← Commit history

Initial commit: component/m95640-wmn6tp

Ray ·239cb52f0b ·
2 files changed +185
README.mdadded+44
@@ -0,0 +1,44 @@+# M95640-WMN6TP++**STMicroelectronics** · EEPROM · SOIC-8++M95640-WMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | S | input | Chip Select: when driven high the device is deselected and Serial Data Output (Q) goes to high impedance (Standby Power mode unless an internal write is in progress); driving S low selects the device (Active Power mode) and a falling edge on S is required before any instruction after power-up. |+| 2 | Q | output | Serial Data Output: used to transfer data serially out of the device; data is shifted out MSB first on the falling edge of Serial Clock (C), and is high impedance when S is high or during Hold. |+| 3 | W | input | Write Protect: freezes the size of the memory area protected against Write instructions as set by the BP1/BP0 bits of the Status Register; must be driven high or low and held stable during all Write instructions, and together with the SRWD bit enables the Hardware Protected mode. |+| 4 | VSS | power_in | Ground: reference for all signals, including the VCC supply voltage. |+| 5 | D | input | Serial Data Input: used to transfer instructions, addresses and data to be written into the device; values are latched MSB first on the rising edge of Serial Clock (C). |+| 6 | C | input | Serial Clock: provides the timing of the serial interface (high-speed clock up to 20 MHz); input data on D is latched on the rising edge and output data on Q changes on the falling edge of this clock. |+| 7 | HOLD | input | Hold: used to pause serial communication with the device without deselecting it; while HOLD is low (with S already low and C low) Q is high impedance and D and C are Don't Care. |+| 8 | VCC | power_in | Supply voltage input, specified as 2.5 V to 5.5 V for the M95640-W device grade, which must remain stable within the valid operating range during all operations. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOIC-8 |+| Category | Memory |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `M95640-WMN6TP`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `m95640-wmn6tp-etched.step` / `m95640-wmn6tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m95640-wmn6tp.step` / `m95640-wmn6tp.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588879827865128960) (53 pp, sha256 `6b136d5d2ea5ba78`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/m95640-wmn6tp-datasheet.pdf)
page.jsonadded+141
@@ -0,0 +1,141 @@+{+  "slug": "m95640-wmn6tp",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "m95640-wmn6tp",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "m95640-wmn6tp.kicad_sym",+    "m95640-wmn6tp.kicad_mod",+    "m95640-wmn6tp.glb",+    "m95640-wmn6tp.step",+    "m95640-wmn6tp.lbr",+    "docs/hero.png",+    "docs/m95640-wmn6tp-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "M95640-WMN6TP",+    "manufacturer": "STMicroelectronics",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Memory",+    "subcategory": "EEPROM",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588879827865128960",+    "parts": {+      "symbol": "m95640-wmn6tp.kicad_sym",+      "footprint": "m95640-wmn6tp.kicad_mod",+      "model_3d": "m95640-wmn6tp-etched.glb",+      "model_3d_plain": "m95640-wmn6tp.glb",+      "model_3d_step": "m95640-wmn6tp-etched.step",+      "model_3d_step_plain": "m95640-wmn6tp.step",+      "lbr": "m95640-wmn6tp.lbr"+    },+    "distributor_links": {+      "lcsc": "C140882"+    },+    "pins": [+      {+        "number": "1",+        "name": "S",+        "type": "input",+        "description": "Chip Select: when driven high the device is deselected and Serial Data Output (Q) goes to high impedance (Standby Power mode unless an internal write is in progress); driving S low selects the device (Active Power mode) and a falling edge on S is required before any instruction after power-up."+      },+      {+        "number": "2",+        "name": "Q",+        "type": "output",+        "description": "Serial Data Output: used to transfer data serially out of the device; data is shifted out MSB first on the falling edge of Serial Clock (C), and is high impedance when S is high or during Hold."+      },+      {+        "number": "3",+        "name": "W",+        "type": "input",+        "description": "Write Protect: freezes the size of the memory area protected against Write instructions as set by the BP1/BP0 bits of the Status Register; must be driven high or low and held stable during all Write instructions, and together with the SRWD bit enables the Hardware Protected mode."+      },+      {+        "number": "4",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground: reference for all signals, including the VCC supply voltage."+      },+      {+        "number": "5",+        "name": "D",+        "type": "input",+        "description": "Serial Data Input: used to transfer instructions, addresses and data to be written into the device; values are latched MSB first on the rising edge of Serial Clock (C)."+      },+      {+        "number": "6",+        "name": "C",+        "type": "input",+        "description": "Serial Clock: provides the timing of the serial interface (high-speed clock up to 20 MHz); input data on D is latched on the rising edge and output data on Q changes on the falling edge of this clock."+      },+      {+        "number": "7",+        "name": "HOLD",+        "type": "input",+        "description": "Hold: used to pause serial communication with the device without deselecting it; while HOLD is low (with S already low and C low) Q is high impedance and D and C are Don't Care."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage input, specified as 2.5 V to 5.5 V for the M95640-W device grade, which must remain stable within the valid operating range during all operations."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 53,+        "cost_usd": 0.4668,+        "at": "2026-09-23T08:49:25"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588879827865128960",+        "pages": 53,+        "sha256": "6b136d5d2ea5ba78",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file