← Commit history
page.json+164−8@@ -1,13 +1,174 @@ {+ "schema_version": 1,+ "type": "component", "slug": "max3221cpwr",+ "title": "MAX3221CPWR",+ "brief": "Texas Instruments RS232 ICs, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Texas Instruments RS232 ICs, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "interface", "max3221cpwr" ],+ "component": {+ "mpn": "MAX3221CPWR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-16",+ "pin_count": 16,+ "category": "Interface",+ "subcategory": "RS232 ICs",+ "datasheet": "https://www.ti.com/lit/ds/symlink/max3221c.pdf",+ "parts": {+ "symbol": "max3221cpwr.kicad_sym",+ "footprint": "max3221cpwr.kicad_mod",+ "model_3d": "max3221cpwr.glb",+ "model_3d_step": "max3221cpwr.step",+ "lbr": "max3221cpwr.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "EN",+ "type": "input",+ "description": "Receiver output enable (active low). Low input enables the ROUT output; high input places ROUT in high impedance."+ },+ {+ "number": "2",+ "name": "C1+",+ "type": "passive",+ "description": "Positive terminal of the voltage-doubler charge-pump capacitor C1 (typ. 0.1 \u00b5F at VCC = 3.3 V, 0.047 \u00b5F at VCC = 5 V)."+ },+ {+ "number": "3",+ "name": "V+",+ "type": "power_out",+ "description": "Positive charge-pump output, nominally +5.5 V generated internally. Bypass to GND with a reservoir capacitor (typ. 0.1 \u00b5F at 3.3 V / 0.33 \u00b5F at 5 V)."+ },+ {+ "number": "4",+ "name": "C1-",+ "type": "passive",+ "description": "Negative terminal of the voltage-doubler charge-pump capacitor C1."+ },+ {+ "number": "5",+ "name": "C2+",+ "type": "passive",+ "description": "Positive terminal of the inverting charge-pump capacitor C2 (typ. 0.1 \u00b5F at 3.3 V / 0.33 \u00b5F at 5 V)."+ },+ {+ "number": "6",+ "name": "C2-",+ "type": "passive",+ "description": "Negative terminal of the inverting charge-pump capacitor C2."+ },+ {+ "number": "7",+ "name": "V-",+ "type": "power_out",+ "description": "Negative charge-pump output, nominally -5.5 V generated internally. Bypass to GND with a reservoir capacitor (typ. 0.1 \u00b5F at 3.3 V / 0.33 \u00b5F at 5 V)."+ },+ {+ "number": "8",+ "name": "RIN",+ "type": "input",+ "description": "RS-232 receiver input. Accepts \u00b125 V RS-232 line levels; protected to \u00b115 kV HBM ESD."+ },+ {+ "number": "9",+ "name": "ROUT",+ "type": "output",+ "description": "Receiver output (CMOS/TTL levels referenced to VCC). Goes to high impedance when EN is high."+ },+ {+ "number": "10",+ "name": "INVALID",+ "type": "output",+ "description": "Invalid receiver-input status output (active low). Output is low when all RIN inputs are unpowered / not driven by a valid RS-232 signal."+ },+ {+ "number": "11",+ "name": "DIN",+ "type": "input",+ "description": "Driver (transmitter) logic input. CMOS/TTL-compatible; VIH \u2265 2 V (VCC = 3.3 V) or 2.4 V (VCC = 5 V), VIL \u2264 0.8 V."+ },+ {+ "number": "12",+ "name": "FORCEON",+ "type": "input",+ "description": "Automatic power-down control input. When FORCEON is low and FORCEOFF is high, auto power-down is active; drive high to force the driver always on."+ },+ {+ "number": "13",+ "name": "DOUT",+ "type": "output",+ "description": "RS-232 driver output. Swings between V+ and V- (typ. \u00b15.4 V into a 3-k\u03a9 load); \u00b115-kV HBM ESD protected."+ },+ {+ "number": "14",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference."+ },+ {+ "number": "15",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage, 3.0 V to 5.5 V (recommended 3.3 V or 5 V nominal). Bypass with 0.1 \u00b5F to GND."+ },+ {+ "number": "16",+ "name": "FORCEOFF",+ "type": "input",+ "description": "Automatic power-down control input (active low). Drive low to force the drivers and charge pump off; high to allow normal / auto-power-down operation."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/max3221c.pdf",+ "pages": 25,+ "sha256": "b386254cd61c7a40",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "TSSOP-16",+ "Category": "Interface",+ "Pins": "16"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "max3221cpwr"+ ],+ "discovery_pitch": "MAX3221CPWR (Texas Instruments) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +186,5 @@ "docs/max3221cpwr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }