← Commit history
mbd9g101g-tr: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+62−1
page.json+62−1@@ -33,5 +33,66 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "MBD9G101G-TR",+ "manufacturer": "MSKSEMI",+ "package": "SOT-23-6",+ "pin_count": 6,+ "category": "DC-DC Converters",+ "parts": {+ "symbol": "mbd9g101g-tr.kicad_sym",+ "footprint": "mbd9g101g-tr.kicad_mod",+ "model_3d": "mbd9g101g-tr-etched.glb",+ "model_3d_plain": "mbd9g101g-tr.glb",+ "model_3d_step": "mbd9g101g-tr-etched.step",+ "model_3d_step_plain": "mbd9g101g-tr.step",+ "lbr": "mbd9g101g-tr.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "BST",+ "type": "passive",+ "description": "Bootstrap pin. A capacitor connected between SW and BST forms a floating supply for the high-side switch driver. BST voltage rating: (Vsw-0.3) to (Vsw+5V)."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference pin for the device. Connect to the system ground plane."+ },+ {+ "number": "3",+ "name": "FB",+ "type": "input",+ "description": "Adjustable version feedback input. Connect FB to the center point of the external resistor divider from VOUT to GND. Internal feedback reference is 0.795 V typical; FB absolute maximum -0.3 V to 6 V."+ },+ {+ "number": "4",+ "name": "EN",+ "type": "input",+ "description": "Enable input. Drive to a logic-high (rising threshold 3.0 V typ) to enable the IC. Drive to a logic-low (falling threshold 0.6 V typ) to disable the IC and enter micro-power shutdown mode. Absolute maximum -0.3 V to 50 V."+ },+ {+ "number": "5",+ "name": "IN",+ "type": "power_in",+ "description": "Power supply input pin. Operating range 4.5 V to 50 V (55 V max operating, 60 V transient). Bypass close to pin with a low-ESR ceramic capacitor (recommended 22 uF + 0.1 uF)."+ },+ {+ "number": "6",+ "name": "SW",+ "type": "output",+ "description": "Switching node. Internal high-side power MOSFET drain (900 mΩ RDS(ON)); connect to the external inductor and freewheel/Schottky diode. SW voltage rating -0.3 V to (VIN + 0.5 V)."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}