← Commit history

max3088eim: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·6b98d9cef0 · ·parent 85e1875
1 file changed +74−1
page.json+74−1
@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "MAX3088EIM",+    "manufacturer": "HGSEMI",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "RS-485/RS-422 ICs",+    "parts": {+      "symbol": "max3088eim.kicad_sym",+      "footprint": "max3088eim.kicad_mod",+      "model_3d": "max3088eim-etched.glb",+      "model_3d_plain": "max3088eim.glb",+      "model_3d_step": "max3088eim-etched.step",+      "model_3d_step_plain": "max3088eim.step",+      "lbr": "max3088eim.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "RO",+        "type": "output",+        "description": "Receiver output. When RE is low, RO = 1 if (A-B) ≥ -50mV and RO = 0 if (A-B) ≤ -200mV. High-impedance when RE is high; enters shutdown when RE=1 and DE=0. VOH ≥ VCC-0.6V at IO=-4mA; VOL ≤ 0.4V at IO=4mA."+      },+      {+        "number": "2",+        "name": "RE",+        "type": "input",+        "description": "Receiver output enable, active low. RO is enabled when RE is low and high-impedance when RE is high. Driving RE high with DE low places the device in low-power shutdown mode. Uses a hot-swap input structure that keeps RE high during power-up transients. VIH ≥ 2V, VIL ≤ 0.8V."+      },+      {+        "number": "3",+        "name": "DE",+        "type": "input",+        "description": "Driver output enable, active high. Driver A/B outputs are enabled when DE is high and high-impedance when DE is low. Driving RE high with DE low places the device in low-power shutdown mode. Uses a hot-swap input structure that keeps DE low during power-up transients. VIH ≥ 2V, VIL ≤ 0.8V."+      },+      {+        "number": "4",+        "name": "DI",+        "type": "input",+        "description": "Driver input. When DE is high, a low on DI forces A low and B high; a high on DI forces A high and B low. VIH ≥ 2V, VIL ≤ 0.8V, IIN ±1µA."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for supply and all logic-level signals."+      },+      {+        "number": "6",+        "name": "A",+        "type": "bidirectional",+        "description": "Non-inverting receiver input AND non-inverting driver output (shared half-duplex bus line). Withstands -7V to +12V bus common-mode; ±16kV IEC 61000-4-2 ESD protected. Receiver differential threshold VTH is between -200mV and -50mV."+      },+      {+        "number": "7",+        "name": "B",+        "type": "bidirectional",+        "description": "Inverting receiver input AND inverting driver output (shared half-duplex bus line). Withstands -7V to +12V bus common-mode; ±16kV IEC 61000-4-2 ESD protected."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply, 4.5V ≤ VCC ≤ 5.5V. Bypass to GND with a 0.1µF ceramic capacitor. Typical ICC = 530µA (no-load, driver enabled); shutdown current 0.05µA typ."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}