mc33079dt

@@ -33,5 +33,115 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "MC33079DT",+    "manufacturer": "STMicroelectronics",+    "package": "SOIC-14",+    "pin_count": 14,+    "category": "Operational Amplifier",+    "datasheet": "https://www.st.com/resource/en/datasheet/mc33079dt.pdf",+    "parts": {+      "symbol": "mc33079dt.kicad_sym",+      "footprint": "mc33079dt.kicad_mod",+      "model_3d": "mc33079dt-etched.glb",+      "model_3d_plain": "mc33079dt.glb",+      "model_3d_step": "mc33079dt-etched.step",+      "model_3d_step_plain": "mc33079dt.step",+      "lbr": "mc33079dt.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "OUT1",+        "type": "output",+        "description": "Output of op-amp channel 1. Class-AB output stage delivering symmetrical source/sink currents (~29 mA source, ~37 mA typ sink) into loads down to 600 Ω; output impedance ~37 Ω at 9 MHz."+      },+      {+        "number": "2",+        "name": "IN1-",+        "type": "input",+        "description": "Inverting input of op-amp channel 1. High-impedance BJT input (Ri ~175 kΩ, Ci ~12 pF) with typical bias current 250 nA; input voltage must not exceed ±15 V or|VCC|."+      },+      {+        "number": "3",+        "name": "IN1+",+        "type": "input",+        "description": "Non-inverting input of op-amp channel 1. High-impedance BJT input (Ri ~175 kΩ, Ci ~12 pF); common-mode range typically ±13 V to ±14 V on ±15 V supplies."+      },+      {+        "number": "4",+        "name": "VCC+",+        "type": "power_in",+        "description": "Positive supply rail. Accepts ±2.5 V to ±15 V dual supply or up to +36 V single supply; absolute maximum ±18 V or +36 V. Typical total quiescent current 8 mA (10 mA max) for all four amplifiers."+      },+      {+        "number": "5",+        "name": "IN2+",+        "type": "input",+        "description": "Non-inverting input of op-amp channel 2. High-impedance BJT input (Ri ~175 kΩ, Ci ~12 pF); common-mode range typically ±13 V to ±14 V on ±15 V supplies."+      },+      {+        "number": "6",+        "name": "IN2-",+        "type": "input",+        "description": "Inverting input of op-amp channel 2. High-impedance BJT input with typical bias current 250 nA; input voltage must not exceed ±15 V or|VCC|."+      },+      {+        "number": "7",+        "name": "OUT2",+        "type": "output",+        "description": "Output of op-amp channel 2. Class-AB output stage, short-circuit protected with infinite short-circuit duration (subject to junction temperature limits)."+      },+      {+        "number": "8",+        "name": "OUT3",+        "type": "output",+        "description": "Output of op-amp channel 3. Class-AB output stage delivering large symmetric swing (+14.3 V / -14.6 V typ into 10 kΩ)."+      },+      {+        "number": "9",+        "name": "IN3-",+        "type": "input",+        "description": "Inverting input of op-amp channel 3. High-impedance BJT input (Ri ~175 kΩ, Ci ~12 pF)."+      },+      {+        "number": "10",+        "name": "IN3+",+        "type": "input",+        "description": "Non-inverting input of op-amp channel 3. High-impedance BJT input; common-mode range ±13 V to ±14 V on ±15 V supplies."+      },+      {+        "number": "11",+        "name": "VCC-",+        "type": "power_in",+        "description": "Negative supply rail. Typically −15 V in dual-supply operation or GND in single-supply operation; absolute maximum −18 V (or 0 V for +36 V single-supply use)."+      },+      {+        "number": "12",+        "name": "IN4+",+        "type": "input",+        "description": "Non-inverting input of op-amp channel 4. High-impedance BJT input; common-mode range ±13 V to ±14 V on ±15 V supplies."+      },+      {+        "number": "13",+        "name": "IN4-",+        "type": "input",+        "description": "Inverting input of op-amp channel 4. High-impedance BJT input (Ri ~175 kΩ, Ci ~12 pF)."+      },+      {+        "number": "14",+        "name": "OUT4",+        "type": "output",+        "description": "Output of op-amp channel 4. Class-AB output stage with excellent channel-to-channel isolation (120 dB channel separation, 20 Hz-20 kHz)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}