component
MAX1726EUK33+T
Public Made by Adomby adom
Analog Devices Inc Maxim Integrated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -32,7 +32,7 @@ "number": "1", "name": "IN", "type": "power_in",- "description": "Supply voltage input. Operating range +2.5V to +12V (absolute maximum -14V to +14V referenced to GND). Bypass to GND with a 1\u00b5F ceramic capacitor; use 10\u00b5F if fast large transients are expected or the source is remote."+ "description": "Supply voltage input. Operating range +2.5V to +12V (absolute maximum -14V to +14V referenced to GND). Bypass to GND with a 1µF ceramic capacitor; use 10µF if fast large transients are expected or the source is remote." }, { "number": "2",@@ -44,7 +44,7 @@ "number": "3", "name": "OUT", "type": "power_out",- "description": "Regulated 3.3V output (factory-preset for the MAX1726EUK33). Guaranteed 20mA output current with 1.5% accuracy; requires a minimum 1\u00b5F output capacitor for stable operation over temperature. Foldback current limit typ. 40mA; short-circuit protected indefinitely."+ "description": "Regulated 3.3V output (factory-preset for the MAX1726EUK33). Guaranteed 20mA output current with 1.5% accuracy; requires a minimum 1µF output capacitor for stable operation over temperature. Foldback current limit typ. 40mA; short-circuit protected indefinitely." }, { "number": "4",@@ -56,7 +56,7 @@ "number": "5", "name": "SHDN", "type": "input",- "description": "Active-low shutdown input. Drive below VIL = 0.5V to disable the regulator (output pulled to ground, IQ drops from 2\u00b5A to 0.7\u00b5A); drive above VIH = 2V to enable. Tie SHDN to IN for always-on operation; for reverse-battery protection, drive SHDN through a 100k\u03a9 resistor. Absolute range -0.3V to (VIN + 0.3V)."+ "description": "Active-low shutdown input. Drive below VIL = 0.5V to disable the regulator (output pulled to ground, IQ drops from 2µA to 0.7µA); drive above VIH = 2V to enable. Tie SHDN to IN for always-on operation; for reverse-battery protection, drive SHDN through a 100kΩ resistor. Absolute range -0.3V to (VIN + 0.3V)." } ], "provenance": {@@ -142,5 +142,8 @@ "docs/max1726euk33-t-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }