component
MAX3232EEUE+T
Public Made by Adomby adom
Analog Devices Inc Maxim Integrated RS232 ICs, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
max3232eeue-t: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+99−19
package.json+57−17@@ -53,85 +53,85 @@ "number": "1", "name": "C1+", "type": "passive",- "description": "Positive terminal of the voltage-doubler charge-pump flying capacitor; requires 0.1\u03bcF capacitor for 3.3V operation (see Table 2 for other VCC values)."+ "description": "Positive terminal of the voltage-doubler charge-pump flying capacitor; requires 0.1μF capacitor for 3.3V operation (see Table 2 for other VCC values)." }, { "number": "2", "name": "V+", "type": "power_out",- "description": "Internal doubling charge-pump positive output, nominally +5.5V over VCC = +3.0V to +5.5V; connect reservoir capacitor C3 (\u22650.1\u03bcF at 3.3V) between this pin and GND."+ "description": "Internal doubling charge-pump positive output, nominally +5.5V over VCC = +3.0V to +5.5V; connect reservoir capacitor C3 (≥0.1μF at 3.3V) between this pin and GND." }, { "number": "3", "name": "C1-", "type": "passive",- "description": "Negative terminal of the voltage-doubler charge-pump flying capacitor; requires 0.1\u03bcF capacitor for 3.3V operation (see Table 2 for other VCC values)."+ "description": "Negative terminal of the voltage-doubler charge-pump flying capacitor; requires 0.1μF capacitor for 3.3V operation (see Table 2 for other VCC values)." }, { "number": "4", "name": "C2+", "type": "passive",- "description": "Positive terminal of the inverting charge-pump flying capacitor; requires 0.1\u03bcF capacitor for 3.3V operation (see Table 2 for other VCC values)."+ "description": "Positive terminal of the inverting charge-pump flying capacitor; requires 0.1μF capacitor for 3.3V operation (see Table 2 for other VCC values)." }, { "number": "5", "name": "C2-", "type": "passive",- "description": "Negative terminal of the inverting charge-pump flying capacitor; requires 0.1\u03bcF capacitor for 3.3V operation (see Table 2 for other VCC values)."+ "description": "Negative terminal of the inverting charge-pump flying capacitor; requires 0.1μF capacitor for 3.3V operation (see Table 2 for other VCC values)." }, { "number": "6", "name": "V-", "type": "power_out",- "description": "Internal inverting charge-pump negative output, nominally \u22125.5V over VCC = +3.0V to +5.5V; connect reservoir capacitor C4 (\u22650.1\u03bcF at 3.3V) between this pin and GND."+ "description": "Internal inverting charge-pump negative output, nominally −5.5V over VCC = +3.0V to +5.5V; connect reservoir capacitor C4 (≥0.1μF at 3.3V) between this pin and GND." }, { "number": "7", "name": "T2OUT", "type": "output",- "description": "RS-232 transmitter 2 output; \u00b15V minimum swing into 3k\u03a9 \u2016 1000pF at \u2264250kbps, short-circuit current \u00b160mA; ESD-protected to \u00b115kV HBM and \u00b18kV IEC 1000-4-2 contact discharge."+ "description": "RS-232 transmitter 2 output; ±5V minimum swing into 3kΩ ‖ 1000pF at ≤250kbps, short-circuit current ±60mA; ESD-protected to ±15kV HBM and ±8kV IEC 1000-4-2 contact discharge." }, { "number": "8", "name": "R2IN", "type": "input",- "description": "RS-232 receiver 2 input; accepts \u00b125V input range, input resistance 3k\u03a9-7k\u03a9, input threshold low 0.6V-1.1V and high 1.5V-2.4V (VCC = 3.3V, TA = +25\u00b0C); ESD-protected to \u00b115kV HBM and \u00b18kV IEC 1000-4-2 contact discharge."+ "description": "RS-232 receiver 2 input; accepts ±25V input range, input resistance 3kΩ-7kΩ, input threshold low 0.6V-1.1V and high 1.5V-2.4V (VCC = 3.3V, TA = +25°C); ESD-protected to ±15kV HBM and ±8kV IEC 1000-4-2 contact discharge." }, { "number": "9", "name": "R2OUT", "type": "output",- "description": "TTL/CMOS receiver 2 output; VOL \u2264 0.4V at IOUT = 1.6mA, VOH \u2265 VCC \u2212 0.6V at IOUT = \u22121.0mA; output leakage \u00b110\u03bcA max when disabled."+ "description": "TTL/CMOS receiver 2 output; VOL ≤ 0.4V at IOUT = 1.6mA, VOH ≥ VCC − 0.6V at IOUT = −1.0mA; output leakage ±10μA max when disabled." }, { "number": "10", "name": "T2IN", "type": "input",- "description": "TTL/CMOS transmitter 2 input; VIL \u2264 0.8V, VIH \u2265 2.0V (VCC = 3.3V), 0.5V hysteresis, input leakage \u00b11\u03bcA max; connect unused inputs to GND or VCC."+ "description": "TTL/CMOS transmitter 2 input; VIL ≤ 0.8V, VIH ≥ 2.0V (VCC = 3.3V), 0.5V hysteresis, input leakage ±1μA max; connect unused inputs to GND or VCC." }, { "number": "11", "name": "T1IN", "type": "input",- "description": "TTL/CMOS transmitter 1 input; VIL \u2264 0.8V, VIH \u2265 2.0V (VCC = 3.3V), 0.5V hysteresis, input leakage \u00b11\u03bcA max; connect unused inputs to GND or VCC."+ "description": "TTL/CMOS transmitter 1 input; VIL ≤ 0.8V, VIH ≥ 2.0V (VCC = 3.3V), 0.5V hysteresis, input leakage ±1μA max; connect unused inputs to GND or VCC." }, { "number": "12", "name": "R1OUT", "type": "output",- "description": "TTL/CMOS receiver 1 output; VOL \u2264 0.4V at IOUT = 1.6mA, VOH \u2265 VCC \u2212 0.6V at IOUT = \u22121.0mA; output leakage \u00b110\u03bcA max when disabled."+ "description": "TTL/CMOS receiver 1 output; VOL ≤ 0.4V at IOUT = 1.6mA, VOH ≥ VCC − 0.6V at IOUT = −1.0mA; output leakage ±10μA max when disabled." }, { "number": "13", "name": "R1IN", "type": "input",- "description": "RS-232 receiver 1 input; accepts \u00b125V input range, input resistance 3k\u03a9-7k\u03a9, input threshold low 0.6V-1.1V and high 1.5V-2.4V (VCC = 3.3V, TA = +25\u00b0C); ESD-protected to \u00b115kV HBM and \u00b18kV IEC 1000-4-2 contact discharge."+ "description": "RS-232 receiver 1 input; accepts ±25V input range, input resistance 3kΩ-7kΩ, input threshold low 0.6V-1.1V and high 1.5V-2.4V (VCC = 3.3V, TA = +25°C); ESD-protected to ±15kV HBM and ±8kV IEC 1000-4-2 contact discharge." }, { "number": "14", "name": "T1OUT", "type": "output",- "description": "RS-232 transmitter 1 output; \u00b15V minimum swing into 3k\u03a9 \u2016 1000pF at \u2264250kbps, short-circuit current \u00b160mA; ESD-protected to \u00b115kV HBM and \u00b18kV IEC 1000-4-2 contact discharge."+ "description": "RS-232 transmitter 1 output; ±5V minimum swing into 3kΩ ‖ 1000pF at ≤250kbps, short-circuit current ±60mA; ESD-protected to ±15kV HBM and ±8kV IEC 1000-4-2 contact discharge." }, { "number": "15",@@ -143,7 +143,7 @@ "number": "16", "name": "VCC", "type": "power_in",- "description": "+3.0V to +5.5V supply voltage; supply current 0.3mA typical / 1mA maximum with no load, continuous power dissipation 754.7mW (derate 9.4mW/\u00b0C above +70\u00b0C)."+ "description": "+3.0V to +5.5V supply voltage; supply current 0.3mA typical / 1mA maximum with no load, continuous power dissipation 754.7mW (derate 9.4mW/°C above +70°C)." } ], "provenance": {@@ -180,6 +180,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "max3232eeue-t.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5.0,+ 1.1+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "max3232eeue-t-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5.0,+ 1.1+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "7251b3b28e248a228aa34dd1368e8627d33954783608836f6d3bee023dde4951",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -165,7 +165,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "max3232eeue-t.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5.0,+ 1.1+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "max3232eeue-t-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5.0,+ 1.1+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "7251b3b28e248a228aa34dd1368e8627d33954783608836f6d3bee023dde4951",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -213,4 +253,4 @@ "public": true }, "updated_at": "2026-09-28T18:29:31.679Z"-}+}