← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# M95512-WMN6TP++**STMicroelectronics** · EEPROM · SOIC-8++M95512-WMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | S | input | Chip Select (active-low). Driven Low to select the device and start any instruction; Low->High deselects and places Q in high impedance. Edge-sensitive at power-up: a falling edge must be seen after VCC reaches POR before the first operation. |+| 2 | Q | output | Serial Data Output (MISO). Data is shifted out MSB-first on the falling edge of Serial Clock (C). High impedance when the device is deselected or in Hold. |+| 3 | W | input | Write Protect (active-low). Combined with the SRWD bit of the Status Register to enter the Hardware Protected Mode (HPM), freezing the size of the write-protected memory area defined by BP1/BP0. Must be driven High or Low and stable during all write instructions. |+| 4 | VSS | power_in | Ground reference for supply and all logic signals. |+| 5 | D | input | Serial Data Input (MOSI). Instructions, addresses and write data are shifted in MSB-first and latched on the rising edge of Serial Clock (C). |+| 6 | C | input | Serial Clock. Provides timing for the serial interface up to 10 MHz. Input data on D is latched on the rising edge; output data on Q changes after the falling edge. Supports SPI modes (CPOL,CPHA) = (0,0) or (1,1). |+| 7 | HOLD | input | Hold (active-low). Pauses serial communications without deselecting the device. During Hold, Q is high impedance and D and C are Don't Care. Device must be selected (S Low) to enter Hold. |+| 8 | VCC | power_in | Supply voltage. 2.5 V to 5.5 V for M95512-W ('-W' suffix in the MPN). A stable, valid VCC above the Power-On-Reset threshold must be applied before any logic signal is applied. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOIC-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `M95512-WMN6TP`+- `M95512-WMN6TPDW6`+- `M95512-WMN6TPDW6T`+- `M95512-WMN6TPDW6TP`++## CAD (KiCad official)++- Symbol: `M95512-WMN6TP`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](docs/m95512-wmn6tp-datasheet.pdf) (31 pp, sha256 `9ce19768858181f2`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/m95512-wmn6tp-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "m95512-wmn6tp",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "memory",+ "m95512-wmn6tp"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "m95512-wmn6tp.kicad_sym",+ "m95512-wmn6tp.kicad_mod",+ "m95512-wmn6tp.glb",+ "m95512-wmn6tp.step",+ "m95512-wmn6tp.lbr",+ "docs/hero.png",+ "docs/m95512-wmn6tp-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}