component
MAX706RESA-TP
Public Made by Adomby adom
TECH PUBLIC Supervisor and Reset ICs, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+10−7@@ -32,13 +32,13 @@ "number": "1", "name": "MR", "type": "input",- "description": "Manual-Reset Input (active-low). Triggers a reset pulse when pulled below 0.8V. Has internal ~250\u00b5A pull-up current (max 600\u00b5A). Can be driven by TTL/CMOS logic or shorted to GND via a pushbutton switch."+ "description": "Manual-Reset Input (active-low). Triggers a reset pulse when pulled below 0.8V. Has internal ~250µA pull-up current (max 600µA). Can be driven by TTL/CMOS logic or shorted to GND via a pushbutton switch." }, { "number": "2", "name": "VCC", "type": "power_in",- "description": "Supply input. Operating range 1.0V to 5.5V (TA=0\u00b0C to +70\u00b0C); absolute maximum -0.3V to +6.0V. Typical supply current 80\u00b5A (max 150\u00b5A)."+ "description": "Supply input. Operating range 1.0V to 5.5V (TA=0°C to +70°C); absolute maximum -0.3V to +6.0V. Typical supply current 80µA (max 150µA)." }, { "number": "3",@@ -50,13 +50,13 @@ "number": "4", "name": "PFI", "type": "input",- "description": "Power-Fail Voltage Monitor Input. When PFI is less than the 1.25V threshold, PFO goes low. High input impedance (input current \u00b125nA max). Connect to GND or VCC when unused."+ "description": "Power-Fail Voltage Monitor Input. When PFI is less than the 1.25V threshold, PFO goes low. High input impedance (input current ±25nA max). Connect to GND or VCC when unused." }, { "number": "5", "name": "PFO", "type": "output",- "description": "Power-Fail Output (active-low). Goes low and sinks current (3.2mA at 0.4V) when PFI is below 1.25V; otherwise remains high (VOH \u2265 0.7\u00b7VCC at 800\u00b5A source)."+ "description": "Power-Fail Output (active-low). Goes low and sinks current (3.2mA at 0.4V) when PFI is below 1.25V; otherwise remains high (VOH ≥ 0.7·VCC at 800µA source)." }, { "number": "6",@@ -68,13 +68,13 @@ "number": "7", "name": "RESET", "type": "output",- "description": "Active-Low Reset Output. Pulses low for 200ms (typ) when triggered and stays low while VCC is below the reset threshold (2.63V for R version). Remains low for 200ms after VCC rises above threshold or MR goes from Low to High. VOL \u2264 0.3V at 1.2mA sink."+ "description": "Active-Low Reset Output. Pulses low for 200ms (typ) when triggered and stays low while VCC is below the reset threshold (2.63V for R version). Remains low for 200ms after VCC rises above threshold or MR goes from Low to High. VOL ≤ 0.3V at 1.2mA sink." }, { "number": "8", "name": "WDO", "type": "output",- "description": "Active-Low Watchdog Output. Pulls low when the internal 1.6s watchdog timer expires and remains low until the watchdog is cleared. Also goes low during low-line conditions (VCC below reset threshold). Unlike RESET, WDO has no minimum pulse width. VOL \u2264 0.4V at 1.2mA sink; VOH \u2265 0.7\u00b7VCC at 800\u00b5A source."+ "description": "Active-Low Watchdog Output. Pulls low when the internal 1.6s watchdog timer expires and remains low until the watchdog is cleared. Also goes low during low-line conditions (VCC below reset threshold). Unlike RESET, WDO has no minimum pulse width. VOL ≤ 0.4V at 1.2mA sink; VOH ≥ 0.7·VCC at 800µA source." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/max706resa-tp-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }