mc33201dr2g

@@ -31,5 +31,79 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "MC33201DR2G",+    "manufacturer": "onsemi",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Operational Amplifier",+    "datasheet": "https://www.onsemi.com/pdf/datasheet/mc33201-d.pdf",+    "parts": {+      "symbol": "mc33201dr2g.kicad_sym",+      "footprint": "mc33201dr2g.kicad_mod",+      "model_3d": "mc33201dr2g-etched.glb",+      "model_3d_plain": "mc33201dr2g.glb",+      "model_3d_step": "mc33201dr2g-etched.step",+      "model_3d_step_plain": "mc33201dr2g.step",+      "lbr": "mc33201dr2g.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection. Leave floating or tie to a convenient net; not internally bonded."+      },+      {+        "number": "2",+        "name": "IN-",+        "type": "input",+        "description": "Inverting input of the op-amp. Common-mode range extends rail-to-rail (VEE to VCC). Do not exceed either supply rail by more than 500 mV; differential input voltage is internally clamped by back-to-back diodes, so use series current-limit resistors for large differential drive."+      },+      {+        "number": "3",+        "name": "IN+",+        "type": "input",+        "description": "Non-inverting input of the op-amp. Rail-to-rail common-mode range (VEE to VCC); typical input bias current 80 nA. Differential input resistance ≈ 200 kΩ, differential input capacitance ≈ 8 pF."+      },+      {+        "number": "4",+        "name": "VEE",+        "type": "power_in",+        "description": "Negative supply rail (or ground in single-supply operation). Total supply (VCC - VEE) must not exceed +13 V absolute max; guaranteed operation from 1.8 V up to 12 V total supply."+      },+      {+        "number": "5",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection. Not internally bonded; may be left floating."+      },+      {+        "number": "6",+        "name": "OUT",+        "type": "output",+        "description": "Op-amp output. Rail-to-rail swing within 50 mV of each supply (RL = 10 kΩ); short-circuit current typically 80 mA (source/sink). Capable of driving 600 Ω loads; open-loop output impedance ≈ 100 Ω at 2 MHz, AV = 10."+      },+      {+        "number": "7",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply rail. Operating range from +1.8 V (to ground) up to +12 V (to ground); absolute maximum VCC-VEE = +13 V. Typical supply current per amplifier = 0.9 mA (max 1.125 mA)."+      },+      {+        "number": "8",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection. Not internally bonded; may be left floating."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}