component
MAX3232EEAE+T
Public Made by Adomby adom
Analog Devices Inc Maxim Integrated RS232 ICs, SSOP-16-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+19−16@@ -38,85 +38,85 @@ "number": "1", "name": "C1+", "type": "passive",- "description": "Positive terminal of the voltage-doubler flying capacitor; connect a 0.1\u00b5F capacitor between C1+ and C1\u2212 for +3.3V operation (see Table 2 for other supply voltages)."+ "description": "Positive terminal of the voltage-doubler flying capacitor; connect a 0.1µF capacitor between C1+ and C1− for +3.3V operation (see Table 2 for other supply voltages)." }, { "number": "2", "name": "V+", "type": "power_out",- "description": "Internal charge-pump positive supply output, nominally +5.5V; connect 0.1\u00b5F reservoir capacitor C3 from V+ to GND."+ "description": "Internal charge-pump positive supply output, nominally +5.5V; connect 0.1µF reservoir capacitor C3 from V+ to GND." }, { "number": "3", "name": "C1-", "type": "passive",- "description": "Negative terminal of the voltage-doubler flying capacitor; connect a 0.1\u00b5F capacitor between C1+ and C1\u2212."+ "description": "Negative terminal of the voltage-doubler flying capacitor; connect a 0.1µF capacitor between C1+ and C1−." }, { "number": "4", "name": "C2+", "type": "passive",- "description": "Positive terminal of the inverting charge-pump flying capacitor; connect a 0.1\u00b5F capacitor between C2+ and C2\u2212."+ "description": "Positive terminal of the inverting charge-pump flying capacitor; connect a 0.1µF capacitor between C2+ and C2−." }, { "number": "5", "name": "C2-", "type": "passive",- "description": "Negative terminal of the inverting charge-pump flying capacitor; connect a 0.1\u00b5F capacitor between C2+ and C2\u2212."+ "description": "Negative terminal of the inverting charge-pump flying capacitor; connect a 0.1µF capacitor between C2+ and C2−." }, { "number": "6", "name": "V-", "type": "power_out",- "description": "Internal charge-pump negative supply output, nominally \u22125.5V; connect 0.1\u00b5F reservoir capacitor C4 from V\u2212 to GND."+ "description": "Internal charge-pump negative supply output, nominally −5.5V; connect 0.1µF reservoir capacitor C4 from V− to GND." }, { "number": "7", "name": "T2OUT", "type": "output",- "description": "RS-232 transmitter output 2 (inverting); \u00b15V minimum swing into 3k\u03a9 load (typ \u00b15.4V), 250kbps guaranteed, \u00b115kV ESD-protected (HBM), short-circuit current \u00b160mA continuous."+ "description": "RS-232 transmitter output 2 (inverting); ±5V minimum swing into 3kΩ load (typ ±5.4V), 250kbps guaranteed, ±15kV ESD-protected (HBM), short-circuit current ±60mA continuous." }, { "number": "8", "name": "R2IN", "type": "input",- "description": "RS-232 receiver input 2; accepts \u00b125V input range, 3k\u03a9-7k\u03a9 input resistance, input threshold low 0.6-1.5V / high 1.5-2.4V (VCC = +3.3V), \u00b115kV ESD-protected (HBM, IEC 1000-4-2)."+ "description": "RS-232 receiver input 2; accepts ±25V input range, 3kΩ-7kΩ input resistance, input threshold low 0.6-1.5V / high 1.5-2.4V (VCC = +3.3V), ±15kV ESD-protected (HBM, IEC 1000-4-2)." }, { "number": "9", "name": "R2OUT", "type": "output",- "description": "TTL/CMOS receiver output 2 (inverting); VOL \u2264 0.4V at IOUT = 1.6mA, VOH \u2265 VCC\u22120.6V at IOUT = \u22121.0mA."+ "description": "TTL/CMOS receiver output 2 (inverting); VOL ≤ 0.4V at IOUT = 1.6mA, VOH ≥ VCC−0.6V at IOUT = −1.0mA." }, { "number": "10", "name": "T2IN", "type": "input",- "description": "TTL/CMOS transmitter input 2; VIL \u2264 0.8V, VIH \u2265 2.0V at VCC = +3.3V (2.4V at +5V), 0.5V hysteresis; connect to GND or VCC if unused."+ "description": "TTL/CMOS transmitter input 2; VIL ≤ 0.8V, VIH ≥ 2.0V at VCC = +3.3V (2.4V at +5V), 0.5V hysteresis; connect to GND or VCC if unused." }, { "number": "11", "name": "T1IN", "type": "input",- "description": "TTL/CMOS transmitter input 1; VIL \u2264 0.8V, VIH \u2265 2.0V at VCC = +3.3V (2.4V at +5V), 0.5V hysteresis; connect to GND or VCC if unused."+ "description": "TTL/CMOS transmitter input 1; VIL ≤ 0.8V, VIH ≥ 2.0V at VCC = +3.3V (2.4V at +5V), 0.5V hysteresis; connect to GND or VCC if unused." }, { "number": "12", "name": "R1OUT", "type": "output",- "description": "TTL/CMOS receiver output 1 (inverting); VOL \u2264 0.4V at IOUT = 1.6mA, VOH \u2265 VCC\u22120.6V at IOUT = \u22121.0mA."+ "description": "TTL/CMOS receiver output 1 (inverting); VOL ≤ 0.4V at IOUT = 1.6mA, VOH ≥ VCC−0.6V at IOUT = −1.0mA." }, { "number": "13", "name": "R1IN", "type": "input",- "description": "RS-232 receiver input 1; accepts \u00b125V input range, 3k\u03a9-7k\u03a9 input resistance, 0.5V input hysteresis, \u00b115kV ESD-protected (HBM, IEC 1000-4-2)."+ "description": "RS-232 receiver input 1; accepts ±25V input range, 3kΩ-7kΩ input resistance, 0.5V input hysteresis, ±15kV ESD-protected (HBM, IEC 1000-4-2)." }, { "number": "14", "name": "T1OUT", "type": "output",- "description": "RS-232 transmitter output 1 (inverting); \u00b15V minimum swing into 3k\u03a9 load (typ \u00b15.4V), 250kbps guaranteed, \u00b115kV ESD-protected (HBM), output resistance \u2265300\u03a9 when VCC = 0V."+ "description": "RS-232 transmitter output 1 (inverting); ±5V minimum swing into 3kΩ load (typ ±5.4V), 250kbps guaranteed, ±15kV ESD-protected (HBM), output resistance ≥300Ω when VCC = 0V." }, { "number": "15",@@ -128,7 +128,7 @@ "number": "16", "name": "VCC", "type": "power_in",- "description": "+3.0V to +5.5V supply voltage; typical quiescent current 1mA (max), bypass with 0.1\u00b5F capacitor placed close to the IC."+ "description": "+3.0V to +5.5V supply voltage; typical quiescent current 1mA (max), bypass with 0.1µF capacitor placed close to the IC." } ], "provenance": {@@ -208,5 +208,8 @@ "docs/max3232eeae-t-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }