← Commit history
page.json+19−16@@ -32,85 +32,85 @@ "number": "1", "name": "C1+", "type": "passive",- "description": "Positive lead of the C1 charge-pump flying capacitor (1\u00b5F). Used with C1- to double VCC to VS+."+ "description": "Positive lead of the C1 charge-pump flying capacitor (1µF). Used with C1- to double VCC to VS+." }, { "number": "2", "name": "VS+", "type": "power_out",- "description": "Positive charge-pump output (typ +8.5V) for storage capacitor only (1\u00b5F to GND). Internal RS-232 driver supply rail."+ "description": "Positive charge-pump output (typ +8.5V) for storage capacitor only (1µF to GND). Internal RS-232 driver supply rail." }, { "number": "3", "name": "C1-", "type": "passive",- "description": "Negative lead of the C1 charge-pump flying capacitor (1\u00b5F)."+ "description": "Negative lead of the C1 charge-pump flying capacitor (1µF)." }, { "number": "4", "name": "C2+", "type": "passive",- "description": "Positive lead of the C2 charge-pump flying capacitor (1\u00b5F). Used to invert VS+ to produce VS-."+ "description": "Positive lead of the C2 charge-pump flying capacitor (1µF). Used to invert VS+ to produce VS-." }, { "number": "5", "name": "C2-", "type": "passive",- "description": "Negative lead of the C2 charge-pump flying capacitor (1\u00b5F)."+ "description": "Negative lead of the C2 charge-pump flying capacitor (1µF)." }, { "number": "6", "name": "VS-", "type": "power_out",- "description": "Negative charge-pump output (typ -8.5V) for storage capacitor only (1\u00b5F to GND). Internal RS-232 driver negative supply rail."+ "description": "Negative charge-pump output (typ -8.5V) for storage capacitor only (1µF to GND). Internal RS-232 driver negative supply rail." }, { "number": "7", "name": "T2OUT", "type": "output",- "description": "Driver 2 RS-232 line data output (to remote RS-232 system). Swings between VS- and VS+ (typ \u00b17V into 3k\u03a9 load)."+ "description": "Driver 2 RS-232 line data output (to remote RS-232 system). Swings between VS- and VS+ (typ ±7V into 3kΩ load)." }, { "number": "8", "name": "R2IN", "type": "input",- "description": "Receiver 2 RS-232 line data input (from remote RS-232 system). Tolerates \u00b130V; input resistance 3-7 k\u03a9; thresholds VIT+ \u22642.4V, VIT- \u22650.8V."+ "description": "Receiver 2 RS-232 line data input (from remote RS-232 system). Tolerates ±30V; input resistance 3-7 kΩ; thresholds VIT+ ≤2.4V, VIT- ≥0.8V." }, { "number": "9", "name": "R2OUT", "type": "output",- "description": "Receiver 2 logic data output (to UART/CMOS/TTL). VOH \u22653.5V @ -1mA, VOL \u22640.4V @ 3.2mA. Goes high on open R2IN."+ "description": "Receiver 2 logic data output (to UART/CMOS/TTL). VOH ≥3.5V @ -1mA, VOL ≤0.4V @ 3.2mA. Goes high on open R2IN." }, { "number": "10", "name": "T2IN", "type": "input",- "description": "Driver 2 logic data input (from UART/CMOS/TTL). VIH \u22652V, VIL \u22640.8V; internal pull-up ensures a high input when line is high-impedance."+ "description": "Driver 2 logic data input (from UART/CMOS/TTL). VIH ≥2V, VIL ≤0.8V; internal pull-up ensures a high input when line is high-impedance." }, { "number": "11", "name": "T1IN", "type": "input",- "description": "Driver 1 logic data input (from UART/CMOS/TTL). VIH \u22652V, VIL \u22640.8V; internal pull-up ensures a high input when line is high-impedance."+ "description": "Driver 1 logic data input (from UART/CMOS/TTL). VIH ≥2V, VIL ≤0.8V; internal pull-up ensures a high input when line is high-impedance." }, { "number": "12", "name": "R1OUT", "type": "output",- "description": "Receiver 1 logic data output (to UART/CMOS/TTL). VOH \u22653.5V @ -1mA, VOL \u22640.4V @ 3.2mA. Goes high on open R1IN."+ "description": "Receiver 1 logic data output (to UART/CMOS/TTL). VOH ≥3.5V @ -1mA, VOL ≤0.4V @ 3.2mA. Goes high on open R1IN." }, { "number": "13", "name": "R1IN", "type": "input",- "description": "Receiver 1 RS-232 line data input (from remote RS-232 system). Tolerates \u00b130V; input resistance 3-7 k\u03a9; thresholds VIT+ \u22642.4V, VIT- \u22650.8V."+ "description": "Receiver 1 RS-232 line data input (from remote RS-232 system). Tolerates ±30V; input resistance 3-7 kΩ; thresholds VIT+ ≤2.4V, VIT- ≥0.8V." }, { "number": "14", "name": "T1OUT", "type": "output",- "description": "Driver 1 RS-232 line data output (to remote RS-232 system). Swings between VS- and VS+ (typ \u00b17V into 3k\u03a9 load)."+ "description": "Driver 1 RS-232 line data output (to remote RS-232 system). Swings between VS- and VS+ (typ ±7V into 3kΩ load)." }, { "number": "15",@@ -122,7 +122,7 @@ "number": "16", "name": "VCC", "type": "power_in",- "description": "Supply voltage input, 4.5-5.5V (nom 5V). Bypass with 1\u00b5F to GND. Typical ICC = 8mA (10mA max)."+ "description": "Supply voltage input, 4.5-5.5V (nom 5V). Bypass with 1µF to GND. Typical ICC = 8mA (10mA max)." } ], "provenance": {@@ -216,5 +216,8 @@ "docs/max232dr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }