MAX706RESA-TP

@@ -62,6 +62,18 @@   <smd name="6" x="2.4750" y="-0.6350" dx="1.9500" dy="0.6000" layer="1"/>   <smd name="7" x="2.4750" y="0.6350" dx="1.9500" dy="0.6000" layer="1"/>   <smd name="8" x="2.4750" y="1.9050" dx="1.9500" dy="0.6000" layer="1"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-2.6000" y="2.4700"/>+    <vertex x="-2.8400" y="2.8000"/>+    <vertex x="-2.3600" y="2.8000"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-0.9750" y="2.4500"/>+    <vertex x="1.9500" y="2.4500"/>+    <vertex x="1.9500" y="-2.4500"/>+    <vertex x="-1.9500" y="-2.4500"/>+    <vertex x="-1.9500" y="1.4750"/>+  </polygon>   <wire x1="-2.0600" y1="2.5600" x2="2.0600" y2="2.5600" width="0.1200" layer="21"/>   <wire x1="-2.0600" y1="2.4650" x2="-2.0600" y2="2.5600" width="0.1200" layer="21"/>   <wire x1="-2.0600" y1="-2.5600" x2="-2.0600" y2="-2.4650" width="0.1200" layer="21"/>@@ -70,7 +82,7 @@   <wire x1="2.0600" y1="-2.5600" x2="-2.0600" y2="-2.5600" width="0.1200" layer="21"/>   <text x="0" y="3.480" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>   <text x="0" y="-3.480" size="1.27" layer="27" align="top-center">&gt;VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-2.6000" y="2.4700"/><vertex x="-2.8400" y="2.8000"/><vertex x="-2.3600" y="2.8000"/></polygon></package>+</package> </packages> <symbols> <symbol name="MAX706RESA-TP">@@ -108,7 +120,13 @@         <connect gate="G$1" pin="WDI" pad="6"/>         <connect gate="G$1" pin="PFO" pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="MAX706RESA-TP" constant="no"/>+          <attribute name="MANUFACTURER" value="TECH PUBLIC" constant="no"/>+          <attribute name="LCSC_PN" value="C48886787" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>

@@ -26,19 +26,21 @@       "model_3d_step": "max706resa-tp.step",       "lbr": "max706resa-tp.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C48886787"+    },     "pins": [       {         "number": "1",         "name": "MR",         "type": "input",-        "description": "Manual-Reset Input (active-low). Triggers a reset pulse when pulled below 0.8V. Has internal ~250µA pull-up current (max 600µA). Can be driven by TTL/CMOS logic or shorted to GND via a pushbutton switch."+        "description": "Manual-Reset Input (active-low). Triggers a reset pulse when pulled below 0.8V. Has internal ~250\u00b5A pull-up current (max 600\u00b5A). Can be driven by TTL/CMOS logic or shorted to GND via a pushbutton switch."       },       {         "number": "2",         "name": "VCC",         "type": "power_in",-        "description": "Supply input. Operating range 1.0V to 5.5V (TA=0°C to +70°C); absolute maximum -0.3V to +6.0V. Typical supply current 80µA (max 150µA)."+        "description": "Supply input. Operating range 1.0V to 5.5V (TA=0\u00b0C to +70\u00b0C); absolute maximum -0.3V to +6.0V. Typical supply current 80\u00b5A (max 150\u00b5A)."       },       {         "number": "3",@@ -50,13 +52,13 @@         "number": "4",         "name": "PFI",         "type": "input",-        "description": "Power-Fail Voltage Monitor Input. When PFI is less than the 1.25V threshold, PFO goes low. High input impedance (input current ±25nA max). Connect to GND or VCC when unused."+        "description": "Power-Fail Voltage Monitor Input. When PFI is less than the 1.25V threshold, PFO goes low. High input impedance (input current \u00b125nA max). Connect to GND or VCC when unused."       },       {         "number": "5",         "name": "PFO",         "type": "output",-        "description": "Power-Fail Output (active-low). Goes low and sinks current (3.2mA at 0.4V) when PFI is below 1.25V; otherwise remains high (VOH ≥ 0.7·VCC at 800µA source)."+        "description": "Power-Fail Output (active-low). Goes low and sinks current (3.2mA at 0.4V) when PFI is below 1.25V; otherwise remains high (VOH \u2265 0.7\u00b7VCC at 800\u00b5A source)."       },       {         "number": "6",@@ -68,13 +70,13 @@         "number": "7",         "name": "RESET",         "type": "output",-        "description": "Active-Low Reset Output. Pulses low for 200ms (typ) when triggered and stays low while VCC is below the reset threshold (2.63V for R version). Remains low for 200ms after VCC rises above threshold or MR goes from Low to High. VOL ≤ 0.3V at 1.2mA sink."+        "description": "Active-Low Reset Output. Pulses low for 200ms (typ) when triggered and stays low while VCC is below the reset threshold (2.63V for R version). Remains low for 200ms after VCC rises above threshold or MR goes from Low to High. VOL \u2264 0.3V at 1.2mA sink."       },       {         "number": "8",         "name": "WDO",         "type": "output",-        "description": "Active-Low Watchdog Output. Pulls low when the internal 1.6s watchdog timer expires and remains low until the watchdog is cleared. Also goes low during low-line conditions (VCC below reset threshold). Unlike RESET, WDO has no minimum pulse width. VOL ≤ 0.4V at 1.2mA sink; VOH ≥ 0.7·VCC at 800µA source."+        "description": "Active-Low Watchdog Output. Pulls low when the internal 1.6s watchdog timer expires and remains low until the watchdog is cleared. Also goes low during low-line conditions (VCC below reset threshold). Unlike RESET, WDO has no minimum pulse width. VOL \u2264 0.4V at 1.2mA sink; VOH \u2265 0.7\u00b7VCC at 800\u00b5A source."       }     ],     "provenance": {