component
M95M01-DFDW6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# M95M01-DFDW6TP++**STMicroelectronics** · EEPROM · TSSOP-8++M95M01-DFDW6TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | S | input | Active-low Chip Select: high deselects the device and puts Q in high impedance (Standby mode), low selects it (Active mode); a falling edge is required after power-up before any instruction. |+| 2 | Q | output | Serial Data Output: data is shifted out on the falling edge of Serial Clock C, and the pin is high impedance when deselected or in the Hold condition. |+| 3 | W | input | Write Protect: freezes the size of the memory area protected by the BP1/BP0 bits and must be driven high or low and be stable during all Write instructions. |+| 4 | VSS | power_in | Ground, the reference for all signals including the VCC supply voltage. |+| 5 | D | input | Serial Data Input: receives instructions, addresses and data to be written, latched on the rising edge of Serial Clock C. |+| 6 | C | input | Serial Clock: provides the timing of the serial interface, with inputs latched on the rising edge and Q changing from the falling edge; up to 16 MHz. |+| 7 | HOLD | input | Hold: pauses serial communication without deselecting the device; during Hold, Q is high impedance and D and C are Don't Care. |+| 8 | VCC | power_in | Supply voltage, 1.7 V to 5.5 V for M95M01-DF, which must be stable and valid during all operations and decoupled with 10 nF to 100 nF close to the pins. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | TSSOP-8 |+| Category | Memory |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `M95M01-DFDW6TP`+- Footprint: `Package_SO:TSSOP-8_3x3mm_P0.65mm`+- 3D model: TSSOP-8 (KiCad packages3D, STEP)+- 3D model files: `m95m01-dfdw6tp-etched.step` / `m95m01-dfdw6tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m95m01-dfdw6tp.step` / `m95m01-dfdw6tp.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588885012146237440) (53 pp, sha256 `323ad6b5a1d5fe41`, retrieved 2026-10-06, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/m95m01-dfdw6tp-datasheet.pdf)
page.jsonadded+160@@ -0,0 +1,160 @@+{+ "slug": "m95m01-dfdw6tp",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics EEPROM, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "memory",+ "m95m01-dfdw6tp",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "m95m01-dfdw6tp.kicad_sym",+ "m95m01-dfdw6tp.kicad_mod",+ "m95m01-dfdw6tp.glb",+ "m95m01-dfdw6tp.step",+ "m95m01-dfdw6tp.lbr",+ "docs/hero.png",+ "docs/m95m01-dfdw6tp-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "m95m01-dfdw6tp-hero.glb",+ "m95m01-dfdw6tp-hero.overlay.json"+ ],+ "component": {+ "mpn": "M95M01-DFDW6TP",+ "manufacturer": "STMicroelectronics",+ "package": "TSSOP-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "EEPROM",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588885012146237440",+ "parts": {+ "symbol": "m95m01-dfdw6tp.kicad_sym",+ "footprint": "m95m01-dfdw6tp.kicad_mod",+ "model_3d": "m95m01-dfdw6tp-hero.glb",+ "model_3d_plain": "m95m01-dfdw6tp.glb",+ "model_3d_step": "m95m01-dfdw6tp-etched.step",+ "model_3d_step_plain": "m95m01-dfdw6tp.step",+ "lbr": "m95m01-dfdw6tp.lbr"+ },+ "distributor_links": {+ "lcsc": 221464,+ "digikey": "497-15781-2-ND",+ "mouser": "511-M95M01-DFDW6TP"+ },+ "distributor_check": {+ "checked_at": "2026-10-06T17:20:42Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-15781-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "511-M95M01-DFDW6TP",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "S",+ "type": "input",+ "description": "Active-low Chip Select: high deselects the device and puts Q in high impedance (Standby mode), low selects it (Active mode); a falling edge is required after power-up before any instruction."+ },+ {+ "number": "2",+ "name": "Q",+ "type": "output",+ "description": "Serial Data Output: data is shifted out on the falling edge of Serial Clock C, and the pin is high impedance when deselected or in the Hold condition."+ },+ {+ "number": "3",+ "name": "W",+ "type": "input",+ "description": "Write Protect: freezes the size of the memory area protected by the BP1/BP0 bits and must be driven high or low and be stable during all Write instructions."+ },+ {+ "number": "4",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground, the reference for all signals including the VCC supply voltage."+ },+ {+ "number": "5",+ "name": "D",+ "type": "input",+ "description": "Serial Data Input: receives instructions, addresses and data to be written, latched on the rising edge of Serial Clock C."+ },+ {+ "number": "6",+ "name": "C",+ "type": "input",+ "description": "Serial Clock: provides the timing of the serial interface, with inputs latched on the rising edge and Q changing from the falling edge; up to 16 MHz."+ },+ {+ "number": "7",+ "name": "HOLD",+ "type": "input",+ "description": "Hold: pauses serial communication without deselecting the device; during Hold, Q is high impedance and D and C are Don't Care."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage, 1.7 V to 5.5 V for M95M01-DF, which must be stable and valid during all operations and decoupled with 10 nF to 100 nF close to the pins."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin order (1-8) derived from standard 8-pin SPI EEPROM conventions; Figure 2 (PAGE 7) which shows de"+ ],+ "pages_sent": 26,+ "cost_usd": 0.4566,+ "at": "2026-10-06T17:20:29"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588885012146237440",+ "pages": 53,+ "sha256": "323ad6b5a1d5fe41",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}