← Commit history

Initial commit: component/m95m01-rmn6p

Ray ·d4496d98fd ·
2 files changed +185
README.mdadded+44
@@ -0,0 +1,44 @@+# M95M01-RMN6P++**STMicroelectronics** · EEPROM · SO-8++M95M01-RMN6P from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | S | input | Chip Select (S) input signal; when driven low, the device is selected and enters Active Power mode; when high, the device is deselected and enters Standby Power mode unless an internal Write cycle is in progress. |+| 2 | Q | output | Serial Data Output (Q) signal used to transfer data serially out of the device; data is shifted out on the falling edge of Serial Clock (C); output is high impedance when device is deselected or in Hold condition. |+| 3 | W | input | Write Protect (W) input signal; freezes the size of the memory area protected against Write instructions as defined by Block Protect (BP1, BP0) bits; must be driven high or low and remain stable during all Write instructions. |+| 4 | VSS | power_in | Ground reference (VSS) for all signals, including the VCC supply voltage; provides 0 V reference potential for all logic operations. |+| 5 | D | input | Serial Data Input (D) signal used to transfer data serially into the device (instructions, addresses, and data to be written); values are latched on the rising edge of Serial Clock (C). |+| 6 | C | input | Serial Clock (C) input signal providing timing for the serial interface; instructions, addresses, or data at Serial Data Input (D) are latched on the rising edge; data on Serial Data Output (Q) changes from the falling edge. |+| 7 | HOLD | input | Hold (HOLD) input signal used to pause any serial communications with the device without deselecting it; when driven low with Chip Select S low, Serial Data Output (Q) enters high impedance and Serial Data Input (D) and Serial Clock (C) become Don't Care. |+| 8 | VCC | power_in | Supply voltage (VCC) for the device; operating range 1.8 V to 5.5 V for M95M01-R (1.7 V to 5.5 V for M95M01-DF); must be held stable and within specified range during all operations. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SO-8 |+| Category | Memory |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `M95M01-RMN6P`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SO-8 (KiCad packages3D, STEP)+- 3D model files: `m95m01-rmn6p-etched.step` / `m95m01-rmn6p-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m95m01-rmn6p.step` / `m95m01-rmn6p.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589014427962523648) (53 pp, sha256 `323ad6b5a1d5fe41`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/m95m01-rmn6p-datasheet.pdf)
page.jsonadded+141
@@ -0,0 +1,141 @@+{+  "slug": "m95m01-rmn6p",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics EEPROM, SO-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "m95m01-rmn6p",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "m95m01-rmn6p.kicad_sym",+    "m95m01-rmn6p.kicad_mod",+    "m95m01-rmn6p.glb",+    "m95m01-rmn6p.step",+    "m95m01-rmn6p.lbr",+    "docs/hero.png",+    "docs/m95m01-rmn6p-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "M95M01-RMN6P",+    "manufacturer": "STMicroelectronics",+    "package": "SO-8",+    "pin_count": 8,+    "category": "Memory",+    "subcategory": "EEPROM",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589014427962523648",+    "parts": {+      "symbol": "m95m01-rmn6p.kicad_sym",+      "footprint": "m95m01-rmn6p.kicad_mod",+      "model_3d": "m95m01-rmn6p-etched.glb",+      "model_3d_plain": "m95m01-rmn6p.glb",+      "model_3d_step": "m95m01-rmn6p-etched.step",+      "model_3d_step_plain": "m95m01-rmn6p.step",+      "lbr": "m95m01-rmn6p.lbr"+    },+    "distributor_links": {+      "lcsc": "C1349274"+    },+    "pins": [+      {+        "number": "1",+        "name": "S",+        "type": "input",+        "description": "Chip Select (S) input signal; when driven low, the device is selected and enters Active Power mode; when high, the device is deselected and enters Standby Power mode unless an internal Write cycle is in progress."+      },+      {+        "number": "2",+        "name": "Q",+        "type": "output",+        "description": "Serial Data Output (Q) signal used to transfer data serially out of the device; data is shifted out on the falling edge of Serial Clock (C); output is high impedance when device is deselected or in Hold condition."+      },+      {+        "number": "3",+        "name": "W",+        "type": "input",+        "description": "Write Protect (W) input signal; freezes the size of the memory area protected against Write instructions as defined by Block Protect (BP1, BP0) bits; must be driven high or low and remain stable during all Write instructions."+      },+      {+        "number": "4",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference (VSS) for all signals, including the VCC supply voltage; provides 0 V reference potential for all logic operations."+      },+      {+        "number": "5",+        "name": "D",+        "type": "input",+        "description": "Serial Data Input (D) signal used to transfer data serially into the device (instructions, addresses, and data to be written); values are latched on the rising edge of Serial Clock (C)."+      },+      {+        "number": "6",+        "name": "C",+        "type": "input",+        "description": "Serial Clock (C) input signal providing timing for the serial interface; instructions, addresses, or data at Serial Data Input (D) are latched on the rising edge; data on Serial Data Output (Q) changes from the falling edge."+      },+      {+        "number": "7",+        "name": "HOLD",+        "type": "input",+        "description": "Hold (HOLD) input signal used to pause any serial communications with the device without deselecting it; when driven low with Chip Select S low, Serial Data Output (Q) enters high impedance and Serial Data Input (D) and Serial Clock (C) become Don't Care."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage (VCC) for the device; operating range 1.8 V to 5.5 V for M95M01-R (1.7 V to 5.5 V for M95M01-DF); must be held stable and within specified range during all operations."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 53,+        "cost_usd": 0.3937,+        "at": "2026-09-23T10:22:29"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589014427962523648",+        "pages": 53,+        "sha256": "323ad6b5a1d5fe41",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file