← Commit history

mbi5035gp-b: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·16a5b25eae · ·parent ddc3053
1 file changed +170−1
page.json+170−1
@@ -33,5 +33,174 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "MBI5035GP-B",+    "manufacturer": "MBI",+    "package": "SSOP-24-150mil",+    "pin_count": 24,+    "category": "LED Drivers",+    "parts": {+      "symbol": "mbi5035gp-b.kicad_sym",+      "footprint": "mbi5035gp-b.kicad_mod",+      "model_3d": "mbi5035gp-b-etched.glb",+      "model_3d_plain": "mbi5035gp-b.glb",+      "model_3d_step": "mbi5035gp-b-etched.step",+      "model_3d_step_plain": "mbi5035gp-b.step",+      "lbr": "mbi5035gp-b.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground terminal for control logic and the constant-current sink outputs. Tie to system 0 V; carries up to 800 mA (I_GND max) when all 16 channels are conducting."+      },+      {+        "number": "2",+        "name": "SDI",+        "type": "input",+        "description": "Serial-data input to the 16-bit shift register. Schmitt-trigger CMOS input; data is clocked in on the rising edge of CLK (t_su(D) ≥ 3 ns, t_h(D) ≥ 5 ns). V_IH ≥ 0.7·V_DD, V_IL ≤ 0.3·V_DD."+      },+      {+        "number": "3",+        "name": "CLK",+        "type": "input",+        "description": "Shift-register clock input. Data on SDI is sampled on the rising edge of CLK; f_CLK up to 25 MHz at V_DD = 5 V (20 MHz at 3.3 V). Schmitt-trigger CMOS input."+      },+      {+        "number": "4",+        "name": "LE",+        "type": "input",+        "description": "Latch-enable (data strobe) input. Shift-register data is transferred to the output latch while LE is high and held when LE goes low. Internally pulled down (R_IN(down) ≈ 500 kΩ typ, 250 kΩ - 800 kΩ)."+      },+      {+        "number": "5",+        "name": "OUT0",+        "type": "output",+        "description": "Constant-current LED sink output, channel 0 (open-drain). Programmable 3-45 mA at V_DD = 5 V (3-30 mA at 3.3 V) via R-EXT. Sustains up to 17 V at V_DS with low knee voltage (0.2 V typ @ 20 mA)."+      },+      {+        "number": "6",+        "name": "OUT1",+        "type": "output",+        "description": "Constant-current LED sink output, channel 1. Same electrical spec as OUT0; staggered ~5 ns after even channels to reduce peak supply current."+      },+      {+        "number": "7",+        "name": "OUT2",+        "type": "output",+        "description": "Constant-current LED sink output, channel 2. Same spec as OUT0 (3-45 mA @ V_DD=5V, V_DS ≤ 17 V)."+      },+      {+        "number": "8",+        "name": "OUT3",+        "type": "output",+        "description": "Constant-current LED sink output, channel 3. Same spec as OUT0."+      },+      {+        "number": "9",+        "name": "OUT4",+        "type": "output",+        "description": "Constant-current LED sink output, channel 4. Same spec as OUT0."+      },+      {+        "number": "10",+        "name": "OUT5",+        "type": "output",+        "description": "Constant-current LED sink output, channel 5. Same spec as OUT0."+      },+      {+        "number": "11",+        "name": "OUT6",+        "type": "output",+        "description": "Constant-current LED sink output, channel 6. Same spec as OUT0."+      },+      {+        "number": "12",+        "name": "OUT7",+        "type": "output",+        "description": "Constant-current LED sink output, channel 7. Same spec as OUT0."+      },+      {+        "number": "13",+        "name": "OUT8",+        "type": "output",+        "description": "Constant-current LED sink output, channel 8. Same spec as OUT0."+      },+      {+        "number": "14",+        "name": "OUT9",+        "type": "output",+        "description": "Constant-current LED sink output, channel 9. Same spec as OUT0."+      },+      {+        "number": "15",+        "name": "OUT10",+        "type": "output",+        "description": "Constant-current LED sink output, channel 10. Same spec as OUT0."+      },+      {+        "number": "16",+        "name": "OUT11",+        "type": "output",+        "description": "Constant-current LED sink output, channel 11. Same spec as OUT0."+      },+      {+        "number": "17",+        "name": "OUT12",+        "type": "output",+        "description": "Constant-current LED sink output, channel 12. Same spec as OUT0."+      },+      {+        "number": "18",+        "name": "OUT13",+        "type": "output",+        "description": "Constant-current LED sink output, channel 13. Same spec as OUT0."+      },+      {+        "number": "19",+        "name": "OUT14",+        "type": "output",+        "description": "Constant-current LED sink output, channel 14. Same spec as OUT0."+      },+      {+        "number": "20",+        "name": "OUT15",+        "type": "output",+        "description": "Constant-current LED sink output, channel 15. Same spec as OUT0."+      },+      {+        "number": "21",+        "name": "/OE",+        "type": "input",+        "description": "Active-low output enable. When /OE is low, all 16 constant-current output drivers are enabled; when high, all outputs are turned off (blanked). Internally pulled up (R_IN(up) ≈ 500 kΩ typ, 250 kΩ - 800 kΩ), so the outputs default to OFF if the pin is left floating."+      },+      {+        "number": "22",+        "name": "SDO",+        "type": "output",+        "description": "Serial-data output - feeds the SDI of the next cascaded driver. Push-pull CMOS output (V_OH ≥ V_DD-0.4 V @ -1 mA, V_OL ≤ 0.4 V @ 1 mA). SDO updates on the rising edge of CLK."+      },+      {+        "number": "23",+        "name": "R-EXT",+        "type": "passive",+        "description": "External reference-resistor terminal. A resistor (R_ext) from this pin to GND sets the constant output current for all 16 channels: I_OUT = (V_R-EXT/R_ext)·15 with V_R-EXT = 1.24 V (e.g. 930 Ω → ~20 mA, 1860 Ω → ~10 mA)."+      },+      {+        "number": "24",+        "name": "VDD",+        "type": "power_in",+        "description": "Logic supply, 3.0-3.6 V or 4.5-5.5 V (nominal 3.3 V / 5.0 V). Decouple to GND with a 100 nF ceramic close to the pin plus a bulk capacitor (22 µF typ). Absolute maximum 7 V."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}