← Commit history
README.md+78−74
@@ -8,26 +8,26 @@ MC74AC573DWG from onsemi, in a SOIC-20-300mil. Pinout and pin descriptions extra  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | OE | input | 3-State Output Enable Input: when LOW the output buffers are enabled, and when HIGH they are in the high-impedance mode. |-| 2 | D0 | input | Data Input 0: data on this pin enters the latch while LE is HIGH. |-| 3 | D1 | input | Data Input 1: data on this pin enters the latch while LE is HIGH. |-| 4 | D2 | input | Data Input 2: data on this pin enters the latch while LE is HIGH. |-| 5 | D3 | input | Data Input 3: data on this pin enters the latch while LE is HIGH. |-| 6 | D4 | input | Data Input 4: data on this pin enters the latch while LE is HIGH. |-| 7 | D5 | input | Data Input 5: data on this pin enters the latch while LE is HIGH. |-| 8 | D6 | input | Data Input 6: data on this pin enters the latch while LE is HIGH. |-| 9 | D7 | input | Data Input 7: data on this pin enters the latch while LE is HIGH. |-| 10 | GND | power_in | Ground reference for all voltages (VIN, VOUT and VCC are referenced to GND). |-| 11 | LE | input | Latch Enable Input: when HIGH the latches are transparent, and when LOW they store the data present at the Dn inputs. |-| 12 | O7 | tri_state | 3-State Latch Output 7, enabled when OE is LOW and high impedance when OE is HIGH. |-| 13 | O6 | tri_state | 3-State Latch Output 6, enabled when OE is LOW and high impedance when OE is HIGH. |-| 14 | O5 | tri_state | 3-State Latch Output 5, enabled when OE is LOW and high impedance when OE is HIGH. |-| 15 | O4 | tri_state | 3-State Latch Output 4, enabled when OE is LOW and high impedance when OE is HIGH. |-| 16 | O3 | tri_state | 3-State Latch Output 3, enabled when OE is LOW and high impedance when OE is HIGH. |-| 17 | O2 | tri_state | 3-State Latch Output 2, enabled when OE is LOW and high impedance when OE is HIGH. |-| 18 | O1 | tri_state | 3-State Latch Output 1, enabled when OE is LOW and high impedance when OE is HIGH. |-| 19 | O0 | tri_state | 3-State Latch Output 0, enabled when OE is LOW and high impedance when OE is HIGH. |-| 20 | VCC | power_in | Supply voltage: 2.0 V to 6.0 V for 74AC devices and 4.5 V to 5.5 V for 74ACT devices, referenced to GND. |+| 1 | ~{OE} | input | 3-state output enable input; LOW enables the outputs, HIGH puts them in high impedance without interfering with entering new data into the latches. |+| 2 | D0 | input | Data input 0; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE. |+| 3 | D1 | input | Data input 1; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE. |+| 4 | D2 | input | Data input 2; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE. |+| 5 | D3 | input | Data input 3; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE. |+| 6 | D4 | input | Data input 4; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE. |+| 7 | D5 | input | Data input 5; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE. |+| 8 | D6 | input | Data input 6; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE. |+| 9 | D7 | input | Data input 7; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE. |+| 10 | GND | power_in | Ground reference for the supply, inputs and outputs (0 V). |+| 11 | LE | input | Latch Enable input; HIGH makes the latches transparent, LOW stores the data present at Dn. |+| 12 | O7 | tri_state | 3-state latch output 7; sources/sinks 24 mA and is high impedance when OE is HIGH. |+| 13 | O6 | tri_state | 3-state latch output 6; sources/sinks 24 mA and is high impedance when OE is HIGH. |+| 14 | O5 | tri_state | 3-state latch output 5; sources/sinks 24 mA and is high impedance when OE is HIGH. |+| 15 | O4 | tri_state | 3-state latch output 4; sources/sinks 24 mA and is high impedance when OE is HIGH. |+| 16 | O3 | tri_state | 3-state latch output 3; sources/sinks 24 mA and is high impedance when OE is HIGH. |+| 17 | O2 | tri_state | 3-state latch output 2; sources/sinks 24 mA and is high impedance when OE is HIGH. |+| 18 | O1 | tri_state | 3-state latch output 1; sources/sinks 24 mA and is high impedance when OE is HIGH. |+| 19 | O0 | tri_state | 3-state latch output 0; sources/sinks 24 mA and is high impedance when OE is HIGH. |+| 20 | VCC | power_in | Positive supply; recommended 2.0 to 6.0 V for 'AC (4.5 to 5.5 V for 'ACT), absolute maximum -0.5 to +7.0 V. |  ## Key specifications @@ -44,62 +44,66 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| DC Supply Voltage (Referenced to GND) | VCC | -0.5 |  | 7 | V | Referenced to GND | 3 |+| DC Supply Voltage (′AC devices) | VCC | 2 | 5 | 6 | V | ′AC devices | 3 |+| DC Input/Output Voltage (Ref. to GND) | VIN, VOUT | 0 |  |  | V | Max printed as VCC | 3 |+| Input Rise and Fall Time, ′AC except Schmitt inputs | tr, tf |  |  | 150 | ns/V | VCC @ 3.0 V (Note 1) | 3 |+| Input Rise and Fall Time, ′AC except Schmitt inputs | tr, tf |  |  | 40 | ns/V | VCC @ 4.5 V (Note 1) | 3 |+| Input Rise and Fall Time, ′AC except Schmitt inputs | tr, tf |  |  | 25 | ns/V | VCC @ 5.5 V (Note 1) | 3 |+| Operating Ambient Temperature Range | TA | -40 | 25 | 85 | °C |  | 3 |+| Output Current − High | IOH |  |  | -24 | mA |  | 3 |+| Output Current − Low | IOL |  |  | 24 | mA |  | 3 |+| DC Supply Voltage (Referenced to GND) | VCC | -0.5 |  | 7 | V |  | 3 |+| DC Input Voltage (Referenced to GND) | VIN | -0.5 |  |  | V | Max printed as VCC + 0.5 V | 3 |+| DC Output Voltage (Referenced to GND) (Note 1) | VOUT | -0.5 |  |  | V | Max printed as VCC + 0.5 V; IOUT absolute max must be observed | 3 | | DC Input Diode Current | IIK | -20 |  | 20 | mA |  | 3 | | DC Output Diode Current | IOK | -50 |  | 50 | mA |  | 3 | | DC Output Sink/Source Current | IOUT | -50 |  | 50 | mA |  | 3 |-| DC Supply Current, per Output Pin | ICC | -50 |  | 50 | mA |  | 3 |-| DC Ground Current, per Output Pin | IGND | -100 |  | 100 | mA |  | 3 | | Storage Temperature Range | TSTG | -65 |  | 150 | °C |  | 3 |-| Junction Temperature Under Bias | TJ |  |  | 140 | °C | Under bias | 3 |-| Latchup Performance Above VCC and Below GND | ILatchup | -100 |  | 100 | mA | At 85°C (Note 6) | 3 |-| DC Supply Voltage ′AC | VCC | 2 | 5 | 6 | V | ′AC devices | 3 |-| DC Input Voltage, Output Voltage (Ref. to GND) | VIN, VOUT | 0 |  |  | V | Referenced to GND | 3 |-| Operating Ambient Temperature Range | TA | -40 | 25 | 85 | °C |  | 3 |-| Output Current − High | IOH |  |  | -24 | mA |  | 3 |-| Output Current − Low | IOL |  |  | 24 | mA |  | 3 |-| Minimum High Level Input Voltage | VIH | 2.1 | 1.5 |  | V | VCC = 3.0 V; VOUT = 0.1 V or VCC − 0.1 V; TA −40 to +85°C | 4 |-| Minimum High Level Input Voltage | VIH | 3.15 | 2.25 |  | V | VCC = 4.5 V; VOUT = 0.1 V or VCC − 0.1 V; TA −40 to +85°C | 4 |-| Minimum High Level Input Voltage | VIH | 3.85 | 2.75 |  | V | VCC = 5.5 V; VOUT = 0.1 V or VCC − 0.1 V; TA −40 to +85°C | 4 |-| Maximum Low Level Input Voltage | VIL |  | 1.5 | 0.9 | V | VCC = 3.0 V; VOUT = 0.1 V or VCC − 0.1 V; TA −40 to +85°C | 4 |-| Maximum Low Level Input Voltage | VIL |  | 2.25 | 1.35 | V | VCC = 4.5 V; VOUT = 0.1 V or VCC − 0.1 V; TA −40 to +85°C | 4 |-| Maximum Low Level Input Voltage | VIL |  | 2.75 | 1.65 | V | VCC = 5.5 V; VOUT = 0.1 V or VCC − 0.1 V; TA −40 to +85°C | 4 |-| Minimum High Level Output Voltage | VOH | 2.9 | 2.99 |  | V | VCC = 3.0 V; IOUT = −50 µA; TA −40 to +85°C | 4 |-| Minimum High Level Output Voltage | VOH | 4.4 | 4.49 |  | V | VCC = 4.5 V; IOUT = −50 µA; TA −40 to +85°C | 4 |-| Minimum High Level Output Voltage | VOH | 5.4 | 5.49 |  | V | VCC = 5.5 V; IOUT = −50 µA; TA −40 to +85°C | 4 |-| Minimum High Level Output Voltage | VOH | 2.46 |  |  | V | VCC = 3.0 V; VIN = VIL or VIH; IOH = −12 mA; TA −40 to +85°C | 4 |-| Minimum High Level Output Voltage | VOH | 3.76 |  |  | V | VCC = 4.5 V; VIN = VIL or VIH; IOH = −24 mA; TA −40 to +85°C | 4 |-| Minimum High Level Output Voltage | VOH | 4.76 |  |  | V | VCC = 5.5 V; VIN = VIL or VIH; IOH = −24 mA; TA −40 to +85°C | 4 |-| Maximum Low Level Output Voltage | VOL |  | 0.002 | 0.1 | V | VCC = 3.0 V; IOUT = 50 µA; TA −40 to +85°C | 4 |-| Maximum Low Level Output Voltage | VOL |  | 0.001 | 0.1 | V | VCC = 4.5 V; IOUT = 50 µA; TA −40 to +85°C | 4 |-| Maximum Low Level Output Voltage | VOL |  |  | 0.44 | V | VCC = 3.0 V; VIN = VIL or VIH; IOL = 12 mA; TA −40 to +85°C | 4 |-| Maximum Input Leakage Current | IIN | -1 |  | 1 | µA | VCC = 5.5 V; VI = VCC, GND; TA −40 to +85°C | 4 |-| Maximum 3-State Current | IOZ | -5 |  | 5 | µA | VCC = 5.5 V; VI(OE) = VIL, VIH; VO = VCC, GND; TA −40 to +85°C | 4 |-| Minimum Dynamic Output Current (IOLD) | IOLD |  |  | 75 | mA | VCC = 5.5 V; VOLD = 1.65 V Max | 4 |-| Minimum Dynamic Output Current (IOHD) | IOHD | -75 |  |  | mA | VCC = 5.5 V; VOHD = 3.85 V Min | 4 |-| Maximum Quiescent Supply Current | ICC |  |  | 80 | µA | VCC = 5.5 V; VIN = VCC or GND; TA −40 to +85°C | 4 |-| Propagation Delay Dn to On (tPLH) | tPLH | 2 |  | 15 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-5 | 5 |-| Propagation Delay Dn to On (tPLH) | tPLH | 2 |  | 11.5 | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-5 | 5 |-| Propagation Delay Dn to On (tPHL) | tPHL | 2 |  | 14 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-5 | 5 |-| Propagation Delay Dn to On (tPHL) | tPHL | 2 |  | 11 | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-5 | 5 |-| Propagation Delay LE to On (tPLH) | tPLH | 2 |  | 15 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-6 | 5 |-| Propagation Delay LE to On (tPLH) | tPLH | 2 |  | 11 | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-6 | 5 |-| Propagation Delay LE to On (tPHL) | tPHL | 2 |  | 14 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-6 | 5 |-| Propagation Delay LE to On (tPHL) | tPHL | 2 |  | 10 | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-6 | 5 |-| Output Enable Time (tPZH) | tPZH | 2 |  | 12 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-7 | 5 |-| Output Enable Time (tPZH) | tPZH | 2 |  | 10 | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-7 | 5 |-| Output Enable Time (tPZL) | tPZL | 2 |  | 12.5 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-8 | 5 |-| Output Enable Time (tPZL) | tPZL | 2 |  | 9.5 | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-8 | 5 |-| Output Disable Time (tPHZ) | tPHZ | 2 |  | 13.5 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-7 | 5 |-| Output Disable Time (tPHZ) | tPHZ | 2 |  | 12 | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-7 | 5 |-| Output Disable Time (tPLZ) | tPLZ | 2 |  | 10.5 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-8 | 5 |-| Output Disable Time (tPLZ) | tPLZ | 2 |  | 9 | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-8 | 5 |-| Setup Time, HIGH or LOW Dn to LE | ts | 4 |  |  | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-9 | 5 |-| Setup Time, HIGH or LOW Dn to LE | ts | 3.5 |  |  | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-9 | 5 |-| Hold Time, HIGH or LOW Dn to LE | th | 2 |  |  | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-9 | 5 |-| LE Pulse Width, HIGH | tw | 7 |  |  | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-6 | 5 |-| LE Pulse Width, HIGH | tw | 5 |  |  | ns | VCC = 5.0 V ±0.5 V; CL = 50 pF; TA −40 to +85°C; Fig. 3-6 | 5 |-| Thermal Resistance, Junction-to-Ambient (SOIC) | JA |  | 65.8 |  | °C/W | SOIC package; JESD 51-7 (Note 2) | 3 |+| Lead Temperature | TL |  |  | 260 | °C | 1 mm from case for 10 seconds | 3 |+| Junction Temperature Under Bias | TJ |  |  | 140 | °C |  | 3 |+| Thermal Resistance, junction to ambient (SOIC) | θJA |  | 65.8 |  | °C/W | SOIC package, JESD 51-7 (Note 2) | 3 |+| Minimum High Level Input Voltage, VCC 3.0 V, TA = +25°C | VIH | 2.1 | 1.5 |  | V | TA = +25°C; VOUT = 0.1 V or VCC − 0.1 V | 4 |+| Minimum High Level Input Voltage, VCC 4.5 V, TA = +25°C | VIH | 3.15 | 2.25 |  | V | TA = +25°C; VOUT = 0.1 V or VCC − 0.1 V | 4 |+| Minimum High Level Input Voltage, VCC 5.5 V, TA = +25°C | VIH | 3.85 | 2.75 |  | V | TA = +25°C; VOUT = 0.1 V or VCC − 0.1 V | 4 |+| Minimum High Level Input Voltage, VCC 3.0 V, TA = −40°C to +85°C | VIH | 2.1 |  |  | V | TA = −40°C to +85°C; VOUT = 0.1 V or VCC − 0.1 V | 4 |+| Minimum High Level Input Voltage, VCC 4.5 V, TA = −40°C to +85°C | VIH | 3.15 |  |  | V | TA = −40°C to +85°C; VOUT = 0.1 V or VCC − 0.1 V | 4 |+| Minimum High Level Input Voltage, VCC 5.5 V, TA = −40°C to +85°C | VIH | 3.85 |  |  | V | TA = −40°C to +85°C; VOUT = 0.1 V or VCC − 0.1 V | 4 |+| Maximum Low Level Input Voltage, VCC 3.0 V, TA = +25°C | VIL |  | 1.5 | 0.9 | V | TA = +25°C; VOUT = 0.1 V or VCC − 0.1 V | 4 |+| Maximum Low Level Input Voltage, VCC 4.5 V, TA = +25°C | VIL |  | 2.25 | 1.35 | V | TA = +25°C; VOUT = 0.1 V or VCC − 0.1 V | 4 |+| Maximum Low Level Input Voltage, VCC 5.5 V, TA = +25°C | VIL |  | 2.75 | 1.65 | V | TA = +25°C; VOUT = 0.1 V or VCC − 0.1 V | 4 |+| Maximum Low Level Input Voltage, VCC 3.0 V, TA = −40°C to +85°C | VIL |  |  | 0.9 | V | TA = −40°C to +85°C; VOUT = 0.1 V or VCC − 0.1 V | 4 |+| Maximum Low Level Input Voltage, VCC 4.5 V, TA = −40°C to +85°C | VIL |  |  | 1.35 | V | TA = −40°C to +85°C; VOUT = 0.1 V or VCC − 0.1 V | 4 |+| Maximum Low Level Input Voltage, VCC 5.5 V, TA = −40°C to +85°C | VIL |  |  | 1.65 | V | TA = −40°C to +85°C; VOUT = 0.1 V or VCC − 0.1 V | 4 |+| Minimum High Level Output Voltage, VCC 3.0 V, IOUT = −50 µA, TA = +25°C | VOH | 2.9 | 2.99 |  | V | IOUT = −50 µA | 4 |+| Minimum High Level Output Voltage, VCC 4.5 V, IOUT = −50 µA, TA = +25°C | VOH | 4.4 | 4.49 |  | V | IOUT = −50 µA | 4 |+| Minimum High Level Output Voltage, VCC 5.5 V, IOUT = −50 µA, TA = +25°C | VOH | 5.4 | 5.49 |  | V | IOUT = −50 µA | 4 |+| Minimum High Level Output Voltage, VCC 3.0 V, IOUT = −50 µA, TA = −40°C to +85°C | VOH | 2.9 |  |  | V | IOUT = −50 µA | 4 |+| Minimum High Level Output Voltage, VCC 4.5 V, IOUT = −50 µA, TA = −40°C to +85°C | VOH | 4.4 |  |  | V | IOUT = −50 µA | 4 |+| Minimum High Level Output Voltage, VCC 5.5 V, IOUT = −50 µA, TA = −40°C to +85°C | VOH | 5.4 |  |  | V | IOUT = −50 µA | 4 |+| Minimum High Level Output Voltage, VCC 3.0 V, IOH = −12 mA, TA = +25°C | VOH | 2.56 |  |  | V | VIN = VIL or VIH; IOH = −12 mA | 4 |+| Minimum High Level Output Voltage, VCC 4.5 V, IOH = −24 mA, TA = +25°C | VOH | 3.86 |  |  | V | VIN = VIL or VIH; IOH = −24 mA | 4 |+| Minimum High Level Output Voltage, VCC 5.5 V, IOH = −24 mA, TA = +25°C | VOH | 4.86 |  |  | V | VIN = VIL or VIH; IOH = −24 mA | 4 |+| Minimum High Level Output Voltage, VCC 3.0 V, IOH = −12 mA, TA = −40°C to +85°C | VOH | 2.46 |  |  | V | VIN = VIL or VIH; IOH = −12 mA | 4 |+| Minimum High Level Output Voltage, VCC 4.5 V, IOH = −24 mA, TA = −40°C to +85°C | VOH | 3.76 |  |  | V | VIN = VIL or VIH; IOH = −24 mA | 4 |+| Minimum High Level Output Voltage, VCC 5.5 V, IOH = −24 mA, TA = −40°C to +85°C | VOH | 4.76 |  |  | V | VIN = VIL or VIH; IOH = −24 mA | 4 |+| Maximum Low Level Output Voltage, VCC 3.0 V, IOUT = 50 µA, TA = +25°C | VOL |  | 0.002 | 0.1 | V | IOUT = 50 µA | 4 |+| Maximum Low Level Output Voltage, VCC 4.5 V, IOUT = 50 µA, TA = +25°C | VOL |  | 0.001 | 0.1 | V | IOUT = 50 µA | 4 |+| Maximum Low Level Output Voltage, VCC 5.5 V, IOUT = 50 µA, TA = +25°C | VOL |  | 0.001 | 0.1 | V | IOUT = 50 µA | 4 |+| Maximum Low Level Output Voltage, VCC 3.0 V, IOUT = 50 µA, TA = −40°C to +85°C | VOL |  |  | 0.1 | V | IOUT = 50 µA | 4 |+| Maximum Low Level Output Voltage, VCC 4.5 V, IOUT = 50 µA, TA = −40°C to +85°C | VOL |  |  | 0.1 | V | IOUT = 50 µA | 4 |+| Maximum Low Level Output Voltage, VCC 5.5 V, IOUT = 50 µA, TA = −40°C to +85°C | VOL |  |  | 0.1 | V | IOUT = 50 µA | 4 |+| Maximum Low Level Output Voltage, VCC 3.0 V, IOL = 12 mA, TA = +25°C | VOL |  |  | 0.36 | V | VIN = VIL or VIH; IOL = 12 mA | 4 |+| Maximum Low Level Output Voltage, VCC 4.5 V, IOL = 24 mA, TA = +25°C | VOL |  |  | 0.36 | V | VIN = VIL or VIH; IOL = 24 mA | 4 |+| Maximum Low Level Output Voltage, VCC 5.5 V, IOL = 24 mA, TA = +25°C | VOL |  |  | 0.36 | V | VIN = VIL or VIH; IOL = 24 mA | 4 |+| Maximum Low Level Output Voltage, VCC 3.0 V, IOL = 12 mA, TA = −40°C to +85°C | VOL |  |  | 0.44 | V | VIN = VIL or VIH; IOL = 12 mA | 4 |+| Maximum Low Level Output Voltage, VCC 4.5 V, IOL = 24 mA, TA = −40°C to +85°C | VOL |  |  | 0.44 | V | VIN = VIL or VIH; IOL = 24 mA | 4 |+| Maximum Low Level Output Voltage, VCC 5.5 V, IOL = 24 mA, TA = −40°C to +85°C | VOL |  |  | 0.44 | V | VIN = VIL or VIH; IOL = 24 mA | 4 |+| Maximum Input Leakage Current, VCC 5.5 V, TA = +25°C | IIN | -0.1 |  | 0.1 | µA | VI = VCC, GND | 4 |+| Maximum Input Leakage Current, VCC 5.5 V, TA = −40°C to +85°C | IIN | -1 |  | 1 | µA | VI = VCC, GND | 4 |+| Maximum 3-State Current, VCC 5.5 V, TA = +25°C | IOZ | -0.5 |  | 0.5 | µA | VI (OE) = VIL, VIH; VI = VCC, GND; VO = VCC, GND | 4 |+| Maximum 3-State Current, VCC 5.5 V, TA = −40°C to +85°C | IOZ | -5 |  | 5 | µA | VI (OE) = VIL, VIH; VI = VCC, GND; VO = VCC, GND | 4 |+| Maximum Quiescent Supply Current, VCC 5.5 V, TA = +25°C | ICC |  |  | 8 | µA | VIN = VCC or GND | 4 |+| Maximum Quiescent Supply Current, VCC 5.5 V, TA = −40°C to +85°C | ICC |  |  | 80 | µA | VIN = VCC or GND | 4 |  ## CAD (KiCad official) @@ -112,8 +116,8 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mc74ac573dw-d.pdf) (11 pp, sha256 `215b0647639095c6`, retrieved 2026-11-13, tier: manufacturer)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mc74ac573dw-d.pdf) (11 pp, sha256 `215b0647639095c6`, retrieved 2026-11-18)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/mc74ac573dwg-datasheet.pdf)
mc74ac573dwg-hero.glb
⋯ 1 unchanged line ⋯
mc74ac573dwg-hero.overlay.json+522−527
@@ -1,529 +1,524 @@ {- "spec": "adom-hero 1.4",- "mpn": "MC74AC573DWG",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {-  "pad_outlines": {-   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-   "rgba": [-    0.0,-    0.902,-    0.863,-    0.5-   ],-   "pads": 20,-   "span_mm": 12.03,-   "dash_mm": 0.3008,-   "gap_mm": 0.1804,-   "pad_stroke_mm": 0.0722-  },-  "silkscreen": {-   "material": "Silkscreen reference lines - 30 percent opacity",-   "rgba": [-    0.92,-    0.96,-    1.0,-    0.3-   ],-   "footprint_items": 7,-   "pin1": {-    "source": "footprint silkscreen",-    "pad": "1"-   }-  },-  "signal_names": {-   "material": "Signal names - 50 percent opacity",-   "rgba": [-    0.92,-    0.96,-    1.0,-    0.5-   ],-   "font": "DejaVu Sans Mono",-   "labels": 20,-   "sides": "top + mirrored underside (single-sided)",-   "omitted": null,-   "fallback_to_pad_number": 0-  }- },- "align": {-  "ok": true,-  "board_underside": true,-  "electrical_pads_without_contact": [],-  "mounting_pads_left_out": [],-  "centre_offset_mm": 0.0,-  "over_pads": true,-  "tolerance_mm": 0.962,-  "orientation_flipped": false,-  "contacts_bbox_mm": [-   -5.15,-   5.15,-   -5.92,-   5.92-  ],-  "pads_bbox_mm": [-   -5.675,-   5.675,-   -6.015,-   6.015+  "spec": "adom-hero 1.4",+  "mpn": "MC74AC573DWG",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 20,+      "span_mm": 12.03,+      "dash_mm": 0.3008,+      "gap_mm": 0.1804,+      "pad_stroke_mm": 0.0722+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 7,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 20,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.962,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -5.15,+      5.15,+      -5.92,+      5.92+    ],+    "pads_bbox_mm": [+      -5.675,+      5.675,+      -6.015,+      6.015+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "mc74ac573dwg-etched.glb",+    "glb_sha256": "d28536e84cb6d6aac0cc41ec330a4a22fe6e02e1b73d0deb6d52922373742bed",+    "footprint": "mc74ac573dwg.kicad_mod",+    "footprint_sha256": "9783bc19f518a72442ddbfe6289e767a42c3d23358b65c3447b6a36bdd0e7dcf",+    "pins": "page.json component.pins",+    "pins_sha256": "af63844a1cfdaf8b3b6c8b0b3afcbef15ef8395a3af3d1604eb988a0669d0501"+  },+  "generator": "adom-wiki 1.8.28 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "~{OE}",+      "x": -5.825,+      "y": -5.715,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "D0",+      "x": -5.825,+      "y": -4.445,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "3",+      "text": "D1",+      "x": -5.825,+      "y": -3.175,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "4",+      "text": "D2",+      "x": -5.825,+      "y": -1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "5",+      "text": "D3",+      "x": -5.825,+      "y": -0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "6",+      "text": "D4",+      "x": -5.825,+      "y": 0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "7",+      "text": "D5",+      "x": -5.825,+      "y": 1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "8",+      "text": "D6",+      "x": -5.825,+      "y": 3.175,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "9",+      "text": "D7",+      "x": -5.825,+      "y": 4.445,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "10",+      "text": "GND",+      "x": -5.825,+      "y": 5.715,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "11",+      "text": "LE",+      "x": 5.825,+      "y": 5.715,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "12",+      "text": "O7",+      "x": 5.825,+      "y": 4.445,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "13",+      "text": "O6",+      "x": 5.825,+      "y": 3.175,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "14",+      "text": "O5",+      "x": 5.825,+      "y": 1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "15",+      "text": "O4",+      "x": 5.825,+      "y": 0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "16",+      "text": "O3",+      "x": 5.825,+      "y": -0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "17",+      "text": "O2",+      "x": 5.825,+      "y": -1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "18",+      "text": "O1",+      "x": 5.825,+      "y": -3.175,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "19",+      "text": "O0",+      "x": 5.825,+      "y": -4.445,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "20",+      "text": "VCC",+      "x": 5.825,+      "y": -5.715,+      "align": "left",+      "vertical": false,+      "h": 0.6+    }   ],-  "seating_z_mm": -0.0- },- "sources": {-  "glb": "mc74ac573dwg-etched.glb",-  "glb_sha256": "d28536e84cb6d6aac0cc41ec330a4a22fe6e02e1b73d0deb6d52922373742bed",-  "footprint": "mc74ac573dwg.kicad_mod",-  "footprint_sha256": "9783bc19f518a72442ddbfe6289e767a42c3d23358b65c3447b6a36bdd0e7dcf",-  "pins": "page.json component.pins",-  "pins_sha256": "c1aed3485ab4abb267552e17ebdb95b28e39eb0db1c4533eff420cc89f57de46"- },- "generator": "factory/hero_glb.py",- "labels": [-  {-   "pad": "1",-   "text": "OE",-   "x": -5.825,-   "y": -5.715,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "2",-   "text": "D0",-   "x": -5.825,-   "y": -4.445,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "3",-   "text": "D1",-   "x": -5.825,-   "y": -3.175,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "4",-   "text": "D2",-   "x": -5.825,-   "y": -1.905,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "5",-   "text": "D3",-   "x": -5.825,-   "y": -0.635,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "6",-   "text": "D4",-   "x": -5.825,-   "y": 0.635,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "7",-   "text": "D5",-   "x": -5.825,-   "y": 1.905,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "8",-   "text": "D6",-   "x": -5.825,-   "y": 3.175,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "9",-   "text": "D7",-   "x": -5.825,-   "y": 4.445,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "10",-   "text": "GND",-   "x": -5.825,-   "y": 5.715,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "11",-   "text": "LE",-   "x": 5.825,-   "y": 5.715,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "12",-   "text": "O7",-   "x": 5.825,-   "y": 4.445,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "13",-   "text": "O6",-   "x": 5.825,-   "y": 3.175,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "14",-   "text": "O5",-   "x": 5.825,-   "y": 1.905,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "15",-   "text": "O4",-   "x": 5.825,-   "y": 0.635,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "16",-   "text": "O3",-   "x": 5.825,-   "y": -0.635,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "17",-   "text": "O2",-   "x": 5.825,-   "y": -1.905,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "18",-   "text": "O1",-   "x": 5.825,-   "y": -3.175,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "19",-   "text": "O0",-   "x": 5.825,-   "y": -4.445,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "20",-   "text": "VCC",-   "x": 5.825,-   "y": -5.715,-   "align": "left",-   "vertical": false,-   "h": 0.6-  }- ],- "pads": [-  {-   "number": "1",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -5.715-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "2",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -4.445-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "3",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -3.175-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "4",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -1.905-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "5",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -0.635-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "6",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    0.635-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "7",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    1.905-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "8",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    3.175-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "9",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    4.445-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "10",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    5.715-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "11",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    5.715-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "12",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    4.445-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "13",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    3.175-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "14",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    1.905-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "15",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    0.635-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "16",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -0.635-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "17",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -1.905-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "18",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -3.175-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "19",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -4.445-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "20",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -5.715-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  }- ]-}\ No newline at end of file+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -5.715+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        5.715+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        5.715+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -5.715+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    }+  ]+}
mc74ac573dwg.kicad_sym+1−1
@@ -9,7 +9,7 @@     )     (symbol "MC74AC573DWG_1_1"     (pin input line (at -17.78 10.16 0) (length 5.08)-      (name "OE" (effects (font (size 1.27 1.27))))+      (name "~{OE}" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )     (pin input line (at -17.78 7.62 0) (length 5.08)
mc74ac573dwg.lbr+2−2
@@ -105,7 +105,7 @@   <wire x1="-12.7" y1="-15.24" x2="-12.7" y2="12.7" width="0.254" layer="94"/>   <text x="0.0000" y="15.2400" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="-17.7800" size="1.27" layer="96" align="center">&gt;VALUE</text>-  <pin name="OE" x="-17.78" y="10.16" length="middle" direction="in"/>+  <pin name="!OE!" x="-17.78" y="10.16" length="middle" direction="in"/>   <pin name="D0" x="-17.78" y="7.62" length="middle" direction="in"/>   <pin name="D1" x="-17.78" y="5.08" length="middle" direction="in"/>   <pin name="D2" x="-17.78" y="2.54" length="middle" direction="in"/>@@ -136,7 +136,7 @@   <devices>     <device name="" package="SOIC-20W_7.5x12.8mm_P1.27mm">       <connects>-        <connect gate="G$1" pin="OE" pad="1"/>+        <connect gate="G$1" pin="!OE!" pad="1"/>         <connect gate="G$1" pin="D0" pad="2"/>         <connect gate="G$1" pin="D1" pad="3"/>         <connect gate="G$1" pin="D2" pad="4"/>
package.json+30−44
@@ -1,8 +1,8 @@ {   "slug": "mc74ac573dwg",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",-  "description": "onsemi Latches, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "description": "onsemi Latches, SOIC-20-300mil. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",     "logic ics",@@ -53,7 +53,7 @@       "mouser": "863-MC74AC573DWG"     },     "distributor_check": {-      "checked_at": "2026-11-13T00:17:18Z",+      "checked_at": "2026-11-18T14:17:38Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "MC74AC573DWGOS-ND",@@ -67,147 +67,133 @@     "pins": [       {         "number": "1",-        "name": "OE",+        "name": "~{OE}",         "type": "input",-        "description": "3-State Output Enable Input: when LOW the output buffers are enabled, and when HIGH they are in the high-impedance mode."+        "description": "3-state output enable input; LOW enables the outputs, HIGH puts them in high impedance without interfering with entering new data into the latches."       },       {         "number": "2",         "name": "D0",         "type": "input",-        "description": "Data Input 0: data on this pin enters the latch while LE is HIGH."+        "description": "Data input 0; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE."       },       {         "number": "3",         "name": "D1",         "type": "input",-        "description": "Data Input 1: data on this pin enters the latch while LE is HIGH."+        "description": "Data input 1; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE."       },       {         "number": "4",         "name": "D2",         "type": "input",-        "description": "Data Input 2: data on this pin enters the latch while LE is HIGH."+        "description": "Data input 2; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE."       },       {         "number": "5",         "name": "D3",         "type": "input",-        "description": "Data Input 3: data on this pin enters the latch while LE is HIGH."+        "description": "Data input 3; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE."       },       {         "number": "6",         "name": "D4",         "type": "input",-        "description": "Data Input 4: data on this pin enters the latch while LE is HIGH."+        "description": "Data input 4; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE."       },       {         "number": "7",         "name": "D5",         "type": "input",-        "description": "Data Input 5: data on this pin enters the latch while LE is HIGH."+        "description": "Data input 5; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE."       },       {         "number": "8",         "name": "D6",         "type": "input",-        "description": "Data Input 6: data on this pin enters the latch while LE is HIGH."+        "description": "Data input 6; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE."       },       {         "number": "9",         "name": "D7",         "type": "input",-        "description": "Data Input 7: data on this pin enters the latch while LE is HIGH."+        "description": "Data input 7; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE."       },       {         "number": "10",         "name": "GND",         "type": "power_in",-        "description": "Ground reference for all voltages (VIN, VOUT and VCC are referenced to GND)."+        "description": "Ground reference for the supply, inputs and outputs (0 V)."       },       {         "number": "11",         "name": "LE",         "type": "input",-        "description": "Latch Enable Input: when HIGH the latches are transparent, and when LOW they store the data present at the Dn inputs."+        "description": "Latch Enable input; HIGH makes the latches transparent, LOW stores the data present at Dn."       },       {         "number": "12",         "name": "O7",         "type": "tri_state",-        "description": "3-State Latch Output 7, enabled when OE is LOW and high impedance when OE is HIGH."+        "description": "3-state latch output 7; sources/sinks 24 mA and is high impedance when OE is HIGH."       },       {         "number": "13",         "name": "O6",         "type": "tri_state",-        "description": "3-State Latch Output 6, enabled when OE is LOW and high impedance when OE is HIGH."+        "description": "3-state latch output 6; sources/sinks 24 mA and is high impedance when OE is HIGH."       },       {         "number": "14",         "name": "O5",         "type": "tri_state",-        "description": "3-State Latch Output 5, enabled when OE is LOW and high impedance when OE is HIGH."+        "description": "3-state latch output 5; sources/sinks 24 mA and is high impedance when OE is HIGH."       },       {         "number": "15",         "name": "O4",         "type": "tri_state",-        "description": "3-State Latch Output 4, enabled when OE is LOW and high impedance when OE is HIGH."+        "description": "3-state latch output 4; sources/sinks 24 mA and is high impedance when OE is HIGH."       },       {         "number": "16",         "name": "O3",         "type": "tri_state",-        "description": "3-State Latch Output 3, enabled when OE is LOW and high impedance when OE is HIGH."+        "description": "3-state latch output 3; sources/sinks 24 mA and is high impedance when OE is HIGH."       },       {         "number": "17",         "name": "O2",         "type": "tri_state",-        "description": "3-State Latch Output 2, enabled when OE is LOW and high impedance when OE is HIGH."+        "description": "3-state latch output 2; sources/sinks 24 mA and is high impedance when OE is HIGH."       },       {         "number": "18",         "name": "O1",         "type": "tri_state",-        "description": "3-State Latch Output 1, enabled when OE is LOW and high impedance when OE is HIGH."+        "description": "3-state latch output 1; sources/sinks 24 mA and is high impedance when OE is HIGH."       },       {         "number": "19",         "name": "O0",         "type": "tri_state",-        "description": "3-State Latch Output 0, enabled when OE is LOW and high impedance when OE is HIGH."+        "description": "3-state latch output 0; sources/sinks 24 mA and is high impedance when OE is HIGH."       },       {         "number": "20",         "name": "VCC",         "type": "power_in",-        "description": "Supply voltage: 2.0 V to 6.0 V for 74AC devices and 4.5 V to 5.5 V for 74ACT devices, referenced to GND."+        "description": "Positive supply; recommended 2.0 to 6.0 V for 'AC (4.5 to 5.5 V for 'ACT), absolute maximum -0.5 to +7.0 V."       }     ],     "provenance": {-      "extractor": "extract_pins 0.3",-      "factory_chain": {-        "factory": "2.0.0",-        "extractor": "extract_pins 0.3",-        "primary_model": "claude-haiku-5-5",-        "primary_mode": "text",-        "consensus_model": "claude-sonnet-5-5",-        "consensus": "agreed",-        "guards": "pin_guards 0.1: passed",-        "guard_notes": [-          "extractor flagged: The pin numbers in the extracted Figure 1 text are scrambled, so the number-to-name assignment was r; The datasheet pin-function table lists only D0-D7, LE, OE and O0-O7. GND and VCC are shown in the Fi"-        ],-        "pages_sent": 11,-        "cost_usd": 0.0726,-        "at": "2026-11-13T00:17:06"-      },+      "extractor": "ds2sf",       "datasheet": {         "url": "https://www.onsemi.com/pdf/datasheet/mc74ac573dw-d.pdf",         "pages": 11,         "sha256": "215b0647639095c6",-        "source_tier": "mfr"+        "source_tier": "mfr",+        "citation": "onsemi datasheet"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {@@ -238,7 +224,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",-        "checked": "2026-11-13",+        "checked": "2026-11-18",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -256,8 +242,8 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "45f0040431c05397a8030766a295e42fefd52fa4abf0463f3828e27ff9c2a6a4",-        "checked": "2026-11-13",+        "sha256": "567a550b4cff1651f1ca68c6bb6243dad8f302aff63f347a9868f1d8fbf92ea9",+        "checked": "2026-11-18",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],
page.json+32−44
@@ -4,7 +4,7 @@   "slug": "mc74ac573dwg",   "title": "MC74AC573DWG",   "brief": "onsemi Latches, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.1",+  "version": "0.1.2",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,7 +36,7 @@       "mouser": "863-MC74AC573DWG"     },     "distributor_check": {-      "checked_at": "2026-11-13T00:17:18Z",+      "checked_at": "2026-11-18T14:17:38Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "MC74AC573DWGOS-ND",@@ -50,147 +50,133 @@     "pins": [       {         "number": "1",-        "name": "OE",+        "name": "~{OE}",         "type": "input",-        "description": "3-State Output Enable Input: when LOW the output buffers are enabled, and when HIGH they are in the high-impedance mode."+        "description": "3-state output enable input; LOW enables the outputs, HIGH puts them in high impedance without interfering with entering new data into the latches."       },       {         "number": "2",         "name": "D0",         "type": "input",-        "description": "Data Input 0: data on this pin enters the latch while LE is HIGH."+        "description": "Data input 0; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE."       },       {         "number": "3",         "name": "D1",         "type": "input",-        "description": "Data Input 1: data on this pin enters the latch while LE is HIGH."+        "description": "Data input 1; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE."       },       {         "number": "4",         "name": "D2",         "type": "input",-        "description": "Data Input 2: data on this pin enters the latch while LE is HIGH."+        "description": "Data input 2; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE."       },       {         "number": "5",         "name": "D3",         "type": "input",-        "description": "Data Input 3: data on this pin enters the latch while LE is HIGH."+        "description": "Data input 3; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE."       },       {         "number": "6",         "name": "D4",         "type": "input",-        "description": "Data Input 4: data on this pin enters the latch while LE is HIGH."+        "description": "Data input 4; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE."       },       {         "number": "7",         "name": "D5",         "type": "input",-        "description": "Data Input 5: data on this pin enters the latch while LE is HIGH."+        "description": "Data input 5; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE."       },       {         "number": "8",         "name": "D6",         "type": "input",-        "description": "Data Input 6: data on this pin enters the latch while LE is HIGH."+        "description": "Data input 6; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE."       },       {         "number": "9",         "name": "D7",         "type": "input",-        "description": "Data Input 7: data on this pin enters the latch while LE is HIGH."+        "description": "Data input 7; enters the latch when LE is HIGH and is stored on the HIGH-to-LOW transition of LE."       },       {         "number": "10",         "name": "GND",         "type": "power_in",-        "description": "Ground reference for all voltages (VIN, VOUT and VCC are referenced to GND)."+        "description": "Ground reference for the supply, inputs and outputs (0 V)."       },       {         "number": "11",         "name": "LE",         "type": "input",-        "description": "Latch Enable Input: when HIGH the latches are transparent, and when LOW they store the data present at the Dn inputs."+        "description": "Latch Enable input; HIGH makes the latches transparent, LOW stores the data present at Dn."       },       {         "number": "12",         "name": "O7",         "type": "tri_state",-        "description": "3-State Latch Output 7, enabled when OE is LOW and high impedance when OE is HIGH."+        "description": "3-state latch output 7; sources/sinks 24 mA and is high impedance when OE is HIGH."       },       {         "number": "13",         "name": "O6",         "type": "tri_state",-        "description": "3-State Latch Output 6, enabled when OE is LOW and high impedance when OE is HIGH."+        "description": "3-state latch output 6; sources/sinks 24 mA and is high impedance when OE is HIGH."       },       {         "number": "14",         "name": "O5",         "type": "tri_state",-        "description": "3-State Latch Output 5, enabled when OE is LOW and high impedance when OE is HIGH."+        "description": "3-state latch output 5; sources/sinks 24 mA and is high impedance when OE is HIGH."       },       {         "number": "15",         "name": "O4",         "type": "tri_state",-        "description": "3-State Latch Output 4, enabled when OE is LOW and high impedance when OE is HIGH."+        "description": "3-state latch output 4; sources/sinks 24 mA and is high impedance when OE is HIGH."       },       {         "number": "16",         "name": "O3",         "type": "tri_state",-        "description": "3-State Latch Output 3, enabled when OE is LOW and high impedance when OE is HIGH."+        "description": "3-state latch output 3; sources/sinks 24 mA and is high impedance when OE is HIGH."       },       {         "number": "17",         "name": "O2",         "type": "tri_state",-        "description": "3-State Latch Output 2, enabled when OE is LOW and high impedance when OE is HIGH."+        "description": "3-state latch output 2; sources/sinks 24 mA and is high impedance when OE is HIGH."       },       {         "number": "18",         "name": "O1",         "type": "tri_state",-        "description": "3-State Latch Output 1, enabled when OE is LOW and high impedance when OE is HIGH."+        "description": "3-state latch output 1; sources/sinks 24 mA and is high impedance when OE is HIGH."       },       {         "number": "19",         "name": "O0",         "type": "tri_state",-        "description": "3-State Latch Output 0, enabled when OE is LOW and high impedance when OE is HIGH."+        "description": "3-state latch output 0; sources/sinks 24 mA and is high impedance when OE is HIGH."       },       {         "number": "20",         "name": "VCC",         "type": "power_in",-        "description": "Supply voltage: 2.0 V to 6.0 V for 74AC devices and 4.5 V to 5.5 V for 74ACT devices, referenced to GND."+        "description": "Positive supply; recommended 2.0 to 6.0 V for 'AC (4.5 to 5.5 V for 'ACT), absolute maximum -0.5 to +7.0 V."       }     ],     "provenance": {-      "extractor": "extract_pins 0.3",-      "factory_chain": {-        "factory": "2.0.0",-        "extractor": "extract_pins 0.3",-        "primary_model": "claude-haiku-5-5",-        "primary_mode": "text",-        "consensus_model": "claude-sonnet-5-5",-        "consensus": "agreed",-        "guards": "pin_guards 0.1: passed",-        "guard_notes": [-          "extractor flagged: The pin numbers in the extracted Figure 1 text are scrambled, so the number-to-name assignment was r; The datasheet pin-function table lists only D0-D7, LE, OE and O0-O7. GND and VCC are shown in the Fi"-        ],-        "pages_sent": 11,-        "cost_usd": 0.0726,-        "at": "2026-11-13T00:17:06"-      },+      "extractor": "ds2sf",       "datasheet": {         "url": "https://www.onsemi.com/pdf/datasheet/mc74ac573dw-d.pdf",         "pages": 11,         "sha256": "215b0647639095c6",-        "source_tier": "mfr"+        "source_tier": "mfr",+        "citation": "onsemi datasheet"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {@@ -221,7 +207,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",-        "checked": "2026-11-13",+        "checked": "2026-11-18",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -239,8 +225,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "45f0040431c05397a8030766a295e42fefd52fa4abf0463f3828e27ff9c2a6a4",-        "checked": "2026-11-13",+        "sha256": "567a550b4cff1651f1ca68c6bb6243dad8f302aff63f347a9868f1d8fbf92ea9",+        "checked": "2026-11-18",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -1018,5 +1004,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "onsemi Latches, SOIC-20-300mil. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file