component
MAX660MX
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# MAX660MX++**Texas Instruments** · DC-DC Converters · SOIC-8++MAX660MX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | FC | input | Frequency control logic input; select 10 kHz (open) or 80 kHz (tied to V+) oscillator frequency; no effect when OSC is externally driven. |+| 2 | CAP+ | passive | Positive terminal connection for external charge-pump capacitor; use low-ESR capacitor to minimize output impedance and maximize conversion efficiency. |+| 3 | GND | power_in | Ground reference in voltage inverter mode or positive voltage supply input in voltage doubler mode; bypass with low-ESR capacitor placed close to device. |+| 4 | CAP- | passive | Negative terminal connection for external charge-pump capacitor; use low-ESR capacitor to minimize output impedance and maximize conversion efficiency. |+| 5 | OUT | power_out | Negative voltage output in inverter mode (100 mA maximum continuous output current, 6.5 Ω typical output impedance) or positive supply return in doubler mode. |+| 6 | LV | input | Low-voltage mode control input; tie to GND when input voltage is below 3.5 V or when OSC is externally driven; tie to OUT in doubler mode. |+| 7 | OSC | input | Oscillator frequency control input with internal 15-pF capacitor; external capacitor slows oscillator or external clock up to 150 kHz can drive oscillator in inverter mode only. |+| 8 | V+ | power_in | Power supply positive voltage input at 1.5-5.5 V (inverter LV = GND), 3.5-5.5 V (inverter LV = open), or 2.5-5.5 V (doubler mode); functions as positive voltage output in doubler mode. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `MAX660MX`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `max660mx-etched.step` / `max660mx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max660mx.step` / `max660mx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/max660) (29 pp, sha256 `7388e0e993a195d4`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/max660mx-datasheet.pdf)
page.jsonadded+143@@ -0,0 +1,143 @@+{+ "slug": "max660mx",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "max660mx",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "max660mx.kicad_sym",+ "max660mx.kicad_mod",+ "max660mx.glb",+ "max660mx.step",+ "max660mx.lbr",+ "docs/hero.png",+ "docs/max660mx-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "MAX660MX",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/max660",+ "parts": {+ "symbol": "max660mx.kicad_sym",+ "footprint": "max660mx.kicad_mod",+ "model_3d": "max660mx-etched.glb",+ "model_3d_plain": "max660mx.glb",+ "model_3d_step": "max660mx-etched.step",+ "model_3d_step_plain": "max660mx.step",+ "lbr": "max660mx.lbr"+ },+ "distributor_links": {+ "lcsc": "C7262"+ },+ "pins": [+ {+ "number": "1",+ "name": "FC",+ "type": "input",+ "description": "Frequency control logic input; select 10 kHz (open) or 80 kHz (tied to V+) oscillator frequency; no effect when OSC is externally driven."+ },+ {+ "number": "2",+ "name": "CAP+",+ "type": "passive",+ "description": "Positive terminal connection for external charge-pump capacitor; use low-ESR capacitor to minimize output impedance and maximize conversion efficiency."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference in voltage inverter mode or positive voltage supply input in voltage doubler mode; bypass with low-ESR capacitor placed close to device."+ },+ {+ "number": "4",+ "name": "CAP-",+ "type": "passive",+ "description": "Negative terminal connection for external charge-pump capacitor; use low-ESR capacitor to minimize output impedance and maximize conversion efficiency."+ },+ {+ "number": "5",+ "name": "OUT",+ "type": "power_out",+ "description": "Negative voltage output in inverter mode (100 mA maximum continuous output current, 6.5 Ω typical output impedance) or positive supply return in doubler mode."+ },+ {+ "number": "6",+ "name": "LV",+ "type": "input",+ "description": "Low-voltage mode control input; tie to GND when input voltage is below 3.5 V or when OSC is externally driven; tie to OUT in doubler mode."+ },+ {+ "number": "7",+ "name": "OSC",+ "type": "input",+ "description": "Oscillator frequency control input with internal 15-pF capacitor; external capacitor slows oscillator or external clock up to 150 kHz can drive oscillator in inverter mode only."+ },+ {+ "number": "8",+ "name": "V+",+ "type": "power_in",+ "description": "Power supply positive voltage input at 1.5-5.5 V (inverter LV = GND), 3.5-5.5 V (inverter LV = open), or 2.5-5.5 V (doubler mode); functions as positive voltage output in doubler mode."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: GND (pin 3) functions as ground reference in voltage inverter mode but as positive voltage supply in; OUT (pin 5) functions as negative voltage power output in inverter mode but as positive supply retur; V+ (pin 8) functions as positive voltage power input in inverter mode but as positive voltage power "+ ],+ "pages_sent": 29,+ "cost_usd": 0.2724,+ "at": "2026-09-22T22:38:23"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/max660",+ "pages": 29,+ "sha256": "7388e0e993a195d4",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}