← Commit history

max3232eeae-t: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·945fd8f0e6 · ·parent 0b0cf78
2 files changed +99−19
package.json+57−17
@@ -53,85 +53,85 @@         "number": "1",         "name": "C1+",         "type": "passive",-        "description": "Positive terminal of the voltage-doubler flying capacitor; connect a 0.1\u00b5F capacitor between C1+ and C1\u2212 for +3.3V operation (see Table 2 for other supply voltages)."+        "description": "Positive terminal of the voltage-doubler flying capacitor; connect a 0.1µF capacitor between C1+ and C1− for +3.3V operation (see Table 2 for other supply voltages)."       },       {         "number": "2",         "name": "V+",         "type": "power_out",-        "description": "Internal charge-pump positive supply output, nominally +5.5V; connect 0.1\u00b5F reservoir capacitor C3 from V+ to GND."+        "description": "Internal charge-pump positive supply output, nominally +5.5V; connect 0.1µF reservoir capacitor C3 from V+ to GND."       },       {         "number": "3",         "name": "C1-",         "type": "passive",-        "description": "Negative terminal of the voltage-doubler flying capacitor; connect a 0.1\u00b5F capacitor between C1+ and C1\u2212."+        "description": "Negative terminal of the voltage-doubler flying capacitor; connect a 0.1µF capacitor between C1+ and C1−."       },       {         "number": "4",         "name": "C2+",         "type": "passive",-        "description": "Positive terminal of the inverting charge-pump flying capacitor; connect a 0.1\u00b5F capacitor between C2+ and C2\u2212."+        "description": "Positive terminal of the inverting charge-pump flying capacitor; connect a 0.1µF capacitor between C2+ and C2−."       },       {         "number": "5",         "name": "C2-",         "type": "passive",-        "description": "Negative terminal of the inverting charge-pump flying capacitor; connect a 0.1\u00b5F capacitor between C2+ and C2\u2212."+        "description": "Negative terminal of the inverting charge-pump flying capacitor; connect a 0.1µF capacitor between C2+ and C2−."       },       {         "number": "6",         "name": "V-",         "type": "power_out",-        "description": "Internal charge-pump negative supply output, nominally \u22125.5V; connect 0.1\u00b5F reservoir capacitor C4 from V\u2212 to GND."+        "description": "Internal charge-pump negative supply output, nominally −5.5V; connect 0.1µF reservoir capacitor C4 from V− to GND."       },       {         "number": "7",         "name": "T2OUT",         "type": "output",-        "description": "RS-232 transmitter output 2 (inverting); \u00b15V minimum swing into 3k\u03a9 load (typ \u00b15.4V), 250kbps guaranteed, \u00b115kV ESD-protected (HBM), short-circuit current \u00b160mA continuous."+        "description": "RS-232 transmitter output 2 (inverting); ±5V minimum swing into 3kΩ load (typ ±5.4V), 250kbps guaranteed, ±15kV ESD-protected (HBM), short-circuit current ±60mA continuous."       },       {         "number": "8",         "name": "R2IN",         "type": "input",-        "description": "RS-232 receiver input 2; accepts \u00b125V input range, 3k\u03a9-7k\u03a9 input resistance, input threshold low 0.6-1.5V / high 1.5-2.4V (VCC = +3.3V), \u00b115kV ESD-protected (HBM, IEC 1000-4-2)."+        "description": "RS-232 receiver input 2; accepts ±25V input range, 3kΩ-7kΩ input resistance, input threshold low 0.6-1.5V / high 1.5-2.4V (VCC = +3.3V), ±15kV ESD-protected (HBM, IEC 1000-4-2)."       },       {         "number": "9",         "name": "R2OUT",         "type": "output",-        "description": "TTL/CMOS receiver output 2 (inverting); VOL \u2264 0.4V at IOUT = 1.6mA, VOH \u2265 VCC\u22120.6V at IOUT = \u22121.0mA."+        "description": "TTL/CMOS receiver output 2 (inverting); VOL ≤ 0.4V at IOUT = 1.6mA, VOH ≥ VCC−0.6V at IOUT = −1.0mA."       },       {         "number": "10",         "name": "T2IN",         "type": "input",-        "description": "TTL/CMOS transmitter input 2; VIL \u2264 0.8V, VIH \u2265 2.0V at VCC = +3.3V (2.4V at +5V), 0.5V hysteresis; connect to GND or VCC if unused."+        "description": "TTL/CMOS transmitter input 2; VIL ≤ 0.8V, VIH ≥ 2.0V at VCC = +3.3V (2.4V at +5V), 0.5V hysteresis; connect to GND or VCC if unused."       },       {         "number": "11",         "name": "T1IN",         "type": "input",-        "description": "TTL/CMOS transmitter input 1; VIL \u2264 0.8V, VIH \u2265 2.0V at VCC = +3.3V (2.4V at +5V), 0.5V hysteresis; connect to GND or VCC if unused."+        "description": "TTL/CMOS transmitter input 1; VIL ≤ 0.8V, VIH ≥ 2.0V at VCC = +3.3V (2.4V at +5V), 0.5V hysteresis; connect to GND or VCC if unused."       },       {         "number": "12",         "name": "R1OUT",         "type": "output",-        "description": "TTL/CMOS receiver output 1 (inverting); VOL \u2264 0.4V at IOUT = 1.6mA, VOH \u2265 VCC\u22120.6V at IOUT = \u22121.0mA."+        "description": "TTL/CMOS receiver output 1 (inverting); VOL ≤ 0.4V at IOUT = 1.6mA, VOH ≥ VCC−0.6V at IOUT = −1.0mA."       },       {         "number": "13",         "name": "R1IN",         "type": "input",-        "description": "RS-232 receiver input 1; accepts \u00b125V input range, 3k\u03a9-7k\u03a9 input resistance, 0.5V input hysteresis, \u00b115kV ESD-protected (HBM, IEC 1000-4-2)."+        "description": "RS-232 receiver input 1; accepts ±25V input range, 3kΩ-7kΩ input resistance, 0.5V input hysteresis, ±15kV ESD-protected (HBM, IEC 1000-4-2)."       },       {         "number": "14",         "name": "T1OUT",         "type": "output",-        "description": "RS-232 transmitter output 1 (inverting); \u00b15V minimum swing into 3k\u03a9 load (typ \u00b15.4V), 250kbps guaranteed, \u00b115kV ESD-protected (HBM), output resistance \u2265300\u03a9 when VCC = 0V."+        "description": "RS-232 transmitter output 1 (inverting); ±5V minimum swing into 3kΩ load (typ ±5.4V), 250kbps guaranteed, ±15kV ESD-protected (HBM), output resistance ≥300Ω when VCC = 0V."       },       {         "number": "15",@@ -143,7 +143,7 @@         "number": "16",         "name": "VCC",         "type": "power_in",-        "description": "+3.0V to +5.5V supply voltage; typical quiescent current 1mA (max), bypass with 0.1\u00b5F capacitor placed close to the IC."+        "description": "+3.0V to +5.5V supply voltage; typical quiescent current 1mA (max), bypass with 0.1µF capacitor placed close to the IC."       }     ],     "provenance": {@@ -180,6 +180,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "max3232eeae-t.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.8,+          6.2,+          2.1+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "d0e11e46aeca5dbaa5c4bb538f3f4899761267cabdeba6486325ae9e979c03ef",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "max3232eeae-t-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.8,+          6.2,+          2.1+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3f8a1e9d5bdd87172db3c418b273c5d5f73ec02075368c35dac17634167d0014",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -165,7 +165,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "max3232eeae-t.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.8,+          6.2,+          2.1+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "d0e11e46aeca5dbaa5c4bb538f3f4899761267cabdeba6486325ae9e979c03ef",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "max3232eeae-t-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.8,+          6.2,+          2.1+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3f8a1e9d5bdd87172db3c418b273c5d5f73ec02075368c35dac17634167d0014",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -213,4 +253,4 @@     "public": true   },   "updated_at": "2026-09-28T18:29:23.904Z"-}\ No newline at end of file+}