← Commit history
README.mdadded+67@@ -0,0 +1,67 @@+# MAX4053CSE+T++**Analog Devices Inc Maxim Integrated** · Analog Switches, Multiplexers · SOIC-16++MAX4053CSE+T from Analog Devices Inc Maxim Integrated, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NOB | passive | Analog Switch 'B' Normally Open input/output. Connects to COMB when the corresponding truth-table condition (INH=0, ADDB=1) is satisfied. Passes rail-to-rail analog signals bidirectionally with ~60Ω typical on-resistance (±5V supplies). |+| 2 | NCB | passive | Analog Switch 'B' Normally Closed input/output. Connects to COMB when INH=0 and ADDB=0. Rail-to-rail analog signal handling, bidirectional. |+| 3 | NOA | passive | Analog Switch 'A' Normally Open input/output. Connects to COMA when INH=0 and ADDA=1. Rail-to-rail analog signal handling, bidirectional. |+| 4 | COMA | passive | Analog Switch 'A' Common pole. Bidirectional analog terminal that routes to either NOA or NCA under control of ADDA (and INH=0). |+| 5 | NCA | passive | Analog Switch 'A' Normally Closed input/output. Connects to COMA when INH=0 and ADDA=0. Rail-to-rail analog signal handling, bidirectional. |+| 6 | INH | input | Digital Inhibit input. Normally tied to GND for active operation; driving to logic high (VIH ≥ 2.4V) forces all three switches OFF regardless of address inputs. TTL/CMOS-compatible logic thresholds (0.8V / 2.4V) with sub-µA input current. |+| 7 | V- | power_in | Negative analog supply input. Connect to GND for single-supply operation (+2.7V to +16V on V+), or to a negative rail (down to -8V) for dual-supply operation (±2.7V to ±8V). Sets the lower limit of the allowable analog signal range. |+| 8 | GND | power_in | Digital ground reference for the logic inputs (INH, ADDA/B/C) and internal logic-level translators. Analog signal paths have no connection to GND; they are limited only by V+ and V-. |+| 9 | ADDA | input | Digital Address 'A' input. Selects between NCA (ADDA=0) and NOA (ADDA=1) for the 'A' SPDT switch when INH=0. TTL/CMOS-compatible (VIL ≤ 0.8V, VIH ≥ 2.4V), <1µA input current. |+| 10 | ADDB | input | Digital Address 'B' input. Selects between NCB (ADDB=0) and NOB (ADDB=1) for the 'B' SPDT switch when INH=0. TTL/CMOS-compatible logic levels. |+| 11 | ADDC | input | Digital Address 'C' input. Selects between NCC (ADDC=0) and NOC (ADDC=1) for the 'C' SPDT switch when INH=0. TTL/CMOS-compatible logic levels. |+| 12 | NCC | passive | Analog Switch 'C' Normally Closed input/output. Connects to COMC when INH=0 and ADDC=0. Rail-to-rail analog signal handling, bidirectional. |+| 13 | NOC | passive | Analog Switch 'C' Normally Open input/output. Connects to COMC when INH=0 and ADDC=1. Rail-to-rail analog signal handling, bidirectional. |+| 14 | COMC | passive | Analog Switch 'C' Common pole. Bidirectional analog terminal that routes to either NOC or NCC under control of ADDC (and INH=0). |+| 15 | COMB | passive | Analog Switch 'B' Common pole. Bidirectional analog terminal that routes to either NOB or NCB under control of ADDB (and INH=0). |+| 16 | V+ | power_in | Positive analog and digital supply input. +2.7V to +16V for single-supply operation, or +2.7V to +8V for dual-supply operation. Sets the upper limit of the analog signal range and powers the internal logic/level translators. Substrate is internally connected to V+. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Analog Devices Inc Maxim Integrated |+| Package | SOIC-16 |+| Category | Interface |+| Pins | 16 |++## Ordering variants++Same part, different packaging or reel option.++- `MAX4053CSE+T`+- `MAX4053CSE+TESE`+- `MAX4053CSE+TASE`+- `MAX4053CSE+TCPE`+- `MAX4053CSE+TEPE`+- `MAX4053CSE+TAPE`+- `MAX4053CSE+TCEE`+- `MAX4053CSE+TEEE`+- `MAX4053CSE+TAEE`+- `MAX4053CSE+TMJE`+- `MAX4053CSE+TAMJE`++## CAD (KiCad official)++- Symbol: `MAX4053CSE+T`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Analog Devices Inc Maxim Integrated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922159549202432) (None pp, sha256 `ffd86085c34c23be`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/max4053cse-t-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "max4053cse-t",+ "version": "0.1.0",+ "type": "component",+ "description": "Analog Devices Inc Maxim Integrated Analog Switches, Multiplexers, SOIC-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "max4053cse+t"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "max4053cse-t.kicad_sym",+ "max4053cse-t.kicad_mod",+ "max4053cse-t.glb",+ "max4053cse-t.step",+ "max4053cse-t.lbr",+ "docs/hero.png",+ "docs/max4053cse-t-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}