← Commit history
max3051esa: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "MAX3051ESA",+ "manufacturer": "Tokmas",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "CAN Transceivers",+ "parts": {+ "symbol": "max3051esa.kicad_sym",+ "footprint": "max3051esa.kicad_mod",+ "model_3d": "max3051esa-etched.glb",+ "model_3d_plain": "max3051esa.glb",+ "model_3d_step": "max3051esa-etched.step",+ "model_3d_step_plain": "max3051esa.step",+ "lbr": "max3051esa.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "D",+ "type": "input",+ "description": "CAN transmit data input (TXD/driver input). LOW drives the bus to the dominant state; HIGH (or open) allows the recessive state. Internal pull-up resistor to VCC."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference (0V) for the device."+ },+ {+ "number": "3",+ "name": "VCC",+ "type": "power_in",+ "description": "Transceiver supply voltage input, 3.0V to 3.6V (typ. 3.3V)."+ },+ {+ "number": "4",+ "name": "R",+ "type": "output",+ "description": "CAN receive data output (RXD/receiver output). LOW indicates a dominant bus state (VID ≥ 0.9V); HIGH indicates a recessive bus state (VID ≤ 0.5V)."+ },+ {+ "number": "5",+ "name": "SHDN",+ "type": "input",+ "description": "Shutdown input, CMOS/TTL compatible. Driving SHDN HIGH puts the device into low-current off mode (ISHDN ≈ 1µA). Internal pull-down resistor to GND; grounded or floating = normal operation."+ },+ {+ "number": "6",+ "name": "CANL",+ "type": "bidirectional",+ "description": "Low-level CAN bus line. Differential bus I/O; tolerates -36V to +36V DC and ±100V transients. ±12kV HBM ESD protected."+ },+ {+ "number": "7",+ "name": "CANH",+ "type": "bidirectional",+ "description": "High-level CAN bus line. Differential bus I/O; tolerates -36V to +36V DC and ±100V transients. ±12kV HBM ESD protected."+ },+ {+ "number": "8",+ "name": "RS",+ "type": "input",+ "description": "Mode-select pin: strong pull-down to GND selects high-speed mode; strong pull-up to VCC (>0.75·VCC) selects low-power standby mode; a 10kΩ to 100kΩ resistor to GND selects slope-control mode (slew rate proportional to RS current)."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}