← Commit history
README.mdadded+60@@ -0,0 +1,60 @@+# MC11S++**Mysentech** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · QFN-16(3x3)++MC11S from Mysentech, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SCL | input | I2C serial clock input. Standard mode up to 400 kHz, fast mode up to 1000 kHz. Requires an external pull-up resistor to VDD. |+| 2 | SDA | bidirectional | I2C serial data line (bidirectional, open-drain). Requires an external pull-up resistor to VDD. |+| 3 | CLKIN | input | External counter clock input, 0.1 MHz to 50 MHz with 40-60% duty cycle. Tie to GND when the internal 2.4 MHz clock is selected via REF_CLK_SEL. |+| 4 | ADDR | input | I2C slave address select input. Ties the device address to one of the supported values depending on the logic level applied. |+| 5 | INTB | output | Interrupt / alert output, active low. Signals conversion-complete or alarm status depending on configuration. |+| 6 | SD | input | Shutdown-mode enable input. Tie to GND when not used; drive high to force the chip into shutdown for lowest current (~40 nA). |+| 7 | VDD | power_in | Supply voltage, 2.0 V to 5.5 V (absolute max 5.5 V). Typical measurement peak current 0.8 mA, average 2.6 µA @ 1 Hz sample rate. |+| 8 | GND | power_in | Device ground reference. |+| 9 | NC | unconnected | No connection. Leave floating. |+| 10 | NC | unconnected | No connection. Leave floating. |+| 11 | NC | unconnected | No connection. Leave floating. |+| 12 | VT | output | Analog negative-temperature-coefficient voltage output. Read externally by MCU ADC to derive die temperature for temperature compensation. |+| 13 | C1N | passive | Channel 1 differential capacitive sense input (negative). Connects to the reference/second sensing capacitor; measures up to 1000 pF, driver current up to 3.2 mA per channel. |+| 14 | C1P | passive | Channel 1 differential capacitive sense input (positive). Paired with C1N; typically used for the reference capacitor in differential mode. |+| 15 | C0P | passive | Channel 0 differential capacitive sense input (positive). Paired with C0N; typically used for the sensed (DUT) capacitor. |+| 16 | C0N | passive | Channel 0 differential capacitive sense input (negative). Paired with C0P for the sensed capacitor connection. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Mysentech |+| Package | QFN-16(3x3) |+| Category | PMIC |+| Pins | 16 |++## Ordering variants++Same part, different packaging or reel option.++- `MC11S`+- `MC11T`+- `MC11L`++## CAD (KiCad official)++- Symbol: `MC11S`+- Footprint: `Package_DFN_QFN:MPS_QFN-16_3x3mm_P0.5mm`+- 3D model: QFN-16(3x3) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Mysentech datasheet](docs/mc11s-datasheet.pdf) (33 pp, sha256 `a3d0a31e473acd20`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mc11s-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "mc11s",+ "version": "0.1.0",+ "type": "component",+ "description": "Mysentech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, QFN-16(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "mc11s"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "mc11s.kicad_sym",+ "mc11s.kicad_mod",+ "mc11s.glb",+ "mc11s.step",+ "mc11s.lbr",+ "docs/hero.png",+ "docs/mc11s-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}