← Commit history

max705esa-hxy: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·fe51ca4e42 · ·parent 0ff8794
1 file changed +74−1
page.json+74−1
@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "MAX705ESA-HXY",+    "manufacturer": "HXY MOSFET",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "Supervisor and Reset ICs",+    "parts": {+      "symbol": "max705esa-hxy.kicad_sym",+      "footprint": "max705esa-hxy.kicad_mod",+      "model_3d": "max705esa-hxy-etched.glb",+      "model_3d_plain": "max705esa-hxy.glb",+      "model_3d_step": "max705esa-hxy-etched.step",+      "model_3d_step_plain": "max705esa-hxy.step",+      "lbr": "max705esa-hxy.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "!MR",+        "type": "input",+        "description": "Active-low Manual Reset input. Internally pulled up to VCC through ~20kΩ (10kΩ min / 40kΩ max). Driving !MR low for at least tMR (150ns at 4.5V<VCC<5.5V) forces !RESET low; !RESET remains asserted for tRS (typ 200ms) after !MR is released. Input thresholds: VIH ≥ 2.0V, VIL ≤ 0.8V at VCC = 5V."+      },+      {+        "number": "2",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage input. For MAX705, operating range is 5.0V-5.5V; reset threshold VRT = 4.65V (typ, 4.50V min / 4.75V max). Typical supply current ICC = 75µA."+      },+      {+        "number": "3",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference. Connect to system 0V."+      },+      {+        "number": "4",+        "name": "PFI",+        "type": "input",+        "description": "Power-Fail Comparator inverting Input. Compared internally against a 1.25V reference (1.20V min / 1.30V max). Input current ±25nA max. When PFI falls below 1.25V, !PFO is driven low. Tie to GND or VCC when not used."+      },+      {+        "number": "5",+        "name": "!PFO",+        "type": "output",+        "description": "Active-low Power-Fail Comparator Output. Goes low when PFI < 1.25V. Push-pull: VOH ≥ VCC−1.5V at ISOURCE = 800µA, VOL ≤ 0.4V at ISINK = 3.2mA (4.5V<VCC<5.5V)."+      },+      {+        "number": "6",+        "name": "WDI",+        "type": "input",+        "description": "Watchdog Input. Must be toggled within the tWD window (1.0s min / 1.6s typ / 2.25s max) or !WDO asserts low. Minimum pulse width tWP = 50ns (4.5V<VCC<5.5V). VIH ≥ 3.5V, VIL ≤ 0.8V at VCC = 5V. Leave floating to disable the watchdog function."+      },+      {+        "number": "7",+        "name": "!RESET",+        "type": "output",+        "description": "Active-low Reset Output. Asserted low whenever VCC falls below VRT (4.65V typ for MAX705) or !MR is pulled low; remains low for tRS ≈ 200ms after VCC/!MR returns valid. Push-pull: VOH ≥ VCC−1.5V at ISOURCE = 800µA, VOL ≤ 0.4V at ISINK = 3.2mA (4.5V<VCC<5.5V)."+      },+      {+        "number": "8",+        "name": "!WDO",+        "type": "output",+        "description": "Active-low Watchdog Output. Goes low when WDI is not toggled within tWD (typ 1.6s). Push-pull: VOH ≥ VCC−1.5V at ISOURCE = 800µA, VOL ≤ 0.4V at ISINK = 1.2mA (4.5V<VCC<5.5V)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}