← Commit history

Set visibility: public

Ray ·87a0ab5330 · ·parent 5149991
1 file changed +9−6
page.json+9−6
@@ -38,31 +38,31 @@         "number": "1",         "name": "RESET",         "type": "output",-        "description": "Active-low reset output (push-pull); asserts low when VCC falls below the 2.93V threshold or MR is driven low, remains asserted for 200ms (typ, 140ms min) after VCC recovers; VOL \u2264 0.3V at ISINK = 1.2mA, VOH \u2265 0.8\u00d7VCC at ISOURCE = 30\u00b5A, guaranteed valid to VCC = 1V; ISOURCE short-circuit max 400\u00b5A."+        "description": "Active-low reset output (push-pull); asserts low when VCC falls below the 2.93V threshold or MR is driven low, remains asserted for 200ms (typ, 140ms min) after VCC recovers; VOL ≤ 0.3V at ISINK = 1.2mA, VOH ≥ 0.8×VCC at ISOURCE = 30µA, guaranteed valid to VCC = 1V; ISOURCE short-circuit max 400µA."       },       {         "number": "2",         "name": "GND",         "type": "power_in",-        "description": "Ground; all voltages referenced to this pin; supply current 5\u00b5A (typ), 12\u00b5A (max) for MAX823S in SOT23 with WDI and MR unconnected."+        "description": "Ground; all voltages referenced to this pin; supply current 5µA (typ), 12µA (max) for MAX823S in SOT23 with WDI and MR unconnected."       },       {         "number": "3",         "name": "MR",         "type": "input",-        "description": "Active-low manual reset input with internal 35-75k\u03a9 (typ 52k\u03a9) pullup to VCC; VIL \u2264 0.3\u00d7VCC, VIH \u2265 0.7\u00d7VCC; asserts RESET while held low and for 200ms after returning high; MR pulse width \u2265 1\u00b5s required; noise-immune to pulses \u2264 100ns; leave open or connect to VCC if unused."+        "description": "Active-low manual reset input with internal 35-75kΩ (typ 52kΩ) pullup to VCC; VIL ≤ 0.3×VCC, VIH ≥ 0.7×VCC; asserts RESET while held low and for 200ms after returning high; MR pulse width ≥ 1µs required; noise-immune to pulses ≤ 100ns; leave open or connect to VCC if unused."       },       {         "number": "4",         "name": "WDI",         "type": "input",-        "description": "Watchdog input; reset asserts if WDI remains continuously high or low beyond the watchdog timeout period (1.12s min, 1.60s typ, 2.40s max); timer cleared on any rising or falling edge or on RESET assertion; VIL \u2264 0.3\u00d7VCC, VIH \u2265 0.7\u00d7VCC; minimum pulse width 50ns; leave unconnected or tri-state driver to disable watchdog."+        "description": "Watchdog input; reset asserts if WDI remains continuously high or low beyond the watchdog timeout period (1.12s min, 1.60s typ, 2.40s max); timer cleared on any rising or falling edge or on RESET assertion; VIL ≤ 0.3×VCC, VIH ≥ 0.7×VCC; minimum pulse width 50ns; leave unconnected or tri-state driver to disable watchdog."       },       {         "number": "5",         "name": "VCC",         "type": "power_in",-        "description": "Positive supply voltage; operating range 1.0V to 5.5V (for MAX823S nominal range 3.0V to 3.6V per reset threshold); supply current 5\u00b5A (typ), 12\u00b5A (max) for MAX823T/S/R in SOT23; decouple with 0.1\u00b5F capacitor close to pin for transient immunity."+        "description": "Positive supply voltage; operating range 1.0V to 5.5V (for MAX823S nominal range 3.0V to 3.6V per reset threshold); supply current 5µA (typ), 12µA (max) for MAX823T/S/R in SOT23; decouple with 0.1µF capacitor close to pin for transient immunity."       }     ],     "provenance": {@@ -140,5 +140,8 @@     "docs/max823seuk-t-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file