← Commit history
README.mdadded+58@@ -0,0 +1,58 @@+# MAX531BCSD+++**Analog Devices Inc Maxim Integrated** · Digital To Analog Converters (DAC) · SOIC-14++MAX531BCSD+ from Analog Devices Inc Maxim Integrated, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BIPOFF | passive | Bipolar offset/gain resistor tap. Connects to the internal resistor network so an external reference and jumper option configures the output buffer for unipolar or bipolar operation and gain of +1 or +2. Voltage range (VSS - 0.3V) to (VDD + 0.3V). |+| 2 | DIN | input | Serial data input. 16-bit words are clocked in MSB-first on the rising edge of SCLK while CS is low. TTL/CMOS compatible; setup time tDS = 45ns. |+| 3 | CLR | input | Active-low asynchronous clear. When held low, sets the DAC register to 000 hex independently of CS. Minimum CLR pulse width tCLR = 25ns. |+| 4 | SCLK | input | Serial clock input. Data on DIN is latched on the rising edge; DOUT changes on the falling edge when CS is low. Max clock rate ≈14MHz (tCH + tCL ≥ 70ns). |+| 5 | CS | input | Active-low chip select. While low, serial data is clocked into the shift register; on the rising edge the 12 LSBs are transferred to the DAC register and update the output. Setup time tCSS = 20ns. |+| 6 | DOUT | output | Serial data output for daisy-chaining. Reproduces DIN delayed by 16 SCLK cycles plus one clock width; CMOS output with no pull-up required. Does not tri-state when CS is high; holds the last bit state. |+| 7 | DGND | power_in | Digital ground return for the serial interface and control logic. Must be within ±0.3V of AGND. |+| 8 | AGND | power_in | Analog ground return for the DAC, reference, and output buffer. Reference and output voltages are referred to this pin; connect to DGND at a single point. |+| 9 | REFIN | input | Reference input to the R-2R ladder. Accepts (VSS + 2V) to (VDD - 2V); typically driven from REFOUT (2.048V) or an external low-impedance reference. Input resistance ≥40kΩ (code-dependent, min at 555h), input capacitance up to 50pF. |+| 10 | REFOUT | output | Internal 2.048V reference output. Sources up to ~5mA and sinks ~100µA; requires a bypass capacitor to AGND (3.3µF minimum, 33µF recommended for low noise). Typical tempco 30ppm/°C. |+| 11 | VSS | power_in | Negative analog supply. 0V for single-supply operation or −5V for dual-supply bipolar output. Absolute limits −6V to +0.3V relative to DGND/AGND. |+| 12 | VOUT | output | Buffered DAC voltage output. Rail-to-rail, short-circuit protected (ISC ≈ 12mA), drives 2kΩ / 100pF loads. Slew rate 0.15V/µs typ, 25µs settling to 12 bits. |+| 13 | VDD | power_in | Positive supply, +5V ±10%. Absolute maximum +6V referenced to DGND/AGND. Bypass with 0.1µF to AGND. |+| 14 | RFB | passive | Feedback resistor of the internal output amplifier. Together with BIPOFF selects buffer gain (+1 or +2) and unipolar/bipolar configuration. Range (VSS - 0.3V) to (VDD + 0.3V). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Analog Devices Inc Maxim Integrated |+| Package | SOIC-14 |+| Category | Data Acquisition |+| Pins | 14 |++## Ordering variants++Same part, different packaging or reel option.++- `MAX531BCSD+ACSD`+- `MAX531BCSD+`+- `MAX531BCSD+ACPD`+- `MAX531BCSD+BCPD`++## CAD (KiCad official)++- Symbol: `MAX531BCSD+`+- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`+- 3D model: SOIC-14 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Analog Devices Inc Maxim Integrated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588926013301018625) (None pp, sha256 `2116b0a223b64337`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/max531bcsd-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "max531bcsd",+ "version": "0.1.0",+ "type": "component",+ "description": "Analog Devices Inc Maxim Integrated Digital To Analog Converters (DAC), SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "max531bcsd+"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "max531bcsd.kicad_sym",+ "max531bcsd.kicad_mod",+ "max531bcsd.glb",+ "max531bcsd.step",+ "max531bcsd.lbr",+ "docs/hero.png",+ "docs/max531bcsd-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}