← Commit history
max4291exk-t: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+57−1
page.json+57−1@@ -30,5 +30,61 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "MAX4291EXK+T",+ "manufacturer": "Analog Devices Inc Maxim Integrated",+ "package": "SC-70-5",+ "pin_count": 5,+ "category": "Operational Amplifier",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589878636561272832",+ "parts": {+ "symbol": "max4291exk-t.kicad_sym",+ "footprint": "max4291exk-t.kicad_mod",+ "model_3d": "max4291exk-t-etched.glb",+ "model_3d_plain": "max4291exk-t.glb",+ "model_3d_step": "max4291exk-t-etched.step",+ "model_3d_step_plain": "max4291exk-t.step",+ "lbr": "max4291exk-t.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "IN+",+ "type": "input",+ "description": "Noninverting op-amp input. Rail-to-rail common-mode range (VEE to VCC). Input is protected by an internal 10.6kΩ series resistor and back-to-back triple-diode stack to IN-."+ },+ {+ "number": "2",+ "name": "VEE",+ "type": "power_in",+ "description": "Negative supply rail. Connect to ground for single-supply operation (1.8V to 5.5V total), or to a negative rail for dual-supply operation (±0.9V to ±2.75V). Bypass with a 100nF capacitor."+ },+ {+ "number": "3",+ "name": "IN-",+ "type": "input",+ "description": "Inverting op-amp input. Rail-to-rail common-mode range (VEE to VCC). Input is protected by an internal 10.6kΩ series resistor and back-to-back triple-diode stack to IN+."+ },+ {+ "number": "4",+ "name": "OUT",+ "type": "output",+ "description": "Amplifier output. Rail-to-rail output stage swings to within 46mV of either supply rail with a 2kΩ load to VCC/2. Unity-gain stable for capacitive loads up to 100pF; typical output short-circuit current is 20mA."+ },+ {+ "number": "5",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply rail. 1.8V to 5.5V single-supply operation (referenced to VEE = GND), or +0.9V to +2.75V in dual-supply configuration. Bypass to VEE with a 100nF capacitor placed close to the pin."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}