← Commit history

Initial commit: component/max232idr

Ray ·d7aece7449 ·
2 files changed +243
README.mdadded+52
@@ -0,0 +1,52 @@+# MAX232IDR++**Texas Instruments** · RS232 ICs · SOIC-16++MAX232IDR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | C1+ | passive | Positive lead of C1 capacitor; 1µF external capacitor required for charge pump circuit |+| 2 | VS+ | power_out | Positive charge pump output for storage capacitor only; approximately +10V at 5V supply input |+| 3 | C1- | passive | Negative lead of C1 capacitor; 1µF external capacitor required for charge pump circuit |+| 4 | C2+ | passive | Positive lead of C2 capacitor; 1µF external capacitor required for charge pump circuit |+| 5 | C2- | passive | Negative lead of C2 capacitor; 1µF external capacitor required for charge pump circuit |+| 6 | VS- | power_out | Negative charge pump output for storage capacitor only; approximately -10V at 5V supply input |+| 7 | T2OUT | output | RS232 line data output (to remote RS232 system); outputs ±5V to ±7V with 3kΩ load resistance |+| 8 | R2IN | input | RS232 line data input (from remote RS232 system); accepts ±30V input levels with 1.3V typical threshold |+| 9 | R2OUT | output | Logic data output (to UART); outputs from 0V to VCC logic levels |+| 10 | T2IN | input | Logic data input (from UART); accepts TTL/CMOS input levels 0.8V to 2V |+| 11 | T1IN | input | Logic data input (from UART); accepts TTL/CMOS input levels 0.8V to 2V |+| 12 | R1OUT | output | Logic data output (to UART); outputs from 0V to VCC logic levels |+| 13 | R1IN | input | RS232 line data input (from remote RS232 system); accepts ±30V input levels with 1.3V typical threshold |+| 14 | T1OUT | output | RS232 line data output (to remote RS232 system); outputs ±5V to ±7V with 3kΩ load resistance |+| 15 | GND | power_in | Ground; 0V reference for all logic and supply circuits |+| 16 | VCC | power_in | Supply voltage input; connect to external 4.5V to 5.5V power supply with 5V nominal recommended |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16 |+| Category | Interface |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `MAX232IDR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16 (KiCad packages3D, STEP)+- 3D model files: `max232idr-etched.step` / `max232idr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max232idr.step` / `max232idr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/max232.pdf) (27 pp, sha256 `47d45fefa0db5981`, retrieved 2026-09-21, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/max232idr-datasheet.pdf)
page.jsonadded+191
@@ -0,0 +1,191 @@+{+  "slug": "max232idr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments RS232 ICs, SOIC-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "max232idr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "max232idr.kicad_sym",+    "max232idr.kicad_mod",+    "max232idr.glb",+    "max232idr.step",+    "max232idr.lbr",+    "docs/hero.png",+    "docs/max232idr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "MAX232IDR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-16",+    "pin_count": 16,+    "category": "Interface",+    "subcategory": "RS232 ICs",+    "datasheet": "https://www.ti.com/lit/ds/symlink/max232.pdf",+    "parts": {+      "symbol": "max232idr.kicad_sym",+      "footprint": "max232idr.kicad_mod",+      "model_3d": "max232idr-etched.glb",+      "model_3d_plain": "max232idr.glb",+      "model_3d_step": "max232idr-etched.step",+      "model_3d_step_plain": "max232idr.step",+      "lbr": "max232idr.lbr"+    },+    "distributor_links": {+      "lcsc": "C59824"+    },+    "pins": [+      {+        "number": "1",+        "name": "C1+",+        "type": "passive",+        "description": "Positive lead of C1 capacitor; 1µF external capacitor required for charge pump circuit"+      },+      {+        "number": "2",+        "name": "VS+",+        "type": "power_out",+        "description": "Positive charge pump output for storage capacitor only; approximately +10V at 5V supply input"+      },+      {+        "number": "3",+        "name": "C1-",+        "type": "passive",+        "description": "Negative lead of C1 capacitor; 1µF external capacitor required for charge pump circuit"+      },+      {+        "number": "4",+        "name": "C2+",+        "type": "passive",+        "description": "Positive lead of C2 capacitor; 1µF external capacitor required for charge pump circuit"+      },+      {+        "number": "5",+        "name": "C2-",+        "type": "passive",+        "description": "Negative lead of C2 capacitor; 1µF external capacitor required for charge pump circuit"+      },+      {+        "number": "6",+        "name": "VS-",+        "type": "power_out",+        "description": "Negative charge pump output for storage capacitor only; approximately -10V at 5V supply input"+      },+      {+        "number": "7",+        "name": "T2OUT",+        "type": "output",+        "description": "RS232 line data output (to remote RS232 system); outputs ±5V to ±7V with 3kΩ load resistance"+      },+      {+        "number": "8",+        "name": "R2IN",+        "type": "input",+        "description": "RS232 line data input (from remote RS232 system); accepts ±30V input levels with 1.3V typical threshold"+      },+      {+        "number": "9",+        "name": "R2OUT",+        "type": "output",+        "description": "Logic data output (to UART); outputs from 0V to VCC logic levels"+      },+      {+        "number": "10",+        "name": "T2IN",+        "type": "input",+        "description": "Logic data input (from UART); accepts TTL/CMOS input levels 0.8V to 2V"+      },+      {+        "number": "11",+        "name": "T1IN",+        "type": "input",+        "description": "Logic data input (from UART); accepts TTL/CMOS input levels 0.8V to 2V"+      },+      {+        "number": "12",+        "name": "R1OUT",+        "type": "output",+        "description": "Logic data output (to UART); outputs from 0V to VCC logic levels"+      },+      {+        "number": "13",+        "name": "R1IN",+        "type": "input",+        "description": "RS232 line data input (from remote RS232 system); accepts ±30V input levels with 1.3V typical threshold"+      },+      {+        "number": "14",+        "name": "T1OUT",+        "type": "output",+        "description": "RS232 line data output (to remote RS232 system); outputs ±5V to ±7V with 3kΩ load resistance"+      },+      {+        "number": "15",+        "name": "GND",+        "type": "power_in",+        "description": "Ground; 0V reference for all logic and supply circuits"+      },+      {+        "number": "16",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage input; connect to external 4.5V to 5.5V power supply with 5V nominal recommended"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin 12 (R1OUT) is omitted from Table 4-1 on PAGE 3 but is clearly shown in the package diagram and h"+        ],+        "pages_sent": 27,+        "cost_usd": 0.281,+        "at": "2026-09-21T16:04:44"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/max232.pdf",+        "pages": 27,+        "sha256": "47d45fefa0db5981",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file