← Commit history

Initial commit: component/mc33035dwr2g

Ray ·0d9f34b4fa ·
2 files changed +299
README.mdadded+60
@@ -0,0 +1,60 @@+# MC33035DWR2G++**onsemi** · Brushless DC (BLDC) Motor Driver · SOIC-24-300mil++MC33035DWR2G from onsemi, in a SOIC-24-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BT | output | Top Drive output, open collector, 50 mA sink current, minimum 30 V breakdown rating. |+| 2 | AT | output | Top Drive output, open collector, 50 mA sink current, minimum 30 V breakdown rating. |+| 3 | Fwd/Rev | input | Forward/Reverse logic input that reverses motor direction by exchanging top and bottom drive output states. |+| 4 | SA | input | Rotor position sensor input for three-phase commutation, TTL compatible with 2.2 V threshold. |+| 5 | SB | input | Rotor position sensor input for three-phase commutation, TTL compatible with 2.2 V threshold. |+| 6 | SC | input | Rotor position sensor input for three-phase commutation, TTL compatible with 2.2 V threshold. |+| 7 | Output Enable | input | Logic input enabling motor operation when high, forcing coast condition and Fault output activation when low. |+| 8 | Vref | output | Reference output, 6.25 V nominal, temperature-compensated, capable of supplying 20 mA sensor power current. |+| 9 | Current Sense Noninverting | input | Current sense non-inverting input with 100 mV threshold relative to Pin 15 that terminates output switch conduction. |+| 10 | Oscillator | output | Oscillator timing node where internal discharge transistor discharges timing capacitor CT at programmed 20-30 kHz frequency. |+| 11 | Error Amp Noninverting | input | Error amplifier non-inverting input, typically connected to speed set potentiometer for closed-loop speed control. |+| 12 | Error Amp Inverting | input | Error amplifier inverting input, typically connected to Pin 13 output for unity-gain closed-loop configuration. |+| 13 | Error Amp Out/PWM | output | Error amplifier output and PWM input providing pulse width modulation reference for motor speed control. |+| 14 | Fault Output | output | Open collector Fault output, active low, 16 mA sink current, activated by invalid sensor, overcurrent, UVLO, or thermal shutdown. |+| 15 | Current Sense Inverting | input | Current sense inverting reference input for 100 mV threshold, typically connected to bottom side of current sense resistor. |+| 16 | Gnd | power_in | Control circuit ground return that must reference separately from high-current power grounds to input source ground. |+| 17 | VCC | power_in | Control supply input, functional over 10 to 30 V range with 8.9 V turn-on UVLO threshold. |+| 18 | VC | power_in | Bottom drive supply input setting high-state voltage of bottom drive outputs, operational over 10 to 30 V with 8.9 V UVLO. |+| 19 | CB | output | Bottom drive output C, totem pole configuration, 100 mA source/sink capability for direct MOSFET or transistor gate drive. |+| 20 | BB | output | Bottom drive output B, totem pole configuration, 100 mA source/sink capability for direct MOSFET or transistor gate drive. |+| 21 | AB | output | Bottom drive output A, totem pole configuration, 100 mA source/sink capability for direct MOSFET or transistor gate drive. |+| 22 | 60°/120° Select | input | Logic input selecting sensor electrical phasing: high for 60° configuration, low for 120° sensor phasing configuration. |+| 23 | Brake | input | Brake logic input that when high disables top drives and enables all bottom drives for dynamic motor braking. |+| 24 | CT | output | Top Drive output, open collector, 50 mA sink current, minimum 30 V breakdown rating. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | onsemi |+| Package | SOIC-24-300mil |+| Category | Motor Driver ICs |+| Pins | 24 |++## CAD (KiCad official)++- Symbol: `MC33035DWR2G`+- Footprint: `Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm`+- 3D model: SOIC-24-300mil (KiCad packages3D, STEP)+- 3D model files: `mc33035dwr2g-etched.step` / `mc33035dwr2g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mc33035dwr2g.step` / `mc33035dwr2g.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [onsemi datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884392307122176) (30 pp, sha256 `7f36160e4fe026b9`, retrieved 2026-09-29, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mc33035dwr2g-datasheet.pdf)
page.jsonadded+239
@@ -0,0 +1,239 @@+{+  "slug": "mc33035dwr2g",+  "version": "0.1.0",+  "type": "component",+  "description": "onsemi Brushless DC (BLDC) Motor Driver, SOIC-24-300mil. Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "motor driver ics",+    "mc33035dwr2g",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "mc33035dwr2g.kicad_sym",+    "mc33035dwr2g.kicad_mod",+    "mc33035dwr2g.glb",+    "mc33035dwr2g.step",+    "mc33035dwr2g.lbr",+    "docs/hero.png",+    "docs/mc33035dwr2g-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "MC33035DWR2G",+    "manufacturer": "onsemi",+    "package": "SOIC-24-300mil",+    "pin_count": 24,+    "category": "Motor Driver ICs",+    "subcategory": "Brushless DC (BLDC) Motor Driver",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884392307122176",+    "parts": {+      "symbol": "mc33035dwr2g.kicad_sym",+      "footprint": "mc33035dwr2g.kicad_mod",+      "model_3d": "mc33035dwr2g-etched.glb",+      "model_3d_plain": "mc33035dwr2g.glb",+      "model_3d_step": "mc33035dwr2g-etched.step",+      "model_3d_step_plain": "mc33035dwr2g.step",+      "lbr": "mc33035dwr2g.lbr"+    },+    "distributor_links": {+      "lcsc": "C424244",+      "digikey": "MC33035DWR2GOSTR-ND",+      "mouser": "863-MC33035DWR2G"+    },+    "distributor_check": {+      "checked_at": "2026-09-29T17:04:00Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "MC33035DWR2GOSTR-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "863-MC33035DWR2G",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "BT",+        "type": "output",+        "description": "Top Drive output, open collector, 50 mA sink current, minimum 30 V breakdown rating."+      },+      {+        "number": "2",+        "name": "AT",+        "type": "output",+        "description": "Top Drive output, open collector, 50 mA sink current, minimum 30 V breakdown rating."+      },+      {+        "number": "3",+        "name": "Fwd/Rev",+        "type": "input",+        "description": "Forward/Reverse logic input that reverses motor direction by exchanging top and bottom drive output states."+      },+      {+        "number": "4",+        "name": "SA",+        "type": "input",+        "description": "Rotor position sensor input for three-phase commutation, TTL compatible with 2.2 V threshold."+      },+      {+        "number": "5",+        "name": "SB",+        "type": "input",+        "description": "Rotor position sensor input for three-phase commutation, TTL compatible with 2.2 V threshold."+      },+      {+        "number": "6",+        "name": "SC",+        "type": "input",+        "description": "Rotor position sensor input for three-phase commutation, TTL compatible with 2.2 V threshold."+      },+      {+        "number": "7",+        "name": "Output Enable",+        "type": "input",+        "description": "Logic input enabling motor operation when high, forcing coast condition and Fault output activation when low."+      },+      {+        "number": "8",+        "name": "Vref",+        "type": "output",+        "description": "Reference output, 6.25 V nominal, temperature-compensated, capable of supplying 20 mA sensor power current."+      },+      {+        "number": "9",+        "name": "Current Sense Noninverting",+        "type": "input",+        "description": "Current sense non-inverting input with 100 mV threshold relative to Pin 15 that terminates output switch conduction."+      },+      {+        "number": "10",+        "name": "Oscillator",+        "type": "output",+        "description": "Oscillator timing node where internal discharge transistor discharges timing capacitor CT at programmed 20-30 kHz frequency."+      },+      {+        "number": "11",+        "name": "Error Amp Noninverting",+        "type": "input",+        "description": "Error amplifier non-inverting input, typically connected to speed set potentiometer for closed-loop speed control."+      },+      {+        "number": "12",+        "name": "Error Amp Inverting",+        "type": "input",+        "description": "Error amplifier inverting input, typically connected to Pin 13 output for unity-gain closed-loop configuration."+      },+      {+        "number": "13",+        "name": "Error Amp Out/PWM",+        "type": "output",+        "description": "Error amplifier output and PWM input providing pulse width modulation reference for motor speed control."+      },+      {+        "number": "14",+        "name": "Fault Output",+        "type": "output",+        "description": "Open collector Fault output, active low, 16 mA sink current, activated by invalid sensor, overcurrent, UVLO, or thermal shutdown."+      },+      {+        "number": "15",+        "name": "Current Sense Inverting",+        "type": "input",+        "description": "Current sense inverting reference input for 100 mV threshold, typically connected to bottom side of current sense resistor."+      },+      {+        "number": "16",+        "name": "Gnd",+        "type": "power_in",+        "description": "Control circuit ground return that must reference separately from high-current power grounds to input source ground."+      },+      {+        "number": "17",+        "name": "VCC",+        "type": "power_in",+        "description": "Control supply input, functional over 10 to 30 V range with 8.9 V turn-on UVLO threshold."+      },+      {+        "number": "18",+        "name": "VC",+        "type": "power_in",+        "description": "Bottom drive supply input setting high-state voltage of bottom drive outputs, operational over 10 to 30 V with 8.9 V UVLO."+      },+      {+        "number": "19",+        "name": "CB",+        "type": "output",+        "description": "Bottom drive output C, totem pole configuration, 100 mA source/sink capability for direct MOSFET or transistor gate drive."+      },+      {+        "number": "20",+        "name": "BB",+        "type": "output",+        "description": "Bottom drive output B, totem pole configuration, 100 mA source/sink capability for direct MOSFET or transistor gate drive."+      },+      {+        "number": "21",+        "name": "AB",+        "type": "output",+        "description": "Bottom drive output A, totem pole configuration, 100 mA source/sink capability for direct MOSFET or transistor gate drive."+      },+      {+        "number": "22",+        "name": "60°/120° Select",+        "type": "input",+        "description": "Logic input selecting sensor electrical phasing: high for 60° configuration, low for 120° sensor phasing configuration."+      },+      {+        "number": "23",+        "name": "Brake",+        "type": "input",+        "description": "Brake logic input that when high disables top drives and enables all bottom drives for dynamic motor braking."+      },+      {+        "number": "24",+        "name": "CT",+        "type": "output",+        "description": "Top Drive output, open collector, 50 mA sink current, minimum 30 V breakdown rating."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884392307122176",+        "pages": 30,+        "sha256": "7f36160e4fe026b9",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 24,+        "described": 24,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file