← Commit history
Publish 0.1.1
4 files changed
+665−660
README.md+73−73@@ -2,32 +2,32 @@ **onsemi** · Latches · SOIC-20-300mil -MC74AC573DWG from onsemi, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+MC74AC573DWG from onsemi, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD. ## Pinout | Pin | Name | Type | Function | |---|---|---|---|-| 1 | OE | input | 3-state output enable input; LOW enables the output buffers, HIGH puts them in high impedance without blocking new data entering the latches. |-| 2 | D0 | input | Data input 0; data enters the latch when LE is HIGH. |-| 3 | D1 | input | Data input 1; data enters the latch when LE is HIGH. |-| 4 | D2 | input | Data input 2; data enters the latch when LE is HIGH. |-| 5 | D3 | input | Data input 3; data enters the latch when LE is HIGH. |-| 6 | D4 | input | Data input 4; data enters the latch when LE is HIGH. |-| 7 | D5 | input | Data input 5; data enters the latch when LE is HIGH. |-| 8 | D6 | input | Data input 6; data enters the latch when LE is HIGH. |-| 9 | D7 | input | Data input 7; data enters the latch when LE is HIGH. |-| 10 | GND | power_in | Ground reference for the supply and all voltages. |-| 11 | LE | input | Latch enable input; HIGH makes the latches transparent, LOW stores the data present at D a setup time before the HIGH-to-LOW transition. |-| 12 | O7 | tri_state | 3-state latch output 7, sources/sinks 24 mA. |-| 13 | O6 | tri_state | 3-state latch output 6, sources/sinks 24 mA. |-| 14 | O5 | tri_state | 3-state latch output 5, sources/sinks 24 mA. |-| 15 | O4 | tri_state | 3-state latch output 4, sources/sinks 24 mA. |-| 16 | O3 | tri_state | 3-state latch output 3, sources/sinks 24 mA. |-| 17 | O2 | tri_state | 3-state latch output 2, sources/sinks 24 mA. |-| 18 | O1 | tri_state | 3-state latch output 1, sources/sinks 24 mA. |-| 19 | O0 | tri_state | 3-state latch output 0, sources/sinks 24 mA. |-| 20 | VCC | power_in | Positive supply; recommended 2.0 to 6.0 V for 'AC (4.5 to 5.5 V for 'ACT), absolute maximum -0.5 to +7.0 V. |+| 1 | OE | input | 3-State Output Enable Input: when LOW the output buffers are enabled, and when HIGH they are in the high-impedance mode. |+| 2 | D0 | input | Data Input 0: data on this pin enters the latch while LE is HIGH. |+| 3 | D1 | input | Data Input 1: data on this pin enters the latch while LE is HIGH. |+| 4 | D2 | input | Data Input 2: data on this pin enters the latch while LE is HIGH. |+| 5 | D3 | input | Data Input 3: data on this pin enters the latch while LE is HIGH. |+| 6 | D4 | input | Data Input 4: data on this pin enters the latch while LE is HIGH. |+| 7 | D5 | input | Data Input 5: data on this pin enters the latch while LE is HIGH. |+| 8 | D6 | input | Data Input 6: data on this pin enters the latch while LE is HIGH. |+| 9 | D7 | input | Data Input 7: data on this pin enters the latch while LE is HIGH. |+| 10 | GND | power_in | Ground reference for all voltages (VIN, VOUT and VCC are referenced to GND). |+| 11 | LE | input | Latch Enable Input: when HIGH the latches are transparent, and when LOW they store the data present at the Dn inputs. |+| 12 | O7 | tri_state | 3-State Latch Output 7, enabled when OE is LOW and high impedance when OE is HIGH. |+| 13 | O6 | tri_state | 3-State Latch Output 6, enabled when OE is LOW and high impedance when OE is HIGH. |+| 14 | O5 | tri_state | 3-State Latch Output 5, enabled when OE is LOW and high impedance when OE is HIGH. |+| 15 | O4 | tri_state | 3-State Latch Output 4, enabled when OE is LOW and high impedance when OE is HIGH. |+| 16 | O3 | tri_state | 3-State Latch Output 3, enabled when OE is LOW and high impedance when OE is HIGH. |+| 17 | O2 | tri_state | 3-State Latch Output 2, enabled when OE is LOW and high impedance when OE is HIGH. |+| 18 | O1 | tri_state | 3-State Latch Output 1, enabled when OE is LOW and high impedance when OE is HIGH. |+| 19 | O0 | tri_state | 3-State Latch Output 0, enabled when OE is LOW and high impedance when OE is HIGH. |+| 20 | VCC | power_in | Supply voltage: 2.0 V to 6.0 V for 74AC devices and 4.5 V to 5.5 V for 74ACT devices, referenced to GND. | ## Key specifications @@ -44,62 +44,62 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| DC Supply Voltage | VCC | -0.5 | | 7 | V | Referenced to GND | 3 |-| DC Input Voltage | VIN | -0.5 | | 5.5 | V | -0.5 to VCC +0.5 V, Referenced to GND | 3 |-| DC Output Voltage | VOUT | -0.5 | | 5.5 | V | -0.5 to VCC +0.5 V, Referenced to GND | 3 |+| DC Supply Voltage (Referenced to GND) | VCC | -0.5 | | 7 | V | Referenced to GND | 3 | | DC Input Diode Current | IIK | -20 | | 20 | mA | | 3 | | DC Output Diode Current | IOK | -50 | | 50 | mA | | 3 | | DC Output Sink/Source Current | IOUT | -50 | | 50 | mA | | 3 | | DC Supply Current, per Output Pin | ICC | -50 | | 50 | mA | | 3 | | DC Ground Current, per Output Pin | IGND | -100 | | 100 | mA | | 3 |-| Storage Temperature Range | TSTG | -65 | | 150 | C | | 3 |-| Lead temperature, 1 mm from Case for 10 Seconds | TL | | | 260 | C | 1 mm from case, 10 s | 3 |-| Junction Temperature Under Bias | TJ | | | 140 | C | | 3 |-| Latchup Performance | ILatchup | -100 | | 100 | mA | Above VCC and Below GND at 85C | 3 |-| Thermal Resistance, SOIC | θJA | | 65.8 | | C/W | SOIC, JESD 51-7 | 3 |-| Supply Voltage (AC) | VCC | 2 | 5 | 6 | V | 'AC | 3 |-| DC Input Voltage, Output Voltage | VIN, VOUT | 0 | | | V | Max = VCC | 3 |-| Input Rise and Fall Time | tr, tf | | 150 | | ns/V | 'AC, VCC @ 3.0 V | 3 |-| Input Rise and Fall Time | tr, tf | | 40 | | ns/V | 'AC, VCC @ 4.5 V | 3 |-| Input Rise and Fall Time | tr, tf | | 25 | | ns/V | 'AC, VCC @ 5.5 V | 3 |+| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 3 |+| Junction Temperature Under Bias | TJ | | | 140 | °C | Under bias | 3 |+| Latchup Performance Above VCC and Below GND | ILatchup | -100 | | 100 | mA | At 85°C (Note 6) | 3 |+| DC Supply Voltage ′AC | VCC | 2 | 5 | 6 | V | ′AC devices | 3 |+| DC Input Voltage, Output Voltage (Ref. to GND) | VIN, VOUT | 0 | | | V | Referenced to GND | 3 | | Operating Ambient Temperature Range | TA | -40 | 25 | 85 | °C | | 3 |-| Output Current - High | IOH | | | -24 | mA | | 3 |-| Output Current - Low | IOL | | | 24 | mA | | 3 |-| Minimum High Level Input Voltage | VIH | 2.1 | 1.5 | | V | VCC = 3.0 V, TA = +25°C, VOUT = 0.1 V or VCC − 0.1 V | 4 |-| Minimum High Level Input Voltage | VIH | 3.15 | 2.25 | | V | VCC = 4.5 V, TA = +25°C, VOUT = 0.1 V or VCC − 0.1 V | 4 |-| Minimum High Level Input Voltage | VIH | 3.85 | 2.75 | | V | VCC = 5.5 V, TA = +25°C, VOUT = 0.1 V or VCC − 0.1 V | 4 |-| Maximum Low Level Input Voltage | VIL | | 1.5 | 0.9 | V | VCC = 3.0 V, TA = +25°C, VOUT = 0.1 V or VCC − 0.1 V | 4 |-| Maximum Low Level Input Voltage | VIL | | 2.25 | 1.35 | V | VCC = 4.5 V, TA = +25°C, VOUT = 0.1 V or VCC − 0.1 V | 4 |-| Maximum Low Level Input Voltage | VIL | | 2.75 | 1.65 | V | VCC = 5.5 V, TA = +25°C, VOUT = 0.1 V or VCC − 0.1 V | 4 |-| Minimum High Level Output Voltage | VOH | 2.9 | 2.99 | | V | VCC = 3.0 V, TA = +25°C, IOUT = −50 µA | 4 |-| Minimum High Level Output Voltage | VOH | 4.4 | 4.49 | | V | VCC = 4.5 V, TA = +25°C, IOUT = −50 µA | 4 |-| Minimum High Level Output Voltage | VOH | 5.4 | 5.49 | | V | VCC = 5.5 V, TA = +25°C, IOUT = −50 µA | 4 |-| Minimum High Level Output Voltage | VOH | 2.56 | | | V | VCC = 3.0 V, TA = +25°C, VIN = VIL or VIH, IOH −12 mA | 4 |-| Minimum High Level Output Voltage | VOH | 3.86 | | | V | VCC = 4.5 V, TA = +25°C, VIN = VIL or VIH, IOH −24 mA | 4 |-| Minimum High Level Output Voltage | VOH | 4.86 | | | V | VCC = 5.5 V, TA = +25°C, VIN = VIL or VIH, IOH −24 mA | 4 |-| Maximum Low Level Output Voltage | VOL | | 0.002 | 0.1 | V | VCC = 3.0 V, TA = +25°C, IOUT = 50 µA | 4 |-| Maximum Low Level Output Voltage | VOL | | 0.001 | 0.1 | V | VCC = 4.5 V, TA = +25°C, IOUT = 50 µA | 4 |-| Maximum Low Level Output Voltage | VOL | | | 0.36 | V | VCC = 3.0 V, TA = +25°C, VIN = VIL or VIH, IOL 12 mA | 4 |-| Maximum Input Leakage Current | IIN | -0.1 | | 0.1 | µA | VCC = 5.5 V, TA = +25°C, VI = VCC, GND | 4 |-| Maximum Input Leakage Current | IIN | -1 | | 1 | µA | VCC = 5.5 V, TA = −40°C to +85°C, VI = VCC, GND | 4 |-| Maximum 3-State Current | IOZ | -0.5 | | 0.5 | µA | VCC = 5.5 V, TA = +25°C, VI (OE) = VIL, VIH; VI = VCC, GND; VO = VCC, GND | 4 |-| Maximum 3-State Current | IOZ | -5 | | 5 | µA | VCC = 5.5 V, TA = −40°C to +85°C, VI (OE) = VIL, VIH; VI = VCC, GND; VO = VCC, GND | 4 |-| Minimum Dynamic Output Current | IOLD | 75 | | | mA | VCC = 5.5 V, TA = −40°C to +85°C, VOLD = 1.65 V Max | 4 |-| Minimum Dynamic Output Current | IOHD | | | -75 | mA | VCC = 5.5 V, TA = −40°C to +85°C, VOHD = 3.85 V Min | 4 |-| Maximum Quiescent Supply Current | ICC | | | 80 | µA | VCC = 5.5 V, TA = −40°C to +85°C, VIN = VCC or GND | 4 |-| Propagation Delay Dn to On (tPLH) | tPLH | 2 | | 11.5 | ns | VCC = 5.0 V, TA = −40°C to +85°C, CL = 50 pF | 5 |-| Propagation Delay Dn to On (tPHL) | tPHL | 2 | | 11 | ns | VCC = 5.0 V, TA = −40°C to +85°C, CL = 50 pF | 5 |-| Propagation Delay LE to On (tPLH) | tPLH | 2 | | 11 | ns | VCC = 5.0 V, TA = −40°C to +85°C, CL = 50 pF | 5 |-| Propagation Delay LE to On (tPHL) | tPHL | 2 | | 10 | ns | VCC = 5.0 V, TA = −40°C to +85°C, CL = 50 pF | 5 |-| Output Enable Time | tPZH | 2 | | 10 | ns | VCC = 5.0 V, TA = −40°C to +85°C, CL = 50 pF | 5 |-| Output Enable Time | tPZL | 2 | | 9.5 | ns | VCC = 5.0 V, TA = −40°C to +85°C, CL = 50 pF | 5 |-| Output Disable Time | tPHZ | 2 | | 12 | ns | VCC = 5.0 V, TA = −40°C to +85°C, CL = 50 pF | 5 |-| Output Disable Time | tPLZ | 2 | | 9 | ns | VCC = 5.0 V, TA = −40°C to +85°C, CL = 50 pF | 5 |-| Setup Time, HIGH or LOW Dn to LE | ts | 3.5 | | | ns | VCC = 5.0 V, TA = −40°C to +85°C, CL = 50 pF | 5 |-| Hold Time, HIGH or LOW Dn to LE | th | 2 | | | ns | VCC = 5.0 V, TA = −40°C to +85°C, CL = 50 pF | 5 |-| LE Pulse Width, HIGH | tw | 5 | | | ns | VCC = 5.0 V, TA = −40°C to +85°C, CL = 50 pF | 5 |-| Input Capacitance | CIN | | 5 | | pF | VCC = 5.0 V | 7 |-| Power Dissipation Capacitance | CPD | | 25 | | pF | VCC = 5.0 V | 7 |+| Output Current − High | IOH | | | -24 | mA | | 3 |+| Output Current − Low | IOL | | | 24 | mA | | 3 |+| Minimum High Level Input Voltage | VIH | 2.1 | 1.5 | | V | VCC = 3.0 V; VOUT = 0.1 V or VCC − 0.1 V; TA −40 to +85°C | 4 |+| Minimum High Level Input Voltage | VIH | 3.15 | 2.25 | | V | VCC = 4.5 V; VOUT = 0.1 V or VCC − 0.1 V; TA −40 to +85°C | 4 |+| Minimum High Level Input Voltage | VIH | 3.85 | 2.75 | | V | VCC = 5.5 V; VOUT = 0.1 V or VCC − 0.1 V; TA −40 to +85°C | 4 |+| Maximum Low Level Input Voltage | VIL | | 1.5 | 0.9 | V | VCC = 3.0 V; VOUT = 0.1 V or VCC − 0.1 V; TA −40 to +85°C | 4 |+| Maximum Low Level Input Voltage | VIL | | 2.25 | 1.35 | V | VCC = 4.5 V; VOUT = 0.1 V or VCC − 0.1 V; TA −40 to +85°C | 4 |+| Maximum Low Level Input Voltage | VIL | | 2.75 | 1.65 | V | VCC = 5.5 V; VOUT = 0.1 V or VCC − 0.1 V; TA −40 to +85°C | 4 |+| Minimum High Level Output Voltage | VOH | 2.9 | 2.99 | | V | VCC = 3.0 V; IOUT = −50 µA; TA −40 to +85°C | 4 |+| Minimum High Level Output Voltage | VOH | 4.4 | 4.49 | | V | VCC = 4.5 V; IOUT = −50 µA; TA −40 to +85°C | 4 |+| Minimum High Level Output Voltage | VOH | 5.4 | 5.49 | | V | VCC = 5.5 V; IOUT = −50 µA; TA −40 to +85°C | 4 |+| Minimum High Level Output Voltage | VOH | 2.46 | | | V | VCC = 3.0 V; VIN = VIL or VIH; IOH = −12 mA; TA −40 to +85°C | 4 |+| Minimum High Level Output Voltage | VOH | 3.76 | | | V | VCC = 4.5 V; VIN = VIL or VIH; IOH = −24 mA; TA −40 to +85°C | 4 |+| Minimum High Level Output Voltage | VOH | 4.76 | | | V | VCC = 5.5 V; VIN = VIL or VIH; IOH = −24 mA; TA −40 to +85°C | 4 |+| Maximum Low Level Output Voltage | VOL | | 0.002 | 0.1 | V | VCC = 3.0 V; IOUT = 50 µA; TA −40 to +85°C | 4 |+| Maximum Low Level Output Voltage | VOL | | 0.001 | 0.1 | V | VCC = 4.5 V; IOUT = 50 µA; TA −40 to +85°C | 4 |+| Maximum Low Level Output Voltage | VOL | | | 0.44 | V | VCC = 3.0 V; VIN = VIL or VIH; IOL = 12 mA; TA −40 to +85°C | 4 |+| Maximum Input Leakage Current | IIN | -1 | | 1 | µA | VCC = 5.5 V; VI = VCC, GND; TA −40 to +85°C | 4 |+| Maximum 3-State Current | IOZ | -5 | | 5 | µA | VCC = 5.5 V; VI(OE) = VIL, VIH; VO = VCC, GND; TA −40 to +85°C | 4 |+| Minimum Dynamic Output Current (IOLD) | IOLD | | | 75 | mA | VCC = 5.5 V; VOLD = 1.65 V Max | 4 |+| Minimum Dynamic Output Current (IOHD) | IOHD | -75 | | | mA | VCC = 5.5 V; VOHD = 3.85 V Min | 4 |+| Maximum Quiescent Supply Current | ICC | | | 80 | µA | VCC = 5.5 V; VIN = VCC or GND; TA −40 to +85°C | 4 |+| Propagation Delay Dn to On (tPLH) | tPLH | 2 | | 15 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-5 | 5 |+| Propagation Delay Dn to On (tPLH) | tPLH | 2 | | 11.5 | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-5 | 5 |+| Propagation Delay Dn to On (tPHL) | tPHL | 2 | | 14 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-5 | 5 |+| Propagation Delay Dn to On (tPHL) | tPHL | 2 | | 11 | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-5 | 5 |+| Propagation Delay LE to On (tPLH) | tPLH | 2 | | 15 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-6 | 5 |+| Propagation Delay LE to On (tPLH) | tPLH | 2 | | 11 | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-6 | 5 |+| Propagation Delay LE to On (tPHL) | tPHL | 2 | | 14 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-6 | 5 |+| Propagation Delay LE to On (tPHL) | tPHL | 2 | | 10 | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-6 | 5 |+| Output Enable Time (tPZH) | tPZH | 2 | | 12 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-7 | 5 |+| Output Enable Time (tPZH) | tPZH | 2 | | 10 | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-7 | 5 |+| Output Enable Time (tPZL) | tPZL | 2 | | 12.5 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-8 | 5 |+| Output Enable Time (tPZL) | tPZL | 2 | | 9.5 | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-8 | 5 |+| Output Disable Time (tPHZ) | tPHZ | 2 | | 13.5 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-7 | 5 |+| Output Disable Time (tPHZ) | tPHZ | 2 | | 12 | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-7 | 5 |+| Output Disable Time (tPLZ) | tPLZ | 2 | | 10.5 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-8 | 5 |+| Output Disable Time (tPLZ) | tPLZ | 2 | | 9 | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-8 | 5 |+| Setup Time, HIGH or LOW Dn to LE | ts | 4 | | | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-9 | 5 |+| Setup Time, HIGH or LOW Dn to LE | ts | 3.5 | | | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-9 | 5 |+| Hold Time, HIGH or LOW Dn to LE | th | 2 | | | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-9 | 5 |+| LE Pulse Width, HIGH | tw | 7 | | | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-6 | 5 |+| LE Pulse Width, HIGH | tw | 5 | | | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-6 | 5 |+| Thermal Resistance, Junction-to-Ambient (SOIC) | JA | | 65.8 | | °C/W | SOIC package; JESD 51-7 (Note 2) | 3 | ## CAD (KiCad official) @@ -112,8 +112,8 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mc74ac573dw-d.pdf) (11 pp, sha256 `215b0647639095c6`, retrieved 2026-11-12, tier: manufacturer)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mc74ac573dw-d.pdf) (11 pp, sha256 `215b0647639095c6`, retrieved 2026-11-13, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). [Datasheet PDF](docs/mc74ac573dwg-datasheet.pdf)
mc74ac573dwg-hero.overlay.json+527−522@@ -1,524 +1,529 @@ {- "spec": "adom-hero 1.4",- "mpn": "MC74AC573DWG",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {- "pad_outlines": {- "material": "Footprint pads - teal dashed outlines - 50 percent opacity",- "rgba": [- 0.0,- 0.902,- 0.863,- 0.5- ],- "pads": 20,- "span_mm": 12.03,- "dash_mm": 0.3008,- "gap_mm": 0.1804,- "pad_stroke_mm": 0.0722- },- "silkscreen": {- "material": "Silkscreen reference lines - 30 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.3- ],- "footprint_items": 7,- "pin1": {- "source": "footprint silkscreen",- "pad": "1"- }- },- "signal_names": {- "material": "Signal names - 50 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.5- ],- "font": "DejaVu Sans Mono",- "labels": 20,- "sides": "top + mirrored underside (single-sided)",- "fallback_to_pad_number": 0- }- },- "align": {- "ok": true,- "centre_offset_mm": 0.0,- "tolerance_mm": 0.962,- "orientation_flipped": false,- "contacts_bbox_mm": [- -5.15,- 5.15,- -5.92,- 5.92- ],- "pads_bbox_mm": [- -5.675,- 5.675,- -6.015,- 6.015- ],- "seating_z_mm": -0.0- },- "sources": {- "glb": "mc74ac573dwg-etched.glb",- "glb_sha256": "d28536e84cb6d6aac0cc41ec330a4a22fe6e02e1b73d0deb6d52922373742bed",- "footprint": "mc74ac573dwg.kicad_mod",- "footprint_sha256": "9783bc19f518a72442ddbfe6289e767a42c3d23358b65c3447b6a36bdd0e7dcf",- "pins": "page.json component.pins",- "pins_sha256": "c1aed3485ab4abb267552e17ebdb95b28e39eb0db1c4533eff420cc89f57de46"- },- "generator": "adom-wiki 1.8.22 (component_hero)",- "labels": [- {- "pad": "1",- "text": "OE",- "x": -5.825,- "y": -5.715,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "2",- "text": "D0",- "x": -5.825,- "y": -4.445,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "3",- "text": "D1",- "x": -5.825,- "y": -3.175,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "4",- "text": "D2",- "x": -5.825,- "y": -1.905,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "5",- "text": "D3",- "x": -5.825,- "y": -0.635,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "6",- "text": "D4",- "x": -5.825,- "y": 0.635,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "7",- "text": "D5",- "x": -5.825,- "y": 1.905,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "8",- "text": "D6",- "x": -5.825,- "y": 3.175,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "9",- "text": "D7",- "x": -5.825,- "y": 4.445,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "10",- "text": "GND",- "x": -5.825,- "y": 5.715,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "11",- "text": "LE",- "x": 5.825,- "y": 5.715,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "12",- "text": "O7",- "x": 5.825,- "y": 4.445,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "13",- "text": "O6",- "x": 5.825,- "y": 3.175,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "14",- "text": "O5",- "x": 5.825,- "y": 1.905,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "15",- "text": "O4",- "x": 5.825,- "y": 0.635,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "16",- "text": "O3",- "x": 5.825,- "y": -0.635,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "17",- "text": "O2",- "x": 5.825,- "y": -1.905,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "18",- "text": "O1",- "x": 5.825,- "y": -3.175,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "19",- "text": "O0",- "x": 5.825,- "y": -4.445,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "20",- "text": "VCC",- "x": 5.825,- "y": -5.715,- "align": "left",- "vertical": false,- "h": 0.6- }+ "spec": "adom-hero 1.4",+ "mpn": "MC74AC573DWG",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 20,+ "span_mm": 12.03,+ "dash_mm": 0.3008,+ "gap_mm": 0.1804,+ "pad_stroke_mm": 0.0722+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 20,+ "sides": "top + mirrored underside (single-sided)",+ "omitted": null,+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "board_underside": true,+ "electrical_pads_without_contact": [],+ "mounting_pads_left_out": [],+ "centre_offset_mm": 0.0,+ "over_pads": true,+ "tolerance_mm": 0.962,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -5.15,+ 5.15,+ -5.92,+ 5.92+ ],+ "pads_bbox_mm": [+ -5.675,+ 5.675,+ -6.015,+ 6.015 ],- "pads": [- {- "number": "1",- "shape": "roundrect",- "center_mm": [- -4.65,- -5.715- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "2",- "shape": "roundrect",- "center_mm": [- -4.65,- -4.445- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "3",- "shape": "roundrect",- "center_mm": [- -4.65,- -3.175- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "4",- "shape": "roundrect",- "center_mm": [- -4.65,- -1.905- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "5",- "shape": "roundrect",- "center_mm": [- -4.65,- -0.635- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "6",- "shape": "roundrect",- "center_mm": [- -4.65,- 0.635- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "7",- "shape": "roundrect",- "center_mm": [- -4.65,- 1.905- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "8",- "shape": "roundrect",- "center_mm": [- -4.65,- 3.175- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "9",- "shape": "roundrect",- "center_mm": [- -4.65,- 4.445- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "10",- "shape": "roundrect",- "center_mm": [- -4.65,- 5.715- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "11",- "shape": "roundrect",- "center_mm": [- 4.65,- 5.715- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "12",- "shape": "roundrect",- "center_mm": [- 4.65,- 4.445- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "13",- "shape": "roundrect",- "center_mm": [- 4.65,- 3.175- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "14",- "shape": "roundrect",- "center_mm": [- 4.65,- 1.905- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "15",- "shape": "roundrect",- "center_mm": [- 4.65,- 0.635- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "16",- "shape": "roundrect",- "center_mm": [- 4.65,- -0.635- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "17",- "shape": "roundrect",- "center_mm": [- 4.65,- -1.905- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "18",- "shape": "roundrect",- "center_mm": [- 4.65,- -3.175- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "19",- "shape": "roundrect",- "center_mm": [- 4.65,- -4.445- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- },- {- "number": "20",- "shape": "roundrect",- "center_mm": [- 4.65,- -5.715- ],- "size_mm": [- 2.05,- 0.6- ],- "rot": 0.0- }- ]-}+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "mc74ac573dwg-etched.glb",+ "glb_sha256": "d28536e84cb6d6aac0cc41ec330a4a22fe6e02e1b73d0deb6d52922373742bed",+ "footprint": "mc74ac573dwg.kicad_mod",+ "footprint_sha256": "9783bc19f518a72442ddbfe6289e767a42c3d23358b65c3447b6a36bdd0e7dcf",+ "pins": "page.json component.pins",+ "pins_sha256": "c1aed3485ab4abb267552e17ebdb95b28e39eb0db1c4533eff420cc89f57de46"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+ {+ "pad": "1",+ "text": "OE",+ "x": -5.825,+ "y": -5.715,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "D0",+ "x": -5.825,+ "y": -4.445,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "D1",+ "x": -5.825,+ "y": -3.175,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "D2",+ "x": -5.825,+ "y": -1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "D3",+ "x": -5.825,+ "y": -0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "D4",+ "x": -5.825,+ "y": 0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "D5",+ "x": -5.825,+ "y": 1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "D6",+ "x": -5.825,+ "y": 3.175,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "9",+ "text": "D7",+ "x": -5.825,+ "y": 4.445,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "10",+ "text": "GND",+ "x": -5.825,+ "y": 5.715,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "11",+ "text": "LE",+ "x": 5.825,+ "y": 5.715,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "12",+ "text": "O7",+ "x": 5.825,+ "y": 4.445,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "13",+ "text": "O6",+ "x": 5.825,+ "y": 3.175,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "14",+ "text": "O5",+ "x": 5.825,+ "y": 1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "15",+ "text": "O4",+ "x": 5.825,+ "y": 0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "16",+ "text": "O3",+ "x": 5.825,+ "y": -0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "17",+ "text": "O2",+ "x": 5.825,+ "y": -1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "18",+ "text": "O1",+ "x": 5.825,+ "y": -3.175,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "19",+ "text": "O0",+ "x": 5.825,+ "y": -4.445,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "20",+ "text": "VCC",+ "x": 5.825,+ "y": -5.715,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ -5.715+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ -4.445+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ -3.175+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ -1.905+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ -0.635+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ 0.635+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ 1.905+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ 3.175+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ 4.445+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ -4.65,+ 5.715+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ 5.715+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ 4.445+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ 3.175+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ 1.905+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ 0.635+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ -0.635+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "17",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ -1.905+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "18",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ -3.175+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "19",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ -4.445+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "20",+ "shape": "roundrect",+ "center_mm": [+ 4.65,+ -5.715+ ],+ "size_mm": [+ 2.05,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}
package.json+31−32@@ -1,6 +1,6 @@ { "slug": "mc74ac573dwg",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "onsemi Latches, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -28,8 +28,7 @@ "viewers/symbol.html", "viewers/footprint.html", "mc74ac573dwg-hero.glb",- "mc74ac573dwg-hero.overlay.json",- "mc74ac573dwg-etched.glb"+ "mc74ac573dwg-hero.overlay.json" ], "component": { "mpn": "MC74AC573DWG",@@ -43,7 +42,7 @@ "symbol": "mc74ac573dwg.kicad_sym", "footprint": "mc74ac573dwg.kicad_mod", "model_3d": "mc74ac573dwg-hero.glb",- "model_3d_plain": "mc74ac573dwg-etched.glb",+ "model_3d_plain": "mc74ac573dwg.glb", "model_3d_step": "mc74ac573dwg-etched.step", "model_3d_step_plain": "mc74ac573dwg.step", "lbr": "mc74ac573dwg.lbr"@@ -54,7 +53,7 @@ "mouser": "863-MC74AC573DWG" }, "distributor_check": {- "checked_at": "2026-11-12T04:55:56Z",+ "checked_at": "2026-11-13T00:17:18Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "MC74AC573DWGOS-ND",@@ -70,121 +69,121 @@ "number": "1", "name": "OE", "type": "input",- "description": "3-state output enable input; LOW enables the output buffers, HIGH puts them in high impedance without blocking new data entering the latches."+ "description": "3-State Output Enable Input: when LOW the output buffers are enabled, and when HIGH they are in the high-impedance mode." }, { "number": "2", "name": "D0", "type": "input",- "description": "Data input 0; data enters the latch when LE is HIGH."+ "description": "Data Input 0: data on this pin enters the latch while LE is HIGH." }, { "number": "3", "name": "D1", "type": "input",- "description": "Data input 1; data enters the latch when LE is HIGH."+ "description": "Data Input 1: data on this pin enters the latch while LE is HIGH." }, { "number": "4", "name": "D2", "type": "input",- "description": "Data input 2; data enters the latch when LE is HIGH."+ "description": "Data Input 2: data on this pin enters the latch while LE is HIGH." }, { "number": "5", "name": "D3", "type": "input",- "description": "Data input 3; data enters the latch when LE is HIGH."+ "description": "Data Input 3: data on this pin enters the latch while LE is HIGH." }, { "number": "6", "name": "D4", "type": "input",- "description": "Data input 4; data enters the latch when LE is HIGH."+ "description": "Data Input 4: data on this pin enters the latch while LE is HIGH." }, { "number": "7", "name": "D5", "type": "input",- "description": "Data input 5; data enters the latch when LE is HIGH."+ "description": "Data Input 5: data on this pin enters the latch while LE is HIGH." }, { "number": "8", "name": "D6", "type": "input",- "description": "Data input 6; data enters the latch when LE is HIGH."+ "description": "Data Input 6: data on this pin enters the latch while LE is HIGH." }, { "number": "9", "name": "D7", "type": "input",- "description": "Data input 7; data enters the latch when LE is HIGH."+ "description": "Data Input 7: data on this pin enters the latch while LE is HIGH." }, { "number": "10", "name": "GND", "type": "power_in",- "description": "Ground reference for the supply and all voltages."+ "description": "Ground reference for all voltages (VIN, VOUT and VCC are referenced to GND)." }, { "number": "11", "name": "LE", "type": "input",- "description": "Latch enable input; HIGH makes the latches transparent, LOW stores the data present at D a setup time before the HIGH-to-LOW transition."+ "description": "Latch Enable Input: when HIGH the latches are transparent, and when LOW they store the data present at the Dn inputs." }, { "number": "12", "name": "O7", "type": "tri_state",- "description": "3-state latch output 7, sources/sinks 24 mA."+ "description": "3-State Latch Output 7, enabled when OE is LOW and high impedance when OE is HIGH." }, { "number": "13", "name": "O6", "type": "tri_state",- "description": "3-state latch output 6, sources/sinks 24 mA."+ "description": "3-State Latch Output 6, enabled when OE is LOW and high impedance when OE is HIGH." }, { "number": "14", "name": "O5", "type": "tri_state",- "description": "3-state latch output 5, sources/sinks 24 mA."+ "description": "3-State Latch Output 5, enabled when OE is LOW and high impedance when OE is HIGH." }, { "number": "15", "name": "O4", "type": "tri_state",- "description": "3-state latch output 4, sources/sinks 24 mA."+ "description": "3-State Latch Output 4, enabled when OE is LOW and high impedance when OE is HIGH." }, { "number": "16", "name": "O3", "type": "tri_state",- "description": "3-state latch output 3, sources/sinks 24 mA."+ "description": "3-State Latch Output 3, enabled when OE is LOW and high impedance when OE is HIGH." }, { "number": "17", "name": "O2", "type": "tri_state",- "description": "3-state latch output 2, sources/sinks 24 mA."+ "description": "3-State Latch Output 2, enabled when OE is LOW and high impedance when OE is HIGH." }, { "number": "18", "name": "O1", "type": "tri_state",- "description": "3-state latch output 1, sources/sinks 24 mA."+ "description": "3-State Latch Output 1, enabled when OE is LOW and high impedance when OE is HIGH." }, { "number": "19", "name": "O0", "type": "tri_state",- "description": "3-state latch output 0, sources/sinks 24 mA."+ "description": "3-State Latch Output 0, enabled when OE is LOW and high impedance when OE is HIGH." }, { "number": "20", "name": "VCC", "type": "power_in",- "description": "Positive supply; recommended 2.0 to 6.0 V for 'AC (4.5 to 5.5 V for 'ACT), absolute maximum -0.5 to +7.0 V."+ "description": "Supply voltage: 2.0 V to 6.0 V for 74AC devices and 4.5 V to 5.5 V for 74ACT devices, referenced to GND." } ], "provenance": {@@ -192,17 +191,17 @@ "factory_chain": { "factory": "2.0.0", "extractor": "extract_pins 0.3",- "primary_model": "claude-sonnet-5-5",+ "primary_model": "claude-haiku-5-5", "primary_mode": "text", "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The pinout figure text on page 1 is garbled. Pin-to-name mapping was reconstructed from the printed "+ "extractor flagged: The pin numbers in the extracted Figure 1 text are scrambled, so the number-to-name assignment was r; The datasheet pin-function table lists only D0-D7, LE, OE and O0-O7. GND and VCC are shown in the Fi" ], "pages_sent": 11,- "cost_usd": 0.1278,- "at": "2026-11-12T04:55:37"+ "cost_usd": 0.0726,+ "at": "2026-11-13T00:17:06" }, "datasheet": { "url": "https://www.onsemi.com/pdf/datasheet/mc74ac573dw-d.pdf",@@ -239,7 +238,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",- "checked": "2026-11-12",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -257,8 +256,8 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "d2a7025858071cfb78856eddc070cabf696a9eddd0c58033384d54d62bf2dc72",- "checked": "2026-11-12",+ "sha256": "45f0040431c05397a8030766a295e42fefd52fa4abf0463f3828e27ff9c2a6a4",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],
page.json+34−33@@ -4,7 +4,7 @@ "slug": "mc74ac573dwg", "title": "MC74AC573DWG", "brief": "onsemi Latches, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -25,7 +25,7 @@ "symbol": "mc74ac573dwg.kicad_sym", "footprint": "mc74ac573dwg.kicad_mod", "model_3d": "mc74ac573dwg-hero.glb",- "model_3d_plain": "mc74ac573dwg-etched.glb",+ "model_3d_plain": "mc74ac573dwg.glb", "model_3d_step": "mc74ac573dwg-etched.step", "model_3d_step_plain": "mc74ac573dwg.step", "lbr": "mc74ac573dwg.lbr"@@ -36,7 +36,7 @@ "mouser": "863-MC74AC573DWG" }, "distributor_check": {- "checked_at": "2026-11-12T04:55:56Z",+ "checked_at": "2026-11-13T00:17:18Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "MC74AC573DWGOS-ND",@@ -52,121 +52,121 @@ "number": "1", "name": "OE", "type": "input",- "description": "3-state output enable input; LOW enables the output buffers, HIGH puts them in high impedance without blocking new data entering the latches."+ "description": "3-State Output Enable Input: when LOW the output buffers are enabled, and when HIGH they are in the high-impedance mode." }, { "number": "2", "name": "D0", "type": "input",- "description": "Data input 0; data enters the latch when LE is HIGH."+ "description": "Data Input 0: data on this pin enters the latch while LE is HIGH." }, { "number": "3", "name": "D1", "type": "input",- "description": "Data input 1; data enters the latch when LE is HIGH."+ "description": "Data Input 1: data on this pin enters the latch while LE is HIGH." }, { "number": "4", "name": "D2", "type": "input",- "description": "Data input 2; data enters the latch when LE is HIGH."+ "description": "Data Input 2: data on this pin enters the latch while LE is HIGH." }, { "number": "5", "name": "D3", "type": "input",- "description": "Data input 3; data enters the latch when LE is HIGH."+ "description": "Data Input 3: data on this pin enters the latch while LE is HIGH." }, { "number": "6", "name": "D4", "type": "input",- "description": "Data input 4; data enters the latch when LE is HIGH."+ "description": "Data Input 4: data on this pin enters the latch while LE is HIGH." }, { "number": "7", "name": "D5", "type": "input",- "description": "Data input 5; data enters the latch when LE is HIGH."+ "description": "Data Input 5: data on this pin enters the latch while LE is HIGH." }, { "number": "8", "name": "D6", "type": "input",- "description": "Data input 6; data enters the latch when LE is HIGH."+ "description": "Data Input 6: data on this pin enters the latch while LE is HIGH." }, { "number": "9", "name": "D7", "type": "input",- "description": "Data input 7; data enters the latch when LE is HIGH."+ "description": "Data Input 7: data on this pin enters the latch while LE is HIGH." }, { "number": "10", "name": "GND", "type": "power_in",- "description": "Ground reference for the supply and all voltages."+ "description": "Ground reference for all voltages (VIN, VOUT and VCC are referenced to GND)." }, { "number": "11", "name": "LE", "type": "input",- "description": "Latch enable input; HIGH makes the latches transparent, LOW stores the data present at D a setup time before the HIGH-to-LOW transition."+ "description": "Latch Enable Input: when HIGH the latches are transparent, and when LOW they store the data present at the Dn inputs." }, { "number": "12", "name": "O7", "type": "tri_state",- "description": "3-state latch output 7, sources/sinks 24 mA."+ "description": "3-State Latch Output 7, enabled when OE is LOW and high impedance when OE is HIGH." }, { "number": "13", "name": "O6", "type": "tri_state",- "description": "3-state latch output 6, sources/sinks 24 mA."+ "description": "3-State Latch Output 6, enabled when OE is LOW and high impedance when OE is HIGH." }, { "number": "14", "name": "O5", "type": "tri_state",- "description": "3-state latch output 5, sources/sinks 24 mA."+ "description": "3-State Latch Output 5, enabled when OE is LOW and high impedance when OE is HIGH." }, { "number": "15", "name": "O4", "type": "tri_state",- "description": "3-state latch output 4, sources/sinks 24 mA."+ "description": "3-State Latch Output 4, enabled when OE is LOW and high impedance when OE is HIGH." }, { "number": "16", "name": "O3", "type": "tri_state",- "description": "3-state latch output 3, sources/sinks 24 mA."+ "description": "3-State Latch Output 3, enabled when OE is LOW and high impedance when OE is HIGH." }, { "number": "17", "name": "O2", "type": "tri_state",- "description": "3-state latch output 2, sources/sinks 24 mA."+ "description": "3-State Latch Output 2, enabled when OE is LOW and high impedance when OE is HIGH." }, { "number": "18", "name": "O1", "type": "tri_state",- "description": "3-state latch output 1, sources/sinks 24 mA."+ "description": "3-State Latch Output 1, enabled when OE is LOW and high impedance when OE is HIGH." }, { "number": "19", "name": "O0", "type": "tri_state",- "description": "3-state latch output 0, sources/sinks 24 mA."+ "description": "3-State Latch Output 0, enabled when OE is LOW and high impedance when OE is HIGH." }, { "number": "20", "name": "VCC", "type": "power_in",- "description": "Positive supply; recommended 2.0 to 6.0 V for 'AC (4.5 to 5.5 V for 'ACT), absolute maximum -0.5 to +7.0 V."+ "description": "Supply voltage: 2.0 V to 6.0 V for 74AC devices and 4.5 V to 5.5 V for 74ACT devices, referenced to GND." } ], "provenance": {@@ -174,17 +174,17 @@ "factory_chain": { "factory": "2.0.0", "extractor": "extract_pins 0.3",- "primary_model": "claude-sonnet-5-5",+ "primary_model": "claude-haiku-5-5", "primary_mode": "text", "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The pinout figure text on page 1 is garbled. Pin-to-name mapping was reconstructed from the printed "+ "extractor flagged: The pin numbers in the extracted Figure 1 text are scrambled, so the number-to-name assignment was r; The datasheet pin-function table lists only D0-D7, LE, OE and O0-O7. GND and VCC are shown in the Fi" ], "pages_sent": 11,- "cost_usd": 0.1278,- "at": "2026-11-12T04:55:37"+ "cost_usd": 0.0726,+ "at": "2026-11-13T00:17:06" }, "datasheet": { "url": "https://www.onsemi.com/pdf/datasheet/mc74ac573dw-d.pdf",@@ -221,7 +221,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",- "checked": "2026-11-12",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -239,8 +239,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "d2a7025858071cfb78856eddc070cabf696a9eddd0c58033384d54d62bf2dc72",- "checked": "2026-11-12",+ "sha256": "45f0040431c05397a8030766a295e42fefd52fa4abf0463f3828e27ff9c2a6a4",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -1014,10 +1014,11 @@ "viewers/symbol.html", "viewers/footprint.html", "mc74ac573dwg-hero.glb",- "mc74ac573dwg-hero.overlay.json",- "mc74ac573dwg-etched.glb"+ "mc74ac573dwg-hero.overlay.json" ], "visibility": { "public": true- }+ },+ "description": "onsemi Latches, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }