← Commit history

Initial commit: component/max202eim

Ray ·cdf5a3bb42 ·
2 files changed +94
README.mdadded+60
@@ -0,0 +1,60 @@+# MAX202EIM++**HGSEMI** · RS232 ICs · SOP-16++MAX202EIM from HGSEMI, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | C1+ | passive | Positive terminal of charge-pump flying capacitor C1 (0.1 µF, 16 V) used by the voltage doubler to generate V+. |+| 2 | V+ | power_out | Positive charge-pump output, approximately +10 V. Bypass to GND with a 0.1-µF capacitor (C3, 6.3 V or higher). Absolute maximum range VCC-0.3 V to +14 V. |+| 3 | C1- | passive | Negative terminal of charge-pump flying capacitor C1 (0.1 µF, 16 V). |+| 4 | C2+ | passive | Positive terminal of charge-pump flying capacitor C2 (0.1 µF, 16 V) used by the voltage inverter to generate V-. |+| 5 | C2- | passive | Negative terminal of charge-pump flying capacitor C2 (0.1 µF, 16 V). |+| 6 | V- | power_out | Negative charge-pump output, approximately -10 V. Bypass to GND with a 0.1-µF capacitor (C4, 16 V). Absolute maximum range -14 V to +0.3 V. |+| 7 | DOUT2 | output | RS-232 line driver 2 output. Swings between V+ and V- (approximately ±10 V) to drive an RS-232 line. Inverting: VOH ≈ 9 V (DIN=L), VOL ≈ -9 V (DIN=H). ±15-kV HBM ESD protected. Short-circuit current ±10 to ±60 mA. |+| 8 | RIN2 | input | RS-232 line receiver 2 input. Accepts ±30 V RS-232 signal levels. Input resistance 3-7 kΩ (typ 5 kΩ). Schmitt-trigger thresholds: VIT+ typ 1.7 V, VIT- typ 1.2 V, hysteresis typ 0.5 V. ±15-kV HBM ESD protected. |+| 9 | ROUT2 | output | CMOS/TTL-level receiver 2 output. Inverted with respect to RIN2. VOH ≥ 3.5 V at IOH = -1 mA; VOL ≤ 0.4 V at IOL = 1.6 mA. High when RIN2 is open or driven low. |+| 10 | DIN2 | input | CMOS/TTL-level line driver 2 input. VIH ≥ 2 V, VIL ≤ 0.8 V. Inverted at DOUT2. |+| 11 | DIN1 | input | CMOS/TTL-level line driver 1 input. VIH ≥ 2 V, VIL ≤ 0.8 V. Inverted at DOUT1. |+| 12 | ROUT1 | output | CMOS/TTL-level receiver 1 output. Inverted with respect to RIN1. VOH ≥ 3.5 V at IOH = -1 mA; VOL ≤ 0.4 V at IOL = 1.6 mA. High when RIN1 is open or driven low. |+| 13 | RIN1 | input | RS-232 line receiver 1 input. Accepts ±30 V RS-232 signal levels. Input resistance 3-7 kΩ (typ 5 kΩ). Schmitt-trigger thresholds: VIT+ typ 1.7 V, VIT- typ 1.2 V, hysteresis typ 0.5 V. ±15-kV HBM ESD protected. |+| 14 | DOUT1 | output | RS-232 line driver 1 output. Swings between V+ and V- (approximately ±10 V). Inverting: VOH ≈ 9 V (DIN=L), VOL ≈ -9 V (DIN=H). ±15-kV HBM ESD protected. Short-circuit current ±10 to ±60 mA. |+| 15 | GND | power_in | Device ground. Reference for all voltages. |+| 16 | VCC | power_in | Positive supply voltage input. Recommended 4.5 V to 5.5 V (nom 5 V). Absolute max 6 V. Supply current typ 8 mA, max 15 mA (no load). Bypass to GND with at least 0.1 µF. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | HGSEMI |+| Package | SOP-16 |+| Category | Interface |+| Pins | 16 |++## Ordering variants++- `MAX202EIM/TR`+- `MAX202EIMMAX202ECM/TR`+- `MAX202EIMMAX202EIN`+- `MAX202EIMMAX202ECN`+- `MAX202EIMT/TR`+- `MAX202EIMMAX202ECMT/TR`++## CAD (KiCad official)++- Symbol: `MAX202EIM`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOP-16 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [HGSEMI datasheet](docs/max202eim-datasheet.pdf) (13 pp, sha256 `d669a5a448fb5d49`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/max202eim-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "max202eim",+  "version": "0.1.0",+  "type": "component",+  "description": "HGSEMI RS232 ICs, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "max202eim"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "max202eim.kicad_sym",+    "max202eim.kicad_mod",+    "max202eim.glb",+    "max202eim.step",+    "max202eim.lbr",+    "docs/hero.png",+    "docs/max202eim-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file