← Commit history
README.mdadded+55@@ -0,0 +1,55 @@+# MAX706CSA++**MSKSEMI** · Supervisor and Reset ICs · SOP-8++MAX706CSA from MSKSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | !MR | input | Active-low manual reset input. A logic low on this pin asserts !RESET regardless of VCC. Internally pulled up to VCC through a 20kΩ (typ) resistor; minimum pulse width 150ns (4.5V<VCC<5.5V). |+| 2 | VCC | power_in | Positive supply input. Operating range 4.8V to 5.5V for the 706 variant; supply current ICC ≈ 75µA typical (140µA max). |+| 3 | GND | power_in | Ground reference (0V) for the device. |+| 4 | PFI | input | Power-fail comparator input (non-inverting side referenced to internal 1.25V ± 0.05V reference). When PFI falls below 1.25V, !PFO asserts low. Input current ±25nA max. Typically used with an external resistor divider from the monitored rail; tie to VCC or GND if unused. |+| 5 | !PFO | output | Active-low power-fail comparator output. Goes low when PFI drops below the 1.25V reference. Push-pull output: VOL ≤ 0.4V @ 3.2mA sink, VOH ≥ VCC−1.5V @ 800µA source (4.5V<VCC<5.5V). |+| 6 | WDI | input | Watchdog input. If WDI remains high or low longer than the watchdog timeout tWD (≈1.6s typ), !WDO asserts and a reset is generated. Leave floating to disable the watchdog function. Minimum pulse width 50ns (4.5V<VCC<5.5V). |+| 7 | !WDO | output | Active-low watchdog output. Asserts low when the watchdog timer expires (no WDI transition within tWD). Push-pull output: VOL ≤ 0.4V @ 1.2mA sink, VOH ≥ VCC−1.5V @ 800µA source (4.5V<VCC<5.5V). |+| 8 | !RESET | output | Active-low reset output. Asserts when VCC falls below the reset threshold VRT (4.40V typ for 706) or when !MR is pulled low, and remains asserted for tRS ≈ 200ms after VCC returns above VRT. Push-pull output: VOL ≤ 0.4V @ 3.2mA sink, VOH ≥ VCC−1.5V @ 800µA source (4.5V<VCC<5.5V). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | MSKSEMI |+| Package | SOP-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `MAX706CSA`+- `MAX706CSA/T`+- `MAX706CSA706ESA`+- `MAX706CSA706ESA/T`+- `MAX706CSA706CPA`+- `MAX706CSA706EPA`+- `MAX706CSA706CUA`+- `MAX706CSA706CUA/T`++## CAD (KiCad official)++- Symbol: `MAX706CSA`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [MSKSEMI datasheet](docs/max706csa-datasheet.pdf) (None pp, sha256 `a5d1d68be0f7c959`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/max706csa-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "max706csa",+ "version": "0.1.0",+ "type": "component",+ "description": "MSKSEMI Supervisor and Reset ICs, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "max706csa"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "max706csa.kicad_sym",+ "max706csa.kicad_mod",+ "max706csa.glb",+ "max706csa.step",+ "max706csa.lbr",+ "docs/hero.png",+ "docs/max706csa-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}