← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "m95512-wmn6tp",+ "title": "M95512-WMN6TP",+ "brief": "STMicroelectronics EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "STMicroelectronics EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "memory", "m95512-wmn6tp" ],+ "component": {+ "mpn": "M95512-WMN6TP",+ "manufacturer": "STMicroelectronics",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "EEPROM",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/a5c27ee3fa51483a9fa123bba0c6d227.pdf",+ "parts": {+ "symbol": "m95512-wmn6tp.kicad_sym",+ "footprint": "m95512-wmn6tp.kicad_mod",+ "model_3d": "m95512-wmn6tp.glb",+ "model_3d_step": "m95512-wmn6tp.step",+ "lbr": "m95512-wmn6tp.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "S",+ "type": "input",+ "description": "Chip Select (active-low). Driven Low to select the device and start any instruction; Low->High deselects and places Q in high impedance. Edge-sensitive at power-up: a falling edge must be seen after VCC reaches POR before the first operation."+ },+ {+ "number": "2",+ "name": "Q",+ "type": "output",+ "description": "Serial Data Output (MISO). Data is shifted out MSB-first on the falling edge of Serial Clock (C). High impedance when the device is deselected or in Hold."+ },+ {+ "number": "3",+ "name": "W",+ "type": "input",+ "description": "Write Protect (active-low). Combined with the SRWD bit of the Status Register to enter the Hardware Protected Mode (HPM), freezing the size of the write-protected memory area defined by BP1/BP0. Must be driven High or Low and stable during all write instructions."+ },+ {+ "number": "4",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference for supply and all logic signals."+ },+ {+ "number": "5",+ "name": "D",+ "type": "input",+ "description": "Serial Data Input (MOSI). Instructions, addresses and write data are shifted in MSB-first and latched on the rising edge of Serial Clock (C)."+ },+ {+ "number": "6",+ "name": "C",+ "type": "input",+ "description": "Serial Clock. Provides timing for the serial interface up to 10 MHz. Input data on D is latched on the rising edge; output data on Q changes after the falling edge. Supports SPI modes (CPOL,CPHA) = (0,0) or (1,1)."+ },+ {+ "number": "7",+ "name": "HOLD",+ "type": "input",+ "description": "Hold (active-low). Pauses serial communications without deselecting the device. During Hold, Q is high impedance and D and C are Don't Care. Device must be selected (S Low) to enter Hold."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage. 2.5 V to 5.5 V for M95512-W ('-W' suffix in the MPN). A stable, valid VCC above the Power-On-Reset threshold must be applied before any logic signal is applied."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/a5c27ee3fa51483a9fa123bba0c6d227.pdf",+ "pages": 31,+ "sha256": "9ce19768858181f2",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "STMicroelectronics",+ "Package": "SOIC-8",+ "Category": "Memory",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "m95512-wmn6tp"+ ],+ "discovery_pitch": "M95512-WMN6TP (STMicroelectronics) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/m95512-wmn6tp-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }