← Commit history

max706csa: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·c1ffde346d · ·parent 762e23e
1 file changed +74−1
page.json+74−1
@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "MAX706CSA",+    "manufacturer": "MSKSEMI",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "Supervisor and Reset ICs",+    "parts": {+      "symbol": "max706csa.kicad_sym",+      "footprint": "max706csa.kicad_mod",+      "model_3d": "max706csa-etched.glb",+      "model_3d_plain": "max706csa.glb",+      "model_3d_step": "max706csa-etched.step",+      "model_3d_step_plain": "max706csa.step",+      "lbr": "max706csa.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "!MR",+        "type": "input",+        "description": "Active-low manual reset input. A logic low on this pin asserts !RESET regardless of VCC. Internally pulled up to VCC through a 20kΩ (typ) resistor; minimum pulse width 150ns (4.5V<VCC<5.5V)."+      },+      {+        "number": "2",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply input. Operating range 4.8V to 5.5V for the 706 variant; supply current ICC ≈ 75µA typical (140µA max)."+      },+      {+        "number": "3",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference (0V) for the device."+      },+      {+        "number": "4",+        "name": "PFI",+        "type": "input",+        "description": "Power-fail comparator input (non-inverting side referenced to internal 1.25V ± 0.05V reference). When PFI falls below 1.25V, !PFO asserts low. Input current ±25nA max. Typically used with an external resistor divider from the monitored rail; tie to VCC or GND if unused."+      },+      {+        "number": "5",+        "name": "!PFO",+        "type": "output",+        "description": "Active-low power-fail comparator output. Goes low when PFI drops below the 1.25V reference. Push-pull output: VOL ≤ 0.4V @ 3.2mA sink, VOH ≥ VCC−1.5V @ 800µA source (4.5V<VCC<5.5V)."+      },+      {+        "number": "6",+        "name": "WDI",+        "type": "input",+        "description": "Watchdog input. If WDI remains high or low longer than the watchdog timeout tWD (≈1.6s typ), !WDO asserts and a reset is generated. Leave floating to disable the watchdog function. Minimum pulse width 50ns (4.5V<VCC<5.5V)."+      },+      {+        "number": "7",+        "name": "!WDO",+        "type": "output",+        "description": "Active-low watchdog output. Asserts low when the watchdog timer expires (no WDI transition within tWD). Push-pull output: VOL ≤ 0.4V @ 1.2mA sink, VOH ≥ VCC−1.5V @ 800µA source (4.5V<VCC<5.5V)."+      },+      {+        "number": "8",+        "name": "!RESET",+        "type": "output",+        "description": "Active-low reset output. Asserts when VCC falls below the reset threshold VRT (4.40V typ for 706) or when !MR is pulled low, and remains asserted for tRS ≈ 200ms after VCC returns above VRT. Push-pull output: VOL ≤ 0.4V @ 3.2mA sink, VOH ≥ VCC−1.5V @ 800µA source (4.5V<VCC<5.5V)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}