.html", "viewers/footprint.html", "mc74lvx541dwg-hero.glb",- "mc74lvx541dwg-hero.overlay.json",- "mc74lvx541dwg-etched.glb"+ "mc74lvx541dwg-hero.overlay.json" ], "component": { "mpn": "MC74LVX541DWG",@@ -43,7 +42,7 @@ "symbol": "mc74lvx541dwg.kicad_sym", "footprint": "mc74lvx541dwg.kicad_mod", "model_3d": "mc74lvx541dwg-hero.glb",- "model_3d_plain": "mc74lvx541dwg-etched.glb",+ "model_3d_plain": "mc74lvx541dwg.glb", "model_3d_step": "mc74lvx541dwg-etched.step", "model_3d_step_plain": "mc74lvx541dwg.step", "lbr": "mc74lvx541dwg.lbr"@@ -54,7 +53,7 @@ "mouser": "863-MC74LVX541DWG" }, "distributor_check": {- "checked_at": "2026-11-12T08:00:24Z",+ "checked_at": "2026-11-13T01:38:36Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "MC74LVX541DWG-ND",@@ -70,121 +69,121 @@ "number": "1", "name": "OE1", "type": "input",- "description": "Output enable input; when either OE1 or OE2 is high, the terminal outputs are in the high impedance state."+ "description": "Output enable, active low: when OE1 or OE2 is high, the terminal outputs go to the high-impedance state." }, { "number": "2", "name": "A1", "type": "input",- "description": "Data input to buffer 1; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC."+ "description": "Data input to noninverting buffer 1; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V." }, { "number": "3", "name": "A2", "type": "input",- "description": "Data input to buffer 2; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC."+ "description": "Data input to noninverting buffer 2; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V." }, { "number": "4", "name": "A3", "type": "input",- "description": "Data input to buffer 3; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC."+ "description": "Data input to noninverting buffer 3; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V." }, { "number": "5", "name": "A4", "type": "input",- "description": "Data input to buffer 4; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC."+ "description": "Data input to noninverting buffer 4; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V." }, { "number": "6", "name": "A5", "type": "input",- "description": "Data input to buffer 5; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC."+ "description": "Data input to noninverting buffer 5; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V." }, { "number": "7", "name": "A6", "type": "input",- "description": "Data input to buffer 6; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC."+ "description": "Data input to noninverting buffer 6; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V." }, { "number": "8", "name": "A7", "type": "input",- "description": "Data input to buffer 7; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC."+ "description": "Data input to noninverting buffer 7; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V." }, { "number": "9", "name": "A8", "type": "input",- "description": "Data input to buffer 8; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC."+ "description": "Data input to noninverting buffer 8; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V." }, { "number": "10", "name": "GND", "type": "power_in",- "description": "Ground reference pin for the device."+ "description": "Ground reference for the device; Vin and Vout must stay within GND to VCC." }, { "number": "11", "name": "Y8", "type": "tri_state",- "description": "Noninverting three-state buffer output 8; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open."+ "description": "Noninverting three-state output 8; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin." }, { "number": "12", "name": "Y7", "type": "tri_state",- "description": "Noninverting three-state buffer output 7; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open."+ "description": "Noninverting three-state output 7; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin." }, { "number": "13", "name": "Y6", "type": "tri_state",- "description": "Noninverting three-state buffer output 6; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open."+ "description": "Noninverting three-state output 6; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin." }, { "number": "14", "name": "Y5", "type": "tri_state",- "description": "Noninverting three-state buffer output 5; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open."+ "description": "Noninverting three-state output 5; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin." }, { "number": "15", "name": "Y4", "type": "tri_state",- "description": "Noninverting three-state buffer output 4; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open."+ "description": "Noninverting three-state output 4; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin." }, { "number": "16", "name": "Y3", "type": "tri_state",- "description": "Noninverting three-state buffer output 3; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open."+ "description": "Noninverting three-state output 3; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin." }, { "number": "17", "name": "Y2", "type": "tri_state",- "description": "Noninverting three-state buffer output 2; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open."+ "description": "Noninverting three-state output 2; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin." }, { "number": "18", "name": "Y1", "type": "tri_state",- "description": "Noninverting three-state buffer output 1; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open."+ "description": "Noninverting three-state output 1; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin." }, { "number": "19", "name": "OE2", "type": "input",- "description": "Output enable input; when either OE1 or OE2 is high, the terminal outputs are in the high impedance state."+ "description": "Output enable: when OE2 or OE1 is high, the terminal outputs go to the high-impedance state." }, { "number": "20", "name": "VCC", "type": "power_in",- "description": "Positive supply; the recommended DC supply range is 2.0 V to 3.6 V, with absolute maximum 7.0 V."+ "description": "Positive supply; recommended operating range 2.0 V to 3.6 V, absolute maximum 7.0 V." } ], "provenance": {@@ -198,11 +197,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The pin assignment figure text in the extracted datasheet is scrambled, so the pin-to-name mapping w; The datasheet does not say which outputs each output enable controls. It states only that when eithe"+ "extractor flagged: Datasheet describes OE1 and OE2 as active-low enables (function table: outputs enabled when both are" ], "pages_sent": 7,- "cost_usd": 0.0546,- "at": "2026-11-12T08:00:01"+ "cost_usd": 0.0521,+ "at": "2026-11-13T01:38:24" }, "datasheet": { "url": "https://www.onsemi.com/pdf/datasheet/mc74lvx541dw-d.pdf",@@ -239,7 +238,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",- "checked": "2026-11-12",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -257,13 +256,13 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "93b129d66c15fb9fbce3505b18779e444e6f16bcee1726568f35382df5f59e3d",- "checked": "2026-11-12",+ "sha256": "384b9466bc3d3712a033b0a5dc108be3dc891d3fbaa19c53e850747b808b4fd0",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ], "package_dims": {- "package_code": "SOIC-20 (CASE 751D-05)",+ "package_code": "SOIC-20 (DW suffix, CASE 751D-05)", "source_page": 7, "D": { "nom_mm": 12.8,
page.json+34−33@@ -4,7 +4,7 @@ "slug": "mc74lvx541dwg", "title": "MC74LVX541DWG", "brief": "onsemi Buffer/Driver/Transceiver, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.1",+ "version": "0.1.2", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -25,7 +25,7 @@ "symbol": "mc74lvx541dwg.kicad_sym", "footprint": "mc74lvx541dwg.kicad_mod", "model_3d": "mc74lvx541dwg-hero.glb",- "model_3d_plain": "mc74lvx541dwg-etched.glb",+ "model_3d_plain": "mc74lvx541dwg.glb", "model_3d_step": "mc74lvx541dwg-etched.step", "model_3d_step_plain": "mc74lvx541dwg.step", "lbr": "mc74lvx541dwg.lbr"@@ -36,7 +36,7 @@ "mouser": "863-MC74LVX541DWG" }, "distributor_check": {- "checked_at": "2026-11-12T08:00:24Z",+ "checked_at": "2026-11-13T01:38:36Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "MC74LVX541DWG-ND",@@ -52,121 +52,121 @@ "number": "1", "name": "OE1", "type": "input",- "description": "Output enable input; when either OE1 or OE2 is high, the terminal outputs are in the high impedance state."+ "description": "Output enable, active low: when OE1 or OE2 is high, the terminal outputs go to the high-impedance state." }, { "number": "2", "name": "A1", "type": "input",- "description": "Data input to buffer 1; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC."+ "description": "Data input to noninverting buffer 1; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V." }, { "number": "3", "name": "A2", "type": "input",- "description": "Data input to buffer 2; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC."+ "description": "Data input to noninverting buffer 2; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V." }, { "number": "4", "name": "A3", "type": "input",- "description": "Data input to buffer 3; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC."+ "description": "Data input to noninverting buffer 3; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V." }, { "number": "5", "name": "A4", "type": "input",- "description": "Data input to buffer 4; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC."+ "description": "Data input to noninverting buffer 4; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V." }, { "number": "6", "name": "A5", "type": "input",- "description": "Data input to buffer 5; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC."+ "description": "Data input to noninverting buffer 5; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V." }, { "number": "7", "name": "A6", "type": "input",- "description": "Data input to buffer 6; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC."+ "description": "Data input to noninverting buffer 6; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V." }, { "number": "8", "name": "A7", "type": "input",- "description": "Data input to buffer 7; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC."+ "description": "Data input to noninverting buffer 7; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V." }, { "number": "9", "name": "A8", "type": "input",- "description": "Data input to buffer 8; Vin must stay between GND and VCC for proper operation, and unused inputs must be tied to GND or VCC."+ "description": "Data input to noninverting buffer 8; inputs tolerate voltages up to 7.0 V, with recommended Vin range 0 to 5.5 V." }, { "number": "10", "name": "GND", "type": "power_in",- "description": "Ground reference pin for the device."+ "description": "Ground reference for the device; Vin and Vout must stay within GND to VCC." }, { "number": "11", "name": "Y8", "type": "tri_state",- "description": "Noninverting three-state buffer output 8; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open."+ "description": "Noninverting three-state output 8; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin." }, { "number": "12", "name": "Y7", "type": "tri_state",- "description": "Noninverting three-state buffer output 7; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open."+ "description": "Noninverting three-state output 7; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin." }, { "number": "13", "name": "Y6", "type": "tri_state",- "description": "Noninverting three-state buffer output 6; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open."+ "description": "Noninverting three-state output 6; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin." }, { "number": "14", "name": "Y5", "type": "tri_state",- "description": "Noninverting three-state buffer output 5; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open."+ "description": "Noninverting three-state output 5; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin." }, { "number": "15", "name": "Y4", "type": "tri_state",- "description": "Noninverting three-state buffer output 4; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open."+ "description": "Noninverting three-state output 4; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin." }, { "number": "16", "name": "Y3", "type": "tri_state",- "description": "Noninverting three-state buffer output 3; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open."+ "description": "Noninverting three-state output 3; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin." }, { "number": "17", "name": "Y2", "type": "tri_state",- "description": "Noninverting three-state buffer output 2; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open."+ "description": "Noninverting three-state output 2; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin." }, { "number": "18", "name": "Y1", "type": "tri_state",- "description": "Noninverting three-state buffer output 1; it is in high impedance when OE1 or OE2 is high, and unused outputs must be left open."+ "description": "Noninverting three-state output 1; high impedance when OE1 or OE2 is high, maximum output current ±25 mA per pin." }, { "number": "19", "name": "OE2", "type": "input",- "description": "Output enable input; when either OE1 or OE2 is high, the terminal outputs are in the high impedance state."+ "description": "Output enable: when OE2 or OE1 is high, the terminal outputs go to the high-impedance state." }, { "number": "20", "name": "VCC", "type": "power_in",- "description": "Positive supply; the recommended DC supply range is 2.0 V to 3.6 V, with absolute maximum 7.0 V."+ "description": "Positive supply; recommended operating range 2.0 V to 3.6 V, absolute maximum 7.0 V." } ], "provenance": {@@ -180,11 +180,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The pin assignment figure text in the extracted datasheet is scrambled, so the pin-to-name mapping w; The datasheet does not say which outputs each output enable controls. It states only that when eithe"+ "extractor flagged: Datasheet describes OE1 and OE2 as active-low enables (function table: outputs enabled when both are" ], "pages_sent": 7,- "cost_usd": 0.0546,- "at": "2026-11-12T08:00:01"+ "cost_usd": 0.0521,+ "at": "2026-11-13T01:38:24" }, "datasheet": { "url": "https://www.onsemi.com/pdf/datasheet/mc74lvx541dw-d.pdf",@@ -221,7 +221,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",- "checked": "2026-11-12",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -239,13 +239,13 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "93b129d66c15fb9fbce3505b18779e444e6f16bcee1726568f35382df5f59e3d",- "checked": "2026-11-12",+ "sha256": "384b9466bc3d3712a033b0a5dc108be3dc891d3fbaa19c53e850747b808b4fd0",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ], "package_dims": {- "package_code": "SOIC-20 (CASE 751D-05)",+ "package_code": "SOIC-20 (DW suffix, CASE 751D-05)", "source_page": 7, "D": { "nom_mm": 12.8,@@ -1026,10 +1026,11 @@ "viewers/symbol.html", "viewers/footprint.html", "mc74lvx541dwg-hero.glb",- "mc74lvx541dwg-hero.overlay.json",- "mc74lvx541dwg-etched.glb"+ "mc74lvx541dwg-hero.overlay.json" ], "visibility": { "public": true- }+ },+ "description": "onsemi Buffer/Driver/Transceiver, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }