← Commit history
page.json+164−8@@ -1,13 +1,174 @@ {+ "schema_version": 1,+ "type": "component", "slug": "max3221eipwr",+ "title": "MAX3221EIPWR",+ "brief": "Texas Instruments RS232 ICs, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Texas Instruments RS232 ICs, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "interface", "max3221eipwr" ],+ "component": {+ "mpn": "MAX3221EIPWR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-16",+ "pin_count": 16,+ "category": "Interface",+ "subcategory": "RS232 ICs",+ "datasheet": "https://www.ti.com/lit/ds/symlink/max3221ei.pdf",+ "parts": {+ "symbol": "max3221eipwr.kicad_sym",+ "footprint": "max3221eipwr.kicad_mod",+ "model_3d": "max3221eipwr.glb",+ "model_3d_step": "max3221eipwr.step",+ "lbr": "max3221eipwr.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "EN",+ "type": "input",+ "description": "Active-low receiver enable input. Low input enables the receiver ROUT output; high input sets ROUT to high impedance."+ },+ {+ "number": "2",+ "name": "C1+",+ "type": "passive",+ "description": "Positive terminal of the voltage-doubler charge-pump capacitor C1. Connect a 0.1 \u00b5F (VCC=3.3V) or 0.047 \u00b5F (VCC=5V) capacitor between C1+ and C1-."+ },+ {+ "number": "3",+ "name": "V+",+ "type": "power_out",+ "description": "+5.5-V supply rail generated by the internal charge pump. Requires an external reservoir capacitor to GND."+ },+ {+ "number": "4",+ "name": "C1-",+ "type": "passive",+ "description": "Negative terminal of the voltage-doubler charge-pump capacitor C1. Paired with C1+."+ },+ {+ "number": "5",+ "name": "C2+",+ "type": "passive",+ "description": "Positive terminal of the voltage-inverter charge-pump capacitor C2. Connect a 0.1 \u00b5F or 0.33 \u00b5F capacitor between C2+ and C2-."+ },+ {+ "number": "6",+ "name": "C2-",+ "type": "passive",+ "description": "Negative terminal of the voltage-inverter charge-pump capacitor C2. Paired with C2+."+ },+ {+ "number": "7",+ "name": "V-",+ "type": "power_out",+ "description": "-5.5-V supply rail generated by the internal charge-pump inverter. Requires an external reservoir capacitor to GND."+ },+ {+ "number": "8",+ "name": "RIN",+ "type": "input",+ "description": "RS-232 receiver input. Accepts \u00b125-V RS-232 signaling levels and provides \u00b115-kV IEC 61000-4-2 ESD protection."+ },+ {+ "number": "9",+ "name": "ROUT",+ "type": "output",+ "description": "Receiver output (TTL/CMOS-level). Driven by RIN; goes to high impedance when EN is high."+ },+ {+ "number": "10",+ "name": "INVALID",+ "type": "output",+ "description": "Invalid output status pin (active-low). Output is low when the RIN input is unpowered or disconnected, indicating no valid RS-232 signal."+ },+ {+ "number": "11",+ "name": "DIN",+ "type": "input",+ "description": "Driver (transmitter) input. Accepts TTL/CMOS logic levels (compatible with 3.3-V or 5-V logic)."+ },+ {+ "number": "12",+ "name": "FORCEON",+ "type": "input",+ "description": "Auto-power-down control input. Together with FORCEOFF, selects automatic or manual driver enable behavior."+ },+ {+ "number": "13",+ "name": "DOUT",+ "type": "output",+ "description": "RS-232 driver output. Delivers \u00b15-V typical RS-232 signaling levels with \u00b115-kV IEC 61000-4-2 ESD protection and up to 30-V/\u00b5s slew rate."+ },+ {+ "number": "14",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference."+ },+ {+ "number": "15",+ "name": "VCC",+ "type": "power_in",+ "description": "3-V to 5.5-V primary supply voltage. Bypass with a 0.1 \u00b5F capacitor to GND."+ },+ {+ "number": "16",+ "name": "FORCEOFF",+ "type": "input",+ "description": "Active-low auto-power-down control input. When low, forces the driver and charge pump off for power savings; when high, allows normal or auto-power-down operation with FORCEON."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/max3221ei.pdf",+ "pages": 26,+ "sha256": "6fab784842148401",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "TSSOP-16",+ "Category": "Interface",+ "Pins": "16"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "max3221eipwr"+ ],+ "discovery_pitch": "MAX3221EIPWR (Texas Instruments) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +186,5 @@ "docs/max3221eipwr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }