← Commit history
README.mdadded+56@@ -0,0 +1,56 @@+# MAX813LCSA++**MSKSEMI** · Supervisor and Reset ICs · SOP-8++MAX813LCSA from MSKSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | !MR | input | Active-low manual reset input. Internally pulled up to VCC through a 10-40 kΩ resistor (typ. 20 kΩ). Driving this pin low forces RESET active; input thresholds are 0.7·VCC / 0.6 V (VCC<4.5 V) or 2.0 V / 0.8 V (VCC≥4.5 V). Minimum low pulse width 150 ns (VCC>4.5 V) or 500 ns at lower supplies. |+| 2 | VCC | power_in | Positive supply input. Operating range 5.0 V-5.5 V for the 813L reset threshold (VRT = 4.65 V typ.); device functions down to 1.1 V for reset output validity. Supply current ICC ≈ 75 µA typical, 140 µA maximum. |+| 3 | GND | power_in | Device ground reference (0 V). Return for VCC and reference for all input/output thresholds. |+| 4 | PFI | input | Power-fail comparator input, non-inverting side against an internal 1.25 V reference (threshold 1.20-1.30 V, typ. 1.25 V, on falling edge). Very high impedance input (±25 nA leakage). Tie to GND or VCC if unused; drive from an external resistor divider to monitor an arbitrary rail. |+| 5 | !PFO | output | Active-low power-fail comparator output. Goes low when PFI drops below the 1.25 V reference. Push-pull drive: VOH ≥ VCC−1.5 V at 800 µA source (VCC≥4.5 V), VOL ≤ 0.4 V at 3.2 mA sink. |+| 6 | WDI | input | Watchdog input. Must be toggled (high or low transition) at least every tWD ≈ 1.6 s typical (1.0-2.25 s) or !WDO will assert. Minimum pulse width tWP = 50 ns (VCC>4.5 V) or 100 ns at lower supplies. Leave floating (three-state / high-Z) to disable the watchdog timer. |+| 7 | RESET | output | Active-high reset output. Asserts high whenever VCC falls below VRT (typ. 4.65 V) and remains high for tRS ≈ 200 ms after VCC recovers or after a manual reset. Push-pull drive: VOH ≥ VCC−1.5 V at 800 µA source (VCC≥4.5 V), VOL ≤ 0.4 V at 3.2 mA sink; guaranteed VOH ≥ 0.9 V even at VCC=1.2 V (ISOURCE=4 µA). |+| 8 | !WDO | output | Active-low watchdog timeout output. Pulls low if WDI is not toggled within tWD (~1.6 s). Push-pull drive: VOH ≥ VCC−1.5 V at 800 µA source (VCC≥4.5 V), VOL ≤ 0.4 V at 1.2 mA sink. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | MSKSEMI |+| Package | SOP-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `MAX813LCSA`+- `MAX813LCSA813LESA`+- `MAX813LCSA/T`+- `MAX813LCSA813LESA/T`+- `MAX813LCSA813LCPA`+- `MAX813LCSA813LEPA`+- `MAX813LCSA813LCUA`+- `MAX813LCSA813LCUA/T`+- `MAX813LCSA813LC/D`++## CAD (KiCad official)++- Symbol: `MAX813LCSA`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [MSKSEMI datasheet](docs/max813lcsa-datasheet.pdf) (None pp, sha256 `a5d1d68be0f7c959`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/max813lcsa-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "max813lcsa",+ "version": "0.1.0",+ "type": "component",+ "description": "MSKSEMI Supervisor and Reset ICs, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "max813lcsa"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "max813lcsa.kicad_sym",+ "max813lcsa.kicad_mod",+ "max813lcsa.glb",+ "max813lcsa.step",+ "max813lcsa.lbr",+ "docs/hero.png",+ "docs/max813lcsa-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}