component
MAX17205G+T
Public Made by Adomby adom
Analog Devices Inc Maxim Integrated Battery Management, TDFN-14-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+5475
README.md+114docs/hero.pngdocs/max17205g-t-datasheet.pdfmax17205g-t-etched.glbmax17205g-t-hero.glbmax17205g-t-hero.overlay.json+405max17205g-t.glbmax17205g-t.kicad_mod+317max17205g-t.kicad_sym+73max17205g-t.lbr+146max17205g-t.step+3936package.json+238page.json+244viewers/footprint.html+1viewers/symbol.html+1README.mdadded+114@@ -0,0 +1,114 @@+# MAX17205G+T++**Analog Devices Inc Maxim Integrated** · Battery Management · TDFN-14-EP(3x3)++MAX17205G+T from Analog Devices Inc Maxim Integrated, in a TDFN-14-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | REG3 | power_out | Internal 3.4V regulator output that must be bypassed with an external 0.47µF capacitor on the MAX17205 (connect REG3 to VBATT on the MAX17201). |+| 2 | CSP | input | Current measurement positive sense point that must be Kelvin-connected to the cell side of the sense resistor. |+| 3 | REG2 | power_out | Internal 1.8V regulator output that must be bypassed with an external 0.47µF capacitor to CSN, with REG2 to CSN rated -0.3V to +2.2V. |+| 4 | CSN | power_in | Device ground and current measurement negative sense point that must be Kelvin-connected to the load side of the sense resistor. |+| 5 | VBATT | power_in | Power-supply and battery voltage sense input connected to the positive terminal of the cell stack, bypassed with an RC filter to CSN. |+| 6 | CELL2 | input | Voltage sense input for the second or middle cell, where its series resistance sets the balancing current and it also serves as the external divider gate drive for CELLx pack measurement. |+| 7 | CELL1 | input | Voltage sense input for the bottom cell, where its series resistance sets the balancing current. |+| 8 | ALRT1 | output | Programmable open-drain alert output that requires an external pullup to generate a logic-high, with a continuous sink current limit of 20mA. |+| 9 | AIN1 | input | Auxiliary voltage input 1 that receives the voltage from the external thermal-measurement network. |+| 10 | AIN2 | input | Auxiliary voltage input 2 that receives the voltage from the external thermal-measurement network. |+| 11 | OD/SCL | input | Input-only pin that serves as the I2C serial clock or the 1-Wire speed selection, with an internal pulldown used to sense pack disconnection. |+| 12 | DQ/SDA | bidirectional | Serial data input/output for both 1-Wire and I2C modes using an open-drain driver, with an internal pulldown used to sense pack disconnection and a continuous sink current limit of 20mA. |+| 13 | CELLx | input | High-impedance voltage measurement channel that connects to an external voltage divider for measuring cell stacks larger than 4S. |+| 14 | THRM | output | Thermistor bias connection to the high side of the thermistor divider, biased to the REG3 voltage during AIN1 and AIN2 measurement, with a continuous source current limit of 20mA. |+| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Analog Devices Inc Maxim Integrated |+| Package | TDFN-14-EP(3x3) |+| Category | Power Management (PMIC) |+| Pins | 15 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Supply Voltage VBATT (MAX17205/MAX17215) | VBATT | 4.2 | | 20 | V | MAX17205/MAX17215 (Notes 1, 2) | 14 |+| Shutdown Supply Current, multiple cell | IDD0 | | 1.5 | 3 | μA | Multiple cell, shutdown mode (Note 3) | 14 |+| Hibernate Supply Current, multiple cell | IDD1 | | 12 | 25 | μA | Hibernate mode average current, multiple cell (Note 3) | 14 |+| Active Supply Current, MAX17205/MAX17215 | IDD2 | | 25 | 40 | μA | Not including thermistor measurement current (Note 3) | 14 |+| Voltage Measurement Range, individual cell | VFS | 2.3 | | 4.9 | V | Individual cell | 14 |+| Voltage Measurement Range, VBATT pin | VBFS | 4.2 | | 20 | V | VBATT pin | 14 |+| Voltage Measurement Range, CELLx pin | VXFS | 0.92 | | 2 | V | CELLx pin | 14 |+| Voltage Measurement Error | VGERR | -12.5 | | 12.5 | mV | TA = +25°C (Note 5) | 14 |+| Voltage Measurement Error | VGERR | -25 | | 25 | mV | (Note 5) | 14 |+| Total VBATT Voltage Measurement Error | VBGERR | -30 | | 30 | mV | TA = +25°C (Note 6) | 14 |+| Total VBATT Voltage Measurement Error | VBGERR | -100 | | 100 | mV | (Note 6) | 14 |+| CELLx Voltage Measurement Error | VXGERR | -0.2 | | 0.2 | % of reading | TA = +25°C (Note 7) | 14 |+| CELLx Voltage Measurement Error | VXGERR | -0.5 | | 0.5 | % of reading | (Note 7) | 14 |+| Current Measurement Offset Error | IOERR | -2 | -0.7 | 0.5 | μV | VCSP = 0V, long-term average (Note 2) | 14 |+| Current Measurement Gain Error | IGERR | -1 | | 1 | % of reading | CSP between -50mV and +50mV | 14 |+| Current Measurement Range | IFS | -51.2 | | 51.2 | mV | | 15 |+| Internal Temperature Measurement Error | TIGERR | -1 | | 1 | °C | | 15 |+| Auxiliary Ratiometric Measurement Error | TEGERR | -0.5 | | 0.5 | % of reading | | 15 |+| Battery-Detach Detection Threshold | VDET | 91 | 95 | 99 | % | AIN1 as a fraction of the voltage of THRM, AIN1 rising (Note 1) | 15 |+| Output Drive Low, ALRT1, SDA/DQ | VOL | | | 0.4 | V | IOL = 4mA, VREG3 = 2.3V | 15 |+| Input Logic-High, SCL/OD, SDA/DQ | VIH | 1.5 | | | V | | 15 |+| Input Logic-Low, SCL/OD, SDA/DQ | VIL | | | 0.44 | V | | 15 |+| Overcurrent Threshold Offset Error | OCOE | -2.5 | | 2.5 | mV | OD or SC comparator | 15 |+| Overcurrent Threshold Gain Error | OCGE | -5 | | 5 | % of threshold | OD or SC comparator | 15 |+| Leakage Current, AIN1, AIN2 | ILEAK | -0.2 | | 0.2 | μA | AIN1, AIN2 < REG3 | 15 |+| Leakage Current, CELLx | ILEAK | -60 | | 60 | nA | VCELLx < 2.0V (Note 2) | 15 |+| Leakage Current, CELL1, CELL2, CSN, CSP, ALRT1, THRM | ILEAK | -1 | | 1 | μA | VALRT1 < 15V, THRM < REG3 | 16 |+| Cell-Balancing Resistance | RBAL | 3 | 9 | 20 | Ω | VBATT = 12.6V, IBAL = 50mA, between VBATT-CELL2, CELL2-CELL1, and CELL1-CSN (TDFN) or CELL1-GND (WLP) | 16 |+| Input Pulldown Current | IPD | 0.05 | 0.2 | 0.4 | μA | VSDA, VSCL pins = 0.4V | 16 |+| Time-Base Accuracy | tERR | -1 | | 1 | % | TA= +25°C | 16 |+| SHA Calculation Time | tSHA | | 4.5 | 10 | ms | | 16 |+| Programming Supply Current | IPROG | | 4 | 10 | mA | Current from VBATT for block programming | 16 |+| Block Programming Time | tBLOCK | | 368 | 7360 | ms | | 16 |+| Page Programming Time | tUPDATE | | 64 | 1280 | ms | SHA secret update or learned parameters update | 16 |+| SCL Clock Frequency | fSCL | 0 | | 400 | kHz | (Note 10) | 17 |+| Data Hold Time | tHD:DAT | 0 | | 0.9 | µs | (Notes 12, 13) | 17 |+| Rise Time of Both SDA and SCL Signals | tR | 5 | | 300 | ns | | 17 |+| Fall Time of Both SDA and SCL Signals | tF | 5 | | 300 | ns | | 18 |+| VBATT to CSN (MAX17205/MAX17215) | VBATT | -0.3 | | 22 | V | | 13 |+| ALRT1 to CSN | ALRT1 | -0.3 | | 17 | V | | 13 |+| REG3 to CSN (MAX17205/MAX17215) | REG3 | -0.3 | | 6 | V | | 13 |+| AIN1, AIN2 to CSN | AIN1, AIN2 | -0.3 | | 6 | V | | 13 |+| REG2 to CSN | REG2 | -0.3 | | 2.2 | V | | 13 |+| CSP to CSN | CSP | -2 | | 2 | V | | 13 |+| DQ/SDA, OD/SCL to CSN | DQ/SDA, OD/SCL | -0.3 | | 6 | V | | 13 |+| Continuous Source Current for THRM | | | | 20 | mA | | 13 |+| Continuous Sink Current for DQ/SDA, ALRT1 | | | | 20 | mA | | 13 |+| Continuous Sink Current for BATT, CELL1, CELL2 | | | | 50 | mA | | 13 |+| Operating Temperature Range | TA | -40 | | 85 | °C | | 13 |+| Storage Temperature Range | | -55 | | 125 | °C | | 13 |+| Lead Temperature (soldering 10s) | | | | 300 | °C | soldering 10s | 13 |+| Soldering Temperature (reflow) | | | | 260 | °C | | 13 |+| Thermal Resistance, Single Layer Board, Junction-to-Ambient (θJA) | θJA | | 54 | | °C/W | TDFN, single layer board | 13 |+| Thermal Resistance, Single Layer Board, Junction-to-Case (θJC) | θJC | | 8 | | °C/W | TDFN, single layer board | 13 |+| Thermal Resistance, Four Layer Board, Junction-to-Ambient (θJA) | θJA | | 41 | | °C/W | TDFN, four layer board | 13 |+| Thermal Resistance, Four Layer Board, Junction-to-Case (θJC) | θJC | | 8 | | °C/W | TDFN, four layer board | 13 |++## CAD (KiCad official)++- Symbol: `MAX17205G+T`+- Footprint: `Package_DFN_QFN:DFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mm`+- 3D model: TDFN-14-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `max17205g-t-etched.step` / `max17205g-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max17205g-t.step` / `max17205g-t.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Analog Devices Inc Maxim Integrated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588912115415048192) (115 pp, sha256 `7a77e041ceb5fd46`, retrieved 2026-10-20, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/max17205g-t-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/max17205g-t-datasheet.pdfadded⋯ 1 unchanged line ⋯
max17205g-t-etched.glbadded⋯ 1 unchanged line ⋯
max17205g-t-hero.glbadded⋯ 1 unchanged line ⋯
max17205g-t-hero.overlay.jsonadded+405@@ -0,0 +1,405 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "MAX17205G+T",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 15,+ "span_mm": 4.75,+ "dash_mm": 0.12,+ "gap_mm": 0.072,+ "pad_stroke_mm": 0.03+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 3,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 14,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.292,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -1.5,+ 1.5,+ -1.49,+ 1.49+ ],+ "pads_bbox_mm": [+ -1.825,+ 1.825,+ -1.325,+ 1.325+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "max17205g-t-etched.glb",+ "glb_sha256": "6ea499edde7641fe7315895605a40a6717112745c834a40bf6b32fbd991aaeda",+ "footprint": "max17205g-t.kicad_mod",+ "footprint_sha256": "1df288f2daf1ff4f8fdafdfafbd6db19b892c6f30d0299adb123050a790f90b7",+ "pins": "page.json component.pins",+ "pins_sha256": "2e84bcb9d9fa6396a8923a36ac24cee8ff3a06aaa90b699c92366ae763bd408a"+ },+ "generator": "adom-wiki 1.7.76 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "REG3",+ "x": -1.925,+ "y": -1.2,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "2",+ "text": "CSP",+ "x": -1.925,+ "y": -0.8,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "3",+ "text": "REG2",+ "x": -1.925,+ "y": -0.4,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "4",+ "text": "CSN",+ "x": -1.925,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "5",+ "text": "VBATT",+ "x": -1.925,+ "y": 0.4,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "6",+ "text": "CELL2",+ "x": -1.925,+ "y": 0.8,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "7",+ "text": "CELL1",+ "x": -1.925,+ "y": 1.2,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "8",+ "text": "ALRT1",+ "x": 1.925,+ "y": 1.2,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "9",+ "text": "AIN1",+ "x": 1.925,+ "y": 0.8,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "10",+ "text": "AIN2",+ "x": 1.925,+ "y": 0.4,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "11",+ "text": "OD/SCL",+ "x": 1.925,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "12",+ "text": "DQ/SDA",+ "x": 1.925,+ "y": -0.4,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "13",+ "text": "CELLx",+ "x": 1.925,+ "y": -0.8,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "14",+ "text": "THRM",+ "x": 1.925,+ "y": -1.2,+ "align": "left",+ "vertical": false,+ "h": 0.2+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "rect",+ "center_mm": [+ -1.475,+ -1.2+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "rect",+ "center_mm": [+ -1.475,+ -0.8+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "rect",+ "center_mm": [+ -1.475,+ -0.4+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "rect",+ "center_mm": [+ -1.475,+ 0.0+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "rect",+ "center_mm": [+ -1.475,+ 0.4+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "rect",+ "center_mm": [+ -1.475,+ 0.8+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "rect",+ "center_mm": [+ -1.475,+ 1.2+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "rect",+ "center_mm": [+ 1.475,+ 1.2+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "rect",+ "center_mm": [+ 1.475,+ 0.8+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "rect",+ "center_mm": [+ 1.475,+ 0.4+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "rect",+ "center_mm": [+ 1.475,+ 0.0+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "rect",+ "center_mm": [+ 1.475,+ -0.4+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "rect",+ "center_mm": [+ 1.475,+ -0.8+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "rect",+ "center_mm": [+ 1.475,+ -1.2+ ],+ "size_mm": [+ 0.7,+ 0.25+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 1.78,+ 2.35+ ],+ "rot": 0.0+ }+ ]+}
max17205g-t.glbadded⋯ 1 unchanged line ⋯
max17205g-t.kicad_modadded+317@@ -0,0 +1,317 @@+(footprint "DFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mm"+ (version 20260206)+ (generator "pcbnew")+ (generator_version "10.0")+ (layer "F.Cu")+ (descr "DD Package; 14-Lead Plastic DFN (3mm x 3mm) (http://pdfserv.maximintegrated.com/land_patterns/90-0063.PDF)")+ (tags "DFN 0.40")+ (property "Reference" "REF**"+ (at 0 -2.55 0)+ (layer "F.SilkS")+ (uuid "46771041-a444-47d3-99f3-8f004e73e894")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "DFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mm"+ (at 0 2.55 0)+ (layer "F.Fab")+ (uuid "65086432-5bce-4c75-9776-fe517bdef393")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Datasheet" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "bb8162d5-f2c9-4a39-86e8-35cd602bef91")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (property "Description" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "cc39e329-f6e6-4ee1-819a-1283e8c36dd4")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -1.5 -1.61)+ (end 1.5 -1.61)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "2167e68e-9e89-48fd-b84c-0220085f7447")+ )+ (fp_line+ (start -1.5 1.61)+ (end 1.5 1.61)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "9d3b0ef0-8ab0-40db-a2f0-b7aed184eb63")+ )+ (fp_poly+ (pts+ (xy -2.01 -1.51) (xy -2.49 -1.51) (xy -2.01 -1.99) (xy -2.01 -1.51)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ (uuid "73f15e15-db0c-4dc3-b1c5-9e9e0b27ebe4")+ )+ (fp_line+ (start -2 -1.8)+ (end -2 1.8)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "67baf303-2465-4ef0-837b-7bb0d85f7fc5")+ )+ (fp_line+ (start -2 -1.8)+ (end 2 -1.8)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "db5bc58e-2616-4570-b435-5d7c9f1d68a5")+ )+ (fp_line+ (start -2 1.8)+ (end 2 1.8)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "c629ed4b-e1ab-4996-80ee-031b731151a2")+ )+ (fp_line+ (start 2 -1.8)+ (end 2 1.8)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "300745c4-ae3c-4c8d-b6d6-be36feb936b5")+ )+ (fp_line+ (start -1.5 -0.75)+ (end -0.75 -1.5)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "42475192-a679-4e9e-94fe-2a32e6e539e4")+ )+ (fp_line+ (start -1.5 1.5)+ (end -1.5 -0.75)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "4ca7655b-417b-4ace-abc4-c0569df5aa52")+ )+ (fp_line+ (start -0.75 -1.5)+ (end 1.5 -1.5)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "0c80f386-ccd6-4a58-bc89-21fc6e525141")+ )+ (fp_line+ (start 1.5 -1.5)+ (end 1.5 1.5)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "6567a694-2ecb-40b4-9e0c-096b601bcc10")+ )+ (fp_line+ (start 1.5 1.5)+ (end -1.5 1.5)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "0199dd26-2a7f-4de2-82e4-8a8b14e06949")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 0)+ (layer "F.Fab")+ (uuid "070b4fc1-194c-4ede-ae6a-04e8fcd60fbe")+ (effects+ (font+ (size 0.6 0.6)+ (thickness 0.09)+ )+ )+ )+ (pad "" smd rect+ (at -0.445 -0.5875)+ (size 0.7 0.97)+ (layers "F.Paste")+ (uuid "61e76daf-d455-46c5-9ac7-de55c14ff378")+ )+ (pad "" smd rect+ (at -0.445 0.5875)+ (size 0.7 0.97)+ (layers "F.Paste")+ (uuid "2ba656a3-6447-4aee-885c-3f6c366f306c")+ )+ (pad "" smd rect+ (at 0.45 -0.5875)+ (size 0.7 0.97)+ (layers "F.Paste")+ (uuid "5925faac-88e3-4211-95cf-59dcda57a4d7")+ )+ (pad "" smd rect+ (at 0.45 0.5875)+ (size 0.7 0.97)+ (layers "F.Paste")+ (uuid "80c0228c-be83-4d4d-afbf-91a78bbe59dc")+ )+ (pad "1" smd rect+ (at -1.475 -1.2)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "dc309ae4-3ea8-4f1f-91d6-aa3abd80ce44")+ )+ (pad "2" smd rect+ (at -1.475 -0.8)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "b9bd4cbf-9374-4c9b-b944-53b605c1e2a3")+ )+ (pad "3" smd rect+ (at -1.475 -0.4)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "6f95232a-c5e3-4b33-b710-fdc9c4703dd3")+ )+ (pad "4" smd rect+ (at -1.475 0)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "4257cd63-2f4c-416b-b269-f961b1d928e5")+ )+ (pad "5" smd rect+ (at -1.475 0.4)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "a094e801-8aa3-4bde-ab09-c9c863c2b9b4")+ )+ (pad "6" smd rect+ (at -1.475 0.8)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "bb7c2736-22ff-45a7-bf71-4007667f5c79")+ )+ (pad "7" smd rect+ (at -1.475 1.2)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "b1c56b0a-979b-4e71-b7f2-4949ac85ff21")+ )+ (pad "8" smd rect+ (at 1.475 1.2)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "bbbb302c-a9d0-434a-b286-cc18aa4f1124")+ )+ (pad "9" smd rect+ (at 1.475 0.8)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "eec6cb55-eccd-4f11-90af-52f032624e70")+ )+ (pad "10" smd rect+ (at 1.475 0.4)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "d199b993-6f3d-4468-8427-c867a0626122")+ )+ (pad "11" smd rect+ (at 1.475 0)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "d4692620-60e0-47fc-b0ec-0344e80da98a")+ )+ (pad "12" smd rect+ (at 1.475 -0.4)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "71d5c26f-08c3-4347-8c5b-a3b3601b7c8c")+ )+ (pad "13" smd rect+ (at 1.475 -0.8)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "a2dd5e66-c26a-47ee-ab2c-13ef5bedb6b4")+ )+ (pad "14" smd rect+ (at 1.475 -1.2)+ (size 0.7 0.25)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "be33819f-4340-481b-b9f0-c9b1046025e6")+ )+ (pad "15" smd rect+ (at 0 0)+ (size 1.78 2.35)+ (layers "F.Cu" "F.Mask")+ (uuid "32c61589-9a22-4902-954c-806687c08596")+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_DFN_QFN.3dshapes/DFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
max17205g-t.kicad_symadded+73@@ -0,0 +1,73 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "MAX17205G+T" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 12.70 0) (effects (font (size 1.27 1.27))))+ (property "Value" "MAX17205G+T" (at 0 -15.24 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "MAX17205G+T_0_1"+ (rectangle (start -12.70 10.16) (end 12.70 -12.70)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "MAX17205G+T_1_1"+ (pin power_out line (at -17.78 7.62 0) (length 5.08)+ (name "REG3" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 5.08 0) (length 5.08)+ (name "CSP" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin power_out line (at -17.78 2.54 0) (length 5.08)+ (name "REG2" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 0.00 0) (length 5.08)+ (name "CSN" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -2.54 0) (length 5.08)+ (name "VBATT" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -5.08 0) (length 5.08)+ (name "CELL2" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -7.62 0) (length 5.08)+ (name "CELL1" (effects (font (size 1.27 1.27))))+ (number "7" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -10.16 0) (length 5.08)+ (name "ALRT1" (effects (font (size 1.27 1.27))))+ (number "8" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at 17.78 7.62 180) (length 5.08)+ (name "EP" (effects (font (size 1.27 1.27))))+ (number "15" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 5.08 180) (length 5.08)+ (name "THRM" (effects (font (size 1.27 1.27))))+ (number "14" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 2.54 180) (length 5.08)+ (name "CELLx" (effects (font (size 1.27 1.27))))+ (number "13" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 0.00 180) (length 5.08)+ (name "DQ/SDA" (effects (font (size 1.27 1.27))))+ (number "12" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -2.54 180) (length 5.08)+ (name "OD/SCL" (effects (font (size 1.27 1.27))))+ (number "11" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -5.08 180) (length 5.08)+ (name "AIN2" (effects (font (size 1.27 1.27))))+ (number "10" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -7.62 180) (length 5.08)+ (name "AIN1" (effects (font (size 1.27 1.27))))+ (number "9" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
max17205g-t.lbradded+146@@ -0,0 +1,146 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="DFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mm">+ <description>DFN-14-1EP, 3 x 3 mm, 0.4 mm pitch. DD Package; 14-Lead Plastic DFN (3mm x 3mm)</description>+ <smd name="1" x="-1.4750" y="1.2000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="2" x="-1.4750" y="0.8000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="3" x="-1.4750" y="0.4000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="4" x="-1.4750" y="-0.0000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="5" x="-1.4750" y="-0.4000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="6" x="-1.4750" y="-0.8000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="7" x="-1.4750" y="-1.2000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="8" x="1.4750" y="-1.2000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="9" x="1.4750" y="-0.8000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="10" x="1.4750" y="-0.4000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="11" x="1.4750" y="-0.0000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="12" x="1.4750" y="0.4000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="13" x="1.4750" y="0.8000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="14" x="1.4750" y="1.2000" dx="0.7000" dy="0.2500" layer="1"/>+ <smd name="15" x="0.0000" y="-0.0000" dx="1.7800" dy="2.3500" layer="1" cream="no"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-2.0100" y="1.5100"/>+ <vertex x="-2.4900" y="1.5100"/>+ <vertex x="-2.0100" y="1.9900"/>+ <vertex x="-2.0100" y="1.5100"/>+ </polygon>+ <wire x1="-1.5000" y1="1.6100" x2="1.5000" y2="1.6100" width="0.1200" layer="21"/>+ <wire x1="-1.5000" y1="-1.6100" x2="1.5000" y2="-1.6100" width="0.1200" layer="21"/>+ <wire x1="-1.5000" y1="0.7500" x2="-0.7500" y2="1.5000" width="0.1000" layer="51"/>+ <wire x1="-1.5000" y1="-1.5000" x2="-1.5000" y2="0.7500" width="0.1000" layer="51"/>+ <wire x1="-0.7500" y1="1.5000" x2="1.5000" y2="1.5000" width="0.1000" layer="51"/>+ <wire x1="1.5000" y1="1.5000" x2="1.5000" y2="-1.5000" width="0.1000" layer="51"/>+ <wire x1="1.5000" y1="-1.5000" x2="-1.5000" y2="-1.5000" width="0.1000" layer="51"/>+ <text x="0" y="2.210" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-2.210" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="MAX17205G+T">+ <wire x1="-12.7" y1="10.16" x2="12.7" y2="10.16" width="0.254" layer="94"/>+ <wire x1="12.7" y1="10.16" x2="12.7" y2="-12.7" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-12.7" x2="-12.7" y2="-12.7" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-12.7" x2="-12.7" y2="10.16" width="0.254" layer="94"/>+ <text x="0.0000" y="12.7000" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-15.2400" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="REG3" x="-17.78" y="7.62" length="middle" direction="out"/>+ <pin name="CSP" x="-17.78" y="5.08" length="middle" direction="in"/>+ <pin name="REG2" x="-17.78" y="2.54" length="middle" direction="out"/>+ <pin name="CSN" x="-17.78" y="0" length="middle" direction="pwr"/>+ <pin name="VBATT" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+ <pin name="CELL2" x="-17.78" y="-5.08" length="middle" direction="in"/>+ <pin name="CELL1" x="-17.78" y="-7.62" length="middle" direction="in"/>+ <pin name="ALRT1" x="-17.78" y="-10.16" length="middle" direction="out"/>+ <pin name="EP" x="17.78" y="7.62" length="middle" direction="pas" rot="R180"/>+ <pin name="THRM" x="17.78" y="5.08" length="middle" direction="out" rot="R180"/>+ <pin name="CELLx" x="17.78" y="2.54" length="middle" direction="in" rot="R180"/>+ <pin name="DQ/SDA" x="17.78" y="0" length="middle" direction="io" rot="R180"/>+ <pin name="OD/SCL" x="17.78" y="-2.54" length="middle" direction="in" rot="R180"/>+ <pin name="AIN2" x="17.78" y="-5.08" length="middle" direction="in" rot="R180"/>+ <pin name="AIN1" x="17.78" y="-7.62" length="middle" direction="in" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="MAX17205G+T" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="MAX17205G+T" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="DFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mm">+ <connects>+ <connect gate="G$1" pin="REG3" pad="1"/>+ <connect gate="G$1" pin="CSP" pad="2"/>+ <connect gate="G$1" pin="REG2" pad="3"/>+ <connect gate="G$1" pin="CSN" pad="4"/>+ <connect gate="G$1" pin="VBATT" pad="5"/>+ <connect gate="G$1" pin="CELL2" pad="6"/>+ <connect gate="G$1" pin="CELL1" pad="7"/>+ <connect gate="G$1" pin="ALRT1" pad="8"/>+ <connect gate="G$1" pin="EP" pad="15"/>+ <connect gate="G$1" pin="THRM" pad="14"/>+ <connect gate="G$1" pin="CELLx" pad="13"/>+ <connect gate="G$1" pin="DQ/SDA" pad="12"/>+ <connect gate="G$1" pin="OD/SCL" pad="11"/>+ <connect gate="G$1" pin="AIN2" pad="10"/>+ <connect gate="G$1" pin="AIN1" pad="9"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
max17205g-t.stepadded+3936@@ -0,0 +1,3936 @@+ISO-10303-21;+HEADER;+/* DFN-14-1EP_3x3mm_Pitch0.4mm.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2017, kicad StepUp+ * + * This program is free software: you can redistribute it and/or modify+ * it under the terms of the GNU General Public License as published by+ * the Free Software Foundation, either version 3 of the License, or+ * any later version.+ * + * This program is distributed in the hope that it will be useful,+ * but WITHOUT ANY WARRANTY; without even the implied warranty of+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the+ * GNU General Public License for more details.+ * + * You should have received a copy of the GNU General Public License+ * along with this program. If not, see http://www.gnu.org/licenses/.+ * + * As a special exception, if you create a design which uses this symbol,+ * and embed this symbol or unaltered portions of this symbol into the design,+ * this symbol does not by itself cause the resulting design to be covered by+ * the GNU General Public License.+ * This exception does not however invalidate any other reasons why the design+ * itself might be covered by the GNU General Public License. + * If you modify this symbol, you may extend this exception to your version of the symbol,+ * but you are not obligated to do so.+ * If you do not wish to do so, delete this exception statement from your version+ * Risk disclaimer+ * *USE 3D CAD DATA AT YOUR OWN RISK*+ * *DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.*+ * + */++FILE_DESCRIPTION(+/* description */ ('model of DFN-14-1EP_3x3mm_Pitch0.4mm'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'DFN-14-1EP_3x3mm_Pitch0.4mm.step',+/* time_stamp */ '2017-05-28T12:32:37',+/* author */ ('kicad StepUp','ksu'),+/* organization */ ('FreeCAD'),+/* preprocessor_version */ 'OCC',+/* originating_system */ 'kicad StepUp',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN_CC2 { 1 2 10303 214 -1 1 5 4 }'));+ENDSEC;++DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('committee draft',+'automotive_design',1997,#2);+#2 = APPLICATION_CONTEXT(+'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('DFN_14_1EP_3x3mm_Pitch04mm','DFN_14_1EP_3x3mm_Pitch04mm',+'',(#8));+#8 = MECHANICAL_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#3157);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = MANIFOLD_SOLID_BREP('',#16);+#16 = CLOSED_SHELL('',(#17,#65,#96,#120,#144,#168,#185,#680,#872,#896,+#936,#1121,#1145,#1185,#1218,#1242,#1275,#1315,#1339,#1379,#1412,+#1436,#1469,#1509,#1533,#1573,#1606,#1630,#1663,#1703,#1727,#1767,+#1800,#1824,#1857,#1897,#1921,#1961,#1994,#2018,#2051,#2091,#2115,+#2155,#2188,#2212,#2245,#2285,#2309,#2349,#2382,#2406,#2439,#2456,+#2479,#2496,#2513,#2530,#2547,#2564,#2581,#2598,#2615,#2627,#2644,+#2661,#2678,#2695,#2712,#2729,#2746,#2763,#2775,#2792,#2804,#2821,+#2833,#2850,#2862,#2879,#2891,#2908,#2920,#2937,#2949,#2966,#2978,+#2995,#3007,#3024,#3036,#3053,#3065,#3082,#3094,#3111,#3123,#3148));+#17 = ADVANCED_FACE('',(#18),#60,.F.);+#18 = FACE_BOUND('',#19,.F.);+#19 = EDGE_LOOP('',(#20,#30,#38,#46,#54));+#20 = ORIENTED_EDGE('',*,*,#21,.T.);+#21 = EDGE_CURVE('',#22,#24,#26,.T.);+#22 = VERTEX_POINT('',#23);+#23 = CARTESIAN_POINT('',(-0.85,0.95,0.));+#24 = VERTEX_POINT('',#25);+#25 = CARTESIAN_POINT('',(-0.85,-1.15,0.));+#26 = LINE('',#27,#28);+#27 = CARTESIAN_POINT('',(-0.85,0.95,0.));+#28 = VECTOR('',#29,1.);+#29 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#30 = ORIENTED_EDGE('',*,*,#31,.T.);+#31 = EDGE_CURVE('',#24,#32,#34,.T.);+#32 = VERTEX_POINT('',#33);+#33 = CARTESIAN_POINT('',(0.85,-1.15,0.));+#34 = LINE('',#35,#36);+#35 = CARTESIAN_POINT('',(-0.85,-1.15,0.));+#36 = VECTOR('',#37,1.);+#37 = DIRECTION('',(1.,9.143013143972E-17,0.));+#38 = ORIENTED_EDGE('',*,*,#39,.T.);+#39 = EDGE_CURVE('',#32,#40,#42,.T.);+#40 = VERTEX_POINT('',#41);+#41 = CARTESIAN_POINT('',(0.85,1.15,0.));+#42 = LINE('',#43,#44);+#43 = CARTESIAN_POINT('',(0.85,-1.15,0.));+#44 = VECTOR('',#45,1.);+#45 = DIRECTION('',(-2.22044604925E-16,1.,0.));+#46 = ORIENTED_EDGE('',*,*,#47,.T.);+#47 = EDGE_CURVE('',#40,#48,#50,.T.);+#48 = VERTEX_POINT('',#49);+#49 = CARTESIAN_POINT('',(-0.65,1.15,0.));+#50 = LINE('',#51,#52);+#51 = CARTESIAN_POINT('',(0.85,1.15,0.));+#52 = VECTOR('',#53,1.);+#53 = DIRECTION('',(-1.,-2.22044604925E-16,0.));+#54 = ORIENTED_EDGE('',*,*,#55,.T.);+#55 = EDGE_CURVE('',#48,#22,#56,.T.);+#56 = LINE('',#57,#58);+#57 = CARTESIAN_POINT('',(-0.65,1.15,0.));+#58 = VECTOR('',#59,1.);+#59 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#60 = PLANE('',#61);+#61 = AXIS2_PLACEMENT_3D('',#62,#63,#64);+#62 = CARTESIAN_POINT('',(1.36838916592E-02,-1.814258600839E-02,0.));+#63 = DIRECTION('',(0.,0.,1.));+#64 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#65 = ADVANCED_FACE('',(#66),#91,.F.);+#66 = FACE_BOUND('',#67,.F.);+#67 = EDGE_LOOP('',(#68,#69,#77,#85));+#68 = ORIENTED_EDGE('',*,*,#21,.F.);+#69 = ORIENTED_EDGE('',*,*,#70,.T.);+#70 = EDGE_CURVE('',#22,#71,#73,.T.);+#71 = VERTEX_POINT('',#72);+#72 = CARTESIAN_POINT('',(-0.85,0.95,2.E-02));+#73 = LINE('',#74,#75);+#74 = CARTESIAN_POINT('',(-0.85,0.95,0.));+#75 = VECTOR('',#76,1.);+#76 = DIRECTION('',(0.,0.,1.));+#77 = ORIENTED_EDGE('',*,*,#78,.F.);+#78 = EDGE_CURVE('',#79,#71,#81,.T.);+#79 = VERTEX_POINT('',#80);+#80 = CARTESIAN_POINT('',(-0.85,-1.15,2.E-02));+#81 = LINE('',#82,#83);+#82 = CARTESIAN_POINT('',(-0.85,1.22,2.E-02));+#83 = VECTOR('',#84,1.);+#84 = DIRECTION('',(-2.22044604925E-16,1.,0.));+#85 = ORIENTED_EDGE('',*,*,#86,.F.);+#86 = EDGE_CURVE('',#24,#79,#87,.T.);+#87 = LINE('',#88,#89);+#88 = CARTESIAN_POINT('',(-0.85,-1.15,0.));+#89 = VECTOR('',#90,1.);+#90 = DIRECTION('',(0.,0.,1.));+#91 = PLANE('',#92);+#92 = AXIS2_PLACEMENT_3D('',#93,#94,#95);+#93 = CARTESIAN_POINT('',(-0.85,0.95,0.));+#94 = DIRECTION('',(1.,2.22044604925E-16,0.));+#95 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#96 = ADVANCED_FACE('',(#97),#115,.F.);+#97 = FACE_BOUND('',#98,.F.);+#98 = EDGE_LOOP('',(#99,#100,#101,#109));+#99 = ORIENTED_EDGE('',*,*,#31,.F.);+#100 = ORIENTED_EDGE('',*,*,#86,.T.);+#101 = ORIENTED_EDGE('',*,*,#102,.F.);+#102 = EDGE_CURVE('',#103,#79,#105,.T.);+#103 = VERTEX_POINT('',#104);+#104 = CARTESIAN_POINT('',(0.85,-1.15,2.E-02));+#105 = LINE('',#106,#107);+#106 = CARTESIAN_POINT('',(-1.17,-1.15,2.E-02));+#107 = VECTOR('',#108,1.);+#108 = DIRECTION('',(-1.,-9.143013143972E-17,0.));+#109 = ORIENTED_EDGE('',*,*,#110,.F.);+#110 = EDGE_CURVE('',#32,#103,#111,.T.);+#111 = LINE('',#112,#113);+#112 = CARTESIAN_POINT('',(0.85,-1.15,0.));+#113 = VECTOR('',#114,1.);+#114 = DIRECTION('',(0.,0.,1.));+#115 = PLANE('',#116);+#116 = AXIS2_PLACEMENT_3D('',#117,#118,#119);+#117 = CARTESIAN_POINT('',(-0.85,-1.15,0.));+#118 = DIRECTION('',(-9.143013143972E-17,1.,0.));+#119 = DIRECTION('',(1.,9.143013143972E-17,0.));+#120 = ADVANCED_FACE('',(#121),#139,.F.);+#121 = FACE_BOUND('',#122,.F.);+#122 = EDGE_LOOP('',(#123,#124,#125,#133));+#123 = ORIENTED_EDGE('',*,*,#39,.F.);+#124 = ORIENTED_EDGE('',*,*,#110,.T.);+#125 = ORIENTED_EDGE('',*,*,#126,.F.);+#126 = EDGE_CURVE('',#127,#103,#129,.T.);+#127 = VERTEX_POINT('',#128);+#128 = CARTESIAN_POINT('',(0.85,1.15,2.E-02));+#129 = LINE('',#130,#131);+#130 = CARTESIAN_POINT('',(0.85,0.17,2.E-02));+#131 = VECTOR('',#132,1.);+#132 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#133 = ORIENTED_EDGE('',*,*,#134,.F.);+#134 = EDGE_CURVE('',#40,#127,#135,.T.);+#135 = LINE('',#136,#137);+#136 = CARTESIAN_POINT('',(0.85,1.15,0.));+#137 = VECTOR('',#138,1.);+#138 = DIRECTION('',(0.,0.,1.));+#139 = PLANE('',#140);+#140 = AXIS2_PLACEMENT_3D('',#141,#142,#143);+#141 = CARTESIAN_POINT('',(0.85,-1.15,0.));+#142 = DIRECTION('',(-1.,-2.22044604925E-16,0.));+#143 = DIRECTION('',(-2.22044604925E-16,1.,0.));+#144 = ADVANCED_FACE('',(#145),#163,.F.);+#145 = FACE_BOUND('',#146,.F.);+#146 = EDGE_LOOP('',(#147,#148,#149,#157));+#147 = ORIENTED_EDGE('',*,*,#47,.F.);+#148 = ORIENTED_EDGE('',*,*,#134,.T.);+#149 = ORIENTED_EDGE('',*,*,#150,.F.);+#150 = EDGE_CURVE('',#151,#127,#153,.T.);+#151 = VERTEX_POINT('',#152);+#152 = CARTESIAN_POINT('',(-0.65,1.15,2.E-02));+#153 = LINE('',#154,#155);+#154 = CARTESIAN_POINT('',(-0.32,1.15,2.E-02));+#155 = VECTOR('',#156,1.);+#156 = DIRECTION('',(1.,2.22044604925E-16,0.));+#157 = ORIENTED_EDGE('',*,*,#158,.F.);+#158 = EDGE_CURVE('',#48,#151,#159,.T.);+#159 = LINE('',#160,#161);+#160 = CARTESIAN_POINT('',(-0.65,1.15,0.));+#161 = VECTOR('',#162,1.);+#162 = DIRECTION('',(0.,0.,1.));+#163 = PLANE('',#164);+#164 = AXIS2_PLACEMENT_3D('',#165,#166,#167);+#165 = CARTESIAN_POINT('',(0.85,1.15,0.));+#166 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#167 = DIRECTION('',(-1.,-2.22044604925E-16,0.));+#168 = ADVANCED_FACE('',(#169),#180,.F.);+#169 = FACE_BOUND('',#170,.F.);+#170 = EDGE_LOOP('',(#171,#172,#173,#179));+#171 = ORIENTED_EDGE('',*,*,#55,.F.);+#172 = ORIENTED_EDGE('',*,*,#158,.T.);+#173 = ORIENTED_EDGE('',*,*,#174,.F.);+#174 = EDGE_CURVE('',#71,#151,#175,.T.);+#175 = LINE('',#176,#177);+#176 = CARTESIAN_POINT('',(-0.775,1.025,2.E-02));+#177 = VECTOR('',#178,1.);+#178 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#179 = ORIENTED_EDGE('',*,*,#70,.F.);+#180 = PLANE('',#181);+#181 = AXIS2_PLACEMENT_3D('',#182,#183,#184);+#182 = CARTESIAN_POINT('',(-0.65,1.15,0.));+#183 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#184 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#185 = ADVANCED_FACE('',(#186,#668),#675,.F.);+#186 = FACE_BOUND('',#187,.F.);+#187 = EDGE_LOOP('',(#188,#198,#206,#214,#222,#230,#238,#246,#254,#262,+#270,#278,#286,#294,#302,#310,#318,#326,#334,#342,#350,#358,#366,+#374,#382,#390,#398,#406,#414,#422,#430,#438,#446,#454,#462,#470,+#478,#486,#494,#502,#510,#518,#526,#534,#542,#550,#558,#566,#574,+#582,#590,#598,#606,#614,#622,#630,#638,#646,#654,#662));+#188 = ORIENTED_EDGE('',*,*,#189,.F.);+#189 = EDGE_CURVE('',#190,#192,#194,.T.);+#190 = VERTEX_POINT('',#191);+#191 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#192 = VERTEX_POINT('',#193);+#193 = CARTESIAN_POINT('',(1.49,1.3,2.E-02));+#194 = LINE('',#195,#196);+#195 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#196 = VECTOR('',#197,1.);+#197 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#198 = ORIENTED_EDGE('',*,*,#199,.F.);+#199 = EDGE_CURVE('',#200,#190,#202,.T.);+#200 = VERTEX_POINT('',#201);+#201 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#202 = LINE('',#203,#204);+#203 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#204 = VECTOR('',#205,1.);+#205 = DIRECTION('',(1.,2.22044604925E-16,0.));+#206 = ORIENTED_EDGE('',*,*,#207,.T.);+#207 = EDGE_CURVE('',#200,#208,#210,.T.);+#208 = VERTEX_POINT('',#209);+#209 = CARTESIAN_POINT('',(-1.49,1.3,2.E-02));+#210 = LINE('',#211,#212);+#211 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#212 = VECTOR('',#213,1.);+#213 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#214 = ORIENTED_EDGE('',*,*,#215,.T.);+#215 = EDGE_CURVE('',#208,#216,#218,.T.);+#216 = VERTEX_POINT('',#217);+#217 = CARTESIAN_POINT('',(-1.2,1.3,2.E-02));+#218 = LINE('',#219,#220);+#219 = CARTESIAN_POINT('',(-1.345,1.3,2.E-02));+#220 = VECTOR('',#221,1.);+#221 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#222 = ORIENTED_EDGE('',*,*,#223,.T.);+#223 = EDGE_CURVE('',#216,#224,#226,.T.);+#224 = VERTEX_POINT('',#225);+#225 = CARTESIAN_POINT('',(-1.2,1.1,2.E-02));+#226 = LINE('',#227,#228);+#227 = CARTESIAN_POINT('',(-1.2,1.295,2.E-02));+#228 = VECTOR('',#229,1.);+#229 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#230 = ORIENTED_EDGE('',*,*,#231,.T.);+#231 = EDGE_CURVE('',#224,#232,#234,.T.);+#232 = VERTEX_POINT('',#233);+#233 = CARTESIAN_POINT('',(-1.49,1.1,2.E-02));+#234 = LINE('',#235,#236);+#235 = CARTESIAN_POINT('',(-1.495,1.1,2.E-02));+#236 = VECTOR('',#237,1.);+#237 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#238 = ORIENTED_EDGE('',*,*,#239,.T.);+#239 = EDGE_CURVE('',#232,#240,#242,.T.);+#240 = VERTEX_POINT('',#241);+#241 = CARTESIAN_POINT('',(-1.49,0.9,2.E-02));+#242 = LINE('',#243,#244);+#243 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#244 = VECTOR('',#245,1.);+#245 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#246 = ORIENTED_EDGE('',*,*,#247,.T.);+#247 = EDGE_CURVE('',#240,#248,#250,.T.);+#248 = VERTEX_POINT('',#249);+#249 = CARTESIAN_POINT('',(-1.2,0.9,2.E-02));+#250 = LINE('',#251,#252);+#251 = CARTESIAN_POINT('',(-1.345,0.9,2.E-02));+#252 = VECTOR('',#253,1.);+#253 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#254 = ORIENTED_EDGE('',*,*,#255,.T.);+#255 = EDGE_CURVE('',#248,#256,#258,.T.);+#256 = VERTEX_POINT('',#257);+#257 = CARTESIAN_POINT('',(-1.2,0.7,2.E-02));+#258 = LINE('',#259,#260);+#259 = CARTESIAN_POINT('',(-1.2,1.095,2.E-02));+#260 = VECTOR('',#261,1.);+#261 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#262 = ORIENTED_EDGE('',*,*,#263,.T.);+#263 = EDGE_CURVE('',#256,#264,#266,.T.);+#264 = VERTEX_POINT('',#265);+#265 = CARTESIAN_POINT('',(-1.49,0.7,2.E-02));+#266 = LINE('',#267,#268);+#267 = CARTESIAN_POINT('',(-1.495,0.7,2.E-02));+#268 = VECTOR('',#269,1.);+#269 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#270 = ORIENTED_EDGE('',*,*,#271,.T.);+#271 = EDGE_CURVE('',#264,#272,#274,.T.);+#272 = VERTEX_POINT('',#273);+#273 = CARTESIAN_POINT('',(-1.49,0.5,2.E-02));+#274 = LINE('',#275,#276);+#275 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#276 = VECTOR('',#277,1.);+#277 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#278 = ORIENTED_EDGE('',*,*,#279,.T.);+#279 = EDGE_CURVE('',#272,#280,#282,.T.);+#280 = VERTEX_POINT('',#281);+#281 = CARTESIAN_POINT('',(-1.2,0.5,2.E-02));+#282 = LINE('',#283,#284);+#283 = CARTESIAN_POINT('',(-1.345,0.5,2.E-02));+#284 = VECTOR('',#285,1.);+#285 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#286 = ORIENTED_EDGE('',*,*,#287,.T.);+#287 = EDGE_CURVE('',#280,#288,#290,.T.);+#288 = VERTEX_POINT('',#289);+#289 = CARTESIAN_POINT('',(-1.2,0.3,2.E-02));+#290 = LINE('',#291,#292);+#291 = CARTESIAN_POINT('',(-1.2,0.895,2.E-02));+#292 = VECTOR('',#293,1.);+#293 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#294 = ORIENTED_EDGE('',*,*,#295,.T.);+#295 = EDGE_CURVE('',#288,#296,#298,.T.);+#296 = VERTEX_POINT('',#297);+#297 = CARTESIAN_POINT('',(-1.49,0.3,2.E-02));+#298 = LINE('',#299,#300);+#299 = CARTESIAN_POINT('',(-1.495,0.3,2.E-02));+#300 = VECTOR('',#301,1.);+#301 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#302 = ORIENTED_EDGE('',*,*,#303,.T.);+#303 = EDGE_CURVE('',#296,#304,#306,.T.);+#304 = VERTEX_POINT('',#305);+#305 = CARTESIAN_POINT('',(-1.49,1.E-01,2.E-02));+#306 = LINE('',#307,#308);+#307 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#308 = VECTOR('',#309,1.);+#309 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#310 = ORIENTED_EDGE('',*,*,#311,.T.);+#311 = EDGE_CURVE('',#304,#312,#314,.T.);+#312 = VERTEX_POINT('',#313);+#313 = CARTESIAN_POINT('',(-1.2,1.E-01,2.E-02));+#314 = LINE('',#315,#316);+#315 = CARTESIAN_POINT('',(-1.345,1.E-01,2.E-02));+#316 = VECTOR('',#317,1.);+#317 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#318 = ORIENTED_EDGE('',*,*,#319,.T.);+#319 = EDGE_CURVE('',#312,#320,#322,.T.);+#320 = VERTEX_POINT('',#321);+#321 = CARTESIAN_POINT('',(-1.2,-0.1,2.E-02));+#322 = LINE('',#323,#324);+#323 = CARTESIAN_POINT('',(-1.2,0.695,2.E-02));+#324 = VECTOR('',#325,1.);+#325 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#326 = ORIENTED_EDGE('',*,*,#327,.T.);+#327 = EDGE_CURVE('',#320,#328,#330,.T.);+#328 = VERTEX_POINT('',#329);+#329 = CARTESIAN_POINT('',(-1.49,-0.1,2.E-02));+#330 = LINE('',#331,#332);+#331 = CARTESIAN_POINT('',(-1.495,-0.1,2.E-02));+#332 = VECTOR('',#333,1.);+#333 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#334 = ORIENTED_EDGE('',*,*,#335,.T.);+#335 = EDGE_CURVE('',#328,#336,#338,.T.);+#336 = VERTEX_POINT('',#337);+#337 = CARTESIAN_POINT('',(-1.49,-0.3,2.E-02));+#338 = LINE('',#339,#340);+#339 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#340 = VECTOR('',#341,1.);+#341 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#342 = ORIENTED_EDGE('',*,*,#343,.T.);+#343 = EDGE_CURVE('',#336,#344,#346,.T.);+#344 = VERTEX_POINT('',#345);+#345 = CARTESIAN_POINT('',(-1.2,-0.3,2.E-02));+#346 = LINE('',#347,#348);+#347 = CARTESIAN_POINT('',(-1.345,-0.3,2.E-02));+#348 = VECTOR('',#349,1.);+#349 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#350 = ORIENTED_EDGE('',*,*,#351,.T.);+#351 = EDGE_CURVE('',#344,#352,#354,.T.);+#352 = VERTEX_POINT('',#353);+#353 = CARTESIAN_POINT('',(-1.2,-0.5,2.E-02));+#354 = LINE('',#355,#356);+#355 = CARTESIAN_POINT('',(-1.2,0.495,2.E-02));+#356 = VECTOR('',#357,1.);+#357 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#358 = ORIENTED_EDGE('',*,*,#359,.T.);+#359 = EDGE_CURVE('',#352,#360,#362,.T.);+#360 = VERTEX_POINT('',#361);+#361 = CARTESIAN_POINT('',(-1.49,-0.5,2.E-02));+#362 = LINE('',#363,#364);+#363 = CARTESIAN_POINT('',(-1.495,-0.5,2.E-02));+#364 = VECTOR('',#365,1.);+#365 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#366 = ORIENTED_EDGE('',*,*,#367,.T.);+#367 = EDGE_CURVE('',#360,#368,#370,.T.);+#368 = VERTEX_POINT('',#369);+#369 = CARTESIAN_POINT('',(-1.49,-0.7,2.E-02));+#370 = LINE('',#371,#372);+#371 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#372 = VECTOR('',#373,1.);+#373 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#374 = ORIENTED_EDGE('',*,*,#375,.T.);+#375 = EDGE_CURVE('',#368,#376,#378,.T.);+#376 = VERTEX_POINT('',#377);+#377 = CARTESIAN_POINT('',(-1.2,-0.7,2.E-02));+#378 = LINE('',#379,#380);+#379 = CARTESIAN_POINT('',(-1.345,-0.7,2.E-02));+#380 = VECTOR('',#381,1.);+#381 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#382 = ORIENTED_EDGE('',*,*,#383,.T.);+#383 = EDGE_CURVE('',#376,#384,#386,.T.);+#384 = VERTEX_POINT('',#385);+#385 = CARTESIAN_POINT('',(-1.2,-0.9,2.E-02));+#386 = LINE('',#387,#388);+#387 = CARTESIAN_POINT('',(-1.2,0.295,2.E-02));+#388 = VECTOR('',#389,1.);+#389 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#390 = ORIENTED_EDGE('',*,*,#391,.T.);+#391 = EDGE_CURVE('',#384,#392,#394,.T.);+#392 = VERTEX_POINT('',#393);+#393 = CARTESIAN_POINT('',(-1.49,-0.9,2.E-02));+#394 = LINE('',#395,#396);+#395 = CARTESIAN_POINT('',(-1.495,-0.9,2.E-02));+#396 = VECTOR('',#397,1.);+#397 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#398 = ORIENTED_EDGE('',*,*,#399,.T.);+#399 = EDGE_CURVE('',#392,#400,#402,.T.);+#400 = VERTEX_POINT('',#401);+#401 = CARTESIAN_POINT('',(-1.49,-1.1,2.E-02));+#402 = LINE('',#403,#404);+#403 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#404 = VECTOR('',#405,1.);+#405 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#406 = ORIENTED_EDGE('',*,*,#407,.T.);+#407 = EDGE_CURVE('',#400,#408,#410,.T.);+#408 = VERTEX_POINT('',#409);+#409 = CARTESIAN_POINT('',(-1.2,-1.1,2.E-02));+#410 = LINE('',#411,#412);+#411 = CARTESIAN_POINT('',(-1.345,-1.1,2.E-02));+#412 = VECTOR('',#413,1.);+#413 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#414 = ORIENTED_EDGE('',*,*,#415,.T.);+#415 = EDGE_CURVE('',#408,#416,#418,.T.);+#416 = VERTEX_POINT('',#417);+#417 = CARTESIAN_POINT('',(-1.2,-1.3,2.E-02));+#418 = LINE('',#419,#420);+#419 = CARTESIAN_POINT('',(-1.2,9.5E-02,2.E-02));+#420 = VECTOR('',#421,1.);+#421 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#422 = ORIENTED_EDGE('',*,*,#423,.T.);+#423 = EDGE_CURVE('',#416,#424,#426,.T.);+#424 = VERTEX_POINT('',#425);+#425 = CARTESIAN_POINT('',(-1.49,-1.3,2.E-02));+#426 = LINE('',#427,#428);+#427 = CARTESIAN_POINT('',(-1.495,-1.3,2.E-02));+#428 = VECTOR('',#429,1.);+#429 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#430 = ORIENTED_EDGE('',*,*,#431,.T.);+#431 = EDGE_CURVE('',#424,#432,#434,.T.);+#432 = VERTEX_POINT('',#433);+#433 = CARTESIAN_POINT('',(-1.49,-1.49,2.E-02));+#434 = LINE('',#435,#436);+#435 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#436 = VECTOR('',#437,1.);+#437 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#438 = ORIENTED_EDGE('',*,*,#439,.T.);+#439 = EDGE_CURVE('',#432,#440,#442,.T.);+#440 = VERTEX_POINT('',#441);+#441 = CARTESIAN_POINT('',(1.49,-1.49,2.E-02));+#442 = LINE('',#443,#444);+#443 = CARTESIAN_POINT('',(-1.49,-1.49,2.E-02));+#444 = VECTOR('',#445,1.);+#445 = DIRECTION('',(1.,2.22044604925E-16,0.));+#446 = ORIENTED_EDGE('',*,*,#447,.F.);+#447 = EDGE_CURVE('',#448,#440,#450,.T.);+#448 = VERTEX_POINT('',#449);+#449 = CARTESIAN_POINT('',(1.49,-1.3,2.E-02));+#450 = LINE('',#451,#452);+#451 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#452 = VECTOR('',#453,1.);+#453 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#454 = ORIENTED_EDGE('',*,*,#455,.T.);+#455 = EDGE_CURVE('',#448,#456,#458,.T.);+#456 = VERTEX_POINT('',#457);+#457 = CARTESIAN_POINT('',(1.2,-1.3,2.E-02));+#458 = LINE('',#459,#460);+#459 = CARTESIAN_POINT('',(-0.145,-1.3,2.E-02));+#460 = VECTOR('',#461,1.);+#461 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#462 = ORIENTED_EDGE('',*,*,#463,.T.);+#463 = EDGE_CURVE('',#456,#464,#466,.T.);+#464 = VERTEX_POINT('',#465);+#465 = CARTESIAN_POINT('',(1.2,-1.1,2.E-02));+#466 = LINE('',#467,#468);+#467 = CARTESIAN_POINT('',(1.2,0.195,2.E-02));+#468 = VECTOR('',#469,1.);+#469 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#470 = ORIENTED_EDGE('',*,*,#471,.T.);+#471 = EDGE_CURVE('',#464,#472,#474,.T.);+#472 = VERTEX_POINT('',#473);+#473 = CARTESIAN_POINT('',(1.49,-1.1,2.E-02));+#474 = LINE('',#475,#476);+#475 = CARTESIAN_POINT('',(5.E-03,-1.1,2.E-02));+#476 = VECTOR('',#477,1.);+#477 = DIRECTION('',(1.,9.95799250103E-17,0.));+#478 = ORIENTED_EDGE('',*,*,#479,.F.);+#479 = EDGE_CURVE('',#480,#472,#482,.T.);+#480 = VERTEX_POINT('',#481);+#481 = CARTESIAN_POINT('',(1.49,-0.9,2.E-02));+#482 = LINE('',#483,#484);+#483 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#484 = VECTOR('',#485,1.);+#485 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#486 = ORIENTED_EDGE('',*,*,#487,.T.);+#487 = EDGE_CURVE('',#480,#488,#490,.T.);+#488 = VERTEX_POINT('',#489);+#489 = CARTESIAN_POINT('',(1.2,-0.9,2.E-02));+#490 = LINE('',#491,#492);+#491 = CARTESIAN_POINT('',(-0.145,-0.9,2.E-02));+#492 = VECTOR('',#493,1.);+#493 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#494 = ORIENTED_EDGE('',*,*,#495,.T.);+#495 = EDGE_CURVE('',#488,#496,#498,.T.);+#496 = VERTEX_POINT('',#497);+#497 = CARTESIAN_POINT('',(1.2,-0.7,2.E-02));+#498 = LINE('',#499,#500);+#499 = CARTESIAN_POINT('',(1.2,0.395,2.E-02));+#500 = VECTOR('',#501,1.);+#501 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#502 = ORIENTED_EDGE('',*,*,#503,.T.);+#503 = EDGE_CURVE('',#496,#504,#506,.T.);+#504 = VERTEX_POINT('',#505);+#505 = CARTESIAN_POINT('',(1.49,-0.7,2.E-02));+#506 = LINE('',#507,#508);+#507 = CARTESIAN_POINT('',(5.E-03,-0.7,2.E-02));+#508 = VECTOR('',#509,1.);+#509 = DIRECTION('',(1.,9.95799250103E-17,0.));+#510 = ORIENTED_EDGE('',*,*,#511,.F.);+#511 = EDGE_CURVE('',#512,#504,#514,.T.);+#512 = VERTEX_POINT('',#513);+#513 = CARTESIAN_POINT('',(1.49,-0.5,2.E-02));+#514 = LINE('',#515,#516);+#515 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#516 = VECTOR('',#517,1.);+#517 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#518 = ORIENTED_EDGE('',*,*,#519,.T.);+#519 = EDGE_CURVE('',#512,#520,#522,.T.);+#520 = VERTEX_POINT('',#521);+#521 = CARTESIAN_POINT('',(1.2,-0.5,2.E-02));+#522 = LINE('',#523,#524);+#523 = CARTESIAN_POINT('',(-0.145,-0.5,2.E-02));+#524 = VECTOR('',#525,1.);+#525 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#526 = ORIENTED_EDGE('',*,*,#527,.T.);+#527 = EDGE_CURVE('',#520,#528,#530,.T.);+#528 = VERTEX_POINT('',#529);+#529 = CARTESIAN_POINT('',(1.2,-0.3,2.E-02));+#530 = LINE('',#531,#532);+#531 = CARTESIAN_POINT('',(1.2,0.595,2.E-02));+#532 = VECTOR('',#533,1.);+#533 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#534 = ORIENTED_EDGE('',*,*,#535,.T.);+#535 = EDGE_CURVE('',#528,#536,#538,.T.);+#536 = VERTEX_POINT('',#537);+#537 = CARTESIAN_POINT('',(1.49,-0.3,2.E-02));+#538 = LINE('',#539,#540);+#539 = CARTESIAN_POINT('',(5.E-03,-0.3,2.E-02));+#540 = VECTOR('',#541,1.);+#541 = DIRECTION('',(1.,9.95799250103E-17,0.));+#542 = ORIENTED_EDGE('',*,*,#543,.F.);+#543 = EDGE_CURVE('',#544,#536,#546,.T.);+#544 = VERTEX_POINT('',#545);+#545 = CARTESIAN_POINT('',(1.49,-1.E-01,2.E-02));+#546 = LINE('',#547,#548);+#547 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#548 = VECTOR('',#549,1.);+#549 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#550 = ORIENTED_EDGE('',*,*,#551,.T.);+#551 = EDGE_CURVE('',#544,#552,#554,.T.);+#552 = VERTEX_POINT('',#553);+#553 = CARTESIAN_POINT('',(1.2,-1.E-01,2.E-02));+#554 = LINE('',#555,#556);+#555 = CARTESIAN_POINT('',(-0.145,-1.E-01,2.E-02));+#556 = VECTOR('',#557,1.);+#557 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#558 = ORIENTED_EDGE('',*,*,#559,.T.);+#559 = EDGE_CURVE('',#552,#560,#562,.T.);+#560 = VERTEX_POINT('',#561);+#561 = CARTESIAN_POINT('',(1.2,0.1,2.E-02));+#562 = LINE('',#563,#564);+#563 = CARTESIAN_POINT('',(1.2,0.795,2.E-02));+#564 = VECTOR('',#565,1.);+#565 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#566 = ORIENTED_EDGE('',*,*,#567,.T.);+#567 = EDGE_CURVE('',#560,#568,#570,.T.);+#568 = VERTEX_POINT('',#569);+#569 = CARTESIAN_POINT('',(1.49,0.1,2.E-02));+#570 = LINE('',#571,#572);+#571 = CARTESIAN_POINT('',(5.E-03,0.1,2.E-02));+#572 = VECTOR('',#573,1.);+#573 = DIRECTION('',(1.,9.95799250103E-17,0.));+#574 = ORIENTED_EDGE('',*,*,#575,.F.);+#575 = EDGE_CURVE('',#576,#568,#578,.T.);+#576 = VERTEX_POINT('',#577);+#577 = CARTESIAN_POINT('',(1.49,0.3,2.E-02));+#578 = LINE('',#579,#580);+#579 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#580 = VECTOR('',#581,1.);+#581 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#582 = ORIENTED_EDGE('',*,*,#583,.T.);+#583 = EDGE_CURVE('',#576,#584,#586,.T.);+#584 = VERTEX_POINT('',#585);+#585 = CARTESIAN_POINT('',(1.2,0.3,2.E-02));+#586 = LINE('',#587,#588);+#587 = CARTESIAN_POINT('',(-0.145,0.3,2.E-02));+#588 = VECTOR('',#589,1.);+#589 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#590 = ORIENTED_EDGE('',*,*,#591,.T.);+#591 = EDGE_CURVE('',#584,#592,#594,.T.);+#592 = VERTEX_POINT('',#593);+#593 = CARTESIAN_POINT('',(1.2,0.5,2.E-02));+#594 = LINE('',#595,#596);+#595 = CARTESIAN_POINT('',(1.2,0.995,2.E-02));+#596 = VECTOR('',#597,1.);+#597 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#598 = ORIENTED_EDGE('',*,*,#599,.T.);+#599 = EDGE_CURVE('',#592,#600,#602,.T.);+#600 = VERTEX_POINT('',#601);+#601 = CARTESIAN_POINT('',(1.49,0.5,2.E-02));+#602 = LINE('',#603,#604);+#603 = CARTESIAN_POINT('',(5.E-03,0.5,2.E-02));+#604 = VECTOR('',#605,1.);+#605 = DIRECTION('',(1.,9.95799250103E-17,0.));+#606 = ORIENTED_EDGE('',*,*,#607,.F.);+#607 = EDGE_CURVE('',#608,#600,#610,.T.);+#608 = VERTEX_POINT('',#609);+#609 = CARTESIAN_POINT('',(1.49,0.7,2.E-02));+#610 = LINE('',#611,#612);+#611 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#612 = VECTOR('',#613,1.);+#613 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#614 = ORIENTED_EDGE('',*,*,#615,.T.);+#615 = EDGE_CURVE('',#608,#616,#618,.T.);+#616 = VERTEX_POINT('',#617);+#617 = CARTESIAN_POINT('',(1.2,0.7,2.E-02));+#618 = LINE('',#619,#620);+#619 = CARTESIAN_POINT('',(-0.145,0.7,2.E-02));+#620 = VECTOR('',#621,1.);+#621 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#622 = ORIENTED_EDGE('',*,*,#623,.T.);+#623 = EDGE_CURVE('',#616,#624,#626,.T.);+#624 = VERTEX_POINT('',#625);+#625 = CARTESIAN_POINT('',(1.2,0.9,2.E-02));+#626 = LINE('',#627,#628);+#627 = CARTESIAN_POINT('',(1.2,1.195,2.E-02));+#628 = VECTOR('',#629,1.);+#629 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#630 = ORIENTED_EDGE('',*,*,#631,.T.);+#631 = EDGE_CURVE('',#624,#632,#634,.T.);+#632 = VERTEX_POINT('',#633);+#633 = CARTESIAN_POINT('',(1.49,0.9,2.E-02));+#634 = LINE('',#635,#636);+#635 = CARTESIAN_POINT('',(5.E-03,0.9,2.E-02));+#636 = VECTOR('',#637,1.);+#637 = DIRECTION('',(1.,9.95799250103E-17,0.));+#638 = ORIENTED_EDGE('',*,*,#639,.F.);+#639 = EDGE_CURVE('',#640,#632,#642,.T.);+#640 = VERTEX_POINT('',#641);+#641 = CARTESIAN_POINT('',(1.49,1.1,2.E-02));+#642 = LINE('',#643,#644);+#643 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#644 = VECTOR('',#645,1.);+#645 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#646 = ORIENTED_EDGE('',*,*,#647,.T.);+#647 = EDGE_CURVE('',#640,#648,#650,.T.);+#648 = VERTEX_POINT('',#649);+#649 = CARTESIAN_POINT('',(1.2,1.1,2.E-02));+#650 = LINE('',#651,#652);+#651 = CARTESIAN_POINT('',(-0.145,1.1,2.E-02));+#652 = VECTOR('',#653,1.);+#653 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#654 = ORIENTED_EDGE('',*,*,#655,.T.);+#655 = EDGE_CURVE('',#648,#656,#658,.T.);+#656 = VERTEX_POINT('',#657);+#657 = CARTESIAN_POINT('',(1.2,1.3,2.E-02));+#658 = LINE('',#659,#660);+#659 = CARTESIAN_POINT('',(1.2,1.395,2.E-02));+#660 = VECTOR('',#661,1.);+#661 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#662 = ORIENTED_EDGE('',*,*,#663,.T.);+#663 = EDGE_CURVE('',#656,#192,#664,.T.);+#664 = LINE('',#665,#666);+#665 = CARTESIAN_POINT('',(5.E-03,1.3,2.E-02));+#666 = VECTOR('',#667,1.);+#667 = DIRECTION('',(1.,9.95799250103E-17,0.));+#668 = FACE_BOUND('',#669,.F.);+#669 = EDGE_LOOP('',(#670,#671,#672,#673,#674));+#670 = ORIENTED_EDGE('',*,*,#126,.T.);+#671 = ORIENTED_EDGE('',*,*,#102,.T.);+#672 = ORIENTED_EDGE('',*,*,#78,.T.);+#673 = ORIENTED_EDGE('',*,*,#174,.T.);+#674 = ORIENTED_EDGE('',*,*,#150,.T.);+#675 = PLANE('',#676);+#676 = AXIS2_PLACEMENT_3D('',#677,#678,#679);+#677 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#678 = DIRECTION('',(0.,0.,1.));+#679 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#680 = ADVANCED_FACE('',(#681),#867,.T.);+#681 = FACE_BOUND('',#682,.T.);+#682 = EDGE_LOOP('',(#683,#684,#692,#700,#706,#707,#715,#723,#729,#730,+#738,#746,#752,#753,#761,#769,#775,#776,#784,#792,#798,#799,#807,+#815,#821,#822,#830,#838,#844,#845,#853,#861));+#683 = ORIENTED_EDGE('',*,*,#189,.F.);+#684 = ORIENTED_EDGE('',*,*,#685,.T.);+#685 = EDGE_CURVE('',#190,#686,#688,.T.);+#686 = VERTEX_POINT('',#687);+#687 = CARTESIAN_POINT('',(1.49,1.49,0.77));+#688 = LINE('',#689,#690);+#689 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#690 = VECTOR('',#691,1.);+#691 = DIRECTION('',(0.,0.,1.));+#692 = ORIENTED_EDGE('',*,*,#693,.T.);+#693 = EDGE_CURVE('',#686,#694,#696,.T.);+#694 = VERTEX_POINT('',#695);+#695 = CARTESIAN_POINT('',(1.49,-1.49,0.77));+#696 = LINE('',#697,#698);+#697 = CARTESIAN_POINT('',(1.49,1.49,0.77));+#698 = VECTOR('',#699,1.);+#699 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#700 = ORIENTED_EDGE('',*,*,#701,.F.);+#701 = EDGE_CURVE('',#440,#694,#702,.T.);+#702 = LINE('',#703,#704);+#703 = CARTESIAN_POINT('',(1.49,-1.49,2.E-02));+#704 = VECTOR('',#705,1.);+#705 = DIRECTION('',(0.,0.,1.));+#706 = ORIENTED_EDGE('',*,*,#447,.F.);+#707 = ORIENTED_EDGE('',*,*,#708,.T.);+#708 = EDGE_CURVE('',#448,#709,#711,.T.);+#709 = VERTEX_POINT('',#710);+#710 = CARTESIAN_POINT('',(1.49,-1.3,0.2));+#711 = LINE('',#712,#713);+#712 = CARTESIAN_POINT('',(1.49,-1.3,1.E-02));+#713 = VECTOR('',#714,1.);+#714 = DIRECTION('',(0.,0.,1.));+#715 = ORIENTED_EDGE('',*,*,#716,.F.);+#716 = EDGE_CURVE('',#717,#709,#719,.T.);+#717 = VERTEX_POINT('',#718);+#718 = CARTESIAN_POINT('',(1.49,-1.1,0.2));+#719 = LINE('',#720,#721);+#720 = CARTESIAN_POINT('',(1.49,0.145,0.2));+#721 = VECTOR('',#722,1.);+#722 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#723 = ORIENTED_EDGE('',*,*,#724,.T.);+#724 = EDGE_CURVE('',#717,#472,#725,.T.);+#725 = LINE('',#726,#727);+#726 = CARTESIAN_POINT('',(1.49,-1.1,1.E-02));+#727 = VECTOR('',#728,1.);+#728 = DIRECTION('',(0.,0.,-1.));+#729 = ORIENTED_EDGE('',*,*,#479,.F.);+#730 = ORIENTED_EDGE('',*,*,#731,.T.);+#731 = EDGE_CURVE('',#480,#732,#734,.T.);+#732 = VERTEX_POINT('',#733);+#733 = CARTESIAN_POINT('',(1.49,-0.9,0.2));+#734 = LINE('',#735,#736);+#735 = CARTESIAN_POINT('',(1.49,-0.9,1.E-02));+#736 = VECTOR('',#737,1.);+#737 = DIRECTION('',(0.,0.,1.));+#738 = ORIENTED_EDGE('',*,*,#739,.F.);+#739 = EDGE_CURVE('',#740,#732,#742,.T.);+#740 = VERTEX_POINT('',#741);+#741 = CARTESIAN_POINT('',(1.49,-0.7,0.2));+#742 = LINE('',#743,#744);+#743 = CARTESIAN_POINT('',(1.49,0.345,0.2));+#744 = VECTOR('',#745,1.);+#745 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#746 = ORIENTED_EDGE('',*,*,#747,.T.);+#747 = EDGE_CURVE('',#740,#504,#748,.T.);+#748 = LINE('',#749,#750);+#749 = CARTESIAN_POINT('',(1.49,-0.7,1.E-02));+#750 = VECTOR('',#751,1.);+#751 = DIRECTION('',(0.,0.,-1.));+#752 = ORIENTED_EDGE('',*,*,#511,.F.);+#753 = ORIENTED_EDGE('',*,*,#754,.T.);+#754 = EDGE_CURVE('',#512,#755,#757,.T.);+#755 = VERTEX_POINT('',#756);+#756 = CARTESIAN_POINT('',(1.49,-0.5,0.2));+#757 = LINE('',#758,#759);+#758 = CARTESIAN_POINT('',(1.49,-0.5,1.E-02));+#759 = VECTOR('',#760,1.);+#760 = DIRECTION('',(0.,0.,1.));+#761 = ORIENTED_EDGE('',*,*,#762,.F.);+#762 = EDGE_CURVE('',#763,#755,#765,.T.);+#763 = VERTEX_POINT('',#764);+#764 = CARTESIAN_POINT('',(1.49,-0.3,0.2));+#765 = LINE('',#766,#767);+#766 = CARTESIAN_POINT('',(1.49,0.545,0.2));+#767 = VECTOR('',#768,1.);+#768 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#769 = ORIENTED_EDGE('',*,*,#770,.T.);+#770 = EDGE_CURVE('',#763,#536,#771,.T.);+#771 = LINE('',#772,#773);+#772 = CARTESIAN_POINT('',(1.49,-0.3,1.E-02));+#773 = VECTOR('',#774,1.);+#774 = DIRECTION('',(0.,0.,-1.));+#775 = ORIENTED_EDGE('',*,*,#543,.F.);+#776 = ORIENTED_EDGE('',*,*,#777,.T.);+#777 = EDGE_CURVE('',#544,#778,#780,.T.);+#778 = VERTEX_POINT('',#779);+#779 = CARTESIAN_POINT('',(1.49,-1.E-01,0.2));+#780 = LINE('',#781,#782);+#781 = CARTESIAN_POINT('',(1.49,-1.E-01,1.E-02));+#782 = VECTOR('',#783,1.);+#783 = DIRECTION('',(0.,0.,1.));+#784 = ORIENTED_EDGE('',*,*,#785,.F.);+#785 = EDGE_CURVE('',#786,#778,#788,.T.);+#786 = VERTEX_POINT('',#787);+#787 = CARTESIAN_POINT('',(1.49,0.1,0.2));+#788 = LINE('',#789,#790);+#789 = CARTESIAN_POINT('',(1.49,0.745,0.2));+#790 = VECTOR('',#791,1.);+#791 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#792 = ORIENTED_EDGE('',*,*,#793,.T.);+#793 = EDGE_CURVE('',#786,#568,#794,.T.);+#794 = LINE('',#795,#796);+#795 = CARTESIAN_POINT('',(1.49,0.1,1.E-02));+#796 = VECTOR('',#797,1.);+#797 = DIRECTION('',(0.,0.,-1.));+#798 = ORIENTED_EDGE('',*,*,#575,.F.);+#799 = ORIENTED_EDGE('',*,*,#800,.T.);+#800 = EDGE_CURVE('',#576,#801,#803,.T.);+#801 = VERTEX_POINT('',#802);+#802 = CARTESIAN_POINT('',(1.49,0.3,0.2));+#803 = LINE('',#804,#805);+#804 = CARTESIAN_POINT('',(1.49,0.3,1.E-02));+#805 = VECTOR('',#806,1.);+#806 = DIRECTION('',(0.,0.,1.));+#807 = ORIENTED_EDGE('',*,*,#808,.F.);+#808 = EDGE_CURVE('',#809,#801,#811,.T.);+#809 = VERTEX_POINT('',#810);+#810 = CARTESIAN_POINT('',(1.49,0.5,0.2));+#811 = LINE('',#812,#813);+#812 = CARTESIAN_POINT('',(1.49,0.945,0.2));+#813 = VECTOR('',#814,1.);+#814 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#815 = ORIENTED_EDGE('',*,*,#816,.T.);+#816 = EDGE_CURVE('',#809,#600,#817,.T.);+#817 = LINE('',#818,#819);+#818 = CARTESIAN_POINT('',(1.49,0.5,1.E-02));+#819 = VECTOR('',#820,1.);+#820 = DIRECTION('',(0.,0.,-1.));+#821 = ORIENTED_EDGE('',*,*,#607,.F.);+#822 = ORIENTED_EDGE('',*,*,#823,.T.);+#823 = EDGE_CURVE('',#608,#824,#826,.T.);+#824 = VERTEX_POINT('',#825);+#825 = CARTESIAN_POINT('',(1.49,0.7,0.2));+#826 = LINE('',#827,#828);+#827 = CARTESIAN_POINT('',(1.49,0.7,1.E-02));+#828 = VECTOR('',#829,1.);+#829 = DIRECTION('',(0.,0.,1.));+#830 = ORIENTED_EDGE('',*,*,#831,.F.);+#831 = EDGE_CURVE('',#832,#824,#834,.T.);+#832 = VERTEX_POINT('',#833);+#833 = CARTESIAN_POINT('',(1.49,0.9,0.2));+#834 = LINE('',#835,#836);+#835 = CARTESIAN_POINT('',(1.49,1.145,0.2));+#836 = VECTOR('',#837,1.);+#837 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#838 = ORIENTED_EDGE('',*,*,#839,.T.);+#839 = EDGE_CURVE('',#832,#632,#840,.T.);+#840 = LINE('',#841,#842);+#841 = CARTESIAN_POINT('',(1.49,0.9,1.E-02));+#842 = VECTOR('',#843,1.);+#843 = DIRECTION('',(0.,0.,-1.));+#844 = ORIENTED_EDGE('',*,*,#639,.F.);+#845 = ORIENTED_EDGE('',*,*,#846,.T.);+#846 = EDGE_CURVE('',#640,#847,#849,.T.);+#847 = VERTEX_POINT('',#848);+#848 = CARTESIAN_POINT('',(1.49,1.1,0.2));+#849 = LINE('',#850,#851);+#850 = CARTESIAN_POINT('',(1.49,1.1,1.E-02));+#851 = VECTOR('',#852,1.);+#852 = DIRECTION('',(0.,0.,1.));+#853 = ORIENTED_EDGE('',*,*,#854,.F.);+#854 = EDGE_CURVE('',#855,#847,#857,.T.);+#855 = VERTEX_POINT('',#856);+#856 = CARTESIAN_POINT('',(1.49,1.3,0.2));+#857 = LINE('',#858,#859);+#858 = CARTESIAN_POINT('',(1.49,1.345,0.2));+#859 = VECTOR('',#860,1.);+#860 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#861 = ORIENTED_EDGE('',*,*,#862,.T.);+#862 = EDGE_CURVE('',#855,#192,#863,.T.);+#863 = LINE('',#864,#865);+#864 = CARTESIAN_POINT('',(1.49,1.3,1.E-02));+#865 = VECTOR('',#866,1.);+#866 = DIRECTION('',(0.,0.,-1.));+#867 = PLANE('',#868);+#868 = AXIS2_PLACEMENT_3D('',#869,#870,#871);+#869 = CARTESIAN_POINT('',(1.49,1.49,2.E-02));+#870 = DIRECTION('',(1.,2.22044604925E-16,0.));+#871 = DIRECTION('',(0.,0.,1.));+#872 = ADVANCED_FACE('',(#873),#891,.F.);+#873 = FACE_BOUND('',#874,.F.);+#874 = EDGE_LOOP('',(#875,#883,#884,#885));+#875 = ORIENTED_EDGE('',*,*,#876,.F.);+#876 = EDGE_CURVE('',#200,#877,#879,.T.);+#877 = VERTEX_POINT('',#878);+#878 = CARTESIAN_POINT('',(-1.49,1.49,0.77));+#879 = LINE('',#880,#881);+#880 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#881 = VECTOR('',#882,1.);+#882 = DIRECTION('',(0.,0.,1.));+#883 = ORIENTED_EDGE('',*,*,#199,.T.);+#884 = ORIENTED_EDGE('',*,*,#685,.T.);+#885 = ORIENTED_EDGE('',*,*,#886,.F.);+#886 = EDGE_CURVE('',#877,#686,#887,.T.);+#887 = LINE('',#888,#889);+#888 = CARTESIAN_POINT('',(-1.49,1.49,0.77));+#889 = VECTOR('',#890,1.);+#890 = DIRECTION('',(1.,2.22044604925E-16,0.));+#891 = PLANE('',#892);+#892 = AXIS2_PLACEMENT_3D('',#893,#894,#895);+#893 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#894 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#895 = DIRECTION('',(0.,0.,1.));+#896 = ADVANCED_FACE('',(#897),#931,.F.);+#897 = FACE_BOUND('',#898,.F.);+#898 = EDGE_LOOP('',(#899,#909,#917,#923,#924,#925));+#899 = ORIENTED_EDGE('',*,*,#900,.F.);+#900 = EDGE_CURVE('',#901,#903,#905,.T.);+#901 = VERTEX_POINT('',#902);+#902 = CARTESIAN_POINT('',(1.5,1.3,0.));+#903 = VERTEX_POINT('',#904);+#904 = CARTESIAN_POINT('',(1.2,1.3,0.));+#905 = LINE('',#906,#907);+#906 = CARTESIAN_POINT('',(1.5,1.3,0.));+#907 = VECTOR('',#908,1.);+#908 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#909 = ORIENTED_EDGE('',*,*,#910,.T.);+#910 = EDGE_CURVE('',#901,#911,#913,.T.);+#911 = VERTEX_POINT('',#912);+#912 = CARTESIAN_POINT('',(1.5,1.3,0.2));+#913 = LINE('',#914,#915);+#914 = CARTESIAN_POINT('',(1.5,1.3,0.));+#915 = VECTOR('',#916,1.);+#916 = DIRECTION('',(0.,0.,1.));+#917 = ORIENTED_EDGE('',*,*,#918,.T.);+#918 = EDGE_CURVE('',#911,#855,#919,.T.);+#919 = LINE('',#920,#921);+#920 = CARTESIAN_POINT('',(1.5,1.3,0.2));+#921 = VECTOR('',#922,1.);+#922 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#923 = ORIENTED_EDGE('',*,*,#862,.T.);+#924 = ORIENTED_EDGE('',*,*,#663,.F.);+#925 = ORIENTED_EDGE('',*,*,#926,.F.);+#926 = EDGE_CURVE('',#903,#656,#927,.T.);+#927 = LINE('',#928,#929);+#928 = CARTESIAN_POINT('',(1.2,1.3,0.));+#929 = VECTOR('',#930,1.);+#930 = DIRECTION('',(0.,0.,1.));+#931 = PLANE('',#932);+#932 = AXIS2_PLACEMENT_3D('',#933,#934,#935);+#933 = CARTESIAN_POINT('',(1.5,1.3,0.));+#934 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#935 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#936 = ADVANCED_FACE('',(#937),#1116,.F.);+#937 = FACE_BOUND('',#938,.F.);+#938 = EDGE_LOOP('',(#939,#940,#941,#949,#955,#956,#964,#972,#978,#979,+#987,#995,#1001,#1002,#1010,#1018,#1024,#1025,#1033,#1041,#1047,+#1048,#1056,#1064,#1070,#1071,#1079,#1087,#1093,#1094,#1102,#1110));+#939 = ORIENTED_EDGE('',*,*,#207,.F.);+#940 = ORIENTED_EDGE('',*,*,#876,.T.);+#941 = ORIENTED_EDGE('',*,*,#942,.T.);+#942 = EDGE_CURVE('',#877,#943,#945,.T.);+#943 = VERTEX_POINT('',#944);+#944 = CARTESIAN_POINT('',(-1.49,-1.49,0.77));+#945 = LINE('',#946,#947);+#946 = CARTESIAN_POINT('',(-1.49,1.49,0.77));+#947 = VECTOR('',#948,1.);+#948 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#949 = ORIENTED_EDGE('',*,*,#950,.F.);+#950 = EDGE_CURVE('',#432,#943,#951,.T.);+#951 = LINE('',#952,#953);+#952 = CARTESIAN_POINT('',(-1.49,-1.49,2.E-02));+#953 = VECTOR('',#954,1.);+#954 = DIRECTION('',(0.,0.,1.));+#955 = ORIENTED_EDGE('',*,*,#431,.F.);+#956 = ORIENTED_EDGE('',*,*,#957,.T.);+#957 = EDGE_CURVE('',#424,#958,#960,.T.);+#958 = VERTEX_POINT('',#959);+#959 = CARTESIAN_POINT('',(-1.49,-1.3,0.2));+#960 = LINE('',#961,#962);+#961 = CARTESIAN_POINT('',(-1.49,-1.3,1.E-02));+#962 = VECTOR('',#963,1.);+#963 = DIRECTION('',(0.,0.,1.));+#964 = ORIENTED_EDGE('',*,*,#965,.F.);+#965 = EDGE_CURVE('',#966,#958,#968,.T.);+#966 = VERTEX_POINT('',#967);+#967 = CARTESIAN_POINT('',(-1.49,-1.1,0.2));+#968 = LINE('',#969,#970);+#969 = CARTESIAN_POINT('',(-1.49,0.145,0.2));+#970 = VECTOR('',#971,1.);+#971 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#972 = ORIENTED_EDGE('',*,*,#973,.T.);+#973 = EDGE_CURVE('',#966,#400,#974,.T.);+#974 = LINE('',#975,#976);+#975 = CARTESIAN_POINT('',(-1.49,-1.1,1.E-02));+#976 = VECTOR('',#977,1.);+#977 = DIRECTION('',(0.,0.,-1.));+#978 = ORIENTED_EDGE('',*,*,#399,.F.);+#979 = ORIENTED_EDGE('',*,*,#980,.T.);+#980 = EDGE_CURVE('',#392,#981,#983,.T.);+#981 = VERTEX_POINT('',#982);+#982 = CARTESIAN_POINT('',(-1.49,-0.9,0.2));+#983 = LINE('',#984,#985);+#984 = CARTESIAN_POINT('',(-1.49,-0.9,1.E-02));+#985 = VECTOR('',#986,1.);+#986 = DIRECTION('',(0.,0.,1.));+#987 = ORIENTED_EDGE('',*,*,#988,.F.);+#988 = EDGE_CURVE('',#989,#981,#991,.T.);+#989 = VERTEX_POINT('',#990);+#990 = CARTESIAN_POINT('',(-1.49,-0.7,0.2));+#991 = LINE('',#992,#993);+#992 = CARTESIAN_POINT('',(-1.49,0.345,0.2));+#993 = VECTOR('',#994,1.);+#994 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#995 = ORIENTED_EDGE('',*,*,#996,.T.);+#996 = EDGE_CURVE('',#989,#368,#997,.T.);+#997 = LINE('',#998,#999);+#998 = CARTESIAN_POINT('',(-1.49,-0.7,1.E-02));+#999 = VECTOR('',#1000,1.);+#1000 = DIRECTION('',(0.,0.,-1.));+#1001 = ORIENTED_EDGE('',*,*,#367,.F.);+#1002 = ORIENTED_EDGE('',*,*,#1003,.T.);+#1003 = EDGE_CURVE('',#360,#1004,#1006,.T.);+#1004 = VERTEX_POINT('',#1005);+#1005 = CARTESIAN_POINT('',(-1.49,-0.5,0.2));+#1006 = LINE('',#1007,#1008);+#1007 = CARTESIAN_POINT('',(-1.49,-0.5,1.E-02));+#1008 = VECTOR('',#1009,1.);+#1009 = DIRECTION('',(0.,0.,1.));+#1010 = ORIENTED_EDGE('',*,*,#1011,.F.);+#1011 = EDGE_CURVE('',#1012,#1004,#1014,.T.);+#1012 = VERTEX_POINT('',#1013);+#1013 = CARTESIAN_POINT('',(-1.49,-0.3,0.2));+#1014 = LINE('',#1015,#1016);+#1015 = CARTESIAN_POINT('',(-1.49,0.545,0.2));+#1016 = VECTOR('',#1017,1.);+#1017 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#1018 = ORIENTED_EDGE('',*,*,#1019,.T.);+#1019 = EDGE_CURVE('',#1012,#336,#1020,.T.);+#1020 = LINE('',#1021,#1022);+#1021 = CARTESIAN_POINT('',(-1.49,-0.3,1.E-02));+#1022 = VECTOR('',#1023,1.);+#1023 = DIRECTION('',(0.,0.,-1.));+#1024 = ORIENTED_EDGE('',*,*,#335,.F.);+#1025 = ORIENTED_EDGE('',*,*,#1026,.T.);+#1026 = EDGE_CURVE('',#328,#1027,#1029,.T.);+#1027 = VERTEX_POINT('',#1028);+#1028 = CARTESIAN_POINT('',(-1.49,-0.1,0.2));+#1029 = LINE('',#1030,#1031);+#1030 = CARTESIAN_POINT('',(-1.49,-0.1,1.E-02));+#1031 = VECTOR('',#1032,1.);+#1032 = DIRECTION('',(0.,0.,1.));+#1033 = ORIENTED_EDGE('',*,*,#1034,.F.);+#1034 = EDGE_CURVE('',#1035,#1027,#1037,.T.);+#1035 = VERTEX_POINT('',#1036);+#1036 = CARTESIAN_POINT('',(-1.49,1.E-01,0.2));+#1037 = LINE('',#1038,#1039);+#1038 = CARTESIAN_POINT('',(-1.49,0.745,0.2));+#1039 = VECTOR('',#1040,1.);+#1040 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#1041 = ORIENTED_EDGE('',*,*,#1042,.T.);+#1042 = EDGE_CURVE('',#1035,#304,#1043,.T.);+#1043 = LINE('',#1044,#1045);+#1044 = CARTESIAN_POINT('',(-1.49,1.E-01,1.E-02));+#1045 = VECTOR('',#1046,1.);+#1046 = DIRECTION('',(0.,0.,-1.));+#1047 = ORIENTED_EDGE('',*,*,#303,.F.);+#1048 = ORIENTED_EDGE('',*,*,#1049,.T.);+#1049 = EDGE_CURVE('',#296,#1050,#1052,.T.);+#1050 = VERTEX_POINT('',#1051);+#1051 = CARTESIAN_POINT('',(-1.49,0.3,0.2));+#1052 = LINE('',#1053,#1054);+#1053 = CARTESIAN_POINT('',(-1.49,0.3,1.E-02));+#1054 = VECTOR('',#1055,1.);+#1055 = DIRECTION('',(0.,0.,1.));+#1056 = ORIENTED_EDGE('',*,*,#1057,.F.);+#1057 = EDGE_CURVE('',#1058,#1050,#1060,.T.);+#1058 = VERTEX_POINT('',#1059);+#1059 = CARTESIAN_POINT('',(-1.49,0.5,0.2));+#1060 = LINE('',#1061,#1062);+#1061 = CARTESIAN_POINT('',(-1.49,0.945,0.2));+#1062 = VECTOR('',#1063,1.);+#1063 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#1064 = ORIENTED_EDGE('',*,*,#1065,.T.);+#1065 = EDGE_CURVE('',#1058,#272,#1066,.T.);+#1066 = LINE('',#1067,#1068);+#1067 = CARTESIAN_POINT('',(-1.49,0.5,1.E-02));+#1068 = VECTOR('',#1069,1.);+#1069 = DIRECTION('',(0.,0.,-1.));+#1070 = ORIENTED_EDGE('',*,*,#271,.F.);+#1071 = ORIENTED_EDGE('',*,*,#1072,.T.);+#1072 = EDGE_CURVE('',#264,#1073,#1075,.T.);+#1073 = VERTEX_POINT('',#1074);+#1074 = CARTESIAN_POINT('',(-1.49,0.7,0.2));+#1075 = LINE('',#1076,#1077);+#1076 = CARTESIAN_POINT('',(-1.49,0.7,1.E-02));+#1077 = VECTOR('',#1078,1.);+#1078 = DIRECTION('',(0.,0.,1.));+#1079 = ORIENTED_EDGE('',*,*,#1080,.F.);+#1080 = EDGE_CURVE('',#1081,#1073,#1083,.T.);+#1081 = VERTEX_POINT('',#1082);+#1082 = CARTESIAN_POINT('',(-1.49,0.9,0.2));+#1083 = LINE('',#1084,#1085);+#1084 = CARTESIAN_POINT('',(-1.49,1.145,0.2));+#1085 = VECTOR('',#1086,1.);+#1086 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#1087 = ORIENTED_EDGE('',*,*,#1088,.T.);+#1088 = EDGE_CURVE('',#1081,#240,#1089,.T.);+#1089 = LINE('',#1090,#1091);+#1090 = CARTESIAN_POINT('',(-1.49,0.9,1.E-02));+#1091 = VECTOR('',#1092,1.);+#1092 = DIRECTION('',(0.,0.,-1.));+#1093 = ORIENTED_EDGE('',*,*,#239,.F.);+#1094 = ORIENTED_EDGE('',*,*,#1095,.T.);+#1095 = EDGE_CURVE('',#232,#1096,#1098,.T.);+#1096 = VERTEX_POINT('',#1097);+#1097 = CARTESIAN_POINT('',(-1.49,1.1,0.2));+#1098 = LINE('',#1099,#1100);+#1099 = CARTESIAN_POINT('',(-1.49,1.1,1.E-02));+#1100 = VECTOR('',#1101,1.);+#1101 = DIRECTION('',(0.,0.,1.));+#1102 = ORIENTED_EDGE('',*,*,#1103,.F.);+#1103 = EDGE_CURVE('',#1104,#1096,#1106,.T.);+#1104 = VERTEX_POINT('',#1105);+#1105 = CARTESIAN_POINT('',(-1.49,1.3,0.2));+#1106 = LINE('',#1107,#1108);+#1107 = CARTESIAN_POINT('',(-1.49,1.345,0.2));+#1108 = VECTOR('',#1109,1.);+#1109 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#1110 = ORIENTED_EDGE('',*,*,#1111,.T.);+#1111 = EDGE_CURVE('',#1104,#208,#1112,.T.);+#1112 = LINE('',#1113,#1114);+#1113 = CARTESIAN_POINT('',(-1.49,1.3,1.E-02));+#1114 = VECTOR('',#1115,1.);+#1115 = DIRECTION('',(0.,0.,-1.));+#1116 = PLANE('',#1117);+#1117 = AXIS2_PLACEMENT_3D('',#1118,#1119,#1120);+#1118 = CARTESIAN_POINT('',(-1.49,1.49,2.E-02));+#1119 = DIRECTION('',(1.,2.22044604925E-16,0.));+#1120 = DIRECTION('',(0.,0.,1.));+#1121 = ADVANCED_FACE('',(#1122),#1140,.F.);+#1122 = FACE_BOUND('',#1123,.F.);+#1123 = EDGE_LOOP('',(#1124,#1132,#1133,#1134));+#1124 = ORIENTED_EDGE('',*,*,#1125,.F.);+#1125 = EDGE_CURVE('',#903,#1126,#1128,.T.);+#1126 = VERTEX_POINT('',#1127);+#1127 = CARTESIAN_POINT('',(1.2,1.1,0.));+#1128 = LINE('',#1129,#1130);+#1129 = CARTESIAN_POINT('',(1.2,1.3,0.));+#1130 = VECTOR('',#1131,1.);+#1131 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#1132 = ORIENTED_EDGE('',*,*,#926,.T.);+#1133 = ORIENTED_EDGE('',*,*,#655,.F.);+#1134 = ORIENTED_EDGE('',*,*,#1135,.F.);+#1135 = EDGE_CURVE('',#1126,#648,#1136,.T.);+#1136 = LINE('',#1137,#1138);+#1137 = CARTESIAN_POINT('',(1.2,1.1,0.));+#1138 = VECTOR('',#1139,1.);+#1139 = DIRECTION('',(0.,0.,1.));+#1140 = PLANE('',#1141);+#1141 = AXIS2_PLACEMENT_3D('',#1142,#1143,#1144);+#1142 = CARTESIAN_POINT('',(1.2,1.3,0.));+#1143 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1144 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#1145 = ADVANCED_FACE('',(#1146),#1180,.F.);+#1146 = FACE_BOUND('',#1147,.F.);+#1147 = EDGE_LOOP('',(#1148,#1158,#1164,#1165,#1166,#1174));+#1148 = ORIENTED_EDGE('',*,*,#1149,.F.);+#1149 = EDGE_CURVE('',#1150,#1152,#1154,.T.);+#1150 = VERTEX_POINT('',#1151);+#1151 = CARTESIAN_POINT('',(-1.2,1.3,0.));+#1152 = VERTEX_POINT('',#1153);+#1153 = CARTESIAN_POINT('',(-1.5,1.3,0.));+#1154 = LINE('',#1155,#1156);+#1155 = CARTESIAN_POINT('',(-1.2,1.3,0.));+#1156 = VECTOR('',#1157,1.);+#1157 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1158 = ORIENTED_EDGE('',*,*,#1159,.T.);+#1159 = EDGE_CURVE('',#1150,#216,#1160,.T.);+#1160 = LINE('',#1161,#1162);+#1161 = CARTESIAN_POINT('',(-1.2,1.3,0.));+#1162 = VECTOR('',#1163,1.);+#1163 = DIRECTION('',(0.,0.,1.));+#1164 = ORIENTED_EDGE('',*,*,#215,.F.);+#1165 = ORIENTED_EDGE('',*,*,#1111,.F.);+#1166 = ORIENTED_EDGE('',*,*,#1167,.T.);+#1167 = EDGE_CURVE('',#1104,#1168,#1170,.T.);+#1168 = VERTEX_POINT('',#1169);+#1169 = CARTESIAN_POINT('',(-1.5,1.3,0.2));+#1170 = LINE('',#1171,#1172);+#1171 = CARTESIAN_POINT('',(-1.2,1.3,0.2));+#1172 = VECTOR('',#1173,1.);+#1173 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1174 = ORIENTED_EDGE('',*,*,#1175,.F.);+#1175 = EDGE_CURVE('',#1152,#1168,#1176,.T.);+#1176 = LINE('',#1177,#1178);+#1177 = CARTESIAN_POINT('',(-1.5,1.3,0.));+#1178 = VECTOR('',#1179,1.);+#1179 = DIRECTION('',(0.,0.,1.));+#1180 = PLANE('',#1181);+#1181 = AXIS2_PLACEMENT_3D('',#1182,#1183,#1184);+#1182 = CARTESIAN_POINT('',(-1.2,1.3,0.));+#1183 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#1184 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1185 = ADVANCED_FACE('',(#1186),#1213,.F.);+#1186 = FACE_BOUND('',#1187,.F.);+#1187 = EDGE_LOOP('',(#1188,#1196,#1197,#1198,#1199,#1207));+#1188 = ORIENTED_EDGE('',*,*,#1189,.F.);+#1189 = EDGE_CURVE('',#1126,#1190,#1192,.T.);+#1190 = VERTEX_POINT('',#1191);+#1191 = CARTESIAN_POINT('',(1.5,1.1,0.));+#1192 = LINE('',#1193,#1194);+#1193 = CARTESIAN_POINT('',(1.2,1.1,0.));+#1194 = VECTOR('',#1195,1.);+#1195 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1196 = ORIENTED_EDGE('',*,*,#1135,.T.);+#1197 = ORIENTED_EDGE('',*,*,#647,.F.);+#1198 = ORIENTED_EDGE('',*,*,#846,.T.);+#1199 = ORIENTED_EDGE('',*,*,#1200,.T.);+#1200 = EDGE_CURVE('',#847,#1201,#1203,.T.);+#1201 = VERTEX_POINT('',#1202);+#1202 = CARTESIAN_POINT('',(1.5,1.1,0.2));+#1203 = LINE('',#1204,#1205);+#1204 = CARTESIAN_POINT('',(1.2,1.1,0.2));+#1205 = VECTOR('',#1206,1.);+#1206 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1207 = ORIENTED_EDGE('',*,*,#1208,.F.);+#1208 = EDGE_CURVE('',#1190,#1201,#1209,.T.);+#1209 = LINE('',#1210,#1211);+#1210 = CARTESIAN_POINT('',(1.5,1.1,0.));+#1211 = VECTOR('',#1212,1.);+#1212 = DIRECTION('',(0.,0.,1.));+#1213 = PLANE('',#1214);+#1214 = AXIS2_PLACEMENT_3D('',#1215,#1216,#1217);+#1215 = CARTESIAN_POINT('',(1.2,1.1,0.));+#1216 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#1217 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1218 = ADVANCED_FACE('',(#1219),#1237,.F.);+#1219 = FACE_BOUND('',#1220,.F.);+#1220 = EDGE_LOOP('',(#1221,#1229,#1235,#1236));+#1221 = ORIENTED_EDGE('',*,*,#1222,.F.);+#1222 = EDGE_CURVE('',#1223,#1150,#1225,.T.);+#1223 = VERTEX_POINT('',#1224);+#1224 = CARTESIAN_POINT('',(-1.2,1.1,0.));+#1225 = LINE('',#1226,#1227);+#1226 = CARTESIAN_POINT('',(-1.2,1.1,0.));+#1227 = VECTOR('',#1228,1.);+#1228 = DIRECTION('',(2.288475490444E-17,1.,0.));+#1229 = ORIENTED_EDGE('',*,*,#1230,.T.);+#1230 = EDGE_CURVE('',#1223,#224,#1231,.T.);+#1231 = LINE('',#1232,#1233);+#1232 = CARTESIAN_POINT('',(-1.2,1.1,0.));+#1233 = VECTOR('',#1234,1.);+#1234 = DIRECTION('',(0.,0.,1.));+#1235 = ORIENTED_EDGE('',*,*,#223,.F.);+#1236 = ORIENTED_EDGE('',*,*,#1159,.F.);+#1237 = PLANE('',#1238);+#1238 = AXIS2_PLACEMENT_3D('',#1239,#1240,#1241);+#1239 = CARTESIAN_POINT('',(-1.2,1.1,0.));+#1240 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1241 = DIRECTION('',(2.288475490444E-17,1.,0.));+#1242 = ADVANCED_FACE('',(#1243),#1270,.F.);+#1243 = FACE_BOUND('',#1244,.F.);+#1244 = EDGE_LOOP('',(#1245,#1253,#1261,#1267,#1268,#1269));+#1245 = ORIENTED_EDGE('',*,*,#1246,.F.);+#1246 = EDGE_CURVE('',#1247,#1223,#1249,.T.);+#1247 = VERTEX_POINT('',#1248);+#1248 = CARTESIAN_POINT('',(-1.5,1.1,0.));+#1249 = LINE('',#1250,#1251);+#1250 = CARTESIAN_POINT('',(-1.5,1.1,0.));+#1251 = VECTOR('',#1252,1.);+#1252 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#1253 = ORIENTED_EDGE('',*,*,#1254,.T.);+#1254 = EDGE_CURVE('',#1247,#1255,#1257,.T.);+#1255 = VERTEX_POINT('',#1256);+#1256 = CARTESIAN_POINT('',(-1.5,1.1,0.2));+#1257 = LINE('',#1258,#1259);+#1258 = CARTESIAN_POINT('',(-1.5,1.1,0.));+#1259 = VECTOR('',#1260,1.);+#1260 = DIRECTION('',(0.,0.,1.));+#1261 = ORIENTED_EDGE('',*,*,#1262,.T.);+#1262 = EDGE_CURVE('',#1255,#1096,#1263,.T.);+#1263 = LINE('',#1264,#1265);+#1264 = CARTESIAN_POINT('',(-1.5,1.1,0.2));+#1265 = VECTOR('',#1266,1.);+#1266 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#1267 = ORIENTED_EDGE('',*,*,#1095,.F.);+#1268 = ORIENTED_EDGE('',*,*,#231,.F.);+#1269 = ORIENTED_EDGE('',*,*,#1230,.F.);+#1270 = PLANE('',#1271);+#1271 = AXIS2_PLACEMENT_3D('',#1272,#1273,#1274);+#1272 = CARTESIAN_POINT('',(-1.5,1.1,0.));+#1273 = DIRECTION('',(2.288475490444E-17,1.,0.));+#1274 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#1275 = ADVANCED_FACE('',(#1276),#1310,.F.);+#1276 = FACE_BOUND('',#1277,.F.);+#1277 = EDGE_LOOP('',(#1278,#1288,#1296,#1302,#1303,#1304));+#1278 = ORIENTED_EDGE('',*,*,#1279,.F.);+#1279 = EDGE_CURVE('',#1280,#1282,#1284,.T.);+#1280 = VERTEX_POINT('',#1281);+#1281 = CARTESIAN_POINT('',(1.5,0.9,0.));+#1282 = VERTEX_POINT('',#1283);+#1283 = CARTESIAN_POINT('',(1.2,0.9,0.));+#1284 = LINE('',#1285,#1286);+#1285 = CARTESIAN_POINT('',(1.5,0.9,0.));+#1286 = VECTOR('',#1287,1.);+#1287 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#1288 = ORIENTED_EDGE('',*,*,#1289,.T.);+#1289 = EDGE_CURVE('',#1280,#1290,#1292,.T.);+#1290 = VERTEX_POINT('',#1291);+#1291 = CARTESIAN_POINT('',(1.5,0.9,0.2));+#1292 = LINE('',#1293,#1294);+#1293 = CARTESIAN_POINT('',(1.5,0.9,0.));+#1294 = VECTOR('',#1295,1.);+#1295 = DIRECTION('',(0.,0.,1.));+#1296 = ORIENTED_EDGE('',*,*,#1297,.T.);+#1297 = EDGE_CURVE('',#1290,#832,#1298,.T.);+#1298 = LINE('',#1299,#1300);+#1299 = CARTESIAN_POINT('',(1.5,0.9,0.2));+#1300 = VECTOR('',#1301,1.);+#1301 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#1302 = ORIENTED_EDGE('',*,*,#839,.T.);+#1303 = ORIENTED_EDGE('',*,*,#631,.F.);+#1304 = ORIENTED_EDGE('',*,*,#1305,.F.);+#1305 = EDGE_CURVE('',#1282,#624,#1306,.T.);+#1306 = LINE('',#1307,#1308);+#1307 = CARTESIAN_POINT('',(1.2,0.9,0.));+#1308 = VECTOR('',#1309,1.);+#1309 = DIRECTION('',(0.,0.,1.));+#1310 = PLANE('',#1311);+#1311 = AXIS2_PLACEMENT_3D('',#1312,#1313,#1314);+#1312 = CARTESIAN_POINT('',(1.5,0.9,0.));+#1313 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#1314 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#1315 = ADVANCED_FACE('',(#1316),#1334,.F.);+#1316 = FACE_BOUND('',#1317,.F.);+#1317 = EDGE_LOOP('',(#1318,#1326,#1327,#1328));+#1318 = ORIENTED_EDGE('',*,*,#1319,.F.);+#1319 = EDGE_CURVE('',#1282,#1320,#1322,.T.);+#1320 = VERTEX_POINT('',#1321);+#1321 = CARTESIAN_POINT('',(1.2,0.7,0.));+#1322 = LINE('',#1323,#1324);+#1323 = CARTESIAN_POINT('',(1.2,0.9,0.));+#1324 = VECTOR('',#1325,1.);+#1325 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#1326 = ORIENTED_EDGE('',*,*,#1305,.T.);+#1327 = ORIENTED_EDGE('',*,*,#623,.F.);+#1328 = ORIENTED_EDGE('',*,*,#1329,.F.);+#1329 = EDGE_CURVE('',#1320,#616,#1330,.T.);+#1330 = LINE('',#1331,#1332);+#1331 = CARTESIAN_POINT('',(1.2,0.7,0.));+#1332 = VECTOR('',#1333,1.);+#1333 = DIRECTION('',(0.,0.,1.));+#1334 = PLANE('',#1335);+#1335 = AXIS2_PLACEMENT_3D('',#1336,#1337,#1338);+#1336 = CARTESIAN_POINT('',(1.2,0.9,0.));+#1337 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1338 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#1339 = ADVANCED_FACE('',(#1340),#1374,.F.);+#1340 = FACE_BOUND('',#1341,.F.);+#1341 = EDGE_LOOP('',(#1342,#1352,#1358,#1359,#1360,#1368));+#1342 = ORIENTED_EDGE('',*,*,#1343,.F.);+#1343 = EDGE_CURVE('',#1344,#1346,#1348,.T.);+#1344 = VERTEX_POINT('',#1345);+#1345 = CARTESIAN_POINT('',(-1.2,0.9,0.));+#1346 = VERTEX_POINT('',#1347);+#1347 = CARTESIAN_POINT('',(-1.5,0.9,0.));+#1348 = LINE('',#1349,#1350);+#1349 = CARTESIAN_POINT('',(-1.2,0.9,0.));+#1350 = VECTOR('',#1351,1.);+#1351 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1352 = ORIENTED_EDGE('',*,*,#1353,.T.);+#1353 = EDGE_CURVE('',#1344,#248,#1354,.T.);+#1354 = LINE('',#1355,#1356);+#1355 = CARTESIAN_POINT('',(-1.2,0.9,0.));+#1356 = VECTOR('',#1357,1.);+#1357 = DIRECTION('',(0.,0.,1.));+#1358 = ORIENTED_EDGE('',*,*,#247,.F.);+#1359 = ORIENTED_EDGE('',*,*,#1088,.F.);+#1360 = ORIENTED_EDGE('',*,*,#1361,.T.);+#1361 = EDGE_CURVE('',#1081,#1362,#1364,.T.);+#1362 = VERTEX_POINT('',#1363);+#1363 = CARTESIAN_POINT('',(-1.5,0.9,0.2));+#1364 = LINE('',#1365,#1366);+#1365 = CARTESIAN_POINT('',(-1.2,0.9,0.2));+#1366 = VECTOR('',#1367,1.);+#1367 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1368 = ORIENTED_EDGE('',*,*,#1369,.F.);+#1369 = EDGE_CURVE('',#1346,#1362,#1370,.T.);+#1370 = LINE('',#1371,#1372);+#1371 = CARTESIAN_POINT('',(-1.5,0.9,0.));+#1372 = VECTOR('',#1373,1.);+#1373 = DIRECTION('',(0.,0.,1.));+#1374 = PLANE('',#1375);+#1375 = AXIS2_PLACEMENT_3D('',#1376,#1377,#1378);+#1376 = CARTESIAN_POINT('',(-1.2,0.9,0.));+#1377 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#1378 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1379 = ADVANCED_FACE('',(#1380),#1407,.F.);+#1380 = FACE_BOUND('',#1381,.F.);+#1381 = EDGE_LOOP('',(#1382,#1390,#1391,#1392,#1393,#1401));+#1382 = ORIENTED_EDGE('',*,*,#1383,.F.);+#1383 = EDGE_CURVE('',#1320,#1384,#1386,.T.);+#1384 = VERTEX_POINT('',#1385);+#1385 = CARTESIAN_POINT('',(1.5,0.7,0.));+#1386 = LINE('',#1387,#1388);+#1387 = CARTESIAN_POINT('',(1.2,0.7,0.));+#1388 = VECTOR('',#1389,1.);+#1389 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1390 = ORIENTED_EDGE('',*,*,#1329,.T.);+#1391 = ORIENTED_EDGE('',*,*,#615,.F.);+#1392 = ORIENTED_EDGE('',*,*,#823,.T.);+#1393 = ORIENTED_EDGE('',*,*,#1394,.T.);+#1394 = EDGE_CURVE('',#824,#1395,#1397,.T.);+#1395 = VERTEX_POINT('',#1396);+#1396 = CARTESIAN_POINT('',(1.5,0.7,0.2));+#1397 = LINE('',#1398,#1399);+#1398 = CARTESIAN_POINT('',(1.2,0.7,0.2));+#1399 = VECTOR('',#1400,1.);+#1400 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1401 = ORIENTED_EDGE('',*,*,#1402,.F.);+#1402 = EDGE_CURVE('',#1384,#1395,#1403,.T.);+#1403 = LINE('',#1404,#1405);+#1404 = CARTESIAN_POINT('',(1.5,0.7,0.));+#1405 = VECTOR('',#1406,1.);+#1406 = DIRECTION('',(0.,0.,1.));+#1407 = PLANE('',#1408);+#1408 = AXIS2_PLACEMENT_3D('',#1409,#1410,#1411);+#1409 = CARTESIAN_POINT('',(1.2,0.7,0.));+#1410 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#1411 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1412 = ADVANCED_FACE('',(#1413),#1431,.F.);+#1413 = FACE_BOUND('',#1414,.F.);+#1414 = EDGE_LOOP('',(#1415,#1423,#1429,#1430));+#1415 = ORIENTED_EDGE('',*,*,#1416,.F.);+#1416 = EDGE_CURVE('',#1417,#1344,#1419,.T.);+#1417 = VERTEX_POINT('',#1418);+#1418 = CARTESIAN_POINT('',(-1.2,0.7,0.));+#1419 = LINE('',#1420,#1421);+#1420 = CARTESIAN_POINT('',(-1.2,0.7,0.));+#1421 = VECTOR('',#1422,1.);+#1422 = DIRECTION('',(2.288475490444E-17,1.,0.));+#1423 = ORIENTED_EDGE('',*,*,#1424,.T.);+#1424 = EDGE_CURVE('',#1417,#256,#1425,.T.);+#1425 = LINE('',#1426,#1427);+#1426 = CARTESIAN_POINT('',(-1.2,0.7,0.));+#1427 = VECTOR('',#1428,1.);+#1428 = DIRECTION('',(0.,0.,1.));+#1429 = ORIENTED_EDGE('',*,*,#255,.F.);+#1430 = ORIENTED_EDGE('',*,*,#1353,.F.);+#1431 = PLANE('',#1432);+#1432 = AXIS2_PLACEMENT_3D('',#1433,#1434,#1435);+#1433 = CARTESIAN_POINT('',(-1.2,0.7,0.));+#1434 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1435 = DIRECTION('',(2.288475490444E-17,1.,0.));+#1436 = ADVANCED_FACE('',(#1437),#1464,.F.);+#1437 = FACE_BOUND('',#1438,.F.);+#1438 = EDGE_LOOP('',(#1439,#1447,#1455,#1461,#1462,#1463));+#1439 = ORIENTED_EDGE('',*,*,#1440,.F.);+#1440 = EDGE_CURVE('',#1441,#1417,#1443,.T.);+#1441 = VERTEX_POINT('',#1442);+#1442 = CARTESIAN_POINT('',(-1.5,0.7,0.));+#1443 = LINE('',#1444,#1445);+#1444 = CARTESIAN_POINT('',(-1.5,0.7,0.));+#1445 = VECTOR('',#1446,1.);+#1446 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#1447 = ORIENTED_EDGE('',*,*,#1448,.T.);+#1448 = EDGE_CURVE('',#1441,#1449,#1451,.T.);+#1449 = VERTEX_POINT('',#1450);+#1450 = CARTESIAN_POINT('',(-1.5,0.7,0.2));+#1451 = LINE('',#1452,#1453);+#1452 = CARTESIAN_POINT('',(-1.5,0.7,0.));+#1453 = VECTOR('',#1454,1.);+#1454 = DIRECTION('',(0.,0.,1.));+#1455 = ORIENTED_EDGE('',*,*,#1456,.T.);+#1456 = EDGE_CURVE('',#1449,#1073,#1457,.T.);+#1457 = LINE('',#1458,#1459);+#1458 = CARTESIAN_POINT('',(-1.5,0.7,0.2));+#1459 = VECTOR('',#1460,1.);+#1460 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#1461 = ORIENTED_EDGE('',*,*,#1072,.F.);+#1462 = ORIENTED_EDGE('',*,*,#263,.F.);+#1463 = ORIENTED_EDGE('',*,*,#1424,.F.);+#1464 = PLANE('',#1465);+#1465 = AXIS2_PLACEMENT_3D('',#1466,#1467,#1468);+#1466 = CARTESIAN_POINT('',(-1.5,0.7,0.));+#1467 = DIRECTION('',(2.288475490444E-17,1.,0.));+#1468 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#1469 = ADVANCED_FACE('',(#1470),#1504,.F.);+#1470 = FACE_BOUND('',#1471,.F.);+#1471 = EDGE_LOOP('',(#1472,#1482,#1490,#1496,#1497,#1498));+#1472 = ORIENTED_EDGE('',*,*,#1473,.F.);+#1473 = EDGE_CURVE('',#1474,#1476,#1478,.T.);+#1474 = VERTEX_POINT('',#1475);+#1475 = CARTESIAN_POINT('',(1.5,0.5,0.));+#1476 = VERTEX_POINT('',#1477);+#1477 = CARTESIAN_POINT('',(1.2,0.5,0.));+#1478 = LINE('',#1479,#1480);+#1479 = CARTESIAN_POINT('',(1.5,0.5,0.));+#1480 = VECTOR('',#1481,1.);+#1481 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#1482 = ORIENTED_EDGE('',*,*,#1483,.T.);+#1483 = EDGE_CURVE('',#1474,#1484,#1486,.T.);+#1484 = VERTEX_POINT('',#1485);+#1485 = CARTESIAN_POINT('',(1.5,0.5,0.2));+#1486 = LINE('',#1487,#1488);+#1487 = CARTESIAN_POINT('',(1.5,0.5,0.));+#1488 = VECTOR('',#1489,1.);+#1489 = DIRECTION('',(0.,0.,1.));+#1490 = ORIENTED_EDGE('',*,*,#1491,.T.);+#1491 = EDGE_CURVE('',#1484,#809,#1492,.T.);+#1492 = LINE('',#1493,#1494);+#1493 = CARTESIAN_POINT('',(1.5,0.5,0.2));+#1494 = VECTOR('',#1495,1.);+#1495 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#1496 = ORIENTED_EDGE('',*,*,#816,.T.);+#1497 = ORIENTED_EDGE('',*,*,#599,.F.);+#1498 = ORIENTED_EDGE('',*,*,#1499,.F.);+#1499 = EDGE_CURVE('',#1476,#592,#1500,.T.);+#1500 = LINE('',#1501,#1502);+#1501 = CARTESIAN_POINT('',(1.2,0.5,0.));+#1502 = VECTOR('',#1503,1.);+#1503 = DIRECTION('',(0.,0.,1.));+#1504 = PLANE('',#1505);+#1505 = AXIS2_PLACEMENT_3D('',#1506,#1507,#1508);+#1506 = CARTESIAN_POINT('',(1.5,0.5,0.));+#1507 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#1508 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#1509 = ADVANCED_FACE('',(#1510),#1528,.F.);+#1510 = FACE_BOUND('',#1511,.F.);+#1511 = EDGE_LOOP('',(#1512,#1520,#1521,#1522));+#1512 = ORIENTED_EDGE('',*,*,#1513,.F.);+#1513 = EDGE_CURVE('',#1476,#1514,#1516,.T.);+#1514 = VERTEX_POINT('',#1515);+#1515 = CARTESIAN_POINT('',(1.2,0.3,0.));+#1516 = LINE('',#1517,#1518);+#1517 = CARTESIAN_POINT('',(1.2,0.5,0.));+#1518 = VECTOR('',#1519,1.);+#1519 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#1520 = ORIENTED_EDGE('',*,*,#1499,.T.);+#1521 = ORIENTED_EDGE('',*,*,#591,.F.);+#1522 = ORIENTED_EDGE('',*,*,#1523,.F.);+#1523 = EDGE_CURVE('',#1514,#584,#1524,.T.);+#1524 = LINE('',#1525,#1526);+#1525 = CARTESIAN_POINT('',(1.2,0.3,0.));+#1526 = VECTOR('',#1527,1.);+#1527 = DIRECTION('',(0.,0.,1.));+#1528 = PLANE('',#1529);+#1529 = AXIS2_PLACEMENT_3D('',#1530,#1531,#1532);+#1530 = CARTESIAN_POINT('',(1.2,0.5,0.));+#1531 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1532 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#1533 = ADVANCED_FACE('',(#1534),#1568,.F.);+#1534 = FACE_BOUND('',#1535,.F.);+#1535 = EDGE_LOOP('',(#1536,#1546,#1552,#1553,#1554,#1562));+#1536 = ORIENTED_EDGE('',*,*,#1537,.F.);+#1537 = EDGE_CURVE('',#1538,#1540,#1542,.T.);+#1538 = VERTEX_POINT('',#1539);+#1539 = CARTESIAN_POINT('',(-1.2,0.5,0.));+#1540 = VERTEX_POINT('',#1541);+#1541 = CARTESIAN_POINT('',(-1.5,0.5,0.));+#1542 = LINE('',#1543,#1544);+#1543 = CARTESIAN_POINT('',(-1.2,0.5,0.));+#1544 = VECTOR('',#1545,1.);+#1545 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1546 = ORIENTED_EDGE('',*,*,#1547,.T.);+#1547 = EDGE_CURVE('',#1538,#280,#1548,.T.);+#1548 = LINE('',#1549,#1550);+#1549 = CARTESIAN_POINT('',(-1.2,0.5,0.));+#1550 = VECTOR('',#1551,1.);+#1551 = DIRECTION('',(0.,0.,1.));+#1552 = ORIENTED_EDGE('',*,*,#279,.F.);+#1553 = ORIENTED_EDGE('',*,*,#1065,.F.);+#1554 = ORIENTED_EDGE('',*,*,#1555,.T.);+#1555 = EDGE_CURVE('',#1058,#1556,#1558,.T.);+#1556 = VERTEX_POINT('',#1557);+#1557 = CARTESIAN_POINT('',(-1.5,0.5,0.2));+#1558 = LINE('',#1559,#1560);+#1559 = CARTESIAN_POINT('',(-1.2,0.5,0.2));+#1560 = VECTOR('',#1561,1.);+#1561 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1562 = ORIENTED_EDGE('',*,*,#1563,.F.);+#1563 = EDGE_CURVE('',#1540,#1556,#1564,.T.);+#1564 = LINE('',#1565,#1566);+#1565 = CARTESIAN_POINT('',(-1.5,0.5,0.));+#1566 = VECTOR('',#1567,1.);+#1567 = DIRECTION('',(0.,0.,1.));+#1568 = PLANE('',#1569);+#1569 = AXIS2_PLACEMENT_3D('',#1570,#1571,#1572);+#1570 = CARTESIAN_POINT('',(-1.2,0.5,0.));+#1571 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#1572 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1573 = ADVANCED_FACE('',(#1574),#1601,.F.);+#1574 = FACE_BOUND('',#1575,.F.);+#1575 = EDGE_LOOP('',(#1576,#1584,#1585,#1586,#1587,#1595));+#1576 = ORIENTED_EDGE('',*,*,#1577,.F.);+#1577 = EDGE_CURVE('',#1514,#1578,#1580,.T.);+#1578 = VERTEX_POINT('',#1579);+#1579 = CARTESIAN_POINT('',(1.5,0.3,0.));+#1580 = LINE('',#1581,#1582);+#1581 = CARTESIAN_POINT('',(1.2,0.3,0.));+#1582 = VECTOR('',#1583,1.);+#1583 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1584 = ORIENTED_EDGE('',*,*,#1523,.T.);+#1585 = ORIENTED_EDGE('',*,*,#583,.F.);+#1586 = ORIENTED_EDGE('',*,*,#800,.T.);+#1587 = ORIENTED_EDGE('',*,*,#1588,.T.);+#1588 = EDGE_CURVE('',#801,#1589,#1591,.T.);+#1589 = VERTEX_POINT('',#1590);+#1590 = CARTESIAN_POINT('',(1.5,0.3,0.2));+#1591 = LINE('',#1592,#1593);+#1592 = CARTESIAN_POINT('',(1.2,0.3,0.2));+#1593 = VECTOR('',#1594,1.);+#1594 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1595 = ORIENTED_EDGE('',*,*,#1596,.F.);+#1596 = EDGE_CURVE('',#1578,#1589,#1597,.T.);+#1597 = LINE('',#1598,#1599);+#1598 = CARTESIAN_POINT('',(1.5,0.3,0.));+#1599 = VECTOR('',#1600,1.);+#1600 = DIRECTION('',(0.,0.,1.));+#1601 = PLANE('',#1602);+#1602 = AXIS2_PLACEMENT_3D('',#1603,#1604,#1605);+#1603 = CARTESIAN_POINT('',(1.2,0.3,0.));+#1604 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#1605 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1606 = ADVANCED_FACE('',(#1607),#1625,.F.);+#1607 = FACE_BOUND('',#1608,.F.);+#1608 = EDGE_LOOP('',(#1609,#1617,#1623,#1624));+#1609 = ORIENTED_EDGE('',*,*,#1610,.F.);+#1610 = EDGE_CURVE('',#1611,#1538,#1613,.T.);+#1611 = VERTEX_POINT('',#1612);+#1612 = CARTESIAN_POINT('',(-1.2,0.3,0.));+#1613 = LINE('',#1614,#1615);+#1614 = CARTESIAN_POINT('',(-1.2,0.3,0.));+#1615 = VECTOR('',#1616,1.);+#1616 = DIRECTION('',(2.288475490444E-17,1.,0.));+#1617 = ORIENTED_EDGE('',*,*,#1618,.T.);+#1618 = EDGE_CURVE('',#1611,#288,#1619,.T.);+#1619 = LINE('',#1620,#1621);+#1620 = CARTESIAN_POINT('',(-1.2,0.3,0.));+#1621 = VECTOR('',#1622,1.);+#1622 = DIRECTION('',(0.,0.,1.));+#1623 = ORIENTED_EDGE('',*,*,#287,.F.);+#1624 = ORIENTED_EDGE('',*,*,#1547,.F.);+#1625 = PLANE('',#1626);+#1626 = AXIS2_PLACEMENT_3D('',#1627,#1628,#1629);+#1627 = CARTESIAN_POINT('',(-1.2,0.3,0.));+#1628 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1629 = DIRECTION('',(2.288475490444E-17,1.,0.));+#1630 = ADVANCED_FACE('',(#1631),#1658,.F.);+#1631 = FACE_BOUND('',#1632,.F.);+#1632 = EDGE_LOOP('',(#1633,#1641,#1649,#1655,#1656,#1657));+#1633 = ORIENTED_EDGE('',*,*,#1634,.F.);+#1634 = EDGE_CURVE('',#1635,#1611,#1637,.T.);+#1635 = VERTEX_POINT('',#1636);+#1636 = CARTESIAN_POINT('',(-1.5,0.3,0.));+#1637 = LINE('',#1638,#1639);+#1638 = CARTESIAN_POINT('',(-1.5,0.3,0.));+#1639 = VECTOR('',#1640,1.);+#1640 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#1641 = ORIENTED_EDGE('',*,*,#1642,.T.);+#1642 = EDGE_CURVE('',#1635,#1643,#1645,.T.);+#1643 = VERTEX_POINT('',#1644);+#1644 = CARTESIAN_POINT('',(-1.5,0.3,0.2));+#1645 = LINE('',#1646,#1647);+#1646 = CARTESIAN_POINT('',(-1.5,0.3,0.));+#1647 = VECTOR('',#1648,1.);+#1648 = DIRECTION('',(0.,0.,1.));+#1649 = ORIENTED_EDGE('',*,*,#1650,.T.);+#1650 = EDGE_CURVE('',#1643,#1050,#1651,.T.);+#1651 = LINE('',#1652,#1653);+#1652 = CARTESIAN_POINT('',(-1.5,0.3,0.2));+#1653 = VECTOR('',#1654,1.);+#1654 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#1655 = ORIENTED_EDGE('',*,*,#1049,.F.);+#1656 = ORIENTED_EDGE('',*,*,#295,.F.);+#1657 = ORIENTED_EDGE('',*,*,#1618,.F.);+#1658 = PLANE('',#1659);+#1659 = AXIS2_PLACEMENT_3D('',#1660,#1661,#1662);+#1660 = CARTESIAN_POINT('',(-1.5,0.3,0.));+#1661 = DIRECTION('',(2.288475490444E-17,1.,0.));+#1662 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#1663 = ADVANCED_FACE('',(#1664),#1698,.F.);+#1664 = FACE_BOUND('',#1665,.F.);+#1665 = EDGE_LOOP('',(#1666,#1676,#1684,#1690,#1691,#1692));+#1666 = ORIENTED_EDGE('',*,*,#1667,.F.);+#1667 = EDGE_CURVE('',#1668,#1670,#1672,.T.);+#1668 = VERTEX_POINT('',#1669);+#1669 = CARTESIAN_POINT('',(1.5,0.1,0.));+#1670 = VERTEX_POINT('',#1671);+#1671 = CARTESIAN_POINT('',(1.2,0.1,0.));+#1672 = LINE('',#1673,#1674);+#1673 = CARTESIAN_POINT('',(1.5,0.1,0.));+#1674 = VECTOR('',#1675,1.);+#1675 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#1676 = ORIENTED_EDGE('',*,*,#1677,.T.);+#1677 = EDGE_CURVE('',#1668,#1678,#1680,.T.);+#1678 = VERTEX_POINT('',#1679);+#1679 = CARTESIAN_POINT('',(1.5,0.1,0.2));+#1680 = LINE('',#1681,#1682);+#1681 = CARTESIAN_POINT('',(1.5,0.1,0.));+#1682 = VECTOR('',#1683,1.);+#1683 = DIRECTION('',(0.,0.,1.));+#1684 = ORIENTED_EDGE('',*,*,#1685,.T.);+#1685 = EDGE_CURVE('',#1678,#786,#1686,.T.);+#1686 = LINE('',#1687,#1688);+#1687 = CARTESIAN_POINT('',(1.5,0.1,0.2));+#1688 = VECTOR('',#1689,1.);+#1689 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#1690 = ORIENTED_EDGE('',*,*,#793,.T.);+#1691 = ORIENTED_EDGE('',*,*,#567,.F.);+#1692 = ORIENTED_EDGE('',*,*,#1693,.F.);+#1693 = EDGE_CURVE('',#1670,#560,#1694,.T.);+#1694 = LINE('',#1695,#1696);+#1695 = CARTESIAN_POINT('',(1.2,0.1,0.));+#1696 = VECTOR('',#1697,1.);+#1697 = DIRECTION('',(0.,0.,1.));+#1698 = PLANE('',#1699);+#1699 = AXIS2_PLACEMENT_3D('',#1700,#1701,#1702);+#1700 = CARTESIAN_POINT('',(1.5,0.1,0.));+#1701 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#1702 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#1703 = ADVANCED_FACE('',(#1704),#1722,.F.);+#1704 = FACE_BOUND('',#1705,.F.);+#1705 = EDGE_LOOP('',(#1706,#1714,#1715,#1716));+#1706 = ORIENTED_EDGE('',*,*,#1707,.F.);+#1707 = EDGE_CURVE('',#1670,#1708,#1710,.T.);+#1708 = VERTEX_POINT('',#1709);+#1709 = CARTESIAN_POINT('',(1.2,-1.E-01,0.));+#1710 = LINE('',#1711,#1712);+#1711 = CARTESIAN_POINT('',(1.2,0.1,0.));+#1712 = VECTOR('',#1713,1.);+#1713 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#1714 = ORIENTED_EDGE('',*,*,#1693,.T.);+#1715 = ORIENTED_EDGE('',*,*,#559,.F.);+#1716 = ORIENTED_EDGE('',*,*,#1717,.F.);+#1717 = EDGE_CURVE('',#1708,#552,#1718,.T.);+#1718 = LINE('',#1719,#1720);+#1719 = CARTESIAN_POINT('',(1.2,-1.E-01,0.));+#1720 = VECTOR('',#1721,1.);+#1721 = DIRECTION('',(0.,0.,1.));+#1722 = PLANE('',#1723);+#1723 = AXIS2_PLACEMENT_3D('',#1724,#1725,#1726);+#1724 = CARTESIAN_POINT('',(1.2,0.1,0.));+#1725 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1726 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#1727 = ADVANCED_FACE('',(#1728),#1762,.F.);+#1728 = FACE_BOUND('',#1729,.F.);+#1729 = EDGE_LOOP('',(#1730,#1740,#1746,#1747,#1748,#1756));+#1730 = ORIENTED_EDGE('',*,*,#1731,.F.);+#1731 = EDGE_CURVE('',#1732,#1734,#1736,.T.);+#1732 = VERTEX_POINT('',#1733);+#1733 = CARTESIAN_POINT('',(-1.2,1.E-01,0.));+#1734 = VERTEX_POINT('',#1735);+#1735 = CARTESIAN_POINT('',(-1.5,1.E-01,0.));+#1736 = LINE('',#1737,#1738);+#1737 = CARTESIAN_POINT('',(-1.2,1.E-01,0.));+#1738 = VECTOR('',#1739,1.);+#1739 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1740 = ORIENTED_EDGE('',*,*,#1741,.T.);+#1741 = EDGE_CURVE('',#1732,#312,#1742,.T.);+#1742 = LINE('',#1743,#1744);+#1743 = CARTESIAN_POINT('',(-1.2,1.E-01,0.));+#1744 = VECTOR('',#1745,1.);+#1745 = DIRECTION('',(0.,0.,1.));+#1746 = ORIENTED_EDGE('',*,*,#311,.F.);+#1747 = ORIENTED_EDGE('',*,*,#1042,.F.);+#1748 = ORIENTED_EDGE('',*,*,#1749,.T.);+#1749 = EDGE_CURVE('',#1035,#1750,#1752,.T.);+#1750 = VERTEX_POINT('',#1751);+#1751 = CARTESIAN_POINT('',(-1.5,1.E-01,0.2));+#1752 = LINE('',#1753,#1754);+#1753 = CARTESIAN_POINT('',(-1.2,1.E-01,0.2));+#1754 = VECTOR('',#1755,1.);+#1755 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1756 = ORIENTED_EDGE('',*,*,#1757,.F.);+#1757 = EDGE_CURVE('',#1734,#1750,#1758,.T.);+#1758 = LINE('',#1759,#1760);+#1759 = CARTESIAN_POINT('',(-1.5,1.E-01,0.));+#1760 = VECTOR('',#1761,1.);+#1761 = DIRECTION('',(0.,0.,1.));+#1762 = PLANE('',#1763);+#1763 = AXIS2_PLACEMENT_3D('',#1764,#1765,#1766);+#1764 = CARTESIAN_POINT('',(-1.2,1.E-01,0.));+#1765 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#1766 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1767 = ADVANCED_FACE('',(#1768),#1795,.F.);+#1768 = FACE_BOUND('',#1769,.F.);+#1769 = EDGE_LOOP('',(#1770,#1778,#1779,#1780,#1781,#1789));+#1770 = ORIENTED_EDGE('',*,*,#1771,.F.);+#1771 = EDGE_CURVE('',#1708,#1772,#1774,.T.);+#1772 = VERTEX_POINT('',#1773);+#1773 = CARTESIAN_POINT('',(1.5,-1.E-01,0.));+#1774 = LINE('',#1775,#1776);+#1775 = CARTESIAN_POINT('',(1.2,-1.E-01,0.));+#1776 = VECTOR('',#1777,1.);+#1777 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1778 = ORIENTED_EDGE('',*,*,#1717,.T.);+#1779 = ORIENTED_EDGE('',*,*,#551,.F.);+#1780 = ORIENTED_EDGE('',*,*,#777,.T.);+#1781 = ORIENTED_EDGE('',*,*,#1782,.T.);+#1782 = EDGE_CURVE('',#778,#1783,#1785,.T.);+#1783 = VERTEX_POINT('',#1784);+#1784 = CARTESIAN_POINT('',(1.5,-1.E-01,0.2));+#1785 = LINE('',#1786,#1787);+#1786 = CARTESIAN_POINT('',(1.2,-1.E-01,0.2));+#1787 = VECTOR('',#1788,1.);+#1788 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1789 = ORIENTED_EDGE('',*,*,#1790,.F.);+#1790 = EDGE_CURVE('',#1772,#1783,#1791,.T.);+#1791 = LINE('',#1792,#1793);+#1792 = CARTESIAN_POINT('',(1.5,-1.E-01,0.));+#1793 = VECTOR('',#1794,1.);+#1794 = DIRECTION('',(0.,0.,1.));+#1795 = PLANE('',#1796);+#1796 = AXIS2_PLACEMENT_3D('',#1797,#1798,#1799);+#1797 = CARTESIAN_POINT('',(1.2,-1.E-01,0.));+#1798 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#1799 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1800 = ADVANCED_FACE('',(#1801),#1819,.F.);+#1801 = FACE_BOUND('',#1802,.F.);+#1802 = EDGE_LOOP('',(#1803,#1811,#1817,#1818));+#1803 = ORIENTED_EDGE('',*,*,#1804,.F.);+#1804 = EDGE_CURVE('',#1805,#1732,#1807,.T.);+#1805 = VERTEX_POINT('',#1806);+#1806 = CARTESIAN_POINT('',(-1.2,-0.1,0.));+#1807 = LINE('',#1808,#1809);+#1808 = CARTESIAN_POINT('',(-1.2,-0.1,0.));+#1809 = VECTOR('',#1810,1.);+#1810 = DIRECTION('',(2.288475490444E-17,1.,0.));+#1811 = ORIENTED_EDGE('',*,*,#1812,.T.);+#1812 = EDGE_CURVE('',#1805,#320,#1813,.T.);+#1813 = LINE('',#1814,#1815);+#1814 = CARTESIAN_POINT('',(-1.2,-0.1,0.));+#1815 = VECTOR('',#1816,1.);+#1816 = DIRECTION('',(0.,0.,1.));+#1817 = ORIENTED_EDGE('',*,*,#319,.F.);+#1818 = ORIENTED_EDGE('',*,*,#1741,.F.);+#1819 = PLANE('',#1820);+#1820 = AXIS2_PLACEMENT_3D('',#1821,#1822,#1823);+#1821 = CARTESIAN_POINT('',(-1.2,-0.1,0.));+#1822 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1823 = DIRECTION('',(2.288475490444E-17,1.,0.));+#1824 = ADVANCED_FACE('',(#1825),#1852,.F.);+#1825 = FACE_BOUND('',#1826,.F.);+#1826 = EDGE_LOOP('',(#1827,#1835,#1843,#1849,#1850,#1851));+#1827 = ORIENTED_EDGE('',*,*,#1828,.F.);+#1828 = EDGE_CURVE('',#1829,#1805,#1831,.T.);+#1829 = VERTEX_POINT('',#1830);+#1830 = CARTESIAN_POINT('',(-1.5,-0.1,0.));+#1831 = LINE('',#1832,#1833);+#1832 = CARTESIAN_POINT('',(-1.5,-0.1,0.));+#1833 = VECTOR('',#1834,1.);+#1834 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#1835 = ORIENTED_EDGE('',*,*,#1836,.T.);+#1836 = EDGE_CURVE('',#1829,#1837,#1839,.T.);+#1837 = VERTEX_POINT('',#1838);+#1838 = CARTESIAN_POINT('',(-1.5,-0.1,0.2));+#1839 = LINE('',#1840,#1841);+#1840 = CARTESIAN_POINT('',(-1.5,-0.1,0.));+#1841 = VECTOR('',#1842,1.);+#1842 = DIRECTION('',(0.,0.,1.));+#1843 = ORIENTED_EDGE('',*,*,#1844,.T.);+#1844 = EDGE_CURVE('',#1837,#1027,#1845,.T.);+#1845 = LINE('',#1846,#1847);+#1846 = CARTESIAN_POINT('',(-1.5,-0.1,0.2));+#1847 = VECTOR('',#1848,1.);+#1848 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#1849 = ORIENTED_EDGE('',*,*,#1026,.F.);+#1850 = ORIENTED_EDGE('',*,*,#327,.F.);+#1851 = ORIENTED_EDGE('',*,*,#1812,.F.);+#1852 = PLANE('',#1853);+#1853 = AXIS2_PLACEMENT_3D('',#1854,#1855,#1856);+#1854 = CARTESIAN_POINT('',(-1.5,-0.1,0.));+#1855 = DIRECTION('',(2.288475490444E-17,1.,0.));+#1856 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#1857 = ADVANCED_FACE('',(#1858),#1892,.F.);+#1858 = FACE_BOUND('',#1859,.F.);+#1859 = EDGE_LOOP('',(#1860,#1870,#1878,#1884,#1885,#1886));+#1860 = ORIENTED_EDGE('',*,*,#1861,.F.);+#1861 = EDGE_CURVE('',#1862,#1864,#1866,.T.);+#1862 = VERTEX_POINT('',#1863);+#1863 = CARTESIAN_POINT('',(1.5,-0.3,0.));+#1864 = VERTEX_POINT('',#1865);+#1865 = CARTESIAN_POINT('',(1.2,-0.3,0.));+#1866 = LINE('',#1867,#1868);+#1867 = CARTESIAN_POINT('',(1.5,-0.3,0.));+#1868 = VECTOR('',#1869,1.);+#1869 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#1870 = ORIENTED_EDGE('',*,*,#1871,.T.);+#1871 = EDGE_CURVE('',#1862,#1872,#1874,.T.);+#1872 = VERTEX_POINT('',#1873);+#1873 = CARTESIAN_POINT('',(1.5,-0.3,0.2));+#1874 = LINE('',#1875,#1876);+#1875 = CARTESIAN_POINT('',(1.5,-0.3,0.));+#1876 = VECTOR('',#1877,1.);+#1877 = DIRECTION('',(0.,0.,1.));+#1878 = ORIENTED_EDGE('',*,*,#1879,.T.);+#1879 = EDGE_CURVE('',#1872,#763,#1880,.T.);+#1880 = LINE('',#1881,#1882);+#1881 = CARTESIAN_POINT('',(1.5,-0.3,0.2));+#1882 = VECTOR('',#1883,1.);+#1883 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#1884 = ORIENTED_EDGE('',*,*,#770,.T.);+#1885 = ORIENTED_EDGE('',*,*,#535,.F.);+#1886 = ORIENTED_EDGE('',*,*,#1887,.F.);+#1887 = EDGE_CURVE('',#1864,#528,#1888,.T.);+#1888 = LINE('',#1889,#1890);+#1889 = CARTESIAN_POINT('',(1.2,-0.3,0.));+#1890 = VECTOR('',#1891,1.);+#1891 = DIRECTION('',(0.,0.,1.));+#1892 = PLANE('',#1893);+#1893 = AXIS2_PLACEMENT_3D('',#1894,#1895,#1896);+#1894 = CARTESIAN_POINT('',(1.5,-0.3,0.));+#1895 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#1896 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#1897 = ADVANCED_FACE('',(#1898),#1916,.F.);+#1898 = FACE_BOUND('',#1899,.F.);+#1899 = EDGE_LOOP('',(#1900,#1908,#1909,#1910));+#1900 = ORIENTED_EDGE('',*,*,#1901,.F.);+#1901 = EDGE_CURVE('',#1864,#1902,#1904,.T.);+#1902 = VERTEX_POINT('',#1903);+#1903 = CARTESIAN_POINT('',(1.2,-0.5,0.));+#1904 = LINE('',#1905,#1906);+#1905 = CARTESIAN_POINT('',(1.2,-0.3,0.));+#1906 = VECTOR('',#1907,1.);+#1907 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#1908 = ORIENTED_EDGE('',*,*,#1887,.T.);+#1909 = ORIENTED_EDGE('',*,*,#527,.F.);+#1910 = ORIENTED_EDGE('',*,*,#1911,.F.);+#1911 = EDGE_CURVE('',#1902,#520,#1912,.T.);+#1912 = LINE('',#1913,#1914);+#1913 = CARTESIAN_POINT('',(1.2,-0.5,0.));+#1914 = VECTOR('',#1915,1.);+#1915 = DIRECTION('',(0.,0.,1.));+#1916 = PLANE('',#1917);+#1917 = AXIS2_PLACEMENT_3D('',#1918,#1919,#1920);+#1918 = CARTESIAN_POINT('',(1.2,-0.3,0.));+#1919 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1920 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#1921 = ADVANCED_FACE('',(#1922),#1956,.F.);+#1922 = FACE_BOUND('',#1923,.F.);+#1923 = EDGE_LOOP('',(#1924,#1934,#1940,#1941,#1942,#1950));+#1924 = ORIENTED_EDGE('',*,*,#1925,.F.);+#1925 = EDGE_CURVE('',#1926,#1928,#1930,.T.);+#1926 = VERTEX_POINT('',#1927);+#1927 = CARTESIAN_POINT('',(-1.2,-0.3,0.));+#1928 = VERTEX_POINT('',#1929);+#1929 = CARTESIAN_POINT('',(-1.5,-0.3,0.));+#1930 = LINE('',#1931,#1932);+#1931 = CARTESIAN_POINT('',(-1.2,-0.3,0.));+#1932 = VECTOR('',#1933,1.);+#1933 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1934 = ORIENTED_EDGE('',*,*,#1935,.T.);+#1935 = EDGE_CURVE('',#1926,#344,#1936,.T.);+#1936 = LINE('',#1937,#1938);+#1937 = CARTESIAN_POINT('',(-1.2,-0.3,0.));+#1938 = VECTOR('',#1939,1.);+#1939 = DIRECTION('',(0.,0.,1.));+#1940 = ORIENTED_EDGE('',*,*,#343,.F.);+#1941 = ORIENTED_EDGE('',*,*,#1019,.F.);+#1942 = ORIENTED_EDGE('',*,*,#1943,.T.);+#1943 = EDGE_CURVE('',#1012,#1944,#1946,.T.);+#1944 = VERTEX_POINT('',#1945);+#1945 = CARTESIAN_POINT('',(-1.5,-0.3,0.2));+#1946 = LINE('',#1947,#1948);+#1947 = CARTESIAN_POINT('',(-1.2,-0.3,0.2));+#1948 = VECTOR('',#1949,1.);+#1949 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1950 = ORIENTED_EDGE('',*,*,#1951,.F.);+#1951 = EDGE_CURVE('',#1928,#1944,#1952,.T.);+#1952 = LINE('',#1953,#1954);+#1953 = CARTESIAN_POINT('',(-1.5,-0.3,0.));+#1954 = VECTOR('',#1955,1.);+#1955 = DIRECTION('',(0.,0.,1.));+#1956 = PLANE('',#1957);+#1957 = AXIS2_PLACEMENT_3D('',#1958,#1959,#1960);+#1958 = CARTESIAN_POINT('',(-1.2,-0.3,0.));+#1959 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#1960 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#1961 = ADVANCED_FACE('',(#1962),#1989,.F.);+#1962 = FACE_BOUND('',#1963,.F.);+#1963 = EDGE_LOOP('',(#1964,#1972,#1973,#1974,#1975,#1983));+#1964 = ORIENTED_EDGE('',*,*,#1965,.F.);+#1965 = EDGE_CURVE('',#1902,#1966,#1968,.T.);+#1966 = VERTEX_POINT('',#1967);+#1967 = CARTESIAN_POINT('',(1.5,-0.5,0.));+#1968 = LINE('',#1969,#1970);+#1969 = CARTESIAN_POINT('',(1.2,-0.5,0.));+#1970 = VECTOR('',#1971,1.);+#1971 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1972 = ORIENTED_EDGE('',*,*,#1911,.T.);+#1973 = ORIENTED_EDGE('',*,*,#519,.F.);+#1974 = ORIENTED_EDGE('',*,*,#754,.T.);+#1975 = ORIENTED_EDGE('',*,*,#1976,.T.);+#1976 = EDGE_CURVE('',#755,#1977,#1979,.T.);+#1977 = VERTEX_POINT('',#1978);+#1978 = CARTESIAN_POINT('',(1.5,-0.5,0.2));+#1979 = LINE('',#1980,#1981);+#1980 = CARTESIAN_POINT('',(1.2,-0.5,0.2));+#1981 = VECTOR('',#1982,1.);+#1982 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1983 = ORIENTED_EDGE('',*,*,#1984,.F.);+#1984 = EDGE_CURVE('',#1966,#1977,#1985,.T.);+#1985 = LINE('',#1986,#1987);+#1986 = CARTESIAN_POINT('',(1.5,-0.5,0.));+#1987 = VECTOR('',#1988,1.);+#1988 = DIRECTION('',(0.,0.,1.));+#1989 = PLANE('',#1990);+#1990 = AXIS2_PLACEMENT_3D('',#1991,#1992,#1993);+#1991 = CARTESIAN_POINT('',(1.2,-0.5,0.));+#1992 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#1993 = DIRECTION('',(1.,9.95799250103E-17,0.));+#1994 = ADVANCED_FACE('',(#1995),#2013,.F.);+#1995 = FACE_BOUND('',#1996,.F.);+#1996 = EDGE_LOOP('',(#1997,#2005,#2011,#2012));+#1997 = ORIENTED_EDGE('',*,*,#1998,.F.);+#1998 = EDGE_CURVE('',#1999,#1926,#2001,.T.);+#1999 = VERTEX_POINT('',#2000);+#2000 = CARTESIAN_POINT('',(-1.2,-0.5,0.));+#2001 = LINE('',#2002,#2003);+#2002 = CARTESIAN_POINT('',(-1.2,-0.5,0.));+#2003 = VECTOR('',#2004,1.);+#2004 = DIRECTION('',(2.288475490444E-17,1.,0.));+#2005 = ORIENTED_EDGE('',*,*,#2006,.T.);+#2006 = EDGE_CURVE('',#1999,#352,#2007,.T.);+#2007 = LINE('',#2008,#2009);+#2008 = CARTESIAN_POINT('',(-1.2,-0.5,0.));+#2009 = VECTOR('',#2010,1.);+#2010 = DIRECTION('',(0.,0.,1.));+#2011 = ORIENTED_EDGE('',*,*,#351,.F.);+#2012 = ORIENTED_EDGE('',*,*,#1935,.F.);+#2013 = PLANE('',#2014);+#2014 = AXIS2_PLACEMENT_3D('',#2015,#2016,#2017);+#2015 = CARTESIAN_POINT('',(-1.2,-0.5,0.));+#2016 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#2017 = DIRECTION('',(2.288475490444E-17,1.,0.));+#2018 = ADVANCED_FACE('',(#2019),#2046,.F.);+#2019 = FACE_BOUND('',#2020,.F.);+#2020 = EDGE_LOOP('',(#2021,#2029,#2037,#2043,#2044,#2045));+#2021 = ORIENTED_EDGE('',*,*,#2022,.F.);+#2022 = EDGE_CURVE('',#2023,#1999,#2025,.T.);+#2023 = VERTEX_POINT('',#2024);+#2024 = CARTESIAN_POINT('',(-1.5,-0.5,0.));+#2025 = LINE('',#2026,#2027);+#2026 = CARTESIAN_POINT('',(-1.5,-0.5,0.));+#2027 = VECTOR('',#2028,1.);+#2028 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#2029 = ORIENTED_EDGE('',*,*,#2030,.T.);+#2030 = EDGE_CURVE('',#2023,#2031,#2033,.T.);+#2031 = VERTEX_POINT('',#2032);+#2032 = CARTESIAN_POINT('',(-1.5,-0.5,0.2));+#2033 = LINE('',#2034,#2035);+#2034 = CARTESIAN_POINT('',(-1.5,-0.5,0.));+#2035 = VECTOR('',#2036,1.);+#2036 = DIRECTION('',(0.,0.,1.));+#2037 = ORIENTED_EDGE('',*,*,#2038,.T.);+#2038 = EDGE_CURVE('',#2031,#1004,#2039,.T.);+#2039 = LINE('',#2040,#2041);+#2040 = CARTESIAN_POINT('',(-1.5,-0.5,0.2));+#2041 = VECTOR('',#2042,1.);+#2042 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#2043 = ORIENTED_EDGE('',*,*,#1003,.F.);+#2044 = ORIENTED_EDGE('',*,*,#359,.F.);+#2045 = ORIENTED_EDGE('',*,*,#2006,.F.);+#2046 = PLANE('',#2047);+#2047 = AXIS2_PLACEMENT_3D('',#2048,#2049,#2050);+#2048 = CARTESIAN_POINT('',(-1.5,-0.5,0.));+#2049 = DIRECTION('',(2.288475490444E-17,1.,0.));+#2050 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#2051 = ADVANCED_FACE('',(#2052),#2086,.F.);+#2052 = FACE_BOUND('',#2053,.F.);+#2053 = EDGE_LOOP('',(#2054,#2064,#2072,#2078,#2079,#2080));+#2054 = ORIENTED_EDGE('',*,*,#2055,.F.);+#2055 = EDGE_CURVE('',#2056,#2058,#2060,.T.);+#2056 = VERTEX_POINT('',#2057);+#2057 = CARTESIAN_POINT('',(1.5,-0.7,0.));+#2058 = VERTEX_POINT('',#2059);+#2059 = CARTESIAN_POINT('',(1.2,-0.7,0.));+#2060 = LINE('',#2061,#2062);+#2061 = CARTESIAN_POINT('',(1.5,-0.7,0.));+#2062 = VECTOR('',#2063,1.);+#2063 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#2064 = ORIENTED_EDGE('',*,*,#2065,.T.);+#2065 = EDGE_CURVE('',#2056,#2066,#2068,.T.);+#2066 = VERTEX_POINT('',#2067);+#2067 = CARTESIAN_POINT('',(1.5,-0.7,0.2));+#2068 = LINE('',#2069,#2070);+#2069 = CARTESIAN_POINT('',(1.5,-0.7,0.));+#2070 = VECTOR('',#2071,1.);+#2071 = DIRECTION('',(0.,0.,1.));+#2072 = ORIENTED_EDGE('',*,*,#2073,.T.);+#2073 = EDGE_CURVE('',#2066,#740,#2074,.T.);+#2074 = LINE('',#2075,#2076);+#2075 = CARTESIAN_POINT('',(1.5,-0.7,0.2));+#2076 = VECTOR('',#2077,1.);+#2077 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#2078 = ORIENTED_EDGE('',*,*,#747,.T.);+#2079 = ORIENTED_EDGE('',*,*,#503,.F.);+#2080 = ORIENTED_EDGE('',*,*,#2081,.F.);+#2081 = EDGE_CURVE('',#2058,#496,#2082,.T.);+#2082 = LINE('',#2083,#2084);+#2083 = CARTESIAN_POINT('',(1.2,-0.7,0.));+#2084 = VECTOR('',#2085,1.);+#2085 = DIRECTION('',(0.,0.,1.));+#2086 = PLANE('',#2087);+#2087 = AXIS2_PLACEMENT_3D('',#2088,#2089,#2090);+#2088 = CARTESIAN_POINT('',(1.5,-0.7,0.));+#2089 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#2090 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#2091 = ADVANCED_FACE('',(#2092),#2110,.F.);+#2092 = FACE_BOUND('',#2093,.F.);+#2093 = EDGE_LOOP('',(#2094,#2102,#2103,#2104));+#2094 = ORIENTED_EDGE('',*,*,#2095,.F.);+#2095 = EDGE_CURVE('',#2058,#2096,#2098,.T.);+#2096 = VERTEX_POINT('',#2097);+#2097 = CARTESIAN_POINT('',(1.2,-0.9,0.));+#2098 = LINE('',#2099,#2100);+#2099 = CARTESIAN_POINT('',(1.2,-0.7,0.));+#2100 = VECTOR('',#2101,1.);+#2101 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#2102 = ORIENTED_EDGE('',*,*,#2081,.T.);+#2103 = ORIENTED_EDGE('',*,*,#495,.F.);+#2104 = ORIENTED_EDGE('',*,*,#2105,.F.);+#2105 = EDGE_CURVE('',#2096,#488,#2106,.T.);+#2106 = LINE('',#2107,#2108);+#2107 = CARTESIAN_POINT('',(1.2,-0.9,0.));+#2108 = VECTOR('',#2109,1.);+#2109 = DIRECTION('',(0.,0.,1.));+#2110 = PLANE('',#2111);+#2111 = AXIS2_PLACEMENT_3D('',#2112,#2113,#2114);+#2112 = CARTESIAN_POINT('',(1.2,-0.7,0.));+#2113 = DIRECTION('',(1.,9.95799250103E-17,0.));+#2114 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#2115 = ADVANCED_FACE('',(#2116),#2150,.F.);+#2116 = FACE_BOUND('',#2117,.F.);+#2117 = EDGE_LOOP('',(#2118,#2128,#2134,#2135,#2136,#2144));+#2118 = ORIENTED_EDGE('',*,*,#2119,.F.);+#2119 = EDGE_CURVE('',#2120,#2122,#2124,.T.);+#2120 = VERTEX_POINT('',#2121);+#2121 = CARTESIAN_POINT('',(-1.2,-0.7,0.));+#2122 = VERTEX_POINT('',#2123);+#2123 = CARTESIAN_POINT('',(-1.5,-0.7,0.));+#2124 = LINE('',#2125,#2126);+#2125 = CARTESIAN_POINT('',(-1.2,-0.7,0.));+#2126 = VECTOR('',#2127,1.);+#2127 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#2128 = ORIENTED_EDGE('',*,*,#2129,.T.);+#2129 = EDGE_CURVE('',#2120,#376,#2130,.T.);+#2130 = LINE('',#2131,#2132);+#2131 = CARTESIAN_POINT('',(-1.2,-0.7,0.));+#2132 = VECTOR('',#2133,1.);+#2133 = DIRECTION('',(0.,0.,1.));+#2134 = ORIENTED_EDGE('',*,*,#375,.F.);+#2135 = ORIENTED_EDGE('',*,*,#996,.F.);+#2136 = ORIENTED_EDGE('',*,*,#2137,.T.);+#2137 = EDGE_CURVE('',#989,#2138,#2140,.T.);+#2138 = VERTEX_POINT('',#2139);+#2139 = CARTESIAN_POINT('',(-1.5,-0.7,0.2));+#2140 = LINE('',#2141,#2142);+#2141 = CARTESIAN_POINT('',(-1.2,-0.7,0.2));+#2142 = VECTOR('',#2143,1.);+#2143 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#2144 = ORIENTED_EDGE('',*,*,#2145,.F.);+#2145 = EDGE_CURVE('',#2122,#2138,#2146,.T.);+#2146 = LINE('',#2147,#2148);+#2147 = CARTESIAN_POINT('',(-1.5,-0.7,0.));+#2148 = VECTOR('',#2149,1.);+#2149 = DIRECTION('',(0.,0.,1.));+#2150 = PLANE('',#2151);+#2151 = AXIS2_PLACEMENT_3D('',#2152,#2153,#2154);+#2152 = CARTESIAN_POINT('',(-1.2,-0.7,0.));+#2153 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2154 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#2155 = ADVANCED_FACE('',(#2156),#2183,.F.);+#2156 = FACE_BOUND('',#2157,.F.);+#2157 = EDGE_LOOP('',(#2158,#2166,#2167,#2168,#2169,#2177));+#2158 = ORIENTED_EDGE('',*,*,#2159,.F.);+#2159 = EDGE_CURVE('',#2096,#2160,#2162,.T.);+#2160 = VERTEX_POINT('',#2161);+#2161 = CARTESIAN_POINT('',(1.5,-0.9,0.));+#2162 = LINE('',#2163,#2164);+#2163 = CARTESIAN_POINT('',(1.2,-0.9,0.));+#2164 = VECTOR('',#2165,1.);+#2165 = DIRECTION('',(1.,9.95799250103E-17,0.));+#2166 = ORIENTED_EDGE('',*,*,#2105,.T.);+#2167 = ORIENTED_EDGE('',*,*,#487,.F.);+#2168 = ORIENTED_EDGE('',*,*,#731,.T.);+#2169 = ORIENTED_EDGE('',*,*,#2170,.T.);+#2170 = EDGE_CURVE('',#732,#2171,#2173,.T.);+#2171 = VERTEX_POINT('',#2172);+#2172 = CARTESIAN_POINT('',(1.5,-0.9,0.2));+#2173 = LINE('',#2174,#2175);+#2174 = CARTESIAN_POINT('',(1.2,-0.9,0.2));+#2175 = VECTOR('',#2176,1.);+#2176 = DIRECTION('',(1.,9.95799250103E-17,0.));+#2177 = ORIENTED_EDGE('',*,*,#2178,.F.);+#2178 = EDGE_CURVE('',#2160,#2171,#2179,.T.);+#2179 = LINE('',#2180,#2181);+#2180 = CARTESIAN_POINT('',(1.5,-0.9,0.));+#2181 = VECTOR('',#2182,1.);+#2182 = DIRECTION('',(0.,0.,1.));+#2183 = PLANE('',#2184);+#2184 = AXIS2_PLACEMENT_3D('',#2185,#2186,#2187);+#2185 = CARTESIAN_POINT('',(1.2,-0.9,0.));+#2186 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2187 = DIRECTION('',(1.,9.95799250103E-17,0.));+#2188 = ADVANCED_FACE('',(#2189),#2207,.F.);+#2189 = FACE_BOUND('',#2190,.F.);+#2190 = EDGE_LOOP('',(#2191,#2199,#2205,#2206));+#2191 = ORIENTED_EDGE('',*,*,#2192,.F.);+#2192 = EDGE_CURVE('',#2193,#2120,#2195,.T.);+#2193 = VERTEX_POINT('',#2194);+#2194 = CARTESIAN_POINT('',(-1.2,-0.9,0.));+#2195 = LINE('',#2196,#2197);+#2196 = CARTESIAN_POINT('',(-1.2,-0.9,0.));+#2197 = VECTOR('',#2198,1.);+#2198 = DIRECTION('',(2.288475490444E-17,1.,0.));+#2199 = ORIENTED_EDGE('',*,*,#2200,.T.);+#2200 = EDGE_CURVE('',#2193,#384,#2201,.T.);+#2201 = LINE('',#2202,#2203);+#2202 = CARTESIAN_POINT('',(-1.2,-0.9,0.));+#2203 = VECTOR('',#2204,1.);+#2204 = DIRECTION('',(0.,0.,1.));+#2205 = ORIENTED_EDGE('',*,*,#383,.F.);+#2206 = ORIENTED_EDGE('',*,*,#2129,.F.);+#2207 = PLANE('',#2208);+#2208 = AXIS2_PLACEMENT_3D('',#2209,#2210,#2211);+#2209 = CARTESIAN_POINT('',(-1.2,-0.9,0.));+#2210 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#2211 = DIRECTION('',(2.288475490444E-17,1.,0.));+#2212 = ADVANCED_FACE('',(#2213),#2240,.F.);+#2213 = FACE_BOUND('',#2214,.F.);+#2214 = EDGE_LOOP('',(#2215,#2223,#2231,#2237,#2238,#2239));+#2215 = ORIENTED_EDGE('',*,*,#2216,.F.);+#2216 = EDGE_CURVE('',#2217,#2193,#2219,.T.);+#2217 = VERTEX_POINT('',#2218);+#2218 = CARTESIAN_POINT('',(-1.5,-0.9,0.));+#2219 = LINE('',#2220,#2221);+#2220 = CARTESIAN_POINT('',(-1.5,-0.9,0.));+#2221 = VECTOR('',#2222,1.);+#2222 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#2223 = ORIENTED_EDGE('',*,*,#2224,.T.);+#2224 = EDGE_CURVE('',#2217,#2225,#2227,.T.);+#2225 = VERTEX_POINT('',#2226);+#2226 = CARTESIAN_POINT('',(-1.5,-0.9,0.2));+#2227 = LINE('',#2228,#2229);+#2228 = CARTESIAN_POINT('',(-1.5,-0.9,0.));+#2229 = VECTOR('',#2230,1.);+#2230 = DIRECTION('',(0.,0.,1.));+#2231 = ORIENTED_EDGE('',*,*,#2232,.T.);+#2232 = EDGE_CURVE('',#2225,#981,#2233,.T.);+#2233 = LINE('',#2234,#2235);+#2234 = CARTESIAN_POINT('',(-1.5,-0.9,0.2));+#2235 = VECTOR('',#2236,1.);+#2236 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#2237 = ORIENTED_EDGE('',*,*,#980,.F.);+#2238 = ORIENTED_EDGE('',*,*,#391,.F.);+#2239 = ORIENTED_EDGE('',*,*,#2200,.F.);+#2240 = PLANE('',#2241);+#2241 = AXIS2_PLACEMENT_3D('',#2242,#2243,#2244);+#2242 = CARTESIAN_POINT('',(-1.5,-0.9,0.));+#2243 = DIRECTION('',(2.288475490444E-17,1.,0.));+#2244 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#2245 = ADVANCED_FACE('',(#2246),#2280,.F.);+#2246 = FACE_BOUND('',#2247,.F.);+#2247 = EDGE_LOOP('',(#2248,#2258,#2266,#2272,#2273,#2274));+#2248 = ORIENTED_EDGE('',*,*,#2249,.F.);+#2249 = EDGE_CURVE('',#2250,#2252,#2254,.T.);+#2250 = VERTEX_POINT('',#2251);+#2251 = CARTESIAN_POINT('',(1.5,-1.1,0.));+#2252 = VERTEX_POINT('',#2253);+#2253 = CARTESIAN_POINT('',(1.2,-1.1,0.));+#2254 = LINE('',#2255,#2256);+#2255 = CARTESIAN_POINT('',(1.5,-1.1,0.));+#2256 = VECTOR('',#2257,1.);+#2257 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#2258 = ORIENTED_EDGE('',*,*,#2259,.T.);+#2259 = EDGE_CURVE('',#2250,#2260,#2262,.T.);+#2260 = VERTEX_POINT('',#2261);+#2261 = CARTESIAN_POINT('',(1.5,-1.1,0.2));+#2262 = LINE('',#2263,#2264);+#2263 = CARTESIAN_POINT('',(1.5,-1.1,0.));+#2264 = VECTOR('',#2265,1.);+#2265 = DIRECTION('',(0.,0.,1.));+#2266 = ORIENTED_EDGE('',*,*,#2267,.T.);+#2267 = EDGE_CURVE('',#2260,#717,#2268,.T.);+#2268 = LINE('',#2269,#2270);+#2269 = CARTESIAN_POINT('',(1.5,-1.1,0.2));+#2270 = VECTOR('',#2271,1.);+#2271 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#2272 = ORIENTED_EDGE('',*,*,#724,.T.);+#2273 = ORIENTED_EDGE('',*,*,#471,.F.);+#2274 = ORIENTED_EDGE('',*,*,#2275,.F.);+#2275 = EDGE_CURVE('',#2252,#464,#2276,.T.);+#2276 = LINE('',#2277,#2278);+#2277 = CARTESIAN_POINT('',(1.2,-1.1,0.));+#2278 = VECTOR('',#2279,1.);+#2279 = DIRECTION('',(0.,0.,1.));+#2280 = PLANE('',#2281);+#2281 = AXIS2_PLACEMENT_3D('',#2282,#2283,#2284);+#2282 = CARTESIAN_POINT('',(1.5,-1.1,0.));+#2283 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#2284 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#2285 = ADVANCED_FACE('',(#2286),#2304,.F.);+#2286 = FACE_BOUND('',#2287,.F.);+#2287 = EDGE_LOOP('',(#2288,#2296,#2297,#2298));+#2288 = ORIENTED_EDGE('',*,*,#2289,.F.);+#2289 = EDGE_CURVE('',#2252,#2290,#2292,.T.);+#2290 = VERTEX_POINT('',#2291);+#2291 = CARTESIAN_POINT('',(1.2,-1.3,0.));+#2292 = LINE('',#2293,#2294);+#2293 = CARTESIAN_POINT('',(1.2,-1.1,0.));+#2294 = VECTOR('',#2295,1.);+#2295 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#2296 = ORIENTED_EDGE('',*,*,#2275,.T.);+#2297 = ORIENTED_EDGE('',*,*,#463,.F.);+#2298 = ORIENTED_EDGE('',*,*,#2299,.F.);+#2299 = EDGE_CURVE('',#2290,#456,#2300,.T.);+#2300 = LINE('',#2301,#2302);+#2301 = CARTESIAN_POINT('',(1.2,-1.3,0.));+#2302 = VECTOR('',#2303,1.);+#2303 = DIRECTION('',(0.,0.,1.));+#2304 = PLANE('',#2305);+#2305 = AXIS2_PLACEMENT_3D('',#2306,#2307,#2308);+#2306 = CARTESIAN_POINT('',(1.2,-1.1,0.));+#2307 = DIRECTION('',(1.,9.95799250103E-17,0.));+#2308 = DIRECTION('',(9.95799250103E-17,-1.,0.));+#2309 = ADVANCED_FACE('',(#2310),#2344,.F.);+#2310 = FACE_BOUND('',#2311,.F.);+#2311 = EDGE_LOOP('',(#2312,#2322,#2328,#2329,#2330,#2338));+#2312 = ORIENTED_EDGE('',*,*,#2313,.F.);+#2313 = EDGE_CURVE('',#2314,#2316,#2318,.T.);+#2314 = VERTEX_POINT('',#2315);+#2315 = CARTESIAN_POINT('',(-1.2,-1.1,0.));+#2316 = VERTEX_POINT('',#2317);+#2317 = CARTESIAN_POINT('',(-1.5,-1.1,0.));+#2318 = LINE('',#2319,#2320);+#2319 = CARTESIAN_POINT('',(-1.2,-1.1,0.));+#2320 = VECTOR('',#2321,1.);+#2321 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#2322 = ORIENTED_EDGE('',*,*,#2323,.T.);+#2323 = EDGE_CURVE('',#2314,#408,#2324,.T.);+#2324 = LINE('',#2325,#2326);+#2325 = CARTESIAN_POINT('',(-1.2,-1.1,0.));+#2326 = VECTOR('',#2327,1.);+#2327 = DIRECTION('',(0.,0.,1.));+#2328 = ORIENTED_EDGE('',*,*,#407,.F.);+#2329 = ORIENTED_EDGE('',*,*,#973,.F.);+#2330 = ORIENTED_EDGE('',*,*,#2331,.T.);+#2331 = EDGE_CURVE('',#966,#2332,#2334,.T.);+#2332 = VERTEX_POINT('',#2333);+#2333 = CARTESIAN_POINT('',(-1.5,-1.1,0.2));+#2334 = LINE('',#2335,#2336);+#2335 = CARTESIAN_POINT('',(-1.2,-1.1,0.2));+#2336 = VECTOR('',#2337,1.);+#2337 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#2338 = ORIENTED_EDGE('',*,*,#2339,.F.);+#2339 = EDGE_CURVE('',#2316,#2332,#2340,.T.);+#2340 = LINE('',#2341,#2342);+#2341 = CARTESIAN_POINT('',(-1.5,-1.1,0.));+#2342 = VECTOR('',#2343,1.);+#2343 = DIRECTION('',(0.,0.,1.));+#2344 = PLANE('',#2345);+#2345 = AXIS2_PLACEMENT_3D('',#2346,#2347,#2348);+#2346 = CARTESIAN_POINT('',(-1.2,-1.1,0.));+#2347 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2348 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#2349 = ADVANCED_FACE('',(#2350),#2377,.F.);+#2350 = FACE_BOUND('',#2351,.F.);+#2351 = EDGE_LOOP('',(#2352,#2360,#2361,#2362,#2363,#2371));+#2352 = ORIENTED_EDGE('',*,*,#2353,.F.);+#2353 = EDGE_CURVE('',#2290,#2354,#2356,.T.);+#2354 = VERTEX_POINT('',#2355);+#2355 = CARTESIAN_POINT('',(1.5,-1.3,0.));+#2356 = LINE('',#2357,#2358);+#2357 = CARTESIAN_POINT('',(1.2,-1.3,0.));+#2358 = VECTOR('',#2359,1.);+#2359 = DIRECTION('',(1.,9.95799250103E-17,0.));+#2360 = ORIENTED_EDGE('',*,*,#2299,.T.);+#2361 = ORIENTED_EDGE('',*,*,#455,.F.);+#2362 = ORIENTED_EDGE('',*,*,#708,.T.);+#2363 = ORIENTED_EDGE('',*,*,#2364,.T.);+#2364 = EDGE_CURVE('',#709,#2365,#2367,.T.);+#2365 = VERTEX_POINT('',#2366);+#2366 = CARTESIAN_POINT('',(1.5,-1.3,0.2));+#2367 = LINE('',#2368,#2369);+#2368 = CARTESIAN_POINT('',(1.2,-1.3,0.2));+#2369 = VECTOR('',#2370,1.);+#2370 = DIRECTION('',(1.,9.95799250103E-17,0.));+#2371 = ORIENTED_EDGE('',*,*,#2372,.F.);+#2372 = EDGE_CURVE('',#2354,#2365,#2373,.T.);+#2373 = LINE('',#2374,#2375);+#2374 = CARTESIAN_POINT('',(1.5,-1.3,0.));+#2375 = VECTOR('',#2376,1.);+#2376 = DIRECTION('',(0.,0.,1.));+#2377 = PLANE('',#2378);+#2378 = AXIS2_PLACEMENT_3D('',#2379,#2380,#2381);+#2379 = CARTESIAN_POINT('',(1.2,-1.3,0.));+#2380 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2381 = DIRECTION('',(1.,9.95799250103E-17,0.));+#2382 = ADVANCED_FACE('',(#2383),#2401,.F.);+#2383 = FACE_BOUND('',#2384,.F.);+#2384 = EDGE_LOOP('',(#2385,#2393,#2399,#2400));+#2385 = ORIENTED_EDGE('',*,*,#2386,.F.);+#2386 = EDGE_CURVE('',#2387,#2314,#2389,.T.);+#2387 = VERTEX_POINT('',#2388);+#2388 = CARTESIAN_POINT('',(-1.2,-1.3,0.));+#2389 = LINE('',#2390,#2391);+#2390 = CARTESIAN_POINT('',(-1.2,-1.3,0.));+#2391 = VECTOR('',#2392,1.);+#2392 = DIRECTION('',(2.288475490444E-17,1.,0.));+#2393 = ORIENTED_EDGE('',*,*,#2394,.T.);+#2394 = EDGE_CURVE('',#2387,#416,#2395,.T.);+#2395 = LINE('',#2396,#2397);+#2396 = CARTESIAN_POINT('',(-1.2,-1.3,0.));+#2397 = VECTOR('',#2398,1.);+#2398 = DIRECTION('',(0.,0.,1.));+#2399 = ORIENTED_EDGE('',*,*,#415,.F.);+#2400 = ORIENTED_EDGE('',*,*,#2323,.F.);+#2401 = PLANE('',#2402);+#2402 = AXIS2_PLACEMENT_3D('',#2403,#2404,#2405);+#2403 = CARTESIAN_POINT('',(-1.2,-1.3,0.));+#2404 = DIRECTION('',(-1.,2.288475490444E-17,0.));+#2405 = DIRECTION('',(2.288475490444E-17,1.,0.));+#2406 = ADVANCED_FACE('',(#2407),#2434,.F.);+#2407 = FACE_BOUND('',#2408,.F.);+#2408 = EDGE_LOOP('',(#2409,#2417,#2425,#2431,#2432,#2433));+#2409 = ORIENTED_EDGE('',*,*,#2410,.F.);+#2410 = EDGE_CURVE('',#2411,#2387,#2413,.T.);+#2411 = VERTEX_POINT('',#2412);+#2412 = CARTESIAN_POINT('',(-1.5,-1.3,0.));+#2413 = LINE('',#2414,#2415);+#2414 = CARTESIAN_POINT('',(-1.5,-1.3,0.));+#2415 = VECTOR('',#2416,1.);+#2416 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#2417 = ORIENTED_EDGE('',*,*,#2418,.T.);+#2418 = EDGE_CURVE('',#2411,#2419,#2421,.T.);+#2419 = VERTEX_POINT('',#2420);+#2420 = CARTESIAN_POINT('',(-1.5,-1.3,0.2));+#2421 = LINE('',#2422,#2423);+#2422 = CARTESIAN_POINT('',(-1.5,-1.3,0.));+#2423 = VECTOR('',#2424,1.);+#2424 = DIRECTION('',(0.,0.,1.));+#2425 = ORIENTED_EDGE('',*,*,#2426,.T.);+#2426 = EDGE_CURVE('',#2419,#958,#2427,.T.);+#2427 = LINE('',#2428,#2429);+#2428 = CARTESIAN_POINT('',(-1.5,-1.3,0.2));+#2429 = VECTOR('',#2430,1.);+#2430 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#2431 = ORIENTED_EDGE('',*,*,#957,.F.);+#2432 = ORIENTED_EDGE('',*,*,#423,.F.);+#2433 = ORIENTED_EDGE('',*,*,#2394,.F.);+#2434 = PLANE('',#2435);+#2435 = AXIS2_PLACEMENT_3D('',#2436,#2437,#2438);+#2436 = CARTESIAN_POINT('',(-1.5,-1.3,0.));+#2437 = DIRECTION('',(2.288475490444E-17,1.,0.));+#2438 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#2439 = ADVANCED_FACE('',(#2440),#2451,.T.);+#2440 = FACE_BOUND('',#2441,.T.);+#2441 = EDGE_LOOP('',(#2442,#2443,#2444,#2445));+#2442 = ORIENTED_EDGE('',*,*,#950,.F.);+#2443 = ORIENTED_EDGE('',*,*,#439,.T.);+#2444 = ORIENTED_EDGE('',*,*,#701,.T.);+#2445 = ORIENTED_EDGE('',*,*,#2446,.F.);+#2446 = EDGE_CURVE('',#943,#694,#2447,.T.);+#2447 = LINE('',#2448,#2449);+#2448 = CARTESIAN_POINT('',(-1.49,-1.49,0.77));+#2449 = VECTOR('',#2450,1.);+#2450 = DIRECTION('',(1.,2.22044604925E-16,0.));+#2451 = PLANE('',#2452);+#2452 = AXIS2_PLACEMENT_3D('',#2453,#2454,#2455);+#2453 = CARTESIAN_POINT('',(-1.49,-1.49,2.E-02));+#2454 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#2455 = DIRECTION('',(0.,0.,1.));+#2456 = ADVANCED_FACE('',(#2457,#2463),#2474,.T.);+#2457 = FACE_BOUND('',#2458,.T.);+#2458 = EDGE_LOOP('',(#2459,#2460,#2461,#2462));+#2459 = ORIENTED_EDGE('',*,*,#886,.F.);+#2460 = ORIENTED_EDGE('',*,*,#942,.T.);+#2461 = ORIENTED_EDGE('',*,*,#2446,.T.);+#2462 = ORIENTED_EDGE('',*,*,#693,.F.);+#2463 = FACE_BOUND('',#2464,.T.);+#2464 = EDGE_LOOP('',(#2465));+#2465 = ORIENTED_EDGE('',*,*,#2466,.T.);+#2466 = EDGE_CURVE('',#2467,#2467,#2469,.T.);+#2467 = VERTEX_POINT('',#2468);+#2468 = CARTESIAN_POINT('',(-1.02,0.82,0.77));+#2469 = CIRCLE('',#2470,0.2);+#2470 = AXIS2_PLACEMENT_3D('',#2471,#2472,#2473);+#2471 = CARTESIAN_POINT('',(-1.02,1.02,0.77));+#2472 = DIRECTION('',(0.,-0.,-1.));+#2473 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#2474 = PLANE('',#2475);+#2475 = AXIS2_PLACEMENT_3D('',#2476,#2477,#2478);+#2476 = CARTESIAN_POINT('',(-1.49,1.49,0.77));+#2477 = DIRECTION('',(0.,0.,1.));+#2478 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#2479 = ADVANCED_FACE('',(#2480),#2491,.T.);+#2480 = FACE_BOUND('',#2481,.T.);+#2481 = EDGE_LOOP('',(#2482,#2488,#2489,#2490));+#2482 = ORIENTED_EDGE('',*,*,#2483,.T.);+#2483 = EDGE_CURVE('',#1201,#911,#2484,.T.);+#2484 = LINE('',#2485,#2486);+#2485 = CARTESIAN_POINT('',(1.5,1.1,0.2));+#2486 = VECTOR('',#2487,1.);+#2487 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2488 = ORIENTED_EDGE('',*,*,#918,.T.);+#2489 = ORIENTED_EDGE('',*,*,#854,.T.);+#2490 = ORIENTED_EDGE('',*,*,#1200,.T.);+#2491 = PLANE('',#2492);+#2492 = AXIS2_PLACEMENT_3D('',#2493,#2494,#2495);+#2493 = CARTESIAN_POINT('',(1.35,1.2,0.2));+#2494 = DIRECTION('',(0.,0.,1.));+#2495 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2496 = ADVANCED_FACE('',(#2497),#2508,.T.);+#2497 = FACE_BOUND('',#2498,.T.);+#2498 = EDGE_LOOP('',(#2499,#2505,#2506,#2507));+#2499 = ORIENTED_EDGE('',*,*,#2500,.T.);+#2500 = EDGE_CURVE('',#2365,#2260,#2501,.T.);+#2501 = LINE('',#2502,#2503);+#2502 = CARTESIAN_POINT('',(1.5,-1.3,0.2));+#2503 = VECTOR('',#2504,1.);+#2504 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2505 = ORIENTED_EDGE('',*,*,#2267,.T.);+#2506 = ORIENTED_EDGE('',*,*,#716,.T.);+#2507 = ORIENTED_EDGE('',*,*,#2364,.T.);+#2508 = PLANE('',#2509);+#2509 = AXIS2_PLACEMENT_3D('',#2510,#2511,#2512);+#2510 = CARTESIAN_POINT('',(1.35,-1.2,0.2));+#2511 = DIRECTION('',(0.,0.,1.));+#2512 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2513 = ADVANCED_FACE('',(#2514),#2525,.T.);+#2514 = FACE_BOUND('',#2515,.T.);+#2515 = EDGE_LOOP('',(#2516,#2522,#2523,#2524));+#2516 = ORIENTED_EDGE('',*,*,#2517,.T.);+#2517 = EDGE_CURVE('',#1395,#1290,#2518,.T.);+#2518 = LINE('',#2519,#2520);+#2519 = CARTESIAN_POINT('',(1.5,0.7,0.2));+#2520 = VECTOR('',#2521,1.);+#2521 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2522 = ORIENTED_EDGE('',*,*,#1297,.T.);+#2523 = ORIENTED_EDGE('',*,*,#831,.T.);+#2524 = ORIENTED_EDGE('',*,*,#1394,.T.);+#2525 = PLANE('',#2526);+#2526 = AXIS2_PLACEMENT_3D('',#2527,#2528,#2529);+#2527 = CARTESIAN_POINT('',(1.35,0.8,0.2));+#2528 = DIRECTION('',(0.,0.,1.));+#2529 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2530 = ADVANCED_FACE('',(#2531),#2542,.T.);+#2531 = FACE_BOUND('',#2532,.T.);+#2532 = EDGE_LOOP('',(#2533,#2539,#2540,#2541));+#2533 = ORIENTED_EDGE('',*,*,#2534,.T.);+#2534 = EDGE_CURVE('',#2171,#2066,#2535,.T.);+#2535 = LINE('',#2536,#2537);+#2536 = CARTESIAN_POINT('',(1.5,-0.9,0.2));+#2537 = VECTOR('',#2538,1.);+#2538 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2539 = ORIENTED_EDGE('',*,*,#2073,.T.);+#2540 = ORIENTED_EDGE('',*,*,#739,.T.);+#2541 = ORIENTED_EDGE('',*,*,#2170,.T.);+#2542 = PLANE('',#2543);+#2543 = AXIS2_PLACEMENT_3D('',#2544,#2545,#2546);+#2544 = CARTESIAN_POINT('',(1.35,-0.8,0.2));+#2545 = DIRECTION('',(0.,0.,1.));+#2546 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2547 = ADVANCED_FACE('',(#2548),#2559,.T.);+#2548 = FACE_BOUND('',#2549,.T.);+#2549 = EDGE_LOOP('',(#2550,#2556,#2557,#2558));+#2550 = ORIENTED_EDGE('',*,*,#2551,.T.);+#2551 = EDGE_CURVE('',#1589,#1484,#2552,.T.);+#2552 = LINE('',#2553,#2554);+#2553 = CARTESIAN_POINT('',(1.5,0.3,0.2));+#2554 = VECTOR('',#2555,1.);+#2555 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2556 = ORIENTED_EDGE('',*,*,#1491,.T.);+#2557 = ORIENTED_EDGE('',*,*,#808,.T.);+#2558 = ORIENTED_EDGE('',*,*,#1588,.T.);+#2559 = PLANE('',#2560);+#2560 = AXIS2_PLACEMENT_3D('',#2561,#2562,#2563);+#2561 = CARTESIAN_POINT('',(1.35,0.4,0.2));+#2562 = DIRECTION('',(0.,0.,1.));+#2563 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2564 = ADVANCED_FACE('',(#2565),#2576,.T.);+#2565 = FACE_BOUND('',#2566,.T.);+#2566 = EDGE_LOOP('',(#2567,#2573,#2574,#2575));+#2567 = ORIENTED_EDGE('',*,*,#2568,.T.);+#2568 = EDGE_CURVE('',#1977,#1872,#2569,.T.);+#2569 = LINE('',#2570,#2571);+#2570 = CARTESIAN_POINT('',(1.5,-0.5,0.2));+#2571 = VECTOR('',#2572,1.);+#2572 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2573 = ORIENTED_EDGE('',*,*,#1879,.T.);+#2574 = ORIENTED_EDGE('',*,*,#762,.T.);+#2575 = ORIENTED_EDGE('',*,*,#1976,.T.);+#2576 = PLANE('',#2577);+#2577 = AXIS2_PLACEMENT_3D('',#2578,#2579,#2580);+#2578 = CARTESIAN_POINT('',(1.35,-0.4,0.2));+#2579 = DIRECTION('',(0.,0.,1.));+#2580 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2581 = ADVANCED_FACE('',(#2582),#2593,.T.);+#2582 = FACE_BOUND('',#2583,.T.);+#2583 = EDGE_LOOP('',(#2584,#2590,#2591,#2592));+#2584 = ORIENTED_EDGE('',*,*,#2585,.T.);+#2585 = EDGE_CURVE('',#1783,#1678,#2586,.T.);+#2586 = LINE('',#2587,#2588);+#2587 = CARTESIAN_POINT('',(1.5,-1.E-01,0.2));+#2588 = VECTOR('',#2589,1.);+#2589 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2590 = ORIENTED_EDGE('',*,*,#1685,.T.);+#2591 = ORIENTED_EDGE('',*,*,#785,.T.);+#2592 = ORIENTED_EDGE('',*,*,#1782,.T.);+#2593 = PLANE('',#2594);+#2594 = AXIS2_PLACEMENT_3D('',#2595,#2596,#2597);+#2595 = CARTESIAN_POINT('',(1.35,3.330669073875E-16,0.2));+#2596 = DIRECTION('',(0.,0.,1.));+#2597 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2598 = ADVANCED_FACE('',(#2599),#2610,.F.);+#2599 = FACE_BOUND('',#2600,.F.);+#2600 = EDGE_LOOP('',(#2601,#2602,#2603,#2604));+#2601 = ORIENTED_EDGE('',*,*,#900,.T.);+#2602 = ORIENTED_EDGE('',*,*,#1125,.T.);+#2603 = ORIENTED_EDGE('',*,*,#1189,.T.);+#2604 = ORIENTED_EDGE('',*,*,#2605,.T.);+#2605 = EDGE_CURVE('',#1190,#901,#2606,.T.);+#2606 = LINE('',#2607,#2608);+#2607 = CARTESIAN_POINT('',(1.5,1.1,0.));+#2608 = VECTOR('',#2609,1.);+#2609 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2610 = PLANE('',#2611);+#2611 = AXIS2_PLACEMENT_3D('',#2612,#2613,#2614);+#2612 = CARTESIAN_POINT('',(1.35,1.2,0.));+#2613 = DIRECTION('',(0.,0.,1.));+#2614 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2615 = ADVANCED_FACE('',(#2616),#2622,.F.);+#2616 = FACE_BOUND('',#2617,.F.);+#2617 = EDGE_LOOP('',(#2618,#2619,#2620,#2621));+#2618 = ORIENTED_EDGE('',*,*,#1208,.T.);+#2619 = ORIENTED_EDGE('',*,*,#2483,.T.);+#2620 = ORIENTED_EDGE('',*,*,#910,.F.);+#2621 = ORIENTED_EDGE('',*,*,#2605,.F.);+#2622 = PLANE('',#2623);+#2623 = AXIS2_PLACEMENT_3D('',#2624,#2625,#2626);+#2624 = CARTESIAN_POINT('',(1.5,1.1,0.));+#2625 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#2626 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2627 = ADVANCED_FACE('',(#2628),#2639,.T.);+#2628 = FACE_BOUND('',#2629,.T.);+#2629 = EDGE_LOOP('',(#2630,#2636,#2637,#2638));+#2630 = ORIENTED_EDGE('',*,*,#2631,.T.);+#2631 = EDGE_CURVE('',#1168,#1255,#2632,.T.);+#2632 = LINE('',#2633,#2634);+#2633 = CARTESIAN_POINT('',(-1.5,1.3,0.2));+#2634 = VECTOR('',#2635,1.);+#2635 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2636 = ORIENTED_EDGE('',*,*,#1262,.T.);+#2637 = ORIENTED_EDGE('',*,*,#1103,.F.);+#2638 = ORIENTED_EDGE('',*,*,#1167,.T.);+#2639 = PLANE('',#2640);+#2640 = AXIS2_PLACEMENT_3D('',#2641,#2642,#2643);+#2641 = CARTESIAN_POINT('',(-1.35,1.2,0.2));+#2642 = DIRECTION('',(0.,0.,1.));+#2643 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2644 = ADVANCED_FACE('',(#2645),#2656,.T.);+#2645 = FACE_BOUND('',#2646,.T.);+#2646 = EDGE_LOOP('',(#2647,#2653,#2654,#2655));+#2647 = ORIENTED_EDGE('',*,*,#2648,.T.);+#2648 = EDGE_CURVE('',#2332,#2419,#2649,.T.);+#2649 = LINE('',#2650,#2651);+#2650 = CARTESIAN_POINT('',(-1.5,-1.1,0.2));+#2651 = VECTOR('',#2652,1.);+#2652 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2653 = ORIENTED_EDGE('',*,*,#2426,.T.);+#2654 = ORIENTED_EDGE('',*,*,#965,.F.);+#2655 = ORIENTED_EDGE('',*,*,#2331,.T.);+#2656 = PLANE('',#2657);+#2657 = AXIS2_PLACEMENT_3D('',#2658,#2659,#2660);+#2658 = CARTESIAN_POINT('',(-1.35,-1.2,0.2));+#2659 = DIRECTION('',(0.,0.,1.));+#2660 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2661 = ADVANCED_FACE('',(#2662),#2673,.T.);+#2662 = FACE_BOUND('',#2663,.T.);+#2663 = EDGE_LOOP('',(#2664,#2670,#2671,#2672));+#2664 = ORIENTED_EDGE('',*,*,#2665,.T.);+#2665 = EDGE_CURVE('',#1362,#1449,#2666,.T.);+#2666 = LINE('',#2667,#2668);+#2667 = CARTESIAN_POINT('',(-1.5,0.9,0.2));+#2668 = VECTOR('',#2669,1.);+#2669 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2670 = ORIENTED_EDGE('',*,*,#1456,.T.);+#2671 = ORIENTED_EDGE('',*,*,#1080,.F.);+#2672 = ORIENTED_EDGE('',*,*,#1361,.T.);+#2673 = PLANE('',#2674);+#2674 = AXIS2_PLACEMENT_3D('',#2675,#2676,#2677);+#2675 = CARTESIAN_POINT('',(-1.35,0.8,0.2));+#2676 = DIRECTION('',(0.,0.,1.));+#2677 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2678 = ADVANCED_FACE('',(#2679),#2690,.T.);+#2679 = FACE_BOUND('',#2680,.T.);+#2680 = EDGE_LOOP('',(#2681,#2687,#2688,#2689));+#2681 = ORIENTED_EDGE('',*,*,#2682,.T.);+#2682 = EDGE_CURVE('',#2138,#2225,#2683,.T.);+#2683 = LINE('',#2684,#2685);+#2684 = CARTESIAN_POINT('',(-1.5,-0.7,0.2));+#2685 = VECTOR('',#2686,1.);+#2686 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2687 = ORIENTED_EDGE('',*,*,#2232,.T.);+#2688 = ORIENTED_EDGE('',*,*,#988,.F.);+#2689 = ORIENTED_EDGE('',*,*,#2137,.T.);+#2690 = PLANE('',#2691);+#2691 = AXIS2_PLACEMENT_3D('',#2692,#2693,#2694);+#2692 = CARTESIAN_POINT('',(-1.35,-0.8,0.2));+#2693 = DIRECTION('',(0.,0.,1.));+#2694 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2695 = ADVANCED_FACE('',(#2696),#2707,.T.);+#2696 = FACE_BOUND('',#2697,.T.);+#2697 = EDGE_LOOP('',(#2698,#2704,#2705,#2706));+#2698 = ORIENTED_EDGE('',*,*,#2699,.T.);+#2699 = EDGE_CURVE('',#1556,#1643,#2700,.T.);+#2700 = LINE('',#2701,#2702);+#2701 = CARTESIAN_POINT('',(-1.5,0.5,0.2));+#2702 = VECTOR('',#2703,1.);+#2703 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2704 = ORIENTED_EDGE('',*,*,#1650,.T.);+#2705 = ORIENTED_EDGE('',*,*,#1057,.F.);+#2706 = ORIENTED_EDGE('',*,*,#1555,.T.);+#2707 = PLANE('',#2708);+#2708 = AXIS2_PLACEMENT_3D('',#2709,#2710,#2711);+#2709 = CARTESIAN_POINT('',(-1.35,0.4,0.2));+#2710 = DIRECTION('',(0.,0.,1.));+#2711 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2712 = ADVANCED_FACE('',(#2713),#2724,.T.);+#2713 = FACE_BOUND('',#2714,.T.);+#2714 = EDGE_LOOP('',(#2715,#2721,#2722,#2723));+#2715 = ORIENTED_EDGE('',*,*,#2716,.T.);+#2716 = EDGE_CURVE('',#1944,#2031,#2717,.T.);+#2717 = LINE('',#2718,#2719);+#2718 = CARTESIAN_POINT('',(-1.5,-0.3,0.2));+#2719 = VECTOR('',#2720,1.);+#2720 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2721 = ORIENTED_EDGE('',*,*,#2038,.T.);+#2722 = ORIENTED_EDGE('',*,*,#1011,.F.);+#2723 = ORIENTED_EDGE('',*,*,#1943,.T.);+#2724 = PLANE('',#2725);+#2725 = AXIS2_PLACEMENT_3D('',#2726,#2727,#2728);+#2726 = CARTESIAN_POINT('',(-1.35,-0.4,0.2));+#2727 = DIRECTION('',(0.,0.,1.));+#2728 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2729 = ADVANCED_FACE('',(#2730),#2741,.T.);+#2730 = FACE_BOUND('',#2731,.T.);+#2731 = EDGE_LOOP('',(#2732,#2738,#2739,#2740));+#2732 = ORIENTED_EDGE('',*,*,#2733,.T.);+#2733 = EDGE_CURVE('',#1750,#1837,#2734,.T.);+#2734 = LINE('',#2735,#2736);+#2735 = CARTESIAN_POINT('',(-1.5,1.E-01,0.2));+#2736 = VECTOR('',#2737,1.);+#2737 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2738 = ORIENTED_EDGE('',*,*,#1844,.T.);+#2739 = ORIENTED_EDGE('',*,*,#1034,.F.);+#2740 = ORIENTED_EDGE('',*,*,#1749,.T.);+#2741 = PLANE('',#2742);+#2742 = AXIS2_PLACEMENT_3D('',#2743,#2744,#2745);+#2743 = CARTESIAN_POINT('',(-1.35,-1.665334536938E-16,0.2));+#2744 = DIRECTION('',(0.,0.,1.));+#2745 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2746 = ADVANCED_FACE('',(#2747),#2758,.F.);+#2747 = FACE_BOUND('',#2748,.F.);+#2748 = EDGE_LOOP('',(#2749,#2750,#2751,#2752));+#2749 = ORIENTED_EDGE('',*,*,#1246,.T.);+#2750 = ORIENTED_EDGE('',*,*,#1222,.T.);+#2751 = ORIENTED_EDGE('',*,*,#1149,.T.);+#2752 = ORIENTED_EDGE('',*,*,#2753,.T.);+#2753 = EDGE_CURVE('',#1152,#1247,#2754,.T.);+#2754 = LINE('',#2755,#2756);+#2755 = CARTESIAN_POINT('',(-1.5,1.3,0.));+#2756 = VECTOR('',#2757,1.);+#2757 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2758 = PLANE('',#2759);+#2759 = AXIS2_PLACEMENT_3D('',#2760,#2761,#2762);+#2760 = CARTESIAN_POINT('',(-1.35,1.2,0.));+#2761 = DIRECTION('',(0.,0.,1.));+#2762 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2763 = ADVANCED_FACE('',(#2764),#2770,.F.);+#2764 = FACE_BOUND('',#2765,.F.);+#2765 = EDGE_LOOP('',(#2766,#2767,#2768,#2769));+#2766 = ORIENTED_EDGE('',*,*,#1175,.T.);+#2767 = ORIENTED_EDGE('',*,*,#2631,.T.);+#2768 = ORIENTED_EDGE('',*,*,#1254,.F.);+#2769 = ORIENTED_EDGE('',*,*,#2753,.F.);+#2770 = PLANE('',#2771);+#2771 = AXIS2_PLACEMENT_3D('',#2772,#2773,#2774);+#2772 = CARTESIAN_POINT('',(-1.5,1.3,0.));+#2773 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#2774 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2775 = ADVANCED_FACE('',(#2776),#2787,.F.);+#2776 = FACE_BOUND('',#2777,.F.);+#2777 = EDGE_LOOP('',(#2778,#2779,#2780,#2781));+#2778 = ORIENTED_EDGE('',*,*,#1279,.T.);+#2779 = ORIENTED_EDGE('',*,*,#1319,.T.);+#2780 = ORIENTED_EDGE('',*,*,#1383,.T.);+#2781 = ORIENTED_EDGE('',*,*,#2782,.T.);+#2782 = EDGE_CURVE('',#1384,#1280,#2783,.T.);+#2783 = LINE('',#2784,#2785);+#2784 = CARTESIAN_POINT('',(1.5,0.7,0.));+#2785 = VECTOR('',#2786,1.);+#2786 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2787 = PLANE('',#2788);+#2788 = AXIS2_PLACEMENT_3D('',#2789,#2790,#2791);+#2789 = CARTESIAN_POINT('',(1.35,0.8,0.));+#2790 = DIRECTION('',(0.,0.,1.));+#2791 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2792 = ADVANCED_FACE('',(#2793),#2799,.F.);+#2793 = FACE_BOUND('',#2794,.F.);+#2794 = EDGE_LOOP('',(#2795,#2796,#2797,#2798));+#2795 = ORIENTED_EDGE('',*,*,#1402,.T.);+#2796 = ORIENTED_EDGE('',*,*,#2517,.T.);+#2797 = ORIENTED_EDGE('',*,*,#1289,.F.);+#2798 = ORIENTED_EDGE('',*,*,#2782,.F.);+#2799 = PLANE('',#2800);+#2800 = AXIS2_PLACEMENT_3D('',#2801,#2802,#2803);+#2801 = CARTESIAN_POINT('',(1.5,0.7,0.));+#2802 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#2803 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2804 = ADVANCED_FACE('',(#2805),#2816,.F.);+#2805 = FACE_BOUND('',#2806,.F.);+#2806 = EDGE_LOOP('',(#2807,#2808,#2809,#2810));+#2807 = ORIENTED_EDGE('',*,*,#1440,.T.);+#2808 = ORIENTED_EDGE('',*,*,#1416,.T.);+#2809 = ORIENTED_EDGE('',*,*,#1343,.T.);+#2810 = ORIENTED_EDGE('',*,*,#2811,.T.);+#2811 = EDGE_CURVE('',#1346,#1441,#2812,.T.);+#2812 = LINE('',#2813,#2814);+#2813 = CARTESIAN_POINT('',(-1.5,0.9,0.));+#2814 = VECTOR('',#2815,1.);+#2815 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2816 = PLANE('',#2817);+#2817 = AXIS2_PLACEMENT_3D('',#2818,#2819,#2820);+#2818 = CARTESIAN_POINT('',(-1.35,0.8,0.));+#2819 = DIRECTION('',(0.,0.,1.));+#2820 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2821 = ADVANCED_FACE('',(#2822),#2828,.F.);+#2822 = FACE_BOUND('',#2823,.F.);+#2823 = EDGE_LOOP('',(#2824,#2825,#2826,#2827));+#2824 = ORIENTED_EDGE('',*,*,#1369,.T.);+#2825 = ORIENTED_EDGE('',*,*,#2665,.T.);+#2826 = ORIENTED_EDGE('',*,*,#1448,.F.);+#2827 = ORIENTED_EDGE('',*,*,#2811,.F.);+#2828 = PLANE('',#2829);+#2829 = AXIS2_PLACEMENT_3D('',#2830,#2831,#2832);+#2830 = CARTESIAN_POINT('',(-1.5,0.9,0.));+#2831 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#2832 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2833 = ADVANCED_FACE('',(#2834),#2845,.F.);+#2834 = FACE_BOUND('',#2835,.F.);+#2835 = EDGE_LOOP('',(#2836,#2837,#2838,#2839));+#2836 = ORIENTED_EDGE('',*,*,#1473,.T.);+#2837 = ORIENTED_EDGE('',*,*,#1513,.T.);+#2838 = ORIENTED_EDGE('',*,*,#1577,.T.);+#2839 = ORIENTED_EDGE('',*,*,#2840,.T.);+#2840 = EDGE_CURVE('',#1578,#1474,#2841,.T.);+#2841 = LINE('',#2842,#2843);+#2842 = CARTESIAN_POINT('',(1.5,0.3,0.));+#2843 = VECTOR('',#2844,1.);+#2844 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2845 = PLANE('',#2846);+#2846 = AXIS2_PLACEMENT_3D('',#2847,#2848,#2849);+#2847 = CARTESIAN_POINT('',(1.35,0.4,0.));+#2848 = DIRECTION('',(0.,0.,1.));+#2849 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2850 = ADVANCED_FACE('',(#2851),#2857,.F.);+#2851 = FACE_BOUND('',#2852,.F.);+#2852 = EDGE_LOOP('',(#2853,#2854,#2855,#2856));+#2853 = ORIENTED_EDGE('',*,*,#1596,.T.);+#2854 = ORIENTED_EDGE('',*,*,#2551,.T.);+#2855 = ORIENTED_EDGE('',*,*,#1483,.F.);+#2856 = ORIENTED_EDGE('',*,*,#2840,.F.);+#2857 = PLANE('',#2858);+#2858 = AXIS2_PLACEMENT_3D('',#2859,#2860,#2861);+#2859 = CARTESIAN_POINT('',(1.5,0.3,0.));+#2860 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#2861 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2862 = ADVANCED_FACE('',(#2863),#2874,.F.);+#2863 = FACE_BOUND('',#2864,.F.);+#2864 = EDGE_LOOP('',(#2865,#2866,#2867,#2868));+#2865 = ORIENTED_EDGE('',*,*,#1634,.T.);+#2866 = ORIENTED_EDGE('',*,*,#1610,.T.);+#2867 = ORIENTED_EDGE('',*,*,#1537,.T.);+#2868 = ORIENTED_EDGE('',*,*,#2869,.T.);+#2869 = EDGE_CURVE('',#1540,#1635,#2870,.T.);+#2870 = LINE('',#2871,#2872);+#2871 = CARTESIAN_POINT('',(-1.5,0.5,0.));+#2872 = VECTOR('',#2873,1.);+#2873 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2874 = PLANE('',#2875);+#2875 = AXIS2_PLACEMENT_3D('',#2876,#2877,#2878);+#2876 = CARTESIAN_POINT('',(-1.35,0.4,0.));+#2877 = DIRECTION('',(0.,0.,1.));+#2878 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2879 = ADVANCED_FACE('',(#2880),#2886,.F.);+#2880 = FACE_BOUND('',#2881,.F.);+#2881 = EDGE_LOOP('',(#2882,#2883,#2884,#2885));+#2882 = ORIENTED_EDGE('',*,*,#1563,.T.);+#2883 = ORIENTED_EDGE('',*,*,#2699,.T.);+#2884 = ORIENTED_EDGE('',*,*,#1642,.F.);+#2885 = ORIENTED_EDGE('',*,*,#2869,.F.);+#2886 = PLANE('',#2887);+#2887 = AXIS2_PLACEMENT_3D('',#2888,#2889,#2890);+#2888 = CARTESIAN_POINT('',(-1.5,0.5,0.));+#2889 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#2890 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2891 = ADVANCED_FACE('',(#2892),#2903,.F.);+#2892 = FACE_BOUND('',#2893,.F.);+#2893 = EDGE_LOOP('',(#2894,#2895,#2896,#2897));+#2894 = ORIENTED_EDGE('',*,*,#1667,.T.);+#2895 = ORIENTED_EDGE('',*,*,#1707,.T.);+#2896 = ORIENTED_EDGE('',*,*,#1771,.T.);+#2897 = ORIENTED_EDGE('',*,*,#2898,.T.);+#2898 = EDGE_CURVE('',#1772,#1668,#2899,.T.);+#2899 = LINE('',#2900,#2901);+#2900 = CARTESIAN_POINT('',(1.5,-1.E-01,0.));+#2901 = VECTOR('',#2902,1.);+#2902 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2903 = PLANE('',#2904);+#2904 = AXIS2_PLACEMENT_3D('',#2905,#2906,#2907);+#2905 = CARTESIAN_POINT('',(1.35,3.330669073875E-16,0.));+#2906 = DIRECTION('',(0.,0.,1.));+#2907 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2908 = ADVANCED_FACE('',(#2909),#2915,.F.);+#2909 = FACE_BOUND('',#2910,.F.);+#2910 = EDGE_LOOP('',(#2911,#2912,#2913,#2914));+#2911 = ORIENTED_EDGE('',*,*,#1790,.T.);+#2912 = ORIENTED_EDGE('',*,*,#2585,.T.);+#2913 = ORIENTED_EDGE('',*,*,#1677,.F.);+#2914 = ORIENTED_EDGE('',*,*,#2898,.F.);+#2915 = PLANE('',#2916);+#2916 = AXIS2_PLACEMENT_3D('',#2917,#2918,#2919);+#2917 = CARTESIAN_POINT('',(1.5,-1.E-01,0.));+#2918 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#2919 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2920 = ADVANCED_FACE('',(#2921),#2932,.F.);+#2921 = FACE_BOUND('',#2922,.F.);+#2922 = EDGE_LOOP('',(#2923,#2924,#2925,#2926));+#2923 = ORIENTED_EDGE('',*,*,#1828,.T.);+#2924 = ORIENTED_EDGE('',*,*,#1804,.T.);+#2925 = ORIENTED_EDGE('',*,*,#1731,.T.);+#2926 = ORIENTED_EDGE('',*,*,#2927,.T.);+#2927 = EDGE_CURVE('',#1734,#1829,#2928,.T.);+#2928 = LINE('',#2929,#2930);+#2929 = CARTESIAN_POINT('',(-1.5,1.E-01,0.));+#2930 = VECTOR('',#2931,1.);+#2931 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2932 = PLANE('',#2933);+#2933 = AXIS2_PLACEMENT_3D('',#2934,#2935,#2936);+#2934 = CARTESIAN_POINT('',(-1.35,-1.665334536938E-16,0.));+#2935 = DIRECTION('',(0.,0.,1.));+#2936 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2937 = ADVANCED_FACE('',(#2938),#2944,.F.);+#2938 = FACE_BOUND('',#2939,.F.);+#2939 = EDGE_LOOP('',(#2940,#2941,#2942,#2943));+#2940 = ORIENTED_EDGE('',*,*,#1757,.T.);+#2941 = ORIENTED_EDGE('',*,*,#2733,.T.);+#2942 = ORIENTED_EDGE('',*,*,#1836,.F.);+#2943 = ORIENTED_EDGE('',*,*,#2927,.F.);+#2944 = PLANE('',#2945);+#2945 = AXIS2_PLACEMENT_3D('',#2946,#2947,#2948);+#2946 = CARTESIAN_POINT('',(-1.5,1.E-01,0.));+#2947 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#2948 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2949 = ADVANCED_FACE('',(#2950),#2961,.F.);+#2950 = FACE_BOUND('',#2951,.F.);+#2951 = EDGE_LOOP('',(#2952,#2953,#2954,#2955));+#2952 = ORIENTED_EDGE('',*,*,#1861,.T.);+#2953 = ORIENTED_EDGE('',*,*,#1901,.T.);+#2954 = ORIENTED_EDGE('',*,*,#1965,.T.);+#2955 = ORIENTED_EDGE('',*,*,#2956,.T.);+#2956 = EDGE_CURVE('',#1966,#1862,#2957,.T.);+#2957 = LINE('',#2958,#2959);+#2958 = CARTESIAN_POINT('',(1.5,-0.5,0.));+#2959 = VECTOR('',#2960,1.);+#2960 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2961 = PLANE('',#2962);+#2962 = AXIS2_PLACEMENT_3D('',#2963,#2964,#2965);+#2963 = CARTESIAN_POINT('',(1.35,-0.4,0.));+#2964 = DIRECTION('',(0.,0.,1.));+#2965 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2966 = ADVANCED_FACE('',(#2967),#2973,.F.);+#2967 = FACE_BOUND('',#2968,.F.);+#2968 = EDGE_LOOP('',(#2969,#2970,#2971,#2972));+#2969 = ORIENTED_EDGE('',*,*,#1984,.T.);+#2970 = ORIENTED_EDGE('',*,*,#2568,.T.);+#2971 = ORIENTED_EDGE('',*,*,#1871,.F.);+#2972 = ORIENTED_EDGE('',*,*,#2956,.F.);+#2973 = PLANE('',#2974);+#2974 = AXIS2_PLACEMENT_3D('',#2975,#2976,#2977);+#2975 = CARTESIAN_POINT('',(1.5,-0.5,0.));+#2976 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#2977 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#2978 = ADVANCED_FACE('',(#2979),#2990,.F.);+#2979 = FACE_BOUND('',#2980,.F.);+#2980 = EDGE_LOOP('',(#2981,#2982,#2983,#2984));+#2981 = ORIENTED_EDGE('',*,*,#2022,.T.);+#2982 = ORIENTED_EDGE('',*,*,#1998,.T.);+#2983 = ORIENTED_EDGE('',*,*,#1925,.T.);+#2984 = ORIENTED_EDGE('',*,*,#2985,.T.);+#2985 = EDGE_CURVE('',#1928,#2023,#2986,.T.);+#2986 = LINE('',#2987,#2988);+#2987 = CARTESIAN_POINT('',(-1.5,-0.3,0.));+#2988 = VECTOR('',#2989,1.);+#2989 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2990 = PLANE('',#2991);+#2991 = AXIS2_PLACEMENT_3D('',#2992,#2993,#2994);+#2992 = CARTESIAN_POINT('',(-1.35,-0.4,0.));+#2993 = DIRECTION('',(0.,0.,1.));+#2994 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#2995 = ADVANCED_FACE('',(#2996),#3002,.F.);+#2996 = FACE_BOUND('',#2997,.F.);+#2997 = EDGE_LOOP('',(#2998,#2999,#3000,#3001));+#2998 = ORIENTED_EDGE('',*,*,#1951,.T.);+#2999 = ORIENTED_EDGE('',*,*,#2716,.T.);+#3000 = ORIENTED_EDGE('',*,*,#2030,.F.);+#3001 = ORIENTED_EDGE('',*,*,#2985,.F.);+#3002 = PLANE('',#3003);+#3003 = AXIS2_PLACEMENT_3D('',#3004,#3005,#3006);+#3004 = CARTESIAN_POINT('',(-1.5,-0.3,0.));+#3005 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#3006 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#3007 = ADVANCED_FACE('',(#3008),#3019,.F.);+#3008 = FACE_BOUND('',#3009,.F.);+#3009 = EDGE_LOOP('',(#3010,#3011,#3012,#3013));+#3010 = ORIENTED_EDGE('',*,*,#2055,.T.);+#3011 = ORIENTED_EDGE('',*,*,#2095,.T.);+#3012 = ORIENTED_EDGE('',*,*,#2159,.T.);+#3013 = ORIENTED_EDGE('',*,*,#3014,.T.);+#3014 = EDGE_CURVE('',#2160,#2056,#3015,.T.);+#3015 = LINE('',#3016,#3017);+#3016 = CARTESIAN_POINT('',(1.5,-0.9,0.));+#3017 = VECTOR('',#3018,1.);+#3018 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#3019 = PLANE('',#3020);+#3020 = AXIS2_PLACEMENT_3D('',#3021,#3022,#3023);+#3021 = CARTESIAN_POINT('',(1.35,-0.8,0.));+#3022 = DIRECTION('',(0.,0.,1.));+#3023 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#3024 = ADVANCED_FACE('',(#3025),#3031,.F.);+#3025 = FACE_BOUND('',#3026,.F.);+#3026 = EDGE_LOOP('',(#3027,#3028,#3029,#3030));+#3027 = ORIENTED_EDGE('',*,*,#2178,.T.);+#3028 = ORIENTED_EDGE('',*,*,#2534,.T.);+#3029 = ORIENTED_EDGE('',*,*,#2065,.F.);+#3030 = ORIENTED_EDGE('',*,*,#3014,.F.);+#3031 = PLANE('',#3032);+#3032 = AXIS2_PLACEMENT_3D('',#3033,#3034,#3035);+#3033 = CARTESIAN_POINT('',(1.5,-0.9,0.));+#3034 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#3035 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#3036 = ADVANCED_FACE('',(#3037),#3048,.F.);+#3037 = FACE_BOUND('',#3038,.F.);+#3038 = EDGE_LOOP('',(#3039,#3040,#3041,#3042));+#3039 = ORIENTED_EDGE('',*,*,#2216,.T.);+#3040 = ORIENTED_EDGE('',*,*,#2192,.T.);+#3041 = ORIENTED_EDGE('',*,*,#2119,.T.);+#3042 = ORIENTED_EDGE('',*,*,#3043,.T.);+#3043 = EDGE_CURVE('',#2122,#2217,#3044,.T.);+#3044 = LINE('',#3045,#3046);+#3045 = CARTESIAN_POINT('',(-1.5,-0.7,0.));+#3046 = VECTOR('',#3047,1.);+#3047 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#3048 = PLANE('',#3049);+#3049 = AXIS2_PLACEMENT_3D('',#3050,#3051,#3052);+#3050 = CARTESIAN_POINT('',(-1.35,-0.8,0.));+#3051 = DIRECTION('',(0.,0.,1.));+#3052 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#3053 = ADVANCED_FACE('',(#3054),#3060,.F.);+#3054 = FACE_BOUND('',#3055,.F.);+#3055 = EDGE_LOOP('',(#3056,#3057,#3058,#3059));+#3056 = ORIENTED_EDGE('',*,*,#2145,.T.);+#3057 = ORIENTED_EDGE('',*,*,#2682,.T.);+#3058 = ORIENTED_EDGE('',*,*,#2224,.F.);+#3059 = ORIENTED_EDGE('',*,*,#3043,.F.);+#3060 = PLANE('',#3061);+#3061 = AXIS2_PLACEMENT_3D('',#3062,#3063,#3064);+#3062 = CARTESIAN_POINT('',(-1.5,-0.7,0.));+#3063 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#3064 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#3065 = ADVANCED_FACE('',(#3066),#3077,.F.);+#3066 = FACE_BOUND('',#3067,.F.);+#3067 = EDGE_LOOP('',(#3068,#3069,#3070,#3071));+#3068 = ORIENTED_EDGE('',*,*,#2249,.T.);+#3069 = ORIENTED_EDGE('',*,*,#2289,.T.);+#3070 = ORIENTED_EDGE('',*,*,#2353,.T.);+#3071 = ORIENTED_EDGE('',*,*,#3072,.T.);+#3072 = EDGE_CURVE('',#2354,#2250,#3073,.T.);+#3073 = LINE('',#3074,#3075);+#3074 = CARTESIAN_POINT('',(1.5,-1.3,0.));+#3075 = VECTOR('',#3076,1.);+#3076 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#3077 = PLANE('',#3078);+#3078 = AXIS2_PLACEMENT_3D('',#3079,#3080,#3081);+#3079 = CARTESIAN_POINT('',(1.35,-1.2,0.));+#3080 = DIRECTION('',(0.,0.,1.));+#3081 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#3082 = ADVANCED_FACE('',(#3083),#3089,.F.);+#3083 = FACE_BOUND('',#3084,.F.);+#3084 = EDGE_LOOP('',(#3085,#3086,#3087,#3088));+#3085 = ORIENTED_EDGE('',*,*,#2372,.T.);+#3086 = ORIENTED_EDGE('',*,*,#2500,.T.);+#3087 = ORIENTED_EDGE('',*,*,#2259,.F.);+#3088 = ORIENTED_EDGE('',*,*,#3072,.F.);+#3089 = PLANE('',#3090);+#3090 = AXIS2_PLACEMENT_3D('',#3091,#3092,#3093);+#3091 = CARTESIAN_POINT('',(1.5,-1.3,0.));+#3092 = DIRECTION('',(-1.,-9.95799250103E-17,0.));+#3093 = DIRECTION('',(-9.95799250103E-17,1.,0.));+#3094 = ADVANCED_FACE('',(#3095),#3106,.F.);+#3095 = FACE_BOUND('',#3096,.F.);+#3096 = EDGE_LOOP('',(#3097,#3098,#3099,#3100));+#3097 = ORIENTED_EDGE('',*,*,#2410,.T.);+#3098 = ORIENTED_EDGE('',*,*,#2386,.T.);+#3099 = ORIENTED_EDGE('',*,*,#2313,.T.);+#3100 = ORIENTED_EDGE('',*,*,#3101,.T.);+#3101 = EDGE_CURVE('',#2316,#2411,#3102,.T.);+#3102 = LINE('',#3103,#3104);+#3103 = CARTESIAN_POINT('',(-1.5,-1.1,0.));+#3104 = VECTOR('',#3105,1.);+#3105 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#3106 = PLANE('',#3107);+#3107 = AXIS2_PLACEMENT_3D('',#3108,#3109,#3110);+#3108 = CARTESIAN_POINT('',(-1.35,-1.2,0.));+#3109 = DIRECTION('',(0.,0.,1.));+#3110 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#3111 = ADVANCED_FACE('',(#3112),#3118,.F.);+#3112 = FACE_BOUND('',#3113,.F.);+#3113 = EDGE_LOOP('',(#3114,#3115,#3116,#3117));+#3114 = ORIENTED_EDGE('',*,*,#2339,.T.);+#3115 = ORIENTED_EDGE('',*,*,#2648,.T.);+#3116 = ORIENTED_EDGE('',*,*,#2418,.F.);+#3117 = ORIENTED_EDGE('',*,*,#3101,.F.);+#3118 = PLANE('',#3119);+#3119 = AXIS2_PLACEMENT_3D('',#3120,#3121,#3122);+#3120 = CARTESIAN_POINT('',(-1.5,-1.1,0.));+#3121 = DIRECTION('',(1.,-2.288475490444E-17,0.));+#3122 = DIRECTION('',(-2.288475490444E-17,-1.,0.));+#3123 = ADVANCED_FACE('',(#3124),#3143,.F.);+#3124 = FACE_BOUND('',#3125,.T.);+#3125 = EDGE_LOOP('',(#3126,#3127,#3135,#3142));+#3126 = ORIENTED_EDGE('',*,*,#2466,.F.);+#3127 = ORIENTED_EDGE('',*,*,#3128,.T.);+#3128 = EDGE_CURVE('',#2467,#3129,#3131,.T.);+#3129 = VERTEX_POINT('',#3130);+#3130 = CARTESIAN_POINT('',(-1.02,0.82,0.76));+#3131 = LINE('',#3132,#3133);+#3132 = CARTESIAN_POINT('',(-1.02,0.82,0.78));+#3133 = VECTOR('',#3134,1.);+#3134 = DIRECTION('',(0.,-0.,-1.));+#3135 = ORIENTED_EDGE('',*,*,#3136,.F.);+#3136 = EDGE_CURVE('',#3129,#3129,#3137,.T.);+#3137 = CIRCLE('',#3138,0.2);+#3138 = AXIS2_PLACEMENT_3D('',#3139,#3140,#3141);+#3139 = CARTESIAN_POINT('',(-1.02,1.02,0.76));+#3140 = DIRECTION('',(-0.,0.,1.));+#3141 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#3142 = ORIENTED_EDGE('',*,*,#3128,.F.);+#3143 = CYLINDRICAL_SURFACE('',#3144,0.2);+#3144 = AXIS2_PLACEMENT_3D('',#3145,#3146,#3147);+#3145 = CARTESIAN_POINT('',(-1.02,1.02,0.78));+#3146 = DIRECTION('',(-0.,0.,-1.));+#3147 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#3148 = ADVANCED_FACE('',(#3149),#3152,.T.);+#3149 = FACE_BOUND('',#3150,.T.);+#3150 = EDGE_LOOP('',(#3151));+#3151 = ORIENTED_EDGE('',*,*,#3136,.T.);+#3152 = PLANE('',#3153);+#3153 = AXIS2_PLACEMENT_3D('',#3154,#3155,#3156);+#3154 = CARTESIAN_POINT('',(-1.02,1.02,0.76));+#3155 = DIRECTION('',(0.,0.,1.));+#3156 = DIRECTION('',(2.22044604925E-16,-1.,0.));+#3157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3)+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#3161))+GLOBAL_UNIT_ASSIGNED_CONTEXT((#3158,#3159,#3160)) REPRESENTATION_CONTEXT+('Context #1','3D Context with UNIT and UNCERTAINTY') );+#3158 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#3159 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#3160 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#3161 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-07),#3158,+'distance_accuracy_value','confusion accuracy');+#3162 = PRODUCT_TYPE('part',$,(#7));+#3163 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(+#3164,#3172,#3179,#3186,#3193,#3200,#3207,#3215,#3222,#3229,#3236,+#3243,#3250,#3257,#3264,#3271,#3278,#3285,#3292,#3299,#3306,#3313,+#3320,#3327,#3334,#3341,#3348,#3355,#3362,#3369,#3376,#3383,#3390,+#3397,#3404,#3411,#3418,#3425,#3432,#3439,#3446,#3453,#3460,#3467,+#3474,#3481,#3488,#3495,#3502,#3509,#3516,#3523,#3530,#3537,#3544,+#3551,#3558,#3565,#3572,#3579,#3586,#3593,#3600,#3607,#3614,#3621,+#3628,#3635,#3642,#3649,#3656,#3663,#3670,#3677,#3684,#3691,#3698,+#3705,#3712,#3719,#3726,#3733,#3740,#3747,#3754,#3761,#3768,#3775,+#3782,#3789,#3796,#3803,#3810,#3817,#3824,#3831,#3838,#3846),#3157);+#3164 = STYLED_ITEM('color',(#3165),#17);+#3165 = PRESENTATION_STYLE_ASSIGNMENT((#3166));+#3166 = SURFACE_STYLE_USAGE(.BOTH.,#3167);+#3167 = SURFACE_SIDE_STYLE('',(#3168));+#3168 = SURFACE_STYLE_FILL_AREA(#3169);+#3169 = FILL_AREA_STYLE('',(#3170));+#3170 = FILL_AREA_STYLE_COLOUR('',#3171);+#3171 = COLOUR_RGB('',0.824000000954,0.819999992847,0.78100001812);+#3172 = STYLED_ITEM('color',(#3173),#65);+#3173 = PRESENTATION_STYLE_ASSIGNMENT((#3174));+#3174 = SURFACE_STYLE_USAGE(.BOTH.,#3175);+#3175 = SURFACE_SIDE_STYLE('',(#3176));+#3176 = SURFACE_STYLE_FILL_AREA(#3177);+#3177 = FILL_AREA_STYLE('',(#3178));+#3178 = FILL_AREA_STYLE_COLOUR('',#3171);+#3179 = STYLED_ITEM('color',(#3180),#96);+#3180 = PRESENTATION_STYLE_ASSIGNMENT((#3181));+#3181 = SURFACE_STYLE_USAGE(.BOTH.,#3182);+#3182 = SURFACE_SIDE_STYLE('',(#3183));+#3183 = SURFACE_STYLE_FILL_AREA(#3184);+#3184 = FILL_AREA_STYLE('',(#3185));+#3185 = FILL_AREA_STYLE_COLOUR('',#3171);+#3186 = STYLED_ITEM('color',(#3187),#120);+#3187 = PRESENTATION_STYLE_ASSIGNMENT((#3188));+#3188 = SURFACE_STYLE_USAGE(.BOTH.,#3189);+#3189 = SURFACE_SIDE_STYLE('',(#3190));+#3190 = SURFACE_STYLE_FILL_AREA(#3191);+#3191 = FILL_AREA_STYLE('',(#3192));+#3192 = FILL_AREA_STYLE_COLOUR('',#3171);+#3193 = STYLED_ITEM('color',(#3194),#144);+#3194 = PRESENTATION_STYLE_ASSIGNMENT((#3195));+#3195 = SURFACE_STYLE_USAGE(.BOTH.,#3196);+#3196 = SURFACE_SIDE_STYLE('',(#3197));+#3197 = SURFACE_STYLE_FILL_AREA(#3198);+#3198 = FILL_AREA_STYLE('',(#3199));+#3199 = FILL_AREA_STYLE_COLOUR('',#3171);+#3200 = STYLED_ITEM('color',(#3201),#168);+#3201 = PRESENTATION_STYLE_ASSIGNMENT((#3202));+#3202 = SURFACE_STYLE_USAGE(.BOTH.,#3203);+#3203 = SURFACE_SIDE_STYLE('',(#3204));+#3204 = SURFACE_STYLE_FILL_AREA(#3205);+#3205 = FILL_AREA_STYLE('',(#3206));+#3206 = FILL_AREA_STYLE_COLOUR('',#3171);+#3207 = STYLED_ITEM('color',(#3208),#185);+#3208 = PRESENTATION_STYLE_ASSIGNMENT((#3209));+#3209 = SURFACE_STYLE_USAGE(.BOTH.,#3210);+#3210 = SURFACE_SIDE_STYLE('',(#3211));+#3211 = SURFACE_STYLE_FILL_AREA(#3212);+#3212 = FILL_AREA_STYLE('',(#3213));+#3213 = FILL_AREA_STYLE_COLOUR('',#3214);+#3214 = COLOUR_RGB('',0.148000001907,0.144999995828,0.144999995828);+#3215 = STYLED_ITEM('color',(#3216),#680);+#3216 = PRESENTATION_STYLE_ASSIGNMENT((#3217));+#3217 = SURFACE_STYLE_USAGE(.BOTH.,#3218);+#3218 = SURFACE_SIDE_STYLE('',(#3219));+#3219 = SURFACE_STYLE_FILL_AREA(#3220);+#3220 = FILL_AREA_STYLE('',(#3221));+#3221 = FILL_AREA_STYLE_COLOUR('',#3214);+#3222 = STYLED_ITEM('color',(#3223),#872);+#3223 = PRESENTATION_STYLE_ASSIGNMENT((#3224));+#3224 = SURFACE_STYLE_USAGE(.BOTH.,#3225);+#3225 = SURFACE_SIDE_STYLE('',(#3226));+#3226 = SURFACE_STYLE_FILL_AREA(#3227);+#3227 = FILL_AREA_STYLE('',(#3228));+#3228 = FILL_AREA_STYLE_COLOUR('',#3214);+#3229 = STYLED_ITEM('color',(#3230),#896);+#3230 = PRESENTATION_STYLE_ASSIGNMENT((#3231));+#3231 = SURFACE_STYLE_USAGE(.BOTH.,#3232);+#3232 = SURFACE_SIDE_STYLE('',(#3233));+#3233 = SURFACE_STYLE_FILL_AREA(#3234);+#3234 = FILL_AREA_STYLE('',(#3235));+#3235 = FILL_AREA_STYLE_COLOUR('',#3171);+#3236 = STYLED_ITEM('color',(#3237),#936);+#3237 = PRESENTATION_STYLE_ASSIGNMENT((#3238));+#3238 = SURFACE_STYLE_USAGE(.BOTH.,#3239);+#3239 = SURFACE_SIDE_STYLE('',(#3240));+#3240 = SURFACE_STYLE_FILL_AREA(#3241);+#3241 = FILL_AREA_STYLE('',(#3242));+#3242 = FILL_AREA_STYLE_COLOUR('',#3214);+#3243 = STYLED_ITEM('color',(#3244),#1121);+#3244 = PRESENTATION_STYLE_ASSIGNMENT((#3245));+#3245 = SURFACE_STYLE_USAGE(.BOTH.,#3246);+#3246 = SURFACE_SIDE_STYLE('',(#3247));+#3247 = SURFACE_STYLE_FILL_AREA(#3248);+#3248 = FILL_AREA_STYLE('',(#3249));+#3249 = FILL_AREA_STYLE_COLOUR('',#3171);+#3250 = STYLED_ITEM('color',(#3251),#1145);+#3251 = PRESENTATION_STYLE_ASSIGNMENT((#3252));+#3252 = SURFACE_STYLE_USAGE(.BOTH.,#3253);+#3253 = SURFACE_SIDE_STYLE('',(#3254));+#3254 = SURFACE_STYLE_FILL_AREA(#3255);+#3255 = FILL_AREA_STYLE('',(#3256));+#3256 = FILL_AREA_STYLE_COLOUR('',#3171);+#3257 = STYLED_ITEM('color',(#3258),#1185);+#3258 = PRESENTATION_STYLE_ASSIGNMENT((#3259));+#3259 = SURFACE_STYLE_USAGE(.BOTH.,#3260);+#3260 = SURFACE_SIDE_STYLE('',(#3261));+#3261 = SURFACE_STYLE_FILL_AREA(#3262);+#3262 = FILL_AREA_STYLE('',(#3263));+#3263 = FILL_AREA_STYLE_COLOUR('',#3171);+#3264 = STYLED_ITEM('color',(#3265),#1218);+#3265 = PRESENTATION_STYLE_ASSIGNMENT((#3266));+#3266 = SURFACE_STYLE_USAGE(.BOTH.,#3267);+#3267 = SURFACE_SIDE_STYLE('',(#3268));+#3268 = SURFACE_STYLE_FILL_AREA(#3269);+#3269 = FILL_AREA_STYLE('',(#3270));+#3270 = FILL_AREA_STYLE_COLOUR('',#3171);+#3271 = STYLED_ITEM('color',(#3272),#1242);+#3272 = PRESENTATION_STYLE_ASSIGNMENT((#3273));+#3273 = SURFACE_STYLE_USAGE(.BOTH.,#3274);+#3274 = SURFACE_SIDE_STYLE('',(#3275));+#3275 = SURFACE_STYLE_FILL_AREA(#3276);+#3276 = FILL_AREA_STYLE('',(#3277));+#3277 = FILL_AREA_STYLE_COLOUR('',#3171);+#3278 = STYLED_ITEM('color',(#3279),#1275);+#3279 = PRESENTATION_STYLE_ASSIGNMENT((#3280));+#3280 = SURFACE_STYLE_USAGE(.BOTH.,#3281);+#3281 = SURFACE_SIDE_STYLE('',(#3282));+#3282 = SURFACE_STYLE_FILL_AREA(#3283);+#3283 = FILL_AREA_STYLE('',(#3284));+#3284 = FILL_AREA_STYLE_COLOUR('',#3171);+#3285 = STYLED_ITEM('color',(#3286),#1315);+#3286 = PRESENTATION_STYLE_ASSIGNMENT((#3287));+#3287 = SURFACE_STYLE_USAGE(.BOTH.,#3288);+#3288 = SURFACE_SIDE_STYLE('',(#3289));+#3289 = SURFACE_STYLE_FILL_AREA(#3290);+#3290 = FILL_AREA_STYLE('',(#3291));+#3291 = FILL_AREA_STYLE_COLOUR('',#3171);+#3292 = STYLED_ITEM('color',(#3293),#1339);+#3293 = PRESENTATION_STYLE_ASSIGNMENT((#3294));+#3294 = SURFACE_STYLE_USAGE(.BOTH.,#3295);+#3295 = SURFACE_SIDE_STYLE('',(#3296));+#3296 = SURFACE_STYLE_FILL_AREA(#3297);+#3297 = FILL_AREA_STYLE('',(#3298));+#3298 = FILL_AREA_STYLE_COLOUR('',#3171);+#3299 = STYLED_ITEM('color',(#3300),#1379);+#3300 = PRESENTATION_STYLE_ASSIGNMENT((#3301));+#3301 = SURFACE_STYLE_USAGE(.BOTH.,#3302);+#3302 = SURFACE_SIDE_STYLE('',(#3303));+#3303 = SURFACE_STYLE_FILL_AREA(#3304);+#3304 = FILL_AREA_STYLE('',(#3305));+#3305 = FILL_AREA_STYLE_COLOUR('',#3171);+#3306 = STYLED_ITEM('color',(#3307),#1412);+#3307 = PRESENTATION_STYLE_ASSIGNMENT((#3308));+#3308 = SURFACE_STYLE_USAGE(.BOTH.,#3309);+#3309 = SURFACE_SIDE_STYLE('',(#3310));+#3310 = SURFACE_STYLE_FILL_AREA(#3311);+#3311 = FILL_AREA_STYLE('',(#3312));+#3312 = FILL_AREA_STYLE_COLOUR('',#3171);+#3313 = STYLED_ITEM('color',(#3314),#1436);+#3314 = PRESENTATION_STYLE_ASSIGNMENT((#3315));+#3315 = SURFACE_STYLE_USAGE(.BOTH.,#3316);+#3316 = SURFACE_SIDE_STYLE('',(#3317));+#3317 = SURFACE_STYLE_FILL_AREA(#3318);+#3318 = FILL_AREA_STYLE('',(#3319));+#3319 = FILL_AREA_STYLE_COLOUR('',#3171);+#3320 = STYLED_ITEM('color',(#3321),#1469);+#3321 = PRESENTATION_STYLE_ASSIGNMENT((#3322));+#3322 = SURFACE_STYLE_USAGE(.BOTH.,#3323);+#3323 = SURFACE_SIDE_STYLE('',(#3324));+#3324 = SURFACE_STYLE_FILL_AREA(#3325);+#3325 = FILL_AREA_STYLE('',(#3326));+#3326 = FILL_AREA_STYLE_COLOUR('',#3171);+#3327 = STYLED_ITEM('color',(#3328),#1509);+#3328 = PRESENTATION_STYLE_ASSIGNMENT((#3329));+#3329 = SURFACE_STYLE_USAGE(.BOTH.,#3330);+#3330 = SURFACE_SIDE_STYLE('',(#3331));+#3331 = SURFACE_STYLE_FILL_AREA(#3332);+#3332 = FILL_AREA_STYLE('',(#3333));+#3333 = FILL_AREA_STYLE_COLOUR('',#3171);+#3334 = STYLED_ITEM('color',(#3335),#1533);+#3335 = PRESENTATION_STYLE_ASSIGNMENT((#3336));+#3336 = SURFACE_STYLE_USAGE(.BOTH.,#3337);+#3337 = SURFACE_SIDE_STYLE('',(#3338));+#3338 = SURFACE_STYLE_FILL_AREA(#3339);+#3339 = FILL_AREA_STYLE('',(#3340));+#3340 = FILL_AREA_STYLE_COLOUR('',#3171);+#3341 = STYLED_ITEM('color',(#3342),#1573);+#3342 = PRESENTATION_STYLE_ASSIGNMENT((#3343));+#3343 = SURFACE_STYLE_USAGE(.BOTH.,#3344);+#3344 = SURFACE_SIDE_STYLE('',(#3345));+#3345 = SURFACE_STYLE_FILL_AREA(#3346);+#3346 = FILL_AREA_STYLE('',(#3347));+#3347 = FILL_AREA_STYLE_COLOUR('',#3171);+#3348 = STYLED_ITEM('color',(#3349),#1606);+#3349 = PRESENTATION_STYLE_ASSIGNMENT((#3350));+#3350 = SURFACE_STYLE_USAGE(.BOTH.,#3351);+#3351 = SURFACE_SIDE_STYLE('',(#3352));+#3352 = SURFACE_STYLE_FILL_AREA(#3353);+#3353 = FILL_AREA_STYLE('',(#3354));+#3354 = FILL_AREA_STYLE_COLOUR('',#3171);+#3355 = STYLED_ITEM('color',(#3356),#1630);+#3356 = PRESENTATION_STYLE_ASSIGNMENT((#3357));+#3357 = SURFACE_STYLE_USAGE(.BOTH.,#3358);+#3358 = SURFACE_SIDE_STYLE('',(#3359));+#3359 = SURFACE_STYLE_FILL_AREA(#3360);+#3360 = FILL_AREA_STYLE('',(#3361));+#3361 = FILL_AREA_STYLE_COLOUR('',#3171);+#3362 = STYLED_ITEM('color',(#3363),#1663);+#3363 = PRESENTATION_STYLE_ASSIGNMENT((#3364));+#3364 = SURFACE_STYLE_USAGE(.BOTH.,#3365);+#3365 = SURFACE_SIDE_STYLE('',(#3366));+#3366 = SURFACE_STYLE_FILL_AREA(#3367);+#3367 = FILL_AREA_STYLE('',(#3368));+#3368 = FILL_AREA_STYLE_COLOUR('',#3171);+#3369 = STYLED_ITEM('color',(#3370),#1703);+#3370 = PRESENTATION_STYLE_ASSIGNMENT((#3371));+#3371 = SURFACE_STYLE_USAGE(.BOTH.,#3372);+#3372 = SURFACE_SIDE_STYLE('',(#3373));+#3373 = SURFACE_STYLE_FILL_AREA(#3374);+#3374 = FILL_AREA_STYLE('',(#3375));+#3375 = FILL_AREA_STYLE_COLOUR('',#3171);+#3376 = STYLED_ITEM('color',(#3377),#1727);+#3377 = PRESENTATION_STYLE_ASSIGNMENT((#3378));+#3378 = SURFACE_STYLE_USAGE(.BOTH.,#3379);+#3379 = SURFACE_SIDE_STYLE('',(#3380));+#3380 = SURFACE_STYLE_FILL_AREA(#3381);+#3381 = FILL_AREA_STYLE('',(#3382));+#3382 = FILL_AREA_STYLE_COLOUR('',#3171);+#3383 = STYLED_ITEM('color',(#3384),#1767);+#3384 = PRESENTATION_STYLE_ASSIGNMENT((#3385));+#3385 = SURFACE_STYLE_USAGE(.BOTH.,#3386);+#3386 = SURFACE_SIDE_STYLE('',(#3387));+#3387 = SURFACE_STYLE_FILL_AREA(#3388);+#3388 = FILL_AREA_STYLE('',(#3389));+#3389 = FILL_AREA_STYLE_COLOUR('',#3171);+#3390 = STYLED_ITEM('color',(#3391),#1800);+#3391 = PRESENTATION_STYLE_ASSIGNMENT((#3392));+#3392 = SURFACE_STYLE_USAGE(.BOTH.,#3393);+#3393 = SURFACE_SIDE_STYLE('',(#3394));+#3394 = SURFACE_STYLE_FILL_AREA(#3395);+#3395 = FILL_AREA_STYLE('',(#3396));+#3396 = FILL_AREA_STYLE_COLOUR('',#3171);+#3397 = STYLED_ITEM('color',(#3398),#1824);+#3398 = PRESENTATION_STYLE_ASSIGNMENT((#3399));+#3399 = SURFACE_STYLE_USAGE(.BOTH.,#3400);+#3400 = SURFACE_SIDE_STYLE('',(#3401));+#3401 = SURFACE_STYLE_FILL_AREA(#3402);+#3402 = FILL_AREA_STYLE('',(#3403));+#3403 = FILL_AREA_STYLE_COLOUR('',#3171);+#3404 = STYLED_ITEM('color',(#3405),#1857);+#3405 = PRESENTATION_STYLE_ASSIGNMENT((#3406));+#3406 = SURFACE_STYLE_USAGE(.BOTH.,#3407);+#3407 = SURFACE_SIDE_STYLE('',(#3408));+#3408 = SURFACE_STYLE_FILL_AREA(#3409);+#3409 = FILL_AREA_STYLE('',(#3410));+#3410 = FILL_AREA_STYLE_COLOUR('',#3171);+#3411 = STYLED_ITEM('color',(#3412),#1897);+#3412 = PRESENTATION_STYLE_ASSIGNMENT((#3413));+#3413 = SURFACE_STYLE_USAGE(.BOTH.,#3414);+#3414 = SURFACE_SIDE_STYLE('',(#3415));+#3415 = SURFACE_STYLE_FILL_AREA(#3416);+#3416 = FILL_AREA_STYLE('',(#3417));+#3417 = FILL_AREA_STYLE_COLOUR('',#3171);+#3418 = STYLED_ITEM('color',(#3419),#1921);+#3419 = PRESENTATION_STYLE_ASSIGNMENT((#3420));+#3420 = SURFACE_STYLE_USAGE(.BOTH.,#3421);+#3421 = SURFACE_SIDE_STYLE('',(#3422));+#3422 = SURFACE_STYLE_FILL_AREA(#3423);+#3423 = FILL_AREA_STYLE('',(#3424));+#3424 = FILL_AREA_STYLE_COLOUR('',#3171);+#3425 = STYLED_ITEM('color',(#3426),#1961);+#3426 = PRESENTATION_STYLE_ASSIGNMENT((#3427));+#3427 = SURFACE_STYLE_USAGE(.BOTH.,#3428);+#3428 = SURFACE_SIDE_STYLE('',(#3429));+#3429 = SURFACE_STYLE_FILL_AREA(#3430);+#3430 = FILL_AREA_STYLE('',(#3431));+#3431 = FILL_AREA_STYLE_COLOUR('',#3171);+#3432 = STYLED_ITEM('color',(#3433),#1994);+#3433 = PRESENTATION_STYLE_ASSIGNMENT((#3434));+#3434 = SURFACE_STYLE_USAGE(.BOTH.,#3435);+#3435 = SURFACE_SIDE_STYLE('',(#3436));+#3436 = SURFACE_STYLE_FILL_AREA(#3437);+#3437 = FILL_AREA_STYLE('',(#3438));+#3438 = FILL_AREA_STYLE_COLOUR('',#3171);+#3439 = STYLED_ITEM('color',(#3440),#2018);+#3440 = PRESENTATION_STYLE_ASSIGNMENT((#3441));+#3441 = SURFACE_STYLE_USAGE(.BOTH.,#3442);+#3442 = SURFACE_SIDE_STYLE('',(#3443));+#3443 = SURFACE_STYLE_FILL_AREA(#3444);+#3444 = FILL_AREA_STYLE('',(#3445));+#3445 = FILL_AREA_STYLE_COLOUR('',#3171);+#3446 = STYLED_ITEM('color',(#3447),#2051);+#3447 = PRESENTATION_STYLE_ASSIGNMENT((#3448));+#3448 = SURFACE_STYLE_USAGE(.BOTH.,#3449);+#3449 = SURFACE_SIDE_STYLE('',(#3450));+#3450 = SURFACE_STYLE_FILL_AREA(#3451);+#3451 = FILL_AREA_STYLE('',(#3452));+#3452 = FILL_AREA_STYLE_COLOUR('',#3171);+#3453 = STYLED_ITEM('color',(#3454),#2091);+#3454 = PRESENTATION_STYLE_ASSIGNMENT((#3455));+#3455 = SURFACE_STYLE_USAGE(.BOTH.,#3456);+#3456 = SURFACE_SIDE_STYLE('',(#3457));+#3457 = SURFACE_STYLE_FILL_AREA(#3458);+#3458 = FILL_AREA_STYLE('',(#3459));+#3459 = FILL_AREA_STYLE_COLOUR('',#3171);+#3460 = STYLED_ITEM('color',(#3461),#2115);+#3461 = PRESENTATION_STYLE_ASSIGNMENT((#3462));+#3462 = SURFACE_STYLE_USAGE(.BOTH.,#3463);+#3463 = SURFACE_SIDE_STYLE('',(#3464));+#3464 = SURFACE_STYLE_FILL_AREA(#3465);+#3465 = FILL_AREA_STYLE('',(#3466));+#3466 = FILL_AREA_STYLE_COLOUR('',#3171);+#3467 = STYLED_ITEM('color',(#3468),#2155);+#3468 = PRESENTATION_STYLE_ASSIGNMENT((#3469));+#3469 = SURFACE_STYLE_USAGE(.BOTH.,#3470);+#3470 = SURFACE_SIDE_STYLE('',(#3471));+#3471 = SURFACE_STYLE_FILL_AREA(#3472);+#3472 = FILL_AREA_STYLE('',(#3473));+#3473 = FILL_AREA_STYLE_COLOUR('',#3171);+#3474 = STYLED_ITEM('color',(#3475),#2188);+#3475 = PRESENTATION_STYLE_ASSIGNMENT((#3476));+#3476 = SURFACE_STYLE_USAGE(.BOTH.,#3477);+#3477 = SURFACE_SIDE_STYLE('',(#3478));+#3478 = SURFACE_STYLE_FILL_AREA(#3479);+#3479 = FILL_AREA_STYLE('',(#3480));+#3480 = FILL_AREA_STYLE_COLOUR('',#3171);+#3481 = STYLED_ITEM('color',(#3482),#2212);+#3482 = PRESENTATION_STYLE_ASSIGNMENT((#3483));+#3483 = SURFACE_STYLE_USAGE(.BOTH.,#3484);+#3484 = SURFACE_SIDE_STYLE('',(#3485));+#3485 = SURFACE_STYLE_FILL_AREA(#3486);+#3486 = FILL_AREA_STYLE('',(#3487));+#3487 = FILL_AREA_STYLE_COLOUR('',#3171);+#3488 = STYLED_ITEM('color',(#3489),#2245);+#3489 = PRESENTATION_STYLE_ASSIGNMENT((#3490));+#3490 = SURFACE_STYLE_USAGE(.BOTH.,#3491);+#3491 = SURFACE_SIDE_STYLE('',(#3492));+#3492 = SURFACE_STYLE_FILL_AREA(#3493);+#3493 = FILL_AREA_STYLE('',(#3494));+#3494 = FILL_AREA_STYLE_COLOUR('',#3171);+#3495 = STYLED_ITEM('color',(#3496),#2285);+#3496 = PRESENTATION_STYLE_ASSIGNMENT((#3497));+#3497 = SURFACE_STYLE_USAGE(.BOTH.,#3498);+#3498 = SURFACE_SIDE_STYLE('',(#3499));+#3499 = SURFACE_STYLE_FILL_AREA(#3500);+#3500 = FILL_AREA_STYLE('',(#3501));+#3501 = FILL_AREA_STYLE_COLOUR('',#3171);+#3502 = STYLED_ITEM('color',(#3503),#2309);+#3503 = PRESENTATION_STYLE_ASSIGNMENT((#3504));+#3504 = SURFACE_STYLE_USAGE(.BOTH.,#3505);+#3505 = SURFACE_SIDE_STYLE('',(#3506));+#3506 = SURFACE_STYLE_FILL_AREA(#3507);+#3507 = FILL_AREA_STYLE('',(#3508));+#3508 = FILL_AREA_STYLE_COLOUR('',#3171);+#3509 = STYLED_ITEM('color',(#3510),#2349);+#3510 = PRESENTATION_STYLE_ASSIGNMENT((#3511));+#3511 = SURFACE_STYLE_USAGE(.BOTH.,#3512);+#3512 = SURFACE_SIDE_STYLE('',(#3513));+#3513 = SURFACE_STYLE_FILL_AREA(#3514);+#3514 = FILL_AREA_STYLE('',(#3515));+#3515 = FILL_AREA_STYLE_COLOUR('',#3171);+#3516 = STYLED_ITEM('color',(#3517),#2382);+#3517 = PRESENTATION_STYLE_ASSIGNMENT((#3518));+#3518 = SURFACE_STYLE_USAGE(.BOTH.,#3519);+#3519 = SURFACE_SIDE_STYLE('',(#3520));+#3520 = SURFACE_STYLE_FILL_AREA(#3521);+#3521 = FILL_AREA_STYLE('',(#3522));+#3522 = FILL_AREA_STYLE_COLOUR('',#3171);+#3523 = STYLED_ITEM('color',(#3524),#2406);+#3524 = PRESENTATION_STYLE_ASSIGNMENT((#3525));+#3525 = SURFACE_STYLE_USAGE(.BOTH.,#3526);+#3526 = SURFACE_SIDE_STYLE('',(#3527));+#3527 = SURFACE_STYLE_FILL_AREA(#3528);+#3528 = FILL_AREA_STYLE('',(#3529));+#3529 = FILL_AREA_STYLE_COLOUR('',#3171);+#3530 = STYLED_ITEM('color',(#3531),#2439);+#3531 = PRESENTATION_STYLE_ASSIGNMENT((#3532));+#3532 = SURFACE_STYLE_USAGE(.BOTH.,#3533);+#3533 = SURFACE_SIDE_STYLE('',(#3534));+#3534 = SURFACE_STYLE_FILL_AREA(#3535);+#3535 = FILL_AREA_STYLE('',(#3536));+#3536 = FILL_AREA_STYLE_COLOUR('',#3214);+#3537 = STYLED_ITEM('color',(#3538),#2456);+#3538 = PRESENTATION_STYLE_ASSIGNMENT((#3539));+#3539 = SURFACE_STYLE_USAGE(.BOTH.,#3540);+#3540 = SURFACE_SIDE_STYLE('',(#3541));+#3541 = SURFACE_STYLE_FILL_AREA(#3542);+#3542 = FILL_AREA_STYLE('',(#3543));+#3543 = FILL_AREA_STYLE_COLOUR('',#3214);+#3544 = STYLED_ITEM('color',(#3545),#2479);+#3545 = PRESENTATION_STYLE_ASSIGNMENT((#3546));+#3546 = SURFACE_STYLE_USAGE(.BOTH.,#3547);+#3547 = SURFACE_SIDE_STYLE('',(#3548));+#3548 = SURFACE_STYLE_FILL_AREA(#3549);+#3549 = FILL_AREA_STYLE('',(#3550));+#3550 = FILL_AREA_STYLE_COLOUR('',#3171);+#3551 = STYLED_ITEM('color',(#3552),#2496);+#3552 = PRESENTATION_STYLE_ASSIGNMENT((#3553));+#3553 = SURFACE_STYLE_USAGE(.BOTH.,#3554);+#3554 = SURFACE_SIDE_STYLE('',(#3555));+#3555 = SURFACE_STYLE_FILL_AREA(#3556);+#3556 = FILL_AREA_STYLE('',(#3557));+#3557 = FILL_AREA_STYLE_COLOUR('',#3171);+#3558 = STYLED_ITEM('color',(#3559),#2513);+#3559 = PRESENTATION_STYLE_ASSIGNMENT((#3560));+#3560 = SURFACE_STYLE_USAGE(.BOTH.,#3561);+#3561 = SURFACE_SIDE_STYLE('',(#3562));+#3562 = SURFACE_STYLE_FILL_AREA(#3563);+#3563 = FILL_AREA_STYLE('',(#3564));+#3564 = FILL_AREA_STYLE_COLOUR('',#3171);+#3565 = STYLED_ITEM('color',(#3566),#2530);+#3566 = PRESENTATION_STYLE_ASSIGNMENT((#3567));+#3567 = SURFACE_STYLE_USAGE(.BOTH.,#3568);+#3568 = SURFACE_SIDE_STYLE('',(#3569));+#3569 = SURFACE_STYLE_FILL_AREA(#3570);+#3570 = FILL_AREA_STYLE('',(#3571));+#3571 = FILL_AREA_STYLE_COLOUR('',#3171);+#3572 = STYLED_ITEM('color',(#3573),#2547);+#3573 = PRESENTATION_STYLE_ASSIGNMENT((#3574));+#3574 = SURFACE_STYLE_USAGE(.BOTH.,#3575);+#3575 = SURFACE_SIDE_STYLE('',(#3576));+#3576 = SURFACE_STYLE_FILL_AREA(#3577);+#3577 = FILL_AREA_STYLE('',(#3578));+#3578 = FILL_AREA_STYLE_COLOUR('',#3171);+#3579 = STYLED_ITEM('color',(#3580),#2564);+#3580 = PRESENTATION_STYLE_ASSIGNMENT((#3581));+#3581 = SURFACE_STYLE_USAGE(.BOTH.,#3582);+#3582 = SURFACE_SIDE_STYLE('',(#3583));+#3583 = SURFACE_STYLE_FILL_AREA(#3584);+#3584 = FILL_AREA_STYLE('',(#3585));+#3585 = FILL_AREA_STYLE_COLOUR('',#3171);+#3586 = STYLED_ITEM('color',(#3587),#2581);+#3587 = PRESENTATION_STYLE_ASSIGNMENT((#3588));+#3588 = SURFACE_STYLE_USAGE(.BOTH.,#3589);+#3589 = SURFACE_SIDE_STYLE('',(#3590));+#3590 = SURFACE_STYLE_FILL_AREA(#3591);+#3591 = FILL_AREA_STYLE('',(#3592));+#3592 = FILL_AREA_STYLE_COLOUR('',#3171);+#3593 = STYLED_ITEM('color',(#3594),#2598);+#3594 = PRESENTATION_STYLE_ASSIGNMENT((#3595));+#3595 = SURFACE_STYLE_USAGE(.BOTH.,#3596);+#3596 = SURFACE_SIDE_STYLE('',(#3597));+#3597 = SURFACE_STYLE_FILL_AREA(#3598);+#3598 = FILL_AREA_STYLE('',(#3599));+#3599 = FILL_AREA_STYLE_COLOUR('',#3171);+#3600 = STYLED_ITEM('color',(#3601),#2615);+#3601 = PRESENTATION_STYLE_ASSIGNMENT((#3602));+#3602 = SURFACE_STYLE_USAGE(.BOTH.,#3603);+#3603 = SURFACE_SIDE_STYLE('',(#3604));+#3604 = SURFACE_STYLE_FILL_AREA(#3605);+#3605 = FILL_AREA_STYLE('',(#3606));+#3606 = FILL_AREA_STYLE_COLOUR('',#3171);+#3607 = STYLED_ITEM('color',(#3608),#2627);+#3608 = PRESENTATION_STYLE_ASSIGNMENT((#3609));+#3609 = SURFACE_STYLE_USAGE(.BOTH.,#3610);+#3610 = SURFACE_SIDE_STYLE('',(#3611));+#3611 = SURFACE_STYLE_FILL_AREA(#3612);+#3612 = FILL_AREA_STYLE('',(#3613));+#3613 = FILL_AREA_STYLE_COLOUR('',#3171);+#3614 = STYLED_ITEM('color',(#3615),#2644);+#3615 = PRESENTATION_STYLE_ASSIGNMENT((#3616));+#3616 = SURFACE_STYLE_USAGE(.BOTH.,#3617);+#3617 = SURFACE_SIDE_STYLE('',(#3618));+#3618 = SURFACE_STYLE_FILL_AREA(#3619);+#3619 = FILL_AREA_STYLE('',(#3620));+#3620 = FILL_AREA_STYLE_COLOUR('',#3171);+#3621 = STYLED_ITEM('color',(#3622),#2661);+#3622 = PRESENTATION_STYLE_ASSIGNMENT((#3623));+#3623 = SURFACE_STYLE_USAGE(.BOTH.,#3624);+#3624 = SURFACE_SIDE_STYLE('',(#3625));+#3625 = SURFACE_STYLE_FILL_AREA(#3626);+#3626 = FILL_AREA_STYLE('',(#3627));+#3627 = FILL_AREA_STYLE_COLOUR('',#3171);+#3628 = STYLED_ITEM('color',(#3629),#2678);+#3629 = PRESENTATION_STYLE_ASSIGNMENT((#3630));+#3630 = SURFACE_STYLE_USAGE(.BOTH.,#3631);+#3631 = SURFACE_SIDE_STYLE('',(#3632));+#3632 = SURFACE_STYLE_FILL_AREA(#3633);+#3633 = FILL_AREA_STYLE('',(#3634));+#3634 = FILL_AREA_STYLE_COLOUR('',#3171);+#3635 = STYLED_ITEM('color',(#3636),#2695);+#3636 = PRESENTATION_STYLE_ASSIGNMENT((#3637));+#3637 = SURFACE_STYLE_USAGE(.BOTH.,#3638);+#3638 = SURFACE_SIDE_STYLE('',(#3639));+#3639 = SURFACE_STYLE_FILL_AREA(#3640);+#3640 = FILL_AREA_STYLE('',(#3641));+#3641 = FILL_AREA_STYLE_COLOUR('',#3171);+#3642 = STYLED_ITEM('color',(#3643),#2712);+#3643 = PRESENTATION_STYLE_ASSIGNMENT((#3644));+#3644 = SURFACE_STYLE_USAGE(.BOTH.,#3645);+#3645 = SURFACE_SIDE_STYLE('',(#3646));+#3646 = SURFACE_STYLE_FILL_AREA(#3647);+#3647 = FILL_AREA_STYLE('',(#3648));+#3648 = FILL_AREA_STYLE_COLOUR('',#3171);+#3649 = STYLED_ITEM('color',(#3650),#2729);+#3650 = PRESENTATION_STYLE_ASSIGNMENT((#3651));+#3651 = SURFACE_STYLE_USAGE(.BOTH.,#3652);+#3652 = SURFACE_SIDE_STYLE('',(#3653));+#3653 = SURFACE_STYLE_FILL_AREA(#3654);+#3654 = FILL_AREA_STYLE('',(#3655));+#3655 = FILL_AREA_STYLE_COLOUR('',#3171);+#3656 = STYLED_ITEM('color',(#3657),#2746);+#3657 = PRESENTATION_STYLE_ASSIGNMENT((#3658));+#3658 = SURFACE_STYLE_USAGE(.BOTH.,#3659);+#3659 = SURFACE_SIDE_STYLE('',(#3660));+#3660 = SURFACE_STYLE_FILL_AREA(#3661);+#3661 = FILL_AREA_STYLE('',(#3662));+#3662 = FILL_AREA_STYLE_COLOUR('',#3171);+#3663 = STYLED_ITEM('color',(#3664),#2763);+#3664 = PRESENTATION_STYLE_ASSIGNMENT((#3665));+#3665 = SURFACE_STYLE_USAGE(.BOTH.,#3666);+#3666 = SURFACE_SIDE_STYLE('',(#3667));+#3667 = SURFACE_STYLE_FILL_AREA(#3668);+#3668 = FILL_AREA_STYLE('',(#3669));+#3669 = FILL_AREA_STYLE_COLOUR('',#3171);+#3670 = STYLED_ITEM('color',(#3671),#2775);+#3671 = PRESENTATION_STYLE_ASSIGNMENT((#3672));+#3672 = SURFACE_STYLE_USAGE(.BOTH.,#3673);+#3673 = SURFACE_SIDE_STYLE('',(#3674));+#3674 = SURFACE_STYLE_FILL_AREA(#3675);+#3675 = FILL_AREA_STYLE('',(#3676));+#3676 = FILL_AREA_STYLE_COLOUR('',#3171);+#3677 = STYLED_ITEM('color',(#3678),#2792);+#3678 = PRESENTATION_STYLE_ASSIGNMENT((#3679));+#3679 = SURFACE_STYLE_USAGE(.BOTH.,#3680);+#3680 = SURFACE_SIDE_STYLE('',(#3681));+#3681 = SURFACE_STYLE_FILL_AREA(#3682);+#3682 = FILL_AREA_STYLE('',(#3683));+#3683 = FILL_AREA_STYLE_COLOUR('',#3171);+#3684 = STYLED_ITEM('color',(#3685),#2804);+#3685 = PRESENTATION_STYLE_ASSIGNMENT((#3686));+#3686 = SURFACE_STYLE_USAGE(.BOTH.,#3687);+#3687 = SURFACE_SIDE_STYLE('',(#3688));+#3688 = SURFACE_STYLE_FILL_AREA(#3689);+#3689 = FILL_AREA_STYLE('',(#3690));+#3690 = FILL_AREA_STYLE_COLOUR('',#3171);+#3691 = STYLED_ITEM('color',(#3692),#2821);+#3692 = PRESENTATION_STYLE_ASSIGNMENT((#3693));+#3693 = SURFACE_STYLE_USAGE(.BOTH.,#3694);+#3694 = SURFACE_SIDE_STYLE('',(#3695));+#3695 = SURFACE_STYLE_FILL_AREA(#3696);+#3696 = FILL_AREA_STYLE('',(#3697));+#3697 = FILL_AREA_STYLE_COLOUR('',#3171);+#3698 = STYLED_ITEM('color',(#3699),#2833);+#3699 = PRESENTATION_STYLE_ASSIGNMENT((#3700));+#3700 = SURFACE_STYLE_USAGE(.BOTH.,#3701);+#3701 = SURFACE_SIDE_STYLE('',(#3702));+#3702 = SURFACE_STYLE_FILL_AREA(#3703);+#3703 = FILL_AREA_STYLE('',(#3704));+#3704 = FILL_AREA_STYLE_COLOUR('',#3171);+#3705 = STYLED_ITEM('color',(#3706),#2850);+#3706 = PRESENTATION_STYLE_ASSIGNMENT((#3707));+#3707 = SURFACE_STYLE_USAGE(.BOTH.,#3708);+#3708 = SURFACE_SIDE_STYLE('',(#3709));+#3709 = SURFACE_STYLE_FILL_AREA(#3710);+#3710 = FILL_AREA_STYLE('',(#3711));+#3711 = FILL_AREA_STYLE_COLOUR('',#3171);+#3712 = STYLED_ITEM('color',(#3713),#2862);+#3713 = PRESENTATION_STYLE_ASSIGNMENT((#3714));+#3714 = SURFACE_STYLE_USAGE(.BOTH.,#3715);+#3715 = SURFACE_SIDE_STYLE('',(#3716));+#3716 = SURFACE_STYLE_FILL_AREA(#3717);+#3717 = FILL_AREA_STYLE('',(#3718));+#3718 = FILL_AREA_STYLE_COLOUR('',#3171);+#3719 = STYLED_ITEM('color',(#3720),#2879);+#3720 = PRESENTATION_STYLE_ASSIGNMENT((#3721));+#3721 = SURFACE_STYLE_USAGE(.BOTH.,#3722);+#3722 = SURFACE_SIDE_STYLE('',(#3723));+#3723 = SURFACE_STYLE_FILL_AREA(#3724);+#3724 = FILL_AREA_STYLE('',(#3725));+#3725 = FILL_AREA_STYLE_COLOUR('',#3171);+#3726 = STYLED_ITEM('color',(#3727),#2891);+#3727 = PRESENTATION_STYLE_ASSIGNMENT((#3728));+#3728 = SURFACE_STYLE_USAGE(.BOTH.,#3729);+#3729 = SURFACE_SIDE_STYLE('',(#3730));+#3730 = SURFACE_STYLE_FILL_AREA(#3731);+#3731 = FILL_AREA_STYLE('',(#3732));+#3732 = FILL_AREA_STYLE_COLOUR('',#3171);+#3733 = STYLED_ITEM('color',(#3734),#2908);+#3734 = PRESENTATION_STYLE_ASSIGNMENT((#3735));+#3735 = SURFACE_STYLE_USAGE(.BOTH.,#3736);+#3736 = SURFACE_SIDE_STYLE('',(#3737));+#3737 = SURFACE_STYLE_FILL_AREA(#3738);+#3738 = FILL_AREA_STYLE('',(#3739));+#3739 = FILL_AREA_STYLE_COLOUR('',#3171);+#3740 = STYLED_ITEM('color',(#3741),#2920);+#3741 = PRESENTATION_STYLE_ASSIGNMENT((#3742));+#3742 = SURFACE_STYLE_USAGE(.BOTH.,#3743);+#3743 = SURFACE_SIDE_STYLE('',(#3744));+#3744 = SURFACE_STYLE_FILL_AREA(#3745);+#3745 = FILL_AREA_STYLE('',(#3746));+#3746 = FILL_AREA_STYLE_COLOUR('',#3171);+#3747 = STYLED_ITEM('color',(#3748),#2937);+#3748 = PRESENTATION_STYLE_ASSIGNMENT((#3749));+#3749 = SURFACE_STYLE_USAGE(.BOTH.,#3750);+#3750 = SURFACE_SIDE_STYLE('',(#3751));+#3751 = SURFACE_STYLE_FILL_AREA(#3752);+#3752 = FILL_AREA_STYLE('',(#3753));+#3753 = FILL_AREA_STYLE_COLOUR('',#3171);+#3754 = STYLED_ITEM('color',(#3755),#2949);+#3755 = PRESENTATION_STYLE_ASSIGNMENT((#3756));+#3756 = SURFACE_STYLE_USAGE(.BOTH.,#3757);+#3757 = SURFACE_SIDE_STYLE('',(#3758));+#3758 = SURFACE_STYLE_FILL_AREA(#3759);+#3759 = FILL_AREA_STYLE('',(#3760));+#3760 = FILL_AREA_STYLE_COLOUR('',#3171);+#3761 = STYLED_ITEM('color',(#3762),#2966);+#3762 = PRESENTATION_STYLE_ASSIGNMENT((#3763));+#3763 = SURFACE_STYLE_USAGE(.BOTH.,#3764);+#3764 = SURFACE_SIDE_STYLE('',(#3765));+#3765 = SURFACE_STYLE_FILL_AREA(#3766);+#3766 = FILL_AREA_STYLE('',(#3767));+#3767 = FILL_AREA_STYLE_COLOUR('',#3171);+#3768 = STYLED_ITEM('color',(#3769),#2978);+#3769 = PRESENTATION_STYLE_ASSIGNMENT((#3770));+#3770 = SURFACE_STYLE_USAGE(.BOTH.,#3771);+#3771 = SURFACE_SIDE_STYLE('',(#3772));+#3772 = SURFACE_STYLE_FILL_AREA(#3773);+#3773 = FILL_AREA_STYLE('',(#3774));+#3774 = FILL_AREA_STYLE_COLOUR('',#3171);+#3775 = STYLED_ITEM('color',(#3776),#2995);+#3776 = PRESENTATION_STYLE_ASSIGNMENT((#3777));+#3777 = SURFACE_STYLE_USAGE(.BOTH.,#3778);+#3778 = SURFACE_SIDE_STYLE('',(#3779));+#3779 = SURFACE_STYLE_FILL_AREA(#3780);+#3780 = FILL_AREA_STYLE('',(#3781));+#3781 = FILL_AREA_STYLE_COLOUR('',#3171);+#3782 = STYLED_ITEM('color',(#3783),#3007);+#3783 = PRESENTATION_STYLE_ASSIGNMENT((#3784));+#3784 = SURFACE_STYLE_USAGE(.BOTH.,#3785);+#3785 = SURFACE_SIDE_STYLE('',(#3786));+#3786 = SURFACE_STYLE_FILL_AREA(#3787);+#3787 = FILL_AREA_STYLE('',(#3788));+#3788 = FILL_AREA_STYLE_COLOUR('',#3171);+#3789 = STYLED_ITEM('color',(#3790),#3024);+#3790 = PRESENTATION_STYLE_ASSIGNMENT((#3791));+#3791 = SURFACE_STYLE_USAGE(.BOTH.,#3792);+#3792 = SURFACE_SIDE_STYLE('',(#3793));+#3793 = SURFACE_STYLE_FILL_AREA(#3794);+#3794 = FILL_AREA_STYLE('',(#3795));+#3795 = FILL_AREA_STYLE_COLOUR('',#3171);+#3796 = STYLED_ITEM('color',(#3797),#3036);+#3797 = PRESENTATION_STYLE_ASSIGNMENT((#3798));+#3798 = SURFACE_STYLE_USAGE(.BOTH.,#3799);+#3799 = SURFACE_SIDE_STYLE('',(#3800));+#3800 = SURFACE_STYLE_FILL_AREA(#3801);+#3801 = FILL_AREA_STYLE('',(#3802));+#3802 = FILL_AREA_STYLE_COLOUR('',#3171);+#3803 = STYLED_ITEM('color',(#3804),#3053);+#3804 = PRESENTATION_STYLE_ASSIGNMENT((#3805));+#3805 = SURFACE_STYLE_USAGE(.BOTH.,#3806);+#3806 = SURFACE_SIDE_STYLE('',(#3807));+#3807 = SURFACE_STYLE_FILL_AREA(#3808);+#3808 = FILL_AREA_STYLE('',(#3809));+#3809 = FILL_AREA_STYLE_COLOUR('',#3171);+#3810 = STYLED_ITEM('color',(#3811),#3065);+#3811 = PRESENTATION_STYLE_ASSIGNMENT((#3812));+#3812 = SURFACE_STYLE_USAGE(.BOTH.,#3813);+#3813 = SURFACE_SIDE_STYLE('',(#3814));+#3814 = SURFACE_STYLE_FILL_AREA(#3815);+#3815 = FILL_AREA_STYLE('',(#3816));+#3816 = FILL_AREA_STYLE_COLOUR('',#3171);+#3817 = STYLED_ITEM('color',(#3818),#3082);+#3818 = PRESENTATION_STYLE_ASSIGNMENT((#3819));+#3819 = SURFACE_STYLE_USAGE(.BOTH.,#3820);+#3820 = SURFACE_SIDE_STYLE('',(#3821));+#3821 = SURFACE_STYLE_FILL_AREA(#3822);+#3822 = FILL_AREA_STYLE('',(#3823));+#3823 = FILL_AREA_STYLE_COLOUR('',#3171);+#3824 = STYLED_ITEM('color',(#3825),#3094);+#3825 = PRESENTATION_STYLE_ASSIGNMENT((#3826));+#3826 = SURFACE_STYLE_USAGE(.BOTH.,#3827);+#3827 = SURFACE_SIDE_STYLE('',(#3828));+#3828 = SURFACE_STYLE_FILL_AREA(#3829);+#3829 = FILL_AREA_STYLE('',(#3830));+#3830 = FILL_AREA_STYLE_COLOUR('',#3171);+#3831 = STYLED_ITEM('color',(#3832),#3111);+#3832 = PRESENTATION_STYLE_ASSIGNMENT((#3833));+#3833 = SURFACE_STYLE_USAGE(.BOTH.,#3834);+#3834 = SURFACE_SIDE_STYLE('',(#3835));+#3835 = SURFACE_STYLE_FILL_AREA(#3836);+#3836 = FILL_AREA_STYLE('',(#3837));+#3837 = FILL_AREA_STYLE_COLOUR('',#3171);+#3838 = STYLED_ITEM('color',(#3839),#3123);+#3839 = PRESENTATION_STYLE_ASSIGNMENT((#3840));+#3840 = SURFACE_STYLE_USAGE(.BOTH.,#3841);+#3841 = SURFACE_SIDE_STYLE('',(#3842));+#3842 = SURFACE_STYLE_FILL_AREA(#3843);+#3843 = FILL_AREA_STYLE('',(#3844));+#3844 = FILL_AREA_STYLE_COLOUR('',#3845);+#3845 = COLOUR_RGB('',0.690999984741,0.663999974728,0.597999989986);+#3846 = STYLED_ITEM('color',(#3847),#3148);+#3847 = PRESENTATION_STYLE_ASSIGNMENT((#3848));+#3848 = SURFACE_STYLE_USAGE(.BOTH.,#3849);+#3849 = SURFACE_SIDE_STYLE('',(#3850));+#3850 = SURFACE_STYLE_FILL_AREA(#3851);+#3851 = FILL_AREA_STYLE('',(#3852));+#3852 = FILL_AREA_STYLE_COLOUR('',#3845);+ENDSEC;+END-ISO-10303-21;
package.jsonadded+238@@ -0,0 +1,238 @@+{+ "slug": "max17205g-t",+ "version": "0.1.0",+ "type": "component",+ "description": "Analog Devices Inc Maxim Integrated Battery Management, TDFN-14-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "max17205g+t",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "max17205g-t.kicad_sym",+ "max17205g-t.kicad_mod",+ "max17205g-t.glb",+ "max17205g-t.step",+ "max17205g-t.lbr",+ "docs/hero.png",+ "docs/max17205g-t-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "max17205g-t-hero.glb",+ "max17205g-t-hero.overlay.json",+ "max17205g-t-etched.glb"+ ],+ "component": {+ "mpn": "MAX17205G+T",+ "manufacturer": "Analog Devices Inc Maxim Integrated",+ "package": "TDFN-14-EP(3x3)",+ "pin_count": 15,+ "category": "Power Management (PMIC)",+ "subcategory": "Battery Management",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588912115415048192",+ "parts": {+ "symbol": "max17205g-t.kicad_sym",+ "footprint": "max17205g-t.kicad_mod",+ "model_3d": "max17205g-t-hero.glb",+ "model_3d_plain": "max17205g-t-etched.glb",+ "model_3d_step": "max17205g-t-etched.step",+ "model_3d_step_plain": "max17205g-t.step",+ "lbr": "max17205g-t.lbr"+ },+ "distributor_links": {+ "lcsc": "C401140",+ "digikey": "MAX17205G+TTR-ND",+ "mouser": "700-MAX17205G+T"+ },+ "distributor_check": {+ "checked_at": "2026-10-20T22:39:36Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "MAX17205G+TTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "700-MAX17205G+T",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "REG3",+ "type": "power_out",+ "description": "Internal 3.4V regulator output that must be bypassed with an external 0.47µF capacitor on the MAX17205 (connect REG3 to VBATT on the MAX17201)."+ },+ {+ "number": "2",+ "name": "CSP",+ "type": "input",+ "description": "Current measurement positive sense point that must be Kelvin-connected to the cell side of the sense resistor."+ },+ {+ "number": "3",+ "name": "REG2",+ "type": "power_out",+ "description": "Internal 1.8V regulator output that must be bypassed with an external 0.47µF capacitor to CSN, with REG2 to CSN rated -0.3V to +2.2V."+ },+ {+ "number": "4",+ "name": "CSN",+ "type": "power_in",+ "description": "Device ground and current measurement negative sense point that must be Kelvin-connected to the load side of the sense resistor."+ },+ {+ "number": "5",+ "name": "VBATT",+ "type": "power_in",+ "description": "Power-supply and battery voltage sense input connected to the positive terminal of the cell stack, bypassed with an RC filter to CSN."+ },+ {+ "number": "6",+ "name": "CELL2",+ "type": "input",+ "description": "Voltage sense input for the second or middle cell, where its series resistance sets the balancing current and it also serves as the external divider gate drive for CELLx pack measurement."+ },+ {+ "number": "7",+ "name": "CELL1",+ "type": "input",+ "description": "Voltage sense input for the bottom cell, where its series resistance sets the balancing current."+ },+ {+ "number": "8",+ "name": "ALRT1",+ "type": "output",+ "description": "Programmable open-drain alert output that requires an external pullup to generate a logic-high, with a continuous sink current limit of 20mA."+ },+ {+ "number": "9",+ "name": "AIN1",+ "type": "input",+ "description": "Auxiliary voltage input 1 that receives the voltage from the external thermal-measurement network."+ },+ {+ "number": "10",+ "name": "AIN2",+ "type": "input",+ "description": "Auxiliary voltage input 2 that receives the voltage from the external thermal-measurement network."+ },+ {+ "number": "11",+ "name": "OD/SCL",+ "type": "input",+ "description": "Input-only pin that serves as the I2C serial clock or the 1-Wire speed selection, with an internal pulldown used to sense pack disconnection."+ },+ {+ "number": "12",+ "name": "DQ/SDA",+ "type": "bidirectional",+ "description": "Serial data input/output for both 1-Wire and I2C modes using an open-drain driver, with an internal pulldown used to sense pack disconnection and a continuous sink current limit of 20mA."+ },+ {+ "number": "13",+ "name": "CELLx",+ "type": "input",+ "description": "High-impedance voltage measurement channel that connects to an external voltage divider for measuring cell stacks larger than 4S."+ },+ {+ "number": "14",+ "name": "THRM",+ "type": "output",+ "description": "Thermistor bias connection to the high side of the thermistor divider, biased to the REG3 voltage during AIN1 and AIN2 measurement, with a continuous source current limit of 20mA."+ },+ {+ "number": "15",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The exposed pad is not a numbered pin; it is listed as 'EP' in the pin table and is included here as; The pin table does not give a KiCad electrical type. Types for REG3 (power_out), ALRT1 (output, open; The pin table describes REG3 differently for the MAX17205 (external 0.47µF bypass) and the MAX17201 ",+ "exposed pad 15 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 17,+ "cost_usd": 0.1244,+ "at": "2026-10-20T22:37:06"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588912115415048192",+ "pages": 115,+ "sha256": "7a77e041ceb5fd46",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 15,+ "described": 15,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "max17205g-t.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.0,+ 2.98,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "87c79f888fa130ae597ee6cd19fcfec832fd9fd8c7b5adaac3852b90e528964c",+ "checked": "2026-10-20",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "max17205g-t-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.0,+ 2.98,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "a2f7e15308cf6538a2dca7c21cfc3735489ec46490c7bbb3c7819eb7587d881a",+ "checked": "2026-10-20",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+244@@ -0,0 +1,244 @@+{+ "slug": "max17205g-t",+ "version": "0.1.0",+ "type": "component",+ "description": "Analog Devices Inc Maxim Integrated Battery Management, TDFN-14-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "max17205g+t",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "max17205g-t.kicad_sym",+ "max17205g-t.kicad_mod",+ "max17205g-t.glb",+ "max17205g-t.step",+ "max17205g-t.lbr",+ "docs/hero.png",+ "docs/max17205g-t-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "max17205g-t-hero.glb",+ "max17205g-t-hero.overlay.json",+ "max17205g-t-etched.glb"+ ],+ "component": {+ "mpn": "MAX17205G+T",+ "manufacturer": "Analog Devices Inc Maxim Integrated",+ "package": "TDFN-14-EP(3x3)",+ "pin_count": 15,+ "category": "Power Management (PMIC)",+ "subcategory": "Battery Management",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588912115415048192",+ "parts": {+ "symbol": "max17205g-t.kicad_sym",+ "footprint": "max17205g-t.kicad_mod",+ "model_3d": "max17205g-t-hero.glb",+ "model_3d_plain": "max17205g-t-etched.glb",+ "model_3d_step": "max17205g-t-etched.step",+ "model_3d_step_plain": "max17205g-t.step",+ "lbr": "max17205g-t.lbr"+ },+ "distributor_links": {+ "lcsc": "C401140",+ "digikey": "MAX17205G+TTR-ND",+ "mouser": "700-MAX17205G+T"+ },+ "distributor_check": {+ "checked_at": "2026-10-20T22:39:36Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "MAX17205G+TTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "700-MAX17205G+T",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "REG3",+ "type": "power_out",+ "description": "Internal 3.4V regulator output that must be bypassed with an external 0.47µF capacitor on the MAX17205 (connect REG3 to VBATT on the MAX17201)."+ },+ {+ "number": "2",+ "name": "CSP",+ "type": "input",+ "description": "Current measurement positive sense point that must be Kelvin-connected to the cell side of the sense resistor."+ },+ {+ "number": "3",+ "name": "REG2",+ "type": "power_out",+ "description": "Internal 1.8V regulator output that must be bypassed with an external 0.47µF capacitor to CSN, with REG2 to CSN rated -0.3V to +2.2V."+ },+ {+ "number": "4",+ "name": "CSN",+ "type": "power_in",+ "description": "Device ground and current measurement negative sense point that must be Kelvin-connected to the load side of the sense resistor."+ },+ {+ "number": "5",+ "name": "VBATT",+ "type": "power_in",+ "description": "Power-supply and battery voltage sense input connected to the positive terminal of the cell stack, bypassed with an RC filter to CSN."+ },+ {+ "number": "6",+ "name": "CELL2",+ "type": "input",+ "description": "Voltage sense input for the second or middle cell, where its series resistance sets the balancing current and it also serves as the external divider gate drive for CELLx pack measurement."+ },+ {+ "number": "7",+ "name": "CELL1",+ "type": "input",+ "description": "Voltage sense input for the bottom cell, where its series resistance sets the balancing current."+ },+ {+ "number": "8",+ "name": "ALRT1",+ "type": "output",+ "description": "Programmable open-drain alert output that requires an external pullup to generate a logic-high, with a continuous sink current limit of 20mA."+ },+ {+ "number": "9",+ "name": "AIN1",+ "type": "input",+ "description": "Auxiliary voltage input 1 that receives the voltage from the external thermal-measurement network."+ },+ {+ "number": "10",+ "name": "AIN2",+ "type": "input",+ "description": "Auxiliary voltage input 2 that receives the voltage from the external thermal-measurement network."+ },+ {+ "number": "11",+ "name": "OD/SCL",+ "type": "input",+ "description": "Input-only pin that serves as the I2C serial clock or the 1-Wire speed selection, with an internal pulldown used to sense pack disconnection."+ },+ {+ "number": "12",+ "name": "DQ/SDA",+ "type": "bidirectional",+ "description": "Serial data input/output for both 1-Wire and I2C modes using an open-drain driver, with an internal pulldown used to sense pack disconnection and a continuous sink current limit of 20mA."+ },+ {+ "number": "13",+ "name": "CELLx",+ "type": "input",+ "description": "High-impedance voltage measurement channel that connects to an external voltage divider for measuring cell stacks larger than 4S."+ },+ {+ "number": "14",+ "name": "THRM",+ "type": "output",+ "description": "Thermistor bias connection to the high side of the thermistor divider, biased to the REG3 voltage during AIN1 and AIN2 measurement, with a continuous source current limit of 20mA."+ },+ {+ "number": "15",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The exposed pad is not a numbered pin; it is listed as 'EP' in the pin table and is included here as; The pin table does not give a KiCad electrical type. Types for REG3 (power_out), ALRT1 (output, open; The pin table describes REG3 differently for the MAX17205 (external 0.47µF bypass) and the MAX17201 ",+ "exposed pad 15 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 17,+ "cost_usd": 0.1244,+ "at": "2026-10-20T22:37:06"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588912115415048192",+ "pages": 115,+ "sha256": "7a77e041ceb5fd46",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 15,+ "described": 15,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "max17205g-t.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 2.98,+ 0.77+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "87c79f888fa130ae597ee6cd19fcfec832fd9fd8c7b5adaac3852b90e528964c",+ "checked": "2026-10-20",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "max17205g-t-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 2.98,+ 0.77+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "a2f7e15308cf6538a2dca7c21cfc3735489ec46490c7bbb3c7819eb7587d881a",+ "checked": "2026-10-20",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>max17205g-t</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>max17205g-t</title>