← Commit history

max490eesa-t: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·4d4b43bbb6 · ·parent 08988cc
2 files changed +91−11
package.json+49−9
@@ -53,19 +53,19 @@         "number": "1",         "name": "VCC",         "type": "power_in",-        "description": "Positive supply; 4.75V \u2264 VCC \u2264 5.25V; bypass to GND with 0.1\u00b5F capacitor."+        "description": "Positive supply; 4.75V ≤ VCC ≤ 5.25V; bypass to GND with 0.1µF capacitor."       },       {         "number": "2",         "name": "RO",         "type": "output",-        "description": "Receiver output; logic high when A \u2212 B > +200mV, logic low when A \u2212 B < \u2212200mV; VOH \u2265 3.5V at IO = \u22124mA, VOL \u2264 0.4V at IO = 4mA."+        "description": "Receiver output; logic high when A − B > +200mV, logic low when A − B < −200mV; VOH ≥ 3.5V at IO = −4mA, VOL ≤ 0.4V at IO = 4mA."       },       {         "number": "3",         "name": "DI",         "type": "input",-        "description": "Driver data input; VIH \u2265 2.0V, VIL \u2264 0.8V; high forces Y high and Z low, low forces Y low and Z high; input current \u00b12\u00b5A."+        "description": "Driver data input; VIH ≥ 2.0V, VIL ≤ 0.8V; high forces Y high and Z low, low forces Y low and Z high; input current ±2µA."       },       {         "number": "4",@@ -77,25 +77,25 @@         "number": "5",         "name": "Y",         "type": "output",-        "description": "Noninverting RS-485/RS-422 driver output; differential output \u2265 1.5V into 27\u03a9 or 50\u03a9 load; output voltage range \u22128V to +12.5V; \u00b115kV ESD-protected (Human Body Model); thermal shutdown forces high-impedance if die temperature rises excessively."+        "description": "Noninverting RS-485/RS-422 driver output; differential output ≥ 1.5V into 27Ω or 50Ω load; output voltage range −8V to +12.5V; ±15kV ESD-protected (Human Body Model); thermal shutdown forces high-impedance if die temperature rises excessively."       },       {         "number": "6",         "name": "Z",         "type": "output",-        "description": "Inverting RS-485/RS-422 driver output; complements Y; differential output \u2265 1.5V into 27\u03a9 or 50\u03a9 load; output voltage range \u22128V to +12.5V; \u00b115kV ESD-protected (Human Body Model)."+        "description": "Inverting RS-485/RS-422 driver output; complements Y; differential output ≥ 1.5V into 27Ω or 50Ω load; output voltage range −8V to +12.5V; ±15kV ESD-protected (Human Body Model)."       },       {         "number": "7",         "name": "B",         "type": "input",-        "description": "Inverting RS-422 receiver input (full-duplex, receive-only); accepts \u22128V to +12.5V common-mode range; differential threshold \u00b1200mV with 70mV hysteresis; input resistance 12k\u03a9 (standard unit load); \u00b115kV ESD-protected (Human Body Model)."+        "description": "Inverting RS-422 receiver input (full-duplex, receive-only); accepts −8V to +12.5V common-mode range; differential threshold ±200mV with 70mV hysteresis; input resistance 12kΩ (standard unit load); ±15kV ESD-protected (Human Body Model)."       },       {         "number": "8",         "name": "A",         "type": "input",-        "description": "Noninverting RS-422 receiver input (full-duplex, receive-only); accepts \u22128V to +12.5V common-mode range; differential threshold \u00b1200mV with 70mV hysteresis; fail-safe guarantees logic-high RO output when input is open circuit; \u00b115kV ESD-protected (Human Body Model)."+        "description": "Noninverting RS-422 receiver input (full-duplex, receive-only); accepts −8V to +12.5V common-mode range; differential threshold ±200mV with 70mV hysteresis; fail-safe guarantees logic-high RO output when input is open circuit; ±15kV ESD-protected (Human Body Model)."       }     ],     "provenance": {@@ -133,6 +133,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "max490eesa-t.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "max490eesa-t-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "1749824e752307a7449292429dedc567a90671bd17204b7920514abff74c5a3c",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -118,7 +118,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "max490eesa-t.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "max490eesa-t-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "1749824e752307a7449292429dedc567a90671bd17204b7920514abff74c5a3c",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -166,4 +206,4 @@     "public": true   },   "updated_at": "2026-09-28T18:32:52.964Z"-}\ No newline at end of file+}