← Commit history
page.json+8−5@@ -32,25 +32,25 @@ "number": "1", "name": "GND/Adj", "type": "input",- "description": "Ground pin for fixed-output versions, or Adjust feedback pin for the adjustable version. On the adjustable variant, the regulator servos this pin to be 1.25 V (VRef) below Vout via an external resistor divider; adjust-pin bias current IAdj is typically <120 \u00b5A."+ "description": "Ground pin for fixed-output versions, or Adjust feedback pin for the adjustable version. On the adjustable variant, the regulator servos this pin to be 1.25 V (VRef) below Vout via an external resistor divider; adjust-pin bias current IAdj is typically <120 µA." }, { "number": "2", "name": "Vout", "type": "power_out",- "description": "Regulated output. Requires an external output capacitor \u226510 \u00b5F (ESR 0.2-10 \u03a9) for stability. Delivers >800 mA with typical 1.0 V dropout; internally current-limited (~800 mA) and thermally protected (~170 \u00b0C shutdown)."+ "description": "Regulated output. Requires an external output capacitor ≥10 µF (ESR 0.2-10 Ω) for stability. Delivers >800 mA with typical 1.0 V dropout; internally current-limited (~800 mA) and thermally protected (~170 °C shutdown)." }, { "number": "3", "name": "Vin", "type": "power_in",- "description": "Unregulated positive supply input, absolute max 20 V. Recommended input bypass capacitor (0.33 \u00b5F tantalum/ceramic or larger) is advised for transient response and when long supply leads are used."+ "description": "Unregulated positive supply input, absolute max 20 V. Recommended input bypass capacitor (0.33 µF tantalum/ceramic or larger) is advised for transient response and when long supply leads are used." }, { "number": "4", "name": "Vout (Tab)", "type": "power_out",- "description": "Exposed heatsink tab on the DPAK package, internally bonded to Pin 2 (Vout). Solder to a copper heatspreader for thermal dissipation; \u03b8JC = 6.0 \u00b0C/W, \u03b8JA down to ~50 \u00b0C/W with adequate copper."+ "description": "Exposed heatsink tab on the DPAK package, internally bonded to Pin 2 (Vout). Solder to a copper heatspreader for thermal dissipation; θJC = 6.0 °C/W, θJA down to ~50 °C/W with adequate copper." } ], "provenance": {@@ -188,5 +188,8 @@ "docs/mc33269dtrkg-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }