MachineContactMedium - Medium Machine Contact

@@ -33,8 +33,11 @@ set by the contact) and is quoted at an **80% derating** for margin. The mating ## Mounting: press-fit into a plated through-hole  The contact presses into a **Ø0.78 mm plated through-hole** ringed by a **Ø1.30 mm** copper-annular pad. It is a solderless press-fit; solder-assist is available via the 300um jet-paste on the annular ring. The hole must be plated and fabricated to the drill spec below.+annular pad. It is a solderless press-fit; solder-assist is available via the ring of 300um+jet-paste solder balls on the annular ring (Adom's+[solder-ball-layer standard](https://wiki.adom.inc/john/adom-solder-ball-layer-standard),+shown in the 3D view above, which also animates the press-fit insertion). The hole must be+plated and fabricated to the drill spec below.  ## Dimensions 

@@ -4,7 +4,7 @@   "slug": "machinecontactmedium",   "title": "MachineContactMedium",   "brief": "Adom Medium press-fit machine pin contact (Ø0.78 hole / Ø1.30 ring, ~6.4 A)",-  "version": "1.1.14",+  "version": "1.1.15",   "tags": [     "adom",     "adom-modular",